Renovation of Various Rooms at Ground floor in Pant Krishi Bhawan, Jaipur

Amount

Supplying of Office Table of Size 1500mmx900mm with Table Top of MDF Board 20mm thick, Height of Table 760mm , 3 Drawer Storage Unit Fitted with automatic locking system on One side with stainles steel keys in duplicate. Depth of Storage Unit is 557mm, Width of Storage Unit 355.5mm, Height of Storage Unit 453mm, Storage Unit Material 0.8mm thick and Drawer Material 0.63mm thick.

High Back Revolving Chair. High back chair, PU Arms, PP Base, Gas Lift, PU Molded Seat & Back Cushion, Cushioned Seat & back in fabric Tapestry. Backrest Height : 600mm, Backrest Width : 450mm, Arm Material : PVC, Chair Height : 1100mm, Seat Depth : 450mm

Medium Back Revolving Chair. Medium back chair, PU Arms, PP Base, Gas Lift, PU Molded Seat & Back Cushion, Cushioned Seat & back in fabric Tapestry. Backrest Height : 450mm, Backrest Width : 450mm, Arm Material : PVC, Chair Height : 900mm, Seat Depth : 450mm (Densite Seat and Backrest: 32 Kg/Cub.m)

S/F of Roller blinds using synthetic 100% polyster washable fabric in all colours/black out with both end rods & operating sting and all hardwares to open/close the blind complete in all respect as directed by Engineer-in-charge.

S/F Sensotronic senser fancet for basin piller cock made of C. P. brass Ist quality with all necessary fittings and hardwares complete in all respect as directed by Enginer-in-charge.

S/F Soap diapensor automatic for wash basin made of C.P. brass Ist quality with all necessary fittings and hardwares complete in all respect as directed by Enginer-in-charge.

SS1 - Single Static 1 Bay Push Pull Type Overall Dimensions of SS1 - Single Static 1 Bay Push Pull Type (U/C + Fittings)=915mm(W) x 381mm (D) x 1980mm (H). Main Body shall have Rigid Knock Down Construction made of CRCA Steel and finish is epoxy polyester powder coated . Shelf is 0.8 mm CRCA Steel with UDL 80 Kg . Undercarriage construction is Welded frame made of HR sheet 3.15 mm thk. And finish is epoxy polyester powder coat 40 microns . Fittings , Door locking , Fasteners , Guide Holder , Label holder. Overall Dimensions of SS1 - Single Static 1 Bay Push Pull Type (U/C + Fittings) shall be 915mm(W)x381mm(D)x1980mm(H). The Construction shall be rigid knock down made out of 0.8 thick CRCA steel conforming to IS : 513 . Each body shall have a main unit plus add on units (1,2,3,4,5) . Finish shall be Epoxy polyester powder coated thickness of 40 microns . Shelf construction shall be made from CRCA steel 0.8 mm thick IS :513 .Uniformly distributed load capacity of 80 Kg . Undercarriage shall have construction in welded frame made of HR sheet 3.15 mm thick conforming to IS : 10748 . Finish shall be epoxy polyester powder coat of approved color & shade with a dry film thickness of minimum 40 microns.

The movements of the system shall be Push pull configuration (TYPE-P1/TYPE-P2) : Movement of units achieved by pushing or pulling chrome plated 'C' Handle fitted onto 1.6 mm thick plate (mounted on each double & single movable units) & rigidly fixed at suitable height on body side . Each movable undercarriage has 4 nos. of antifriction ball bearings for rolling onto channels & 4 no. of antifriction ball bearings for guiding between channels & 'J' section . Fittings shall be centralized locking arrangement through locking stiffener mounted onto back of single last unit so that it gets locked on channels when all the units are brought together . The Recess handle lock is of Godrej make & placed at suitable height . This arrangement occupies a space of 90.0 mm . When the last unit is twin movable , hinged doors are provided for the end bodies, so in this case locking stiffener is mounted onto drive unit cover ; and with tile fascia option , it will be mounted in the recess of vertical trim . Each Drive Type units shall have Locking Knob near the drive wheel for manual locking of individual units when a person is using those units . Knob shall be rotated to unlock position when units are to be moved . End stoppers shall be provided to prevent derailment . Door locking shall be having hinged doors of recessed die cast handle cum lock giving 3 way locking through a lever & shooting bolts . Guide channels shall have 'J' section 2 mm thick HR & 25 mm Square bright bar . Easteners shall be galvanized/blackodized/Zn plated .The label holder shall be made from 2 mm thick c

SL1 - Single Last 1 Bay Push Pull Type Overall Dimensions of SL1 - Single Last 1 Bay Push Pull Type (U/C + Fittings + Handle)= 915mm(W)x381mm(D)x 1980mm(H). Main Body shall have Rigid Knock Down Construction made of CRCA Steel and finish is epoxy polyester powder coated . Shelf is 0.8 mm CRCA Steel with UDL 80 Kg . Undercarriage construction is Welded frame made of HR sheet 3.15 mm thk. And finish is epoxy polyester powder coat 40 microns . Fittings , Door locking , Fasteners , Guide Holder , Label holder . Overall Dimensions of SL1 - Single Last 1 Bay Push Pull Type (U/C + Fittings + Handle) shall be 915mm(W)x381mm(D)x2180mm(H). The Construction shall be rigid knock down made out of 0.8 thick CRCA steel conforming to IS : 513 . Each body shall have a main unit plus add on units (1,2,3,4,5) . Finish shall be Epoxy polyester powder coated thickness of 40 microns . Shelf construction shall be made from CRCA steel 0.8 mm thick IS :513 .Uniformly distributed load capacity of 80 Kg . Undercarriage shall have construction in welded frame made of HR sheet 3.15 mm thick conforming to IS : 10748 . Finish shall be epoxy polyester powder coat of approved color & shade with a dry film thickness of minimum 40 microns . The movements of the system shall be Push pull configuration (TYPE-P1/TYPE-P2) : Movement of units achieved by pushing or pulling chrome plated 'C' Handle fitted onto 1.6 mm thick plate (mounted on each double & single movable units) & rigidly fixed at suitable height on body side . Each movable undercarriage has 4 nos. of antifriction ball bearings for rolling onto channels & 4 no. of antifriction ball bearings for guiding between channels & 'J' section.

Fittings shall be centralized locking arrangement through locking stiffener mounted onto back of single last unit so that it gets locked on channels when all the units are brought together . The Recess handle lock is of Godrej make & placed at suitable height . This arrangement occupies a space of 90.0 mm . When the last unit is twin movable , hinged doors are provided for the end bodies, so in this case locking stiffener is mounted onto drive unit cover ; and with tile fascia option , it will be mounted in the recess of vertical trim . Each Drive Type units shall have Locking Knob near the drive wheel for manual locking of individual units when a person is using those units . Knob shall be rotated to unlock position when units are to be moved . End stoppers shall be provided to prevent derailment . Door locking shall be having hinged doors of recessed die cast handle cum lock giving 3 way locking through a lever & shooting bolts . Guide channels shall have 'J' section 2 mm thick HR & 25 mm Square bright bar . Easteners shall be galvanized/blackodized/Zn plated .The label holder shall be made from 2 mm thick clear transparent acrylic sheet . Also total no. of loading levels per understructure shall be 5 for SL1

TM1 - Twin Mobile 1 Bay Push Pull Type Overall Dimensions of TM1 - Twin Mobile 1 Bay Push Pull Type(U/C + Fittings + Handle)=915mm(W)x381mm(D) x 1980mm(H). Main Body shall have Rigid Knock Down Construction made of CRCA Steel and finish is epoxy polyester powder coated . Shelf is 0.8 mm CRCA Steel with UDL 80 Kg . Undercarriage construction is Welded frame made of HR sheet 3.15 mm thk. And finish is epoxy polyester powder coat 40 microns . Fittings , Door locking , Fasteners , Guide Holder , Label holder . Overall Dimensions of TM1 - Twin Mobile 1 Bay Push Pull Type(U/C + Fittings + Handle) shall be 915mm(W)x380mm(D)x1980mm(H).The Construction shall be rigid knock down made out of 0.8 thick CRCA steel conforming to IS : 513 . Each body shall have a main unit plus add on units (1,2,3,4,5) . Finish shall be Epoxy polyester powder coated thickness of 40 microns . Shelf construction shall be made from CRCA steel 0.8 mm thick IS :513 .Uniformly distributed load capacity of 80 Kg . Undercarriage shall have construction in welded frame made of HR sheet 3.15 mm thick conforming to IS : 10748 . Finish shall be epoxy polyester powder coat of approved color & shade with a dry film thickness of minimum 40 microns . The movements of the system shall be Push pull configuration (TYPE-P1/TYPE-P2) : Movement of units achieved by pushing or pulling chrome plated 'C' Handle fitted onto 1.6 mm thick plate (mounted on each double & single movable units) & rigidly fixed at suitable height on body side.

Each movable undercarriage has 4 nos. of antifriction ball bearings for rolling onto channels & 4 no. of antifriction ball bearings for guiding between channels & 'J' section . Fittings shall be centralized locking arrangement through locking stiffener mounted onto back of single last unit so that it gets locked on channels when all the units are brought together . The Recess handle lock is of Godrej make & placed at suitable height . This arrangement occupies a space of 90.0 mm . When the last unit is twin movable , hinged doors are provided for the end bodies, so in this case locking stiffener is mounted onto drive unit cover ; and with tile fascia option , it will be mounted in the recess of vertical trim . Each Drive Type units shall have Locking Knob near the drive wheel for manual locking of individual units when a person is using those units . Knob shall be rotated to unlock position when units are to be moved . End stoppers shall be provided to prevent derailment . Door locking shall be having hinged doors of recessed die cast handle cum lock giving 3 way locking through a lever & shooting bolts . Guide channels shall have 'J' section 2 mm thick HR & 25 mm Square bright bar . Easteners shall be galvanized/blackodized/Zn plated .The label holder shall be made from 2 mm thick clear transparent acrylic sheet . Also total no. of loading levels per understructure shall be 10 for TM1

Channel 3'0'' Overall Dimensions of Channel 3'0''=3 feet (L) Jsection of 2 mm thk . HR Sheet and 25 mm Square Bright bar - both connected by screws. Overall Dimensions of Channel 3'0'' shall be 3 feet (L) . Guide channels shall consist of 'J' section 2 mm thick & 25 mm square bright bar - both connected by screws . Prior to the embedding of the guide channels with the help of raul plug & screw , the ground has to be in proper leveled condition .

Channel 6'0'' Overall Dimensions of Channel 6'0''=6 feet (L) Jsection of 2 mm thk . HR Sheet and 25 mm Square Bright bar - both connected by screws. Overall Dimensions of Channel 6'0'' shall be 6 feet (L) . Guide channels shall consist of 'J' section 2 mm thick & 25 mm square bright bar - both connected by screws . Prior to the embedding of the guide channels with the help of raul plug & screw , the ground has to be in proper leveled condition .

Bidder Name

Amount

AK JAIN AND ASSOCAITES

H.K. Iron Industries

SHREE SANMATI CONSTRUCTION

M/S Jai Shree Creations

M/S R K TRADERS

BABA CONSTRUCTION

MODI CONSTRUCTION COMPANY

M/S Jai Shree Creations

AK JAIN AND ASSOCAITES

SHREE SANMATI CONSTRUCTION

M/S R K TRADERS

H.K. Iron Industries

BABA CONSTRUCTION

MODI CONSTRUCTION COMPANY

BABA CONSTRUCTION

SHREE SANMATI CONSTRUCTION

H.K. Iron Industries

AK JAIN AND ASSOCAITES

M/S R K TRADERS