Construction of Foothpath on 28.00m and 20.00m R/w Roads in Sector-23,24 25, Rohini.

Octagonal Steel Pole Supplying , installation, testing and commissioning of hot dip galvanized octagonal steel pole of 7 Mtr. height and made of 3 mm thick sheet, having bottom 130 mm OAF & top 70 mm OAF, hot dip galvanized M.S base plate of size 220 mm x 220 mm x 12 mm thick,single overhang bracket made of 3.60 mm thick hot dip galvanized M.S. pipe with 0.5 Mtr. long tube of suitable dia to accommodate the pole & fittings,on existing RCC foundation with GI bolt and nuts, making connections, interconnections with suitable size of copper wire with thimble/lugs in the connector box, earthing, marking/ numbering of pole etc.,GI Sleeve on connector box made out of 3mm thick MS sheet 250 mm wide duly welded with existing connector box cover of pole complete as per drawing & technical specifications attached including following accessories with mounted inbuilt control box having flush cover with 2 nos mounting strips with tapped holes:- (a) 6 mm thick phenolic laminated / bakelite sheet inside the window mounted on the existing mounting strips inside the flush door. (b) 4 nos. 40 Amp terminal block suitable for following conductor / cable, fixed on DIN channels i/c providing and fixing DIN channel of suitable length – on the existing phenolic laminated / bakelite sheet. (i) 16 sq mm conductor – 4 nos and short links 5-nos. (ii)Terminal suitable for 6 SWG GI wire / 1.5 sq mm wire. (c) 6 Amp SP MCB,10 kA ‘C’ Series-1 nos. including mountings on DIN channel, Earth stud 2 Nos. welded at suitable height i/c washers, springs washers & nuts etc. (d) Suitable arrangement for saddling of incoming / outgoing cables i/c lugs thimbles etc as required.

Supplying , installation, testing and commissioning of hot dip galvanized octagonal steel pole of 7 Mtr. height and made of 3 mm thick sheet, having bottom 130 mm OAF & top 70 mm OAF, hot dip galvanized M.S base plate of size 220 mm x 220 mm x 12 mm thick,double overhang bracket made of 3.60 mm thick hot dip galvanized M.S. pipe with 1.5 Mtr. long tube of suitable dia to accommodate the pole & fittings,on existing RCC foundation with GI bolt and nuts, making connections, interconnections with suitable size of copper wire with thimble/lugs in the connector box, earthing, marking/ numbering of pole etc.,GI Sleeve on connector box made out of 3mm thick MS sheet 250 mm wide duly welded with existing connector box cover of pole complete as per drawing & technical specifications attached including following accessories with mounted inbuilt control box having flush cover with 2 nos mounting strips with tapped holes:- (a) 6 mm thick phenolic laminated / bakelite sheet inside the window mounted on the existing mounting strips inside the flush door. (b) 4 nos. 40 Amp terminal block suitable for following conductor / cable, fixed on DIN channels i/c providing and fixing DIN channel of suitable length – on the existing phenolic laminated / bakelite sheet. (i) 16 sq mm conductor – 4 nos and short links 5-nos. (ii)Terminal suitable for 6 SWG GI wire / 1.5 sq mm wire. (c) 6 Amp SP MCB,10 kA ‘C’ Series-1 nos. including mountings on DIN channel, Earth stud 2 Nos. welded at suitable height i/c washers, springs washers & nuts etc. (d) Suitable arrangement for saddling of incoming / outgoing cables i/c lugs thimbles etc as required.

Foundation nuts & bolts

Providing and laying in position, M25 reinforced cement concrete foundation of size 500mm long x 500mm wide and 1400 mm deep i/c excavation of earth, refilling, providing cutting, bending and placing in position reinforcement of cold twisted bar of 12 mm dia. 1500 mm long (approx.)-8 Nos. and reinforcement ring of cold twisted bar of 8 mm dia. 2000 mm long (approx.)-8 Nos. (With approx. 150 mm spacing) i/c centering & shuttering as required, positioning of foundation bolts 4 nos. M-24x750mm long foundation bolt of L Type (100 mm bend & 750 mm straight), 150 mm top threaded portion of bolt shall be galvanized and rest portion shall be coated with Red oxide to avoid corrosion & G.I nuts (EN 8-grade) with 3 Nos. and 2 Nos. washer, along with 2 Nos. templates/Anchor plate of size 220 mm x 220 mm x 3 mm thick shall be supplied manufactured from the original pole manufacturing company only for casting of foundations and providing 63 mm (OD) 2 Nos. DWC pipe 1 mtr long approx. each for cable entry and exit etc complete as required.

Lighting Fixture

45 Watt

72 Watt

120 Watt

Wiring from pole control box to light fitting(s)