SPL REPAIR REPLACEMENT OF CERTAIN WORKS AT GCSTE LAB AT AFSSR GURUGRAM, PROVN OF WORKS FOR SETTING UP OF OTES HALL AT AF STN SOHNA ROAD GURUGRAM, PROVN OF DEFICIENT AIR CONDITIONER FOR AFNET EXCHANGE AT AFSSR GURGAON AND PROVN OF WATER PIPELINE CONNE

Amount

Electrification Works Taking down carefully copper/aluminium point wiring (light, Fan, Socket or power) fitting such as switches, ceiling roses, pendents, regulators, sockets etc complete removing material to store for keeping in safe custody and making good disturbed surfaces of walls, floors etc all as specified as directed.

Taking unserviceable sub main wiring of any type/size including wires, conduits/battens etc complete all as specified and directed by Engr-in-Charge.

Taking down unserviceable MCB DB's/AC's box of any size/rating complete all as specified and directed by Engr-in-charge.

M&L for point wiring complete with stranded copper conductor 1.5 Sqmm size (Nominal area) PVC insulated unsheathed FRLSH Grade cable 1100 volts grade confirming to IS: 694 for phase and neutral drawn in and including heavy duty concealed PVC conduit confirming to ISI marked not less than 20mm dia including single core stranded copper conductor 1.5 Sqmm PVC insulated unsheathed FRLSH cable as earth wire to common earth and connected to earth dolly drawn in same concealed conduit complete all as specified for the following :-

One light point controlled by one switch 6/10 A with cables 1.5 Sqmm size all as specified and directed.

One 5 pin socket oulet 6/10 amps on same board including single core stranded copper conductor 1.5 sqmm PVC insulated and unsheathed FRLSH cable drawn in same conduit as earth wire to the common earth and connecting to earth dolly all as specified.

One 3 pin socket outlet, 6/10 Amps, on independent, board with cables 1.5 sqmm of size all as specified and directed.

M&L for point wiring complete with stranded copper conductor 4 Sqmm size (Nominal area) PVC insulated unsheathed FRLSH Grade cable 1100 volts grade confirming to IS: 694 drawn in and including heavy duty PVC concealed pipe confirming to ISI marked not less than 25mm dia including single core stranded copper conductor 2.5 mm Sqmm PVC insulated unsheathed FRLSH cable as earth wire to common earth and connected to earth dolly drawn in same concealed conduit complete all as specified for one 5 pin socket outlet two in one 16 Amps on an independent board. Note :- For item No 4 to 6 Rates are deemed to be included for cutting of chases for conduit and sunking for boxes cutting and making holes in wall/floor for passing in or through conduit.

All as per item No 5 above but with cable 2.5 Sqmm and earth continuity conductor of 1.5 sqmm stranded copper unsheatheed FRLSH complete all as specified and as directed.

S&F of white modular switch 1 module 6/10 Amp, 1 way confirming to IS 3854 with five part mechanism with double rocker system UV resistent ISI Mark cat Part No SLV 0100601 10 A of polycab make or equivalqnt model in legrand/ crabtree.

S&F of white modular switch 1 module 16 Amp 1 way confirming W IS 3854 with five part mechanism with double rocker system UV resistent ISI Mark cat Part No SLV 0101101-16 Amp of polycab make as equivalqnt in legrand/ crabtree.

S/F of white colour modular socket 6 Amp 2 Module made up of PBT shutter in glass filled nylone and terminal contact in brass meterial confirming to IS :1293 ISI mark and UV resistent cat part no SLV 0200201 6 A of polycab make or equivalent model in legrand/crabtree.

S/F switch modular 6 Amps-250 V AC, 1 way, 1 module Cat Part No 573400, Make : Legrand Arteor or equivallent Model in L&T/Crabtree.

S/F socket modular shuttered 6A-2/3 pin universal india 2 module, Cat Part No 573470, Make : Legrand or equivalent model in L&T/Crabtree

Information outlets- toollers (Data so act) RJ-45 Category 6- 4TP-2 Module Cat part No 573474 Make : Legrand or equivalent model in L&T/Crabtree

S/F of white colour modular socket 16 Amp 2 Module made up of PBT shutter in glass filled nylone and terminal contact in brass meterial confirming to IS :1293 ISI mark and UV resistent cat Part No SLV 0200501 16 A of polycab make or equile model in legrand/crabtree

S/F of modular cover plate inner and outer white in colour 12 M made up of polycarbonate with manufacturer logo emborsed on plate with base plate catpart no SLV 0901201-12 M make polycab or equivalent model in legrand / crabtree

S/F of modular cover plate inner and outer white in colour 3 M made up of polycarbonate with manufacturer logo emborsed on plate with base plate catpart no SLV 0900301-3 M make polycab or equivalent model in legrand / crabtree

S&F of concealed metal box 12 M made up of GI matarial with manufacturer logo emborsed on box, corroson resistant with earthing terminals with thickness not less then 1.2 MM catpart no SMB 0100079 of polycab make or equivalent model in legrand / crabtree

S&F of concealed metal box 3 M made up of GI matarial with manufacturer logo emborsed on box, corroson resistant with earthing terminals with thickness not less then 1.2 MM catpart no SMB 0100074 of polycab make or equivalent model in legrand / crabtree

S/F of neon indicator 230 volt 1 M white plate catpart no SLV 0300501 make polycab or equivalent model in legrand / crabtree

S/F blank plate 1M white colour catpart no SLV 0800101 make polycab or equivalent model in legrand / crabtree

S/F of recess mounted led light 600 X 600 MM for Modular /POP ceiling 36W with system luminous efficiency not less than 10 Lumen/Watt with homogenious diffuser for low glare application made up of CRCA material dully powder coated complete with LED module and LED driver catpart no PCGLLL3657 make polycab or equivalent model in legrand / crabtree

S/F in replacement of 20 Watt (Four Feet Long) LED batten made up of extruded thermo plastic with PC diffuser square in shape with CRI > 80, diffuser angle 120 degree, colour temp. 6500K catpart no LDO-0103076 make polycab or equivalent model in legrand / crabtree

Supply and fix ceiling roses, 3 phase, PVC/Plycarbonate, isolated body all as specified and directed at site.

Supply and fixing vertical type load line distribution board, double door, 8 way AC, 3 Phase 415 Volts, TPN bus bar 200 Amps rating and earth bus and din rail including 01 No. MCCB 3 Pole 415 Volts, 50 Hz, 125 Amps 10 KA breaking capacity as incomer complete.

Supply and fix replacement of MCB single pole and neutral 40/63 Amps 230 Volts 'B' Series complete all as specified and as directed at site.

Supply and fix MCB single pole 5-30 Amps 230 volts 'B' Series complete all as specified and as directed at site.

S&F sheet metal enclosure single pole and neutral with a two pin and earth plug and socket complete with one single pole MCB SP 20 Amps complete all as specified and as directed catpart no GPDPS 10006 make polycab or equivalent model in legrand / crabtree

Supply and fixing earth continuity copper strip of size 25x3 mm for main earthing lead fixed to wall on ceramic seperator or reces or burried in ground or drawn in conduit or any other indicated situation for Loop earthing etc. as required including taking down old u/s earth continuity conductor complete all as specified as directed.

Supply, laying and testing in replacement of cable XLPE insulated screened, PVC bedded galvanized steel strip or wire armoured electric power cable (heavy duty) with aluminium conductor 1100 Volts grade cross sectional area 3.5 core x 50 Sq mm. complete all as specified and as directed. Note : Provision of suitable double crimpped lugs and glands deemed to be included in quoted rates.

ditto- as per Item No 28 but 4 core 25 sqmm

Supply and Laying cable XLPE insulated, Screened, PVC bedded galvanised steel strip or wire armoured electric power cables (Heavy Duty) with aluminium conductor 11000 Volts (Earthed) Grade cross sectional area 95 sqmm 3 core

Cable jointing kit 11 KV (Earthed) grade cable for outdoor end tormination heat shrinke type with jointing material suitable for 3 core XLPE armoured cable 50 sqmm to 95 sqmm

Supply, laying and testing in replacement of cable XLPE insulated screened, PVC bedded galvanized steel strip or wire armoured electric power cable (heavy duty) with aluminium conductor 1100 Volts grade cross sectional area 3.5 core x 150 Sqmm. complete all as directed. Note : Provision of suitable double crimpped lugs and glands shall deemed to be included in quoted rates.

