NIT NO. 8(2025-26) M-VI ITEM NO. 10

S/O Manually operated oil immersed sheet steel clad floor mounted type star delta starter as per IS: 13947(Part 1&4) with 1 No. under voltage release, 3 Nos. magnetic overload release with oil dashpot time lags 1 No. stop leaver, plain entries for PVC cables, 415V, 3 phase, 50Hz without oil filling, Heavy duty with single contact & strip wound overload coil 50 HP to 75 HP Make: Advance / Bentax or any other make approved by DJB.

Supply of Transformer oil for starter Make – Savita / Power

Testing and Commissioning of the starters first at NO LOAD and then at ON LOAD and Operations as per the satisfaction of engineer in charge.

Supply of PVC insulated copper flexible conductor single core 35 sq.mm flexible cable, 1100 volts. Make: Havells/ Grandlay/ Gloster/ Kalinga

Loading, Unloading, Cartage and Transportation charges for the above Panel up to the site including charges of heavy labour etc.

Fabrication and supply of base frame made out of Angle Iron of suitable size for fixing the above Panel and suitable for making outgoing / incoming cable entries in the panel. It should be duly painted and ready with provisions for installing at the site.

Fixing of new base frame at the site with the help of fasteners / welding and grouting of nut bolts and including all other work as per site requirements and Fixing the new L T Panel at the newly fixed base frame by lifting the panel board and placing it at the base frame properly and fixing it to the frame by nut bolts as requirement.

S/O changeover having 400 amp capacity and making the incoming connections to the Panel by making required Cable connections between the main supply and the panel after laying and proper thimbling etc. of cable including providing & fixing of consumables as per requirement.

Making the outgoing connections of MCCBs by Connecting MCCBs to the starters Through existing cables or by extending the cables as per site requirement after relaying of the cables as required, proper thimbling and tapping etc. including providing & fixing of material as per requirement.

Making the outgoing connections of Starters by Connecting starters to the Motors Through existing cables or by extending the cables as per site requirement after relaying of the cables as required, proper thimbling and tapping etc. including providing & fixing of material as per requirement.

Testing and Commissioning of the Panel Board and starters first at NO LOAD and then at ON LOAD and Operations as per the satisfaction of engineer in charge.

DEV ENGINEERS (BID ID -1600207)