CONSTRUCTION OF BRICK WORK, PLASTERING, PANELING, PAINTING AND ALLIED AUGMENTATION WORKS IN CHEMISTRY WING AT MAIN BUILDING, IISER PUNE

Brick work with non modular fly ash bricks conforming to IS:12894,class designation 10 average compressive strength in super structure above plinth level up to floor V level in : Cement mortar 1:4 (1 cement : 4 coarse sand). Quoted rate shall be including labour,material, tools, GST etc complete. Nothing extra shall be paid separately.

Providing and applying 12 mm thick (average) premixed formulated one coat gypsum lightweight plaster having additives and light weight aggregates as vermiculite/ perlite respectively conforming to IS: 2547 (Part - 1 & II) 1976, applied on hacked / uneven background such as bare brick/ block/ RCC work on walls & ceiling at all floors and locations, finished in smooth line and level etc. complete. Quoted rate shall be including labour,material, tools, GST etc complete. Nothing extra shall be paid separately.

Providing and applying 6 mm thick (average) premixed formulated one coat gypsum lightweight plaster having additives and light weight aggregates as vermiculite/ perlite respectively conforming to IS: 2547 (Part - 1 & II) 1976, applied on hacked / uneven background such as bare brick/ block/ RCC work on walls & ceiling at all floors and locations, finished in smooth line and level etc. complete. Quoted rate shall be including labour,material, tools, GST etc complete. Nothing extra shall be paid separately.

Dismantling aluminum/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in campus lead as directed by Engineer-in-charge. Quoted rate shall be including labour,material, tools, GST, removal of debris and disposal within campus etc complete. Nothing extra shall be paid separately.

Refixing of grid for false ceiling including using serviceable material and additional new L angle , Tees as directed by Engineer-in-charge to form grid of 595X595mm ready for laying ceiling tile. Quoted rate shall be including making appropriate arrangement around cassette air conditioner. Quoted rate shall be including labour,material, tools, GST etc complete. Nothing extra shall be paid separately.

Refixing of Ceiling tiles for false ceiling by using serviceable material as directed by Engineer-in-charge. Quoted rate shall be including labour,material, tools, GST etc complete. Nothing extra shall be paid separately.

Providing and fixing of Ceiling tiles for false ceiling by of Biogurad series Armstrong similar to existing tiles as directed by Engineer-in-charge. Quoted rate shall be including labour,material, tools, GST etc complete. Nothing extra shall be paid separately.

Providing & fixing false ceiling at all height including providing & fixing of framework made of special section, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleat of size 25mm wide x 1.6mm thick with flanges of 27mm and 37mm, at 1200mm c/c, one flange fixed to the ceiling with dash fastener 12.5mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25 x10 x0.50mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I channels 45 x15 x 0.90mm running at the spacing of 1200 mm c/c, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having lips of 10.5mm, at 450mm c/c, shall be fixed in a direction perpendicular to G.I intermediate channel with connecting clip made out of 2.64mm dia x 230mm long G.I wire at every junction, including fixing perimeter channels 0.50mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/ partitions with the help of Rawl plugs at 450mm centre, with 25mm long dry wall screws @ 230mm interval, including fixing of Calcium Silicate Board to ceiling section and perimeter channels with the help of dry wall screws of size 3.5 x25mm at 230mm c/c, including jointing & finishing to a flush finish of tapered and square edges of the board with recommended jointing compounds, jointing tapes,finishing with jointing compounds in three layers covering up to 150mm on both sides of joints and two coats of primer suitable for boards, all as per manufacture's specification and also including the cost of making opening for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in charge but excluding the cost of painting with: 8 mm thick Calcium Silicate Board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process. Quoted rate shall be including labour,material, tools, GST etc complete. Nothing extra shall be paid separately.

Providing and fixing, in position concealed G.I. section for wall paneling using board of required thickness fixed on the 'W' profile (0.55 mm thick) having a knurled web of 51.55 mm and two flanges of 26 mm each with lips of 10.55 mm, placed @ 610 mm C/C in perimeter channel having one flange of 20 mm and another flange of 30 mm with thickness of 0.55 mm and web of length 27 mm. Perimeter channel is fixed on the floor and the ceiling with the nylon sleeves @ 610 mm C/C with fully threaded self-tapping dry wall screws. Board is fixed to the 'W' profile with 25 mm countersunk ribbed head screws @ 200 mm C/C., all complete as per the drawing & directions of engineer-in-charge, the joints of the boards are finished with specially formulated jointing compound and 48mm wide jointing tape to provide seamless finish. 10mm thick Tapered edge calcium silicate board made with calcareous & siliceous materials reinforced with cellulose fiber manufactured through autoclaving process to give stable crystalline structure with compressive strength 225 kg/ sq.cm, Bending strength 100 kg/sq.cm.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10 mm to 25 mm.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colors and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

Manual removal of debris , cleaning , removal of soot , cleaning of walls, glass , flooring , removal of unserviceable material , lead lift of debris to ground floor , removal of false ceiling or cleaning of terrace , removal of material or any work assigned by Engineer In-charge of manning nature. Quoted rate shall be including cost of labour , material , GST etc complete. Nothing extra shall be paid separately. Payment shall be made as per log sheet approved by Engineer In-charge. Volume of debris shifted downstairs shall be measured for payments.

