REPAIR TO JOINERY ROOF FLOORING CEILING PLASTERING SANITARY FITTING WATER TANK CLEANING AND ALLIED SERVICES AT FOD MD and OTM ACCN UNDER AGE BR I GE SOUTH UDHAMPUR

Amount

Cleaning and removing all scale and dirt, etc with chlorine or bleeching, from PVC water storage tank of any capacity exc 250 and n.exc 1000 ltrs without dismantling the tank and from mouths of circulating pipes, etc incl writting "Tank Cleaned on ____" indicating the date, month & year of cleaning on external wall of tanks with synthetic enamel paint and stainsils complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Dismantling of floor hearth or wall tiling including cement mortor bedding (but not backing ) and rubbish off the premises complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

Dismantling wall and ceiling boards, fibre pulp insulation etc) or insulation boards/ slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed.

Dismantling asbestos cement (corrugated, semi corrugated) etc sheets in roof covering including ridges complete all as specified and as directed.

Dismantling wrought iron or mild steel work in any description not otherwise specifically provided for complete all as specified and as directed.

15 mm thick rendering on concrete surfaces in CM 1:3 with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer's instructions and finished the surfaces even and fair without using extra cement complete both on floor and walls, complete all as specified and as directed. Note : Liquid WPC will be measured and paid separately.

Applying high performance two component flexible acrylic Polymer cementitious waterproofing coating by two coats of Bostik Boscolastic using 2kg/sqm in two coats after cleaning of surface and treating all surface cracks filled with Bostik Flowfill grout, all surface patchwork defects with high early strength Bostik Patchfix concrete, sealing bore packing joint with Bostik Flowfill Grout complete all as specified and as directed.

PCC 1:5:10 type E-2 as in Sunken floor /foundation filling and mass Concrete complete all as specified and as directed.

Joint free non skid ceramic colour tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm in floors set and jointed in neat cement slurry and pointed in coloured cement to match over 15mm thick screed bed in CM 1:4 complete all as specified and as directed by Engr-in-charge/GE.

Glazed ceramic coloured tiles 600 x 300 x 10 mm thick, digital pattern with dark, light and highlighter combination as in vertical portion such as skirting / dados set and jointed in neat cement slurry and pinted in white or coloured cement to match over 10 mm back coat in CM 1:3 complete all as specified and as directed.

Vitrified Ceramic double charged coloured tiles light shade 10 mm thick (square/rectangular) polished, area of each tile n exc 0.36 sqm as in floors, set and jointed in neat cement slurry and pointed in coloured cement to match the surface over 15mm thick screed bed in CM 1:4 complete all as specified and as directed.

Vitrified Ceramic double charged coloured tiles light shade 10 mm thick (square/rectangular) polished, area of each tile n. exc 0.36 sqm as skirting/dado, set and jointed in neat cement slurry and pointed in coloured cement to match the surface over 10mm thick back coat in CM 1:3 complete all as specified and as directed.

Machine cut kota stone slab flooring 18-20 mm thick over 20 mm thick cement screed bed in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

150mm wide strip of makrana white marble 20 mm thick machine cut, over 15mm thick screed bed, bedded jointed and pointed with grey cement slurry including cutting and polishing types complete all as specified and as directed.

Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness laid bedded and pointed in any mortar as in kitchen platform, floors, aprons complete all as specified and as directed.

Granite slab 20 mm thick as in pillars, window cill, cooking platform and the like in cement motar 1:4 including painting in white cment 1:2 using marble dust with a mixture of pigment to match the shade of granite including cutting polishing and moulding on edges complete all as specified and as directed.

20 mm thick granite (of any type) tiles machine cut in skirting/ dado/ walling laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over 10mm thick back coat in CM 1:3 complete all as specified and as directed.

Rounding to edges of stone slabs one edge, such as in steps , cooking platform, and other similar situations complete all as specified and as directed.

Suspended false ceiling using E-grid 2430, 180 GSM (exposed ceiling suspension system) of grid size 600mmx600mm with main runner 38 mm x 24 mm and wall angle 24mm x 24mm using 4mm thick high Pressure Non Asbestos Fiber Cement decorative Board (E-Board Classic) in a grid of GI systtem duly suspended with 4 mm dia GI bar hanger fixed with steel dash fasteners or iron purline from the roof with adjustment clip providing positions for light fixtures, air conditioning diffuser and ducts, sprinkler, smoke detectors etc. The main runners to be secured to structural soffits by hanger @ 1220 mm maximum c/c. The last hanger at the end of each main runner should not be interlocked between main runners @ 610mm c/c, as to form 600 mm x 600 mm grid complete all as specified and as directed.