Supply, installing, testing and commissioning factory made and tested LT panel Outdoor type, platform mounted, suitable for 415 Volts 3 Phase and neutral, 4 wire, 50Hz AC supply system having bus bar chamber with insulated electrolytic Aluminium bus bars TPN of capacity 200 Amps rating installed on DMC insulators with bus bar chamber. The panel shall be dust and vermin proof, and made out of 3.15 mm thick CRCA mild steel sheet and mild steel & Angle iron frame work made out of 50 mm x 50 mm X 6 mm ), front opening type with aprons for cable entry, with proper ferrule & cable gland, internal wiring with PVC insulated multistranded copper conductor FRLS cable of adequate size but not less than 1.5 sqmm complete. All steel metal works including frame shall be with anticorrosive coating with seven tank process and finally epoxy polyester powder coating of Siemens grey RAL- 7035 shade. The scope of work also comprising of the following :- Make of Panel: Adlec/ Schneider / Universal Switch Gear Control/ Tricolite.

Supply, installing, testing and commissioning factory made and tested LT panel Outdoor type, platform mounted, suitable for 415 Volts 3 Phase and neutral, 4 wire, 50Hz AC supply system having bus bar chamber with insulated electrolytic Aluminium bus bars TPN of capacity 150 Amps rating installed on DMC insulators with bus bar chamber. The panel shall be dust and vermin proof, and made out of 3.15 mm thick CRCA mild steel sheet and mild steel & Angle iron frame work made out of 50 mm x 50 mm X 6 mm ), front opening type with aprons for cable entry, with proper ferrule & cable gland, internal wiring with PVC insulated multistranded copper conductor FRLS cable of adequate size but not less than 1.5 sqmm complete. All steel metal works including frame shall be with anticorrosive coating with seven tank process and finally epoxy polyester powder coating of Siemens grey RAL- 7035 shade. The scope of work also comprising of the following :- Make of Panel: Adlec/ Schneider / Universal Switch Gear Control/ Tricolite.

Supply, installing, testing and commissioning factory made and tested LT panel Outdoor type, platform mounted, suitable for 415 Volts 3 Phase and neutral, 4 wire, 50Hz AC supply system having bus bar chamber with insulated electrolytic Aluminium bus bars TPN of capacity 300 Amps rating installed on DMC insulators with bus bar chamber. The panel shall be dust and vermin proof, and made out of 3.15 mm thick CRCA mild steel sheet and mild steel & Angle iron frame work made out of 50 mm x 50 mm X 6 mm ), front opening type with aprons for cable entry, with proper ferrule & cable gland, internal wiring with PVC insulated multistranded copper conductor FRLS cable of adequate size but not less than 1.5 sqmm complete. All steel metal works including frame shall be with anticorrosive coating with seven tank process and finally epoxy polyester powder coating of Siemens grey RAL- 7035 shade. The scope of work also comprising of the following:- Make of Panel: Adlec/ Schneider / Universal Switch Gear Control/ Tricolite.

Note for Items No 33, 34 & 35 The panel manufacturer should have following Govt. Approved Certificates: 1. CPRI Certification Degree of Protection IP-54 (should have IEC:60439-1 test) 2. CPRI Short Circuit withstand strenght should be 50kArms for 1.0 Sec with intial peak of 105kA 3. CPRI Certification Rated current for short circuit not less than 4000 A with rated insulation voltage 660V 4. ISO 9001 CERTIFIED

M&L for earthing complete with galvanized steel earth plate eletrode 600 x 600 x 6mm thick burried directly in ground not less than 2.25mm deep below normal ground level (with the top edge of the plate not less than 1.50m below the normal ground level) connected to GI eath wire 4 mm by means of GI bolts, nuts, check nuts and washers of GI all as shown in electrical plate No 3 of SSR Part-I connected to earthing test point with aand including necesary excavation and earth work in any strata PCC pit 1:3:6 type C-1, 20mm bore medium grade GI pipe for ewatering 15mm bore light grade pipe for GI wire protection and funnel including 40mm thick RCC slab cover and testing on completion all as specified and as directed.