Deployment of Tempo ( 407 )/tractor trolley and adequate Manpower for Shifting of debris , unserviceable material to IISER Scrap yard or dumping yard as per site requirement. Material to be collected from corridors of Main Building ( G+2 ) as per directions of Engineer In-charge , unserviceable material to be shifted to scrap yard. Quoted rate shall be including the hire charges, labours, transport, fuel , tools tackles, operators charges etc , insurance of equipment and operator, etc. complete. Copy of valid license shall be available with the driver along with the Registration Certificate ( RC ) copy and shall be submitted to IISER Pune for records. Nothing extra shall be paid separately. Actual number of trips as per Log Sheet duly approved by Engineer In-charge or his representative shall be measured for payments. Agency shall maintain log-sheet of deployment and get daily certified from department on same day and shall be submitted along with running account bill for payments. Quoted rate shall be including cost of labour , tools , GST ,taxes , minimum labour wages , etc complete. Nothing extra shall be payable separately. Minimum volume to be shifted shall be 1 brass unit.

Mechanically and manual cleaning of soot affected area with mechanical means by using water jet/vacuum/pressurized air and cleaning tools , mechanical suction machine with collection facility etc complete to ensure clean slab /wall bottom and make it ready to for painting. Quoted rate including disposal of collected soot at appropriate place within campus. Disposal of debris within on approved dumping ground in campus as per instruction of Engineer In-charge. Nothing extra shall be paid separately. All fume hoods , tables , instrument benches, windows, doors,glass,ducts to be cleaned. Actual area cleaned shall be measured for payments.

Providing and fixing aluminum chequred plates or extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminum sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) .Quoted rates shall be including GST , labour, lead , lift , transportation etc complete. Nothing extra shall be paid separately. Approved Make JINDAL/BARUKA/Indian Aluminum Co. Quoted rates shall be including GST , labour, lead , lift , transportation etc complete. Nothing extra shall be paid separately. Work shall be including removing existing block board and refixing PVC floor mat.

Supply and installation of Self adhesive aluminum foil bitumen waterproof membrane of 1.5mm thick multilayer bitumen membrane waterproofing over pre-coated sheet at IISER Pune. Bitumen membrane shall have first layer of high resign adhesive designed for pre-coated sheet roofing , second layer of asphalt and third layer of aluminum foil. Sheet shall have roll form , with one side protected with polyethane cover for adhesion. Provision of active joint of 50mm with adhesive shall be built in to the sheet throughout the length. Work shall be executed as per below listed method and OEM’s standard installation instructions, 1. Cleaning of surface to make it free from dirt and dust. 2. Bitumen sheet roll of appropriate side and paste on the surface as per profile of sheets. 3. First round : Application of sheet on roofing sheet ensuring appropriate overlap of minimum 100mm at horizontal and vertical joints.4. Pressing of sheet by rubberized roller or rammer properly on the roofing sheet such that bitumen membrane shall follow sheet profile.5. Final pressing of sheet, rounding of corners. 6. Second Round : Shall be within a week after application of rolling sheet on sunny day to ensure perfect adhesion of sheet with roofing.7. Special care shall be taken at rounded area’s , at bases wind fans etc. Quoted rate shall be including cost of lead , lift , transportation , working at ladder connected heights , GST , transportation , taxes , duties , wastage etc complete. Nothing extra shall be paid separately. Actual surface area waterproofing done at site shall be measured for payments. In case of profile roofing sheets actual area of application including slanting sides of pitches shall be measured for payments. Bidder to furnish Bond guarantee as per CPWD format for the area of work measured. Approved Makes : 'Sikha /Peel and Seal'

Buffing of existing SS staircase railing with mirror polish finish and costing buffed surface with removable transparent cover strip. Length of railing buffed including members and baluster in measured length shall be paid.

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered including fixing accessories such as nuts, bolts, fasteners etc.).Quoted rate shall be including labour,material, tools, GST etc complete. Nothing extra shall be paid separately.

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminum sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion , Anodized aluminum (anodized transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

Demolishing brick work manually/ by mechanical means of shafts at all heights including stacking of serviceable material and disposal of unserviceable material within campus lead as per direction of Engineer-in-charge. In cement mortar

Providing and fixing aluminum louvers work for ventilators with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminum sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) . For fixed portion. Anodized aluminum (anodized transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade (AC 15)Quoted rate shall be including labour,material, tools, GST etc complete. Nothing extra shall be paid separately.

Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 meters lead. Quoted rate shall be including labour, tools, GST etc complete. Nothing extra shall be paid separately.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Quoted rate shall be including labour, tools, GST etc complete. Nothing extra shall be paid separately.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes. Quoted rate shall be including labour, tools, GST etc complete. Nothing extra shall be paid separately.

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. Quoted rate shall be including labour, tools, GST etc complete. Nothing extra shall be paid separately.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer. Quoted rate shall be including material, labour, tools, GST etc complete. Nothing extra shall be paid separately.

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One or more coats on old work. Quoted rate shall be including material, labour, tools, GST etc complete. Nothing extra shall be paid separately.

Finishing walls with water proofing cement paint of required shade , Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 liters/10 sqm complete including cost of Priming coat. Quoted rate shall be including material, labour, tools, GST etc complete. Nothing extra shall be paid separately.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work. Quoted rate shall be including material, labour, tools, GST etc complete. Nothing extra shall be paid separately.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. Quoted rate shall be including material, labour, tools, GST etc complete. Nothing extra shall be paid separately.

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work. Quoted rate shall be including material, labour, tools, GST etc complete. Nothing extra shall be paid separately.

Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface. Quoted rate shall be including material, labour, tools, GST etc complete. Nothing extra shall be paid separately.

Providing and fixing blinds in approved shade and pattern, actual area of blind provided at site shall be measured for payments. Quoted rate shall be including material, labour, tools, GST etc complete. Nothing extra shall be paid separately.

Providing and fixing frosted film on glass windows as per approved pattern and design. Quoted rate shall be including material, labour, tools, GST etc complete. Nothing extra shall be paid separately. Approved Makes : Garware

Providing and applying damp Proof waterproofing coat along with two coats of Damp block ( Epoxy+hardner ) applied by mixing of two components without dilation at terrace and parapets , over two coat application of damp block two coat Damp proof coat white factory mixed application coating shall be done in high sheen thick coat without dilution. All joints on terrace / tiles / parapets/pedestals shall be sealed with Smartcare Damp Proof , joint shall be treated with 75mm wide band in two coat application by brush , after 12 hours overall first coat damp proof coat without dilution shall be made by roller application. second coat shall be done after complete 8 hours drying of first roller application. Technical details as per manufacturers specifications brush finish including preparation of surface by scrubing, removing dust , cleaning surface with water etc complete. Quoted rate shall be including smoothing , leads and lift, labour , cleaning , transpiration and cost of all materials etc complete as per direction of Engineer-in-charge. (Nothing extra shall be paid separately) : Two Coat application. Approved Makes Nerolac/Dulux/Asian.

Providing and fixing glass door of 12mm thick toughen glass with appropriate provisions for handle , patch fitting and lock. Bidder to check actual required sizes and templates of provisions of fittings and order glass accordingly. Quoted rate is including cost of transpiration , lead , lift, etc complete. Nothing extra shall be paid separately.

Providing and filling of acrylic mortar in the cracks in external walls at any heights upto 36 meters ( G+4 ) with Sika cracksil Acrylic paste / Dr.fixit crack-X paste or equivalent (ready to use paste) prepare surface by cleaning and applying Dr. Fixit prime seal or equivalent, & making sure that crack is totally filled up tooling the surface to obtain an even smooth finish including curing of the cracks for all lift , scaffolding , hanging platform etc complete , providing and applying Water proofing treatment on walls with two or more coats of SIKA Raintite-I or equivalent @ 2.25Kg/10 sqm mixed with water and white cement etc. and finishing walls with 100mm band of Acrylic Smooth exterior paint of required shade: (One or more coat applied @ 0.90 ltr/10 sqm) complete . Quoted rate shall be including working at any height by using swing or suitable arrangement to reach inaccessible location etc complete. L1 bidder to ensure safety of workers during working, adequate safety harness and safety guard rope shall be provided to the working team, main contractor to ensure floor wise safety rope arrangement and fall arrester system ensuring safe working conditions. Insurance of each working team member equal to the cost of bid shall be drawn accordingly, bidder to visit site and understand risk and cost of work. Quoted rate shall be including GST , transportation , lead , lift , scaffolding etc complete. Nothing extra shall be paid separately.

ORIENTAL INTEGRATED FACILITY MANAGEMENT PVT. LTD.