Providing and fixing Gl frame work for seamless ceiling comprising of GI perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and as directed.

10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat/ curved surface over GI frame work and reinforced with G.I. wire mesh (Fillets, metal frame work and G.I. wire mesh paid separately) complete all as specified and as directed. Note : Design of POP ceiling will be as approved by GE

Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples as in windows and POP ceiling work complete all as specified and as directed.

Preparation of new seamless ceiling surfaces and applying two coats of oil bound distemper white or tinted with roller application over a coat of chalk whitening primer over 3mm thick wall care putty complete all as specified and as directed by Engr-in-charge or Garrison Engineer.

Pre painted galvalume aluminium zinc coating GI based corrugated sheets 0.5 mm thick of any colour having tensile strenght of 550/MPA as in roof covering, cladding to wall fixed with self taping screws complete all as specified and as directed.

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Fe 410 W (Gde E 250 Quality A) Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and as directed.

Welded steel wire fabric mesh weight n.exc 4 Kgs per sqm fixed to steel members complete all as specified and as directed.

Taking down cement plaster from brick/concrete surfaces including raking out joints, hacking for key and scrubbing down with water etc complete all as specified and as directed.

Rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer's instructions and finished the surfaces even and fair without using extra cement complete all as specified and as directed. Note : Liquid WPC will be measured and paid separately.

10mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces including finishing even and smooth without using extra cement complete all as specified and as directed by Engr-in-charge/GE.

Rendering 5 mm thick on brick or concrete surface as in ceiling in cement mortar 1:3 finished even and smooth without using extra cement complete all as specified and as directed.

Supply only water proofing compound (liquid),ISI marked complete all as specified and as directed.

Preparation of new plastered surfaces of wall and applying two coats of cement based paint including over a coat of chalk whiting primer complete all as specified and as directed.

Preparation of new plastered wall surfaces and applying two coats of oil bound distemper white or tinted with roller application over a coat of chalk whitening primer over 3mm thick wall care putty complete all as specified and as directed by Engr-in-charge/GE.

Preparation new surfaces plastered or unplastered and applying three coats of white wash on ceiling complete all as specified and as directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.,complete all as specified and as directed.

Brushing neat cement slurry with 3.0kg of cement per sq. metre,complete all as specified and as directed.

Providing, cement concrete type B0 1:2:4 (12.5 mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges, complete all as specified and as directed.

Rendering 5 mm thick on fair faces of concrete surface in CM 1:3 finished even and smooth without using extra cementmixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer's instructions and finished the surfaces even and fair without using extra cement complete all as specified and as directed. Note: Liquid WPC will be measured and paid separately.

Cleaning the entire roof surface thoroughly to remove all loose particles, dust/dirt particles and applying with One coat of industrial bitumen 85/25 grade at the rate of 1.20 Kg/Sqm over the plastered surfaces of roof all as specified and as directed by the Engineer-in-Charge/GE.

3mm thick APP based polymeric membrane minimum weighing 3 kg/sqm non-woven polyester reinforcement polymeric water proofing membrane (wt not less than 150 gms/sqm) laid on primed surfaces by gas flame torch application and apply one coat of industrial bitumen 85/25 grade at the rate of 1.20 Kg/Sqm over APP Memberence complete all as specified and as directed by the Engineer-in-Charge/GE. Note :- Water proofing treatment will be done by IWL or through a specialized agency which will further have to give a five years warranty for rectification of any defect if incurred at a later stage, otherwise no payment shall be made to the contractor if water proofing treatment is executed by engaging local labour.

Applying a coat of bituminous aluminium paint @0.10kg/Sqm as weather proof coat all as specified and as directed by the Engineer-in-Charge/GE.

Demolition of brickwork or stone/ boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework complete all as specified and as directed by Engr-in-charge/GE.

Brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6., complete all as specified and as directed.

Old size brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and as directed by Engr-in-charge/GE.

S&F in repairs plain, Aluminium sheeting 0.56 mm thick , Alloy 31000 H4 in ridges, hips, valley gutter, drip ,construction joints and straight flashing (length and girth as fixed),complete all as specified and as directed.

Rotational molded (three layered as per IS 12701) polyethylene water storage storage tank (cylindrical vertical with closed threaded top) hoisted and fixed in position including connecting inlet/outlet pipe connecting with necessary fittings all as required at site and specified in SSR part -I of capacity 2000 litres and dismantling of old UNSV water tank of same capacity all as specified and directed by Engr-in-Charge/GE.