M & L for Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6.0mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of the plate not less than 1.5 metre below normal ground level, connected to and including using galvanised iron strip 32×6mm as earthing strip by means of bolts, nuts, check nuts and washers of galvanized iron or steel, earth plate surrounded by packed layer of char coal dust and common salt, 15cm thick all around bottom and top and watering pipe 20mm bore of GI light grade with funnel, wire mesh and 40 mm dia GI protection pipe medium grade all as shown in electrical plate No 3 of SSR Part-I and connected to earthing test point, main switch board and testing on completion including excavation, earth work concrete pit with 80mm thick RCC cover in RCC 1:2:4 type B-1 duly reinforced with MS bars 8mm dia @ 150C/C both ways and pit chamber in PCC 1:2:4 type B-1 with 2 Nos suitable lifting handles of 12mm MS bar complete all as specified.

M&Lfor Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to ples or any ther indicated situation for loop earthing etc. as required 4 mm dia glavanished iroon or steel wire complete all as specified and as directed.

S&F submain wiring with unsheathedmulti-stranded FRLSH Grade copper condductor cable 1100 volts grade drawn through in and including PVC rigid conduit medium grade of not less than 25mm dia with conduit accessories and concealed in wall/surface of ceiling for two runs of 6 Sqmm single core FRLSH Grade and one run of 2.5 Sqmm PVC insulated copper conductor for earth continuity wire between main DB to Sub Main DB complete all as specified and as directed. Note :- Two run of single core 6 Sqmm cable with one run of 2.5 Sqmm earth continuity conductor and PVC conduit and accessories will be measured as one length including cutting chasing in wall complete. Note 1 :- Rates are deemed to be included for chases of conduit and sunking for boxes cutting and making holes in wall/floor for passing in or through conduit.

S/F Submain wiring alongwith earth wire with the FRLSH PVC insulated copper conductor, single core cable in PVC conduit 2 x 4.0 sqmm + 1 x 1.5 sqmm earth wire Note :- 2 run of 4 Sqmm & 1 run of 1.5 Sqmm will be measured as single run

S/F Submain wiring alsongwith earth wire with the FRLSH PVC insulated copper conductor single core cable in existing GI raceway 2 x 2.5 sqmm + 1 x 1.5 sqmm earth wire Note :- 2 run of 2.5 Sqmm & 1 run of 1.5 Sqmm will be measured as single run

Supply and fixing Raceway -Metal/GI, height 25mm of size 225 mm x 25 mm , 3 compentment Cat Part No 689514 Make : Legrand or equivalent model in crabtree/ Polycab including culting of existing floor fitting in such a way that Raceway can be fixed complete all as specified & directed.

S/F bracket (GI) for fixing raceways on this floor Cat Part No 689720, 225 mm x 25 mm Make : Legrand or equivalent model in crabtree/ Polycab

S/F coupler for joining Raceways Cat Part No 689779 make : Legrand or equivalent model in crabtree/ Polycab

S/F DLP PVC trunking Cat Part No 010412 of size 80 mm x 50 mm Make : Legrand or equivalent model in crabtree/ Polycab

S/F Flexible cover fuel covers width 65 mm, Cat part No 010521 Make : Legrand or equivalent model in crabtree/ Polycab

S/F Pop up type flush mounting boxes for floor equipped with :Push and Slide" locking system to avoid accidental opening by feet to be equipped with Arteor socket outlets for installation use whe flush mounting boxes for concrete floors of 8 modules (2 x 4) cat Part No 054013, Matt aluminium finish Make : Legrand or equivalent model in crabtree/ Polycab

S/F Metal flush-mounting boxes, 8 module (2 x 4) Cat Part No 054003 Make : Legrand or equivalent model in crabtree/ Polycab

S/F DB SPN 8 way 1P-43, IK-09 with metal door, Nos of Module 12, Cat Part No 507612 Make : Legrand or equivalent model in crabtree/ Polycab

