PROVN OF 150 METER CHAIN LINK FENCING AT SONEGAON NAGPUR

Amount

Excavation in post holes (or similar holes) in soft/ loose soil each hole n. exc. 0.5 cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers n. exc. 25cm, watering and removing surplus soil to a distance n. exc. 50m and making good surfaces complete all as specified and directed.

Excavation in trenches in soft/ loose soil n. exc. 1.50m wide and n. exc. 1.50m deep for foundation, or for shafts, wells, cesspits, manholes, etc., n. exc. 10 sqm on plan getting out complete all as specified and directed.

Removing excavated soil exceeding 250m and not exceeding 500m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed.

M&L for providing PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in foundation filling mass concrete complete all as specified and directed.

M&L for PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in coping, kerbs, channels, water troughs and the like including weathering, slightly rounded or chamfered angles and throating etc. complete all as specified and directed.

M&L for brick work with fly ash bricks, straight or curved on plan exceeding 6 metre mean radius with old size bricks built in CM 1:4 all as specified and as directed.

M&L for mild steel work as in posts and struts in nfencing including cutting tops to shape as directed drilling holes notching for wire etc flat iron fillet for securing wire mesh etc., including all necessary drilling, bolting or riveting etc., and similar work.etc and similar work conforming to Fe-290 Grade E-165 (MS pipe) complete all as specified and directed.

S&F galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.

Supply only 5mm to 10mm dia Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm and not exc 10cm long complete all as specified and directed.

Fixing only chain link fencing including line wires of any dia, any mesh size and type to any types of standards, rails, straining bolts etc including provision of binding wire complete all as specified and directed.

Supply only mild steel galvanised chain link fencing 4mm dia not exc 4.00Kg/Sqm of approved mesh size complete all as specified and directed.

Supply anf fix plain mild steel round bars of 10mm dia and over cut to length, bent to shape required for straining line wires including binding wire in fencing using Fe-410-W (Gde.E-250) quality-A or Fe290 (Gde-E-165) quality steel complete all as specified and directed.

M&L rendering 15mm thick in cement mortar (1:4) on fair faces of brick/ concrete surface and the surface finished even and smooth using extra cement complete all as specified and directed.

M&L preparation of newly plastered or previously untreated surface of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M&L preparation of new steel surfaces of any description not otherwise described not exceeding 10cm girth or width and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M/s ABHIMAN HEGDE

M/s JAYPEE ENTERPRISES

M/s Rahul Traders

Alert Multipurpose Services

M/s M.G. Hargunani