Rotational molded (three layered as per IS 12701) polyethylene water storage storage tank (cylindrical vertical with closed threaded top) hoisted and fixed in position including connecting inlet/outlet pipe connecting with necessary fittings all as required at site and specified in SSR part-I of capacity 1000 litres and dismantling of old UNSV water tank of same capacity all as specified and directed by Engr-in-Charge/GE.

All as per item No 51 above but 500 ltr capacity water storage tank,complete all as specified and as directed.

Supply and fixing "as in repair" ball valves of size 20mm bore dia high pressure of PTMT (Make-Prayag) with epoxy coated aluminium rod and high density plastic ball (Minimum weight not less than 210 gms) screwed for iron pipe and fixed including necessary fitting as reqd at site complete all as specified and directed by Engr-in-Charge/GE.

Supply and fixing "as in repair" ball valves of size 15mm bore dia high pressure of PTMT (Make-Prayag) with epoxy coated aluminium rod and high density plastic ball (Minimum weight not less than 210 gms) screwed for iron pipe and fixed including necessary fitting as reqd at site, complete all as specified and as directed.

Supply and fix in repairs Bib tap 15 mm bore, brass, chromium plated, fancy type with crutch or butterfly handle conforming to IS screwed down, screwed for iron pipes or for brass ferrule complete all as specified and as directed.

S&F in repairs bib Tap of PTMT (Make-Prayag or equivalent) any colour 15mm dia complete all as specified and directed.

Supply and fixing "as in repair" stop valves/angle valve of 15 mm bore, but fancy type, chromium plated screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions including necessary fitting as required at site complete all as specified and directed by Engr-in-Charge. Make : Jaquar cat No LYR-38053/Cera/Prayag/KOHLER / MARC /HR Johnson /Parryware

S&F as in repairs fancy type single lever basin mixer Pillar tap, cast copper alloy, with capstan heads, chromiuk plated, screwed down high pressure with or without lettered "HOT" or "COLD" with long screwed shanks and fly nuts, screwed for iron pipe of bore 15mm complete all as specified and directed Make : Jaquar Cat No ARI-39001B/Cera/Prayag/KOHLER / MARC /HR Johnson /Parryware

S&F in repairs CP Soap dish complete all as specified and as directed.

Shower roses 15 mm chromium plated with or without swivel joints, any size, including 125 mm long arm and fixing to steel pipe or union, complete all as specified and as directed.

CP health faucet with 8mm dia 1.00m long flexible tube and wall hook with all accessories all as aproved, complete all as specified and as directed.

S&F in repair Waste coupling of PTMT for 32mm dia discharge pipe (half or full threaded) (Minimum weight 32mm 45gms/ 40mm-60 gms) complete all as specified and as directed.

Taking up or down steel tubing 15mm bore with connections for cleaning for refixing or removing to store yard complete all as specified and as directed.

All as per item No 63 above but 20mm bore,complete all as specified and as directed.

Galvanised steel water tubing medium grade (ISI Marked) 15mm dia with all fittings and fixed complete to walls and or laid under floors etc complete all as specified and as directed.

All as per item No 65 above but 20mm dia,complete all as specified and as directed.

Refixing old steel water tubing medium grade 15mm bore galvanised and connections in new or old position (walls, ceiling, floor etc.) complete all as specified and as directed.

All as per item No 67 above but 20mm bore,complete all as specified and as directed.

S&F in repair PVC connection 15mm bore with ptmt nuts of length 450mm, complete all as specified and as directed.

S&F in repairs viterious china urinals half stall white incl CP urinal Spray Nozzal complete incl providing and fixing of plug bedding urinal against wall in cement motor 1:2 securing urinal to plug with and incl 60mm long brass screws, pointing around urinal back in cement complete all as specified and directed,

Supply and fix in repairs vitreous china wash hand basin white flat back size 550x400mm excluding taps waste chain and plug and porcelain stopper but including brackets waste fitting brass chromium plated 32mm dia with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed etc complete all as specified and as directed by Engr-in-charge/GE.

S&F in repair water closet white vitreous china ware Orissa pattern of size 580x440mm with integral foot rest ‘P’ or ‘S’ trap 100mm dia front or back inlet incl provision of PCC bedding type B1, 1:2:4 ( 20 mm graded aggregate) and connection pipes ( excluding flushing cistern but including flushing pipe 32 mm dia MS chromium plated) (rate also include for taking off unhygienic of WC).

S&F in repairs vitreous China wash down water closet pan pedestal pattern, white (excluding fixing bolts, flushing cistern and flush pipe) with P or S trap but including plastic water closet seal, seat cover ,white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device including connection to drain and flush pipe complete all as specified and as directed.

10 ltr capacity PVC valveless, syphonic action type flushing cistern low level white with inlet, ball valve, float and handle including connetion to pipe but fixed in repair complete all as specified and directed.

S&F in repair CP tubular towel rail , 600mm long between flanges aluminium anodised, fixed with rawl plugs complete all as specified and directed.

S&F in repairs stainless steel peg set of six as per sample complete all as specified and as directed.

Dismantling cast iron pipe & reinforced concrete drain pipes, jointed in cement mortar of any dia taking out from trenches or fixed to wall upto 100mm complete all as specified and as directed.

100mm Cast iron soil sand cast pipes,waste and vent in any length withor without ears, with cement joints,laid in trenches or in floors complete all as specified and as directed.

75mm Cast iron soil sand cast pipes,waste and vent in any length withor without ears, with cemeent joints,laid in trenches or in floors complete all as specified and as directed.

100mm Cast iron soil sand cast pipes,waste and vent in any length with or without ears, with cemeent joints, fixed to walll complete all as specified and as directed.

75mm Cast iron soil sand cast pipes,waste and vent in any length withor without ears, with cemeent joints,fixed to wall complete all as specified and as directed.

50mm Cast iron soil sand cast pipes,waste and vent in any length withor without ears, with cemeent joints,fixed to wall complete all as specified and as directed.

Salt glazed stone ware gully traps square or round mouthed, type P of size 150x150mm set and jointed to drain pipe with cement mortar (1:1) including demolition of old unserviceable gully traps complete all as specified and as directed.

Cast iron bends (any radius diminishing pieces or tapes (larger bore measured), 75mm bore fitted with oval access door fixed with rubber ring joints as in repairs complete all as specified and as directed.

Cast iron bends (any radius diminishing pieces or tapes (larger bore measured), 100mm bore fitted with oval access door fixed with rubber rings joints as in repairs complete all as specified and as directed.

75mm Cast iron floor traps with grating including jointing to waste pipe fixed cncrete type B1 (1:2:4). complete all as specified and as directed.

Cast iron branch pieces, single/double (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches 100 bore, fitted with oval access door as in repairs complete all as specified and as directed.

Cast iron branch pieces, double (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches 75mm bore, fitted with oval access door as in repairs complete all as specified and as directed.

50mm Cast iron cowls, complete all as specified and as directed.

Cast iron Reducer 100mm for connecting and fixing gas pipe on walls as in repairs complete all as specified and as directed.

Cast iron Reducer 75 mm for connecting and fixing gas pipe on walls as in repairs complete all as specified and as directed.

Taking down eaves gutters and and rain water pipes (any size or pattern ), including all fittings incl removal of store and sold to contractor through credit, complete all as specified and as directed.

110 mm bore PVC SWR bends and fixed with joint sealent etc complete all specified and as Directed

110mm PVC (SWR) pipes single/Double socketed of any length with rubber ring joints pressure rating 4 kg/cm2 fixed to wall incl clamp etc complete all as specifiedand as directed.

Grouting 25 mm thick for damaged columns beams chajjas parapets etc. including any temporary shuttering to edges with cement mortar 1:2,complete all as specified and as directed.

Welded steel wire fabric mesh weight n.exc 4 Kgs per sqm fixed to steel members complete all as specified and directed.

Supply and fix in repairs stainless steel grating doom 100mm dia complete all as specified and as directed by Engr-in-charge/GE.

Taking down chowkats or frames of any description with shutters (without taking off shutters from the frames) area exceeding 1.5 Sqm but n exc 4 sqm each all as specified and as directed and making good the disturbed plastered surfaces with 10 mm plaster in CM 1:6 and final finish as per existing.

Taking down chowkats or frames of any description with shutters (without taking off shutters from the frames) area n exc 1.5 Sqm each all as specified and as directed and making good the disturbed plastered surfaces with 10 mm plaster in CM 1:6 and final finish as per existing.

Taking down shutters of any description exc 1 Sqm but n exc 2 Sqm each complete all as specifed and directed.

All as per item 101 above but n exc 1 Sqm each complete all as specifed and directed.

Refixing of shutter of any description exc 1 sqm and n exc 2 sqm in same opening complete all as specified and as directed.

Refixing of shutter of any description n exc 1 sqm in same opening complete all as specified and as directed.

2nd class hardwood plain solid straight chowkats and frames wrought framed rebates on the solid, rounded or chamfered put together with glue pinned at joints supplied and fixed, complete all as specified and as directed.

Solid PVC door frame of size 50mm x47mm made out of 5mm plain clour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing, complete all as specified and as directed.

Factory made solid panel PVC Moulded door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. Clause No. 8.B.1 to 8.B.10 and drawing on page No. 156 & 157 of MES SSR-2010 Part-II complete all as specified and as directed.

Pressed steel frames (Factory made) made out of 1.25 mm thick black MS sheet for doors, with one or more rebates including necessary fixing lugs, Butt hinges, lock strike plate, etc complete, size of frame 105x60mm incl bottom of each chowkat complete all as specified and as directed.

Pressed steel frames (Factory made) made out of 1.25 mm thick black MS sheet for doors, with one or more rebates including necessary fixing lugs, Butt hinges, lock strike plate, etc complete, size of frame 125x60mm incl bottom of each chowkat complete all as specified and as directed..

35mm thick 2nd class hardwood factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces , size of rail and stile as per IS:1003 (Part-I), Klin seasoned and chemically pressure treated all as per SSR complete all as specified and as directed.

35mm thick second class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats

Flush shutter, 35 mm thick, solid core construction with block board core, and ply wood face panels but one face is covered with decorative laminate face veneer with lipping complete all as specified and as directed.

Steel window (box type) with gauzed shutter factory made with side hung shutters including pintol hinges, steel handles, steel peg stay and all locking arrangement complete with glazing bars dovetailed or welded including one shop coat of red oxide primer complete all as specified and as directed. Note : (i) The window shall be fabricated as per Drg No CEUZ/TD/1551/15 Sheet 1/3 to 3/3 (ii) MS fillets, glazing, wire gauge, Glass shall be measured and paid separately.

Description all as per Srl Item No 114 here in before but without glazing bar complete all as specified and as directed. Note : (i) The window shall be fabricated as per Drg No CEUZ/TD/1551/15 Sheet 1/3 to 3/3 (ii) MS fillets, glazing, wire gauge shall be measured and paid separately.

Factory made mild steel ventilators box type with upper top hung with glazed and gaused shutters and bottom openable,locking arrangements type shutters including pintol hinges,steel peg stay and one shop coat of red oxide primer complete all as specified and as directed. Note : i) The window shall be fabricated as per Drg No CEUZ/TD/1302/2009 Sheet 1/3 to 3/3 ii) , Glazing, wire gauge and Glass shall be measured and paid for separately.

Factory made mild steel ventilators box type with upper top hung with glazed and gauzed shutters and bottom openable type,locking arrangements shutters including pintol hinges,steel peg stay and one shop coat of red oxide primer complete all as specified and as directed.(without frame but frame to be made along with door) Note : i) The window shall be fabricated as per Drg No CEUZ/TD/1302/2009 Sheet 1/3 to 3/3 ii) , Glazing, wire gauge and Glass shall be measured and paid for separately.

Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; railing;frame work for water tanks,cup Board etc and similar work conforming to Fe 290 Gd E-165 complete all as specified.

Powder coated Anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle,Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge/GE.

S & F in repairs double action floor spring for aluminium doors hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed including necessary cutting and making good to floor as per existing complete all as specified and directed.

S&F in repair door closer hydraulically regulated, aluminium (extruded section) body, designation No.2, universal type, suitable for door shutters of 701 to 850mm in width and of weight between 36 to 60 kg etc complete all as specified and as directed.

PCC 1:3:6 type C1 (20mm graded aggregates) as in bed blocks for hold fasts including necessary form works, complete all as specified and as directed.

Plain cement concrete 1:2:4 type B0 using 12.5 mm graded stone aggregates as in filling of pressed steel door frame complete all as specified and as directed.

Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staplescomplete all as specified and as directed.

Supply and fix in repairs galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples

100mm size butt hinges, medium weight, cold rolled complete all as specified and as directed by Engr-in-charge/GE.

75mm size butt hinges, medium weight, cold rolled complete all as specified and as directed by Engr-in-charge/GE.

150mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed by Engr-in-charge/GE.

75mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed by Engr-in-charge/GE.

100mm powder coated aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed by Engr-in-charge/GE.

100 mm door handle, Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed by Engr-in-charge/GE.