S/F MCB Double Pole 415 V B Curve, 40 Amps rating Cat Part No 408637 Make : Legrand or equivalent model in crabtree/ Polycab

S/F MCB Four Pole 415 V, B Curve, 100 Amp rating Cat Part No 408702 Make : Legrand or equivalent model in crabtree/ Polycab

S/F MCB SP 6-32 Amp 'B' Curve, 240/410 Cat Part No 408595 Make : Legrand or equivalent model in crabtree/ Polycab

S/F DB SPN 12 way IP 43, IK-09 with metal door, Nos of module 12, Cat Part No-507612 Make : Legrand or equivalent model in crabtree/ Polycab

S/F Metra Plug and socket DB's with one Nos SP MCB 20 A, 20A SP, 2P+E Cat Part No-507811 Make : Legrand (for AC) or equivalent model in crabtree/ Polycab

S/F Metal enclosure, 2 module, DP enclosure Cat Part No-507791 Make Legrand (for L-2 switch) or equivalent model in crabtree/ Polycab

M/L for making suitable Stand/Bracket Made out of MS channel 50 x 50 x 6 mm suitable for mounting of L-2 switch rack on wall including welding work, suitable fastners all as spfd and directed.

S/F wall Fan Bullet 2000, 300 mm sweep (12") Power input 75 watt, Speed 2000 RPM, Air Delivery 65 (CMM) white-Grey in colour make : Legrand or equivalent model in crabtree/ Polycab

S/F Regid non metallic conduit inclusive of wall tees, Bends, elboews, Reducers, bell mouth, tube ends fixing accessories such as couplers, lock nut, saddlers, pipe hooks etc.

Excavation in trenches n exc 1.5 wide and n exc 1.5 m in depth for foundation etc or for laying cable etc n exc 10 Sqm on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed.

Returning filling in including spreading, leveling, watering and well ramming in layers exc 25 cm thick complete all as specified and as directed.

Removal of excavated material/surplus soil to a distance n exc 50m and depositing where directed at a level n exc 50m above the starting point complete all as specified and as directed.

Supply and filling river sand in trenches including spreading for cushioning of LT UG cable complete all as specified and as dirceted. Note : Punned down thickness shall be measured and paid .

M&L for sub class ‘B’ bricks old size laid flat dry in trenches over cable, across the direction of cable complete all as specified & directed .

Supply and laying un-reinforced precast concrete cable cover, class HVP, type-1 with peak, size 300 mm x 180 mm x 40 mm

M&L for air break gang operated switch, tripple pole, machanicaly operated with contacts of feros bronze and moving contact of copper, vertically mounted, (12 insulated type) mounted on insulated and steel frame with operating mechanisim inculding down rod which can be operate worked from ground level for current rating upto 200 Amps 11 KV with locking mechanism, mild steel clamp, nuts, bolts, washers of reqd size including drop out fuse assembly (consists of 06 Nos drop out insulated with HT Fuse) with fuse carrier expulsion type including 2 coats aluminium paints over a coat of red oxide complete all as spfd including suitable MD Channel reqd for fixing at site.

M&L for Boring of holes under road, pavement, hard standing by trenchless technology using ultra sound technique and necessary machine including HDPE pipe of 150 mm dia suitable for 0.4 mpa working pressure complete all as directed.

Supply and lay in trenches /under roads/ crossing or fixed to wall/ pole, GI tubing light grade of size 40mm bore for protection of UG cables complete all as directed.

Ditto all as per item No 67 described here in before but 80 mm

M&L for disconnecting all HT/LT Connections of existing Transformer by taking proper shutdown from MES, Disconnecting of existing earthing from the Transformer, shifting of Transformer on existing plateform from middle to Left side as directed at site by Engr-in-charge and reconnecting all HT/LT side connection,Earthing and testing complete all as apfd & directed by Engr-in-Charge (Vendor may pl visit at site before quoting the rate).

Supply, installation, testing and commisioning transformer, step down, outdoor floor mounted, 11 KV/430 volts complying with 15 : 2026, copper wound, suitable for AC, three phase, 4 wire, 50 Hz system, capacity 100 KVA, oil immersed, naturally colled, delta connected on HT side and star connected on LT side, provided with manually operated top charger on LT side to vany secondary voltage + 7.5% in steps of 2.5 each with standard fittngs & accessories all as spfd in MES schedule Part ! and with cable end box at HT/LT side with neutral brought out complete with fill of Transformer oil maximum level, temp gauge brather filled with dilica gel, oil conservator tank with oil level indicater, explosion vent/safety relex valve, filling, drain, sampling and air releave valve, LT side cable box to be fitted with suitable size of cable gland, connecting with electrical system including bi-directional roler and name plate showing vecter gramp/tap changer system with volt variation all as spfd and firected by Engr-in-Charge.

Aircondition Work Supply and fixing of factory made epoxy polyster powder coated distriution board SP&N 12 way fabricated from minimum 1.6mm thick CRCA sheet with acrylic door (IP-42 protected) (fixed flush to wall and suitable for universal monuting and including 100 Amps copper bus bar, neutral bus bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with knockouts and suitable for one or DP MCB and as incomer and SP MCB's as outgoings complete as as specified and confirming to IS : 8623 (Make : Legrand or equivalent in crabtree/ Polycab). (Note : Civil works for flush mounting and making good to surfaces is deemed to be included in rates quoted.

S/F Air cooled split unit Air Conditioner Electric driven, single phase of capacity 1.5 TR, BEE 5 Star rated all as specified and directed

S/F volt stabilizer for automatic operator, single phase naturally air cooled indoor type and designed for input variatant between 170 V to 250 V + 2.5 % of capacity 4 KVAall as specified and directed

Water Supply Work S&F of gun metal gate valve (heavy duty) with iron wheel head screwed both ends for iron pipe of 25 mm dia bore complete all as specified and directed .

S&F of gun metal gate valve (heavy duty) with iron wheel head screwed both ends for iron pipe of 40 mm dia bore complete all as specified and directed.

S&F of GI Tubes of 25mm dia, 'medium grade', galvanised, with all fitting as required st site, laid in trenches complete all as specified and directed.

S&F of GI Tubes of 40mm dia, 'medium grade', galvanised, with all fitting required at site, laid in trenches complete all as specified and directed.

Supply, installation of Submersible pump, electric driven 415 V, Three Phase suitable for 100 mm dia bore well (Casing pipe size 100 mm) supply and Install complete upto 5 HP, 75 mtr head with not more than 65 mm outer dia of submersible pump inclusive of 3 metre long submersible cable acomplete all as specified and directed.

Supply and fixing of flat submersible 3 core 4 Sqmm cable PVC insualted, unsheathed multistranded copper conductor water proof suitable for submersible pump set complete all as specified and as directed.

M & L for Lifting and lowering submirsible pump moter with the help of machine/ hydra/chain pully block with sufficent manpower including making MS bracket to hold the coumn pipes at tope of cassing pipe of borewell and connecting the pipe line of submersible pump with motor of capacity up to 5 HP. Note :- During lifting/lowering of pump motor from borewell if falls in the borewell then contractor will arrange to take out the pump motor without any extra cost.

S & F GI Coloumn pipe of bore 40 mm and 6 meter length with socket/flange of size 40 mm dia and 5 mm thick duly screwed as well as welded on both ends , lowering and fixing into the borewell by using nuts, bolts, gasket and washers complete all as specified and diected by Eng-in-charge. Note:- Cost of welding of flange nuts,bolts & gasket is included in the unit rate.

Supply and fixing Direct-on-line (DOL) starter ML1.5 DOL type suitable for upto 5 HP to 7.5 HP summersible/monoblock pump motor set AC 440V 50 Hz with single phase priventor over current, short circuit protection complete with sheet metal enclosure including fixing/mounting as per L&T Cat No SS91854POAO complete all as directed and specified. Make L&T/ BCH/Siemens

M & L for PVC Flexible Hose pipe 25 mm dia heavy duty complete all as specified and directed

D P ENTERPRISES

akhil enterprises

Ridhi engineers and builders

M/s GANJOO AND CO

Singh Associates