REPAIRS TO DOORS AND WINDOWS OF ANY TYPE, FALSE CEILING IN OTM AND MD ACCN AT AFS BEGUMPET UNDER GE(AF) HAKIMPET

Amount

Taking down Chowkats or frames not exceeding 1.5 Sqm each (Without taking off shutters from the frames)

Taking down and removing to or from stores Chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each (Without taking off shutters from the frame)

Taking down shutters of any description not exceeding 1 Sqm each

Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each

Resecuring or easing and adjusting without taking down shutters of any description exc 1 sqm but n exc 2 sqm each

S & F 2nd class hard wood plain, solid straight chowkats and frame, wrought framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete including treating the back of chowkaths with coal tar black paint

Supply and fixed Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed of size 105X60mm

Supply and fixed Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed of size 125X60mm

M&L for PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in filling in pressed steel door frames complete or hold fast block all as specified and directed.

Cutting holes in brick walls Not exc. half brick in cement mortar or cement lime mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required

S & F Solid PVC Door Frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with M S Square tube,supplying and fixing in opening as per manufacturers instructions and as directed by Engineer-in-Charge.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F 35mm thick plain framed factory made panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated second class hard wood rail and style all specified and as directed.

S & F, 35mm thick, factory made 2nd class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fixed to chowakat 2nd class hard wood rail and style all as specified and as directed.

S& F 30 mm thick window/ventilator shutters second class hard wood glazed/skelton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (b); all as specified and as directed.

S&F 40mm thick flush shutter factroy made solid core construction with block board core and ply wood face panels commercial type on both sides all as specified and directed.

S&F 2nd class hard wood in fillets,squre, rectangular in section wrought, secured with nails sectional area exc 13 Sqcm and n.exc 25 Sqcm fixed in repairs.

S & F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

S & F in repairs Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

M&L Preparatioin of new wooden surfaces of any description over 10CM width or girth and applying two coats of synthetic enamel paint over a coat pink primer.

M&L for preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint (Ordinary tint).

S&F 300mm ISI marked long Aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy.

S&F 300mm in repairs long ISI marked Aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy.

S&F 150mm long aluminium anodised ISI marked barrel tower bolt of extruded section.

S&F 150mm in repairs long aluminium anodised ISI marked barrel tower bolt of extruded section.

S&F 100mm long aluminium anodised ISI marked barrel tower bolt of extruded section.

S&F 100mm in repairs long aluminium anodised ISI marked barrel tower bolt of extruded section.

S & F 150mm long extruded aluminium alloy ISI marked handles fabricated type anodised.

S & F 150mm in repairs long extruded aluminium alloy ISI marked handles fabricated type anodised.

S & F 100mm long extruded aluminium alloy ISI marked handles fabricated type anodised.

S & F 100mm in repairs long extruded aluminium alloy ISI marked handles fabricated type anodised.

S&F 100mm long MS butt hinges, medium weight cold rolled.

S&F 75mm long MS butt hinges, medium weight cold rolled.

S & F, 300mm long MS ordinary rat tail rod pattern springs inc. roller & roller plate complete Make:- Crown/Swastik

S & F, 300mm long MS ordinary rat tail rod pattern springs inc. roller & roller plate complete as in repairs Make: Crown/Swastic

Supply and fix Floor door stopper of aluminum alloy body and tongue, anodised with hard drawn steel spring of 150mm long

Supply and fix in repairs Floor door stopper of aluminum alloy body and tongue, anodised with hard drawn steel spring of 150mm long

S&F MS Framed work such as grills or gratting etc with ends of bars welded of any size and any design including welding all as directed of Fe 290 Grade E-165.

S&F mild steel flat iron hold fast of any size and similar articles confirming Fe 290 Grade E-165.

S & F, steel windows with side hung shutters including projecting type hinges with steel handle & steel peg stay, complete with glazing bars, dovetailed or welded including taking down the old window.

.- ditto but with out glazing bar

S & F, steel ventilators with top hung shutter including projecting type hinges with steel handle & steel peg stay, complete with glazing bars, dovetailed or welded including taking down the old window.

M&L Preparing new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames or stone, concrete or bricks surrounds, glazed with putty or fixed with beads

S&F 5.5mm thick sheet glass ordinary quality fixing with putty/beading/clips in size not execeeding 0.5 sqm in each pane.

S&F 4mm thick sheet glass ordinary quality fixing with putty/beading in square not execeeding 0.5 sqm in each pane.

-ditto- All as per item No above but figured glass, pin head type.

S & F Anodised aluminium frame for doors, windows ventilators with one or more rebets including jointing cleats for fixing etc complete all as specified

S&F anodised aluminium door shutter, aluminium section weighing 0.55 Kg per M including necessary jointing cleats, glazing clips rubber neoprene packing, handles 2 nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified

S & F Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 100mm long (2 no.) suitable handle (1 no.) complete all as specified

S & F MS Mortice lock 4 leavers vertical type size 100mm

-do- all as above but supply and fixed in repairs.

S & F Aluminium (Die cast ) body door closer hydrolically regulated designation No.3 universal type suitable for door shutters of 851 to 1000mm in width and wt between 61 to 80 kgs.

All as above but Supply and fixing in repairs.

M & L for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed in repairs

S & F 12mm thick prelaminated particle board interrior grade prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with glazing clips

M & L 12mm thick Plywood, grade BWR type BB fixed with screws to timber frame work

S & F in repairs 0.56mm thick plain aluminium sheeting, Alloy 31000H4 as in bottom portion of door shutters complete all as specified and directed.

Taking out the rolling shutters of any size and type, including top cover guide channel, etc carrying out repairs and replacement of spares such as bearing and spring etc. required for smooth functioning as directed by Engineer-in-Charge and re-fixing the same with applying grease/ oil etc including applying one coat of synthetic enamel paint all as specified and as directed.

Taking down old pelmet box/curtain rod of any description and any size complete all as specified and directed.

M & L for 25mm dia Stainless Steel Curtain Rod fancy type complete all as specified and directed

M & L in repair for Brackets, Ends Cap and Holder suitable for 25mm dia Stainless Steel Curtain Rod fancy type complete all as specified and Approved

S & F MS framed work as in doors of angle (or) other sections with gusset plate rails braces etc complete drilled for fixing of steel sheeting (or) other covering to doors etc to be prepared for hanging (or) sliding with and including either hooks and pintel hinges (or) steel hanging door etc. including covering sheet complete all as specified and directed by Engineer-in-charge.

Taking down cupboard shutter with sheleves cub boards exc 2 sq mtr each (One cupboard set) of any type complete all as specified and as directed by the Engineer-in-Charge.

Taking down chowkhats with cupboard shutter ( without taking off shutters from the frame) exc 1.50 Sqm but n. exc 4 Sqm each including sheleves cub boards (One cupboard set) of any type complete all as specified and as directed by the Engineer-in-Charge.

S&F 18/19 mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice laminated sheet , fixed with screws to timber frame work complete all as specified and as directed by the Engineer-in-Charge.

S&F 18/19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice laminaion & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed by the Engineer-in-Charge.

S&F 12 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice laminated & other side balancing, white lamination, fixed with screws to timber frame work. complete all as specified and as directed by the Engineer-in-Charge.

S&F teak wood lipping, 6 mm thick,fixed with nails complete 18/19 mm width 1st class teak wood all as specified and as directed by the Engineer-in-Charge.

S&F continuous (piano) hinges, mild steel, bright finish or electro galvanised width of flap 40 mm complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing 100 mm size hasp and staple, hinge type aluminium anodised complete all as specified and as directed by the Engineer-in-Charge.

S&F stainless steel plate rack of minimum size 970X770X230mm of standard quality,fixed to wall with wooden gutties and screws complete all as specified and directed including taking down old steel plate rack.

Taking down door shutters aluminium or any type of doors with or without frame and keep aside safely and refixing the same in the same opening all as directed.

M&L welding in repairs n. exc 2.50 cm in length, thickness of metal to be welded exc 6 mm but n. exc 9 mm complete all as specified and as directed by the Engineer-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing debris outside MD land.serviceable tiles to store and rubbish off the premises.

M&L for 15mm thick Screed bed or bedding layer for laying floor finishes in CM 1:6

M&L for non skid coloured ceramic tiles 7 to 8mm thick (square or rectangular) area of each tile exceeding 0.06 Sqm but not exc 0.11 sqm in floors set and jointed in neat cement slurry and pointed in coloured cement to match the shade using coloured tiles.

M&L for 10mm thick rendering in CM 1:4 on brick or concrete surfaces as in backing coat to receive tile finish as in skirting and dados

M&L for glazed ceramic coloured tiles in vertical surfaces 300x200x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match

Dismantling ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets.

S&F Anodised aluminium snap grid frame work size 605 x 605mm for false ceiling and Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long including cutting holes in brick walls not exc. half brick in cement mortar or cement lime mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required and S & F 4mm thick non asbestos fibre cement buildings boards fixed or laid/inserted to timber/GI/aluminium frame work in ceiling with screws and finishing surface with applying two coats of OBD complete all as specified and directed.

M&L for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre including S&F 12mm thick Seamless calcium silicate ceiling made out of 1800x1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to ceiling section with 25 mm long self drilling and tapping screws to GI frame work including finishing ceiling surface with applying two coats of OBD complete all as specified and as directed by Engineer-in-Charge.

Taking down cement or cement lime plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc.

M & L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6

M&L for preparing newly plastered surfaces of walls and applying three coats of white wash.

DWARKA PERSHAD RADHEY RAMANLAL