75mm door handle, Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed by Engr-in-charge/GE.

300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed by Engr-in-charge/GE.

150 mm size (Overall length of cover plate) floor door stopper of aluminium body and tongue, anodised, with hard drawn steel spring complete all as specified and directed.

S & F in repairs Mortice lock, brass, vertical type, size 100 mm 4 levers with 02 Nos keys complete all as specified and as directed.

Small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type E-22 50mm long, articles n exc 200 Cu cm each of Ist class soft wood, complete all as specified and as directed.

300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

S&F in repairs drapery rod of 25mm dia stainless steel decorative along with brackets and end caps of quality as approved by GE.

Hacking out old boken glass(any thickness, size, quality or description) from wooden frames/steel frames glazed with oil putty or fixed with beads complete all as specified and as directed.

5.5 mm thick sheet glass ordinary quality and glazing with rubber beading exc 0.5 Sqm each pane complete all as specified and as directed.

4mm thick sheet glass, ordinary quality and glazing with rubber beading around the glass, in squares n exc 0.50 sqm in each pane complete all as specified and as directed.

4mm thick sheet glass, frosted or grounded on one side with rubber beading around the glass, in squares n exc 0.50 sqm, complete all as specified and as directed.

Preparation of new steel surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel painting complete all as specified and as directed by Engr-in-charge/GE.

Preparation of new steel surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel painting over a coat of red oxide primer complete all as specified and as directed by Engr-in-charge/GE.

One coat of synthetic enamel painting on old painted wooden surfaces of any description, not otherwise described over 10cm width or girth including preparation complete all as specified and as directed by Engr-in-charge/GE.

Preparation of new wooden surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel painting over a coat of pink primer complete all as specified and as directed by Engr-in-charge/GE.

Preparation of old steel surfaces of any description, not otherwise described over 10cm width or girth and applying one coats of synthetic enamel painting complete all as specified and as directed by Engr-in-charge/GE.

Preparation of old decorated wall surfaces by washing rubbing down and stopping of distempered surfaces and filling the nail holes by white cement and applying one coat of oil emulsion distemper white or tinted with roller application complete all as specified and as directed by Engr-in-charge/GE.

Preparation of old decorated surfaces of walls by by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent walls and trading oil and greasy spots and applying one coat of cement based paint white or tinted complete all as specified and as directed by Engr-in-charge/GE.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level),complete all as specified and as directed.

Plain cement concrete type E-2, 1:5:10 (Using 40mm graded stone aggregates) as in sub base complete all as specified and as directed by Engr-in-charge/GE.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and as directed.

Durastone heavy duty vitrified tiles 10 mm thick Sq/rectangular tiles area of each tile not esceeding 0.36 Sqm as in floors set and jointed in neat cement slurry and pointed in clooured cement to match the surface over 15mm thick screed bed in CM 1:4, complete all as specified and as directed..

PCC 1:3:6 type C1 (using 20 mm graded crushed stone aggregate) as in coping, edging concrete incl necessary formwork, weathering, slightly rounded or chamfered angles complete all as specified and as directed.

Greasing of all parts of steel rollings, gear operated or manual operated shutter, at any height, including guide channels and replacement of weared parts, springs, laths etc, crank handle, bearings, crank shaft etc suitable sizes including any welding required, complete all as specified and as directed. Note : Size of shutter shall be measured for greasing. Replacement of parts will measured seperately

Providing and fabricating mild steel 1. 0 mm thick black sheet as in top cover of rolling shutter fixed to wall in proper size ,shape & position suitable for rolling shutter complete all as specified and as directed.

S&F in repairs MS spring for rolling shutter size of spring 300mm long inner dia not less than 65 mm and MS wire 6mm as approved, complete all as specified and as directed.

All as per item No 157 but size of spring 450 mm long inner dia not less than 65mm and dia of MS wire 8 mm as approved by Engineer-charge/GE.

S&F in repairs MS pipe heavy duty of 40 mm dia as in shaft of rolling shutter complete all as approved.

lath section formed from cold rolled strip 1.25mm thick and width as required all as approved .

Guide channel 25mm width, depth of channel 65mm not less than 1.0mm thick as required, complete all as specified and as directed.

S&F in repairs 18/19 mm thick prelaminated particle board, exterior grade , prelaminated one side with decorative choice lamination and other side balancing white lamination , fixed with screws to timber frame, as in kitchen cabinets and cupboard shutters, built in cupboards work complete all as specified and as directed.

Hetