Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹43.9 LAccepted-AOC | L1 | Accepted-AOC Accepted Being L1 | |
| 2 | L2₹44.3 L+₹34,390 (0.78%)Rejected-Finance ROWRIAH KB ROAD PO CHALIHA JORHAT 785004 ASSAM | JORHAT | JORHAT | ASSAM | 785004 | L2 | Rejected-Finance Rejected | |
| 3 | L3₹50.0 L+₹6.0 L (13.7%)Rejected-Finance | L3 | Rejected-Finance Rejected | |
| 4 | L4₹50.8 L+₹6.9 L (15.6%)Rejected-Finance | L4 | Rejected-Finance Rejected |
Tender Value
Refer Docs
EMD Value
₹96,000
Closing Date
26 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) JORHAT
GE (AF) JORHAT PIN-785005
REPAIR TO JOINT FILLING AND PME TO PART FLEXIBLE PORTION AND MISC REPAIR TO ALG MENCHUKA UNDER GE (AF) JORHAT
2023_MES_599398_1
8547/E8
Open Tender
Civil Works
Item Rate
180 days
GE (AF) JORHAT
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE (AF) JORHAT
₹96,000
Yes
30 Jun 2023
29 May 2023
28 Jun 2023
29 May 2023
26 Jun 2023
12 Jun 2023
Amount
M&L for applying PME (Polymer modified emulsion ) for flexible runway pavement from authorised manufacturer for medium consumption @ 0.91 to 1.5 litres per sqm in two coats (1st coat applied with 60% to 70% and 2nd coat with 40% to 30% of material. After each coat, surface to be kept clear for 4 to 6 hours). The work shall be carried out using mechanical spraying machine by skilled, qualified and authorised applicator for uniform application to maintain quality performance of finished surface. PME must have penetraion values of 10-20 mm and initial setting time of four to five hours but not more than eight hours post application complete all as specified and directed.
NOTES Application The work shall be carried out using mechanical spraying machine by skilled, qualified and authorised applicator. Certifcate for the same to be submitted by the contractor and prior approval obtained. Storage & Handling :- PME storage and handling temp shall be between to 10 to 50 degree and should be protected from freezing. Water to be used should be potable free from salts and chemicals. Cleaning surfaces:- Surface to be treated shall be dry, clean, dust & dirt free and durable. Surface of the runway shall be cleaned with wire/ coir brushes where the application is to be applied. The dust, mud or loose aggregate to be removed off the premises.
Preparation of PME:- Arrangment of mobile storage tank for running over runway with mechanical mixing arrangment with water and equal quantity of PME (1:1) for spraying and stirring well prior to application with compressor machine for uniform spray is to be made by contractor complete all as directed. Warranty:- Two years warranty of material performance and application performance to be obtained from the authorized manufacturer of PME by the contractor.
M&L for cleaning the existing cracks 5mm to 10mm wide and average 20mm deep as in bituminous surface of runway, by blowing all loose foreign particles with air compressor, removing rubbish outside MoD land and filling the cracks complete all as specified and directed.
M&L for Preparation existing old treated asphaltic surface by brushing with plastic wire brushes for removing all dust and durt and sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and applying one coat of runway marking paint (Aqua Base) golden yellow/orange/red for lines, arrows, letters, etc. width or girth exceeding 100 mm, complete all as specified and directed. Note : Painting of runway shall be as per users requirement viz once before mansoon and after mansoon or as per necessitated and directed
M&L for Preparation existing old treated asphaltic surface by brushing with plastic wire brushes for removing all dust and durt and sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and applying one coat of runway marking paint (Aqua Base) white for lines, arrows, letters, etc. width or girth exceeding 100 mm, complete all as specified and directed. Note : Painting of runway shall be as per users requirement viz once before mansoon and after mansoon or as per necessitated and directed
Cutting of grass, bushes, jungles etc mechanically and to be removed from site and deposited at low land area outside of MoD land complete all as specified and directed.
M/S DHAR AND DHAR
M/S PAUL CONSTRUCTION
PEE BEE INDIA
Bidder Name
AJOY DUTTA CHOWDHURY AND CO
PEE BEE INDIA
M/S DHAR AND DHAR
M/S PAUL CONSTRUCTION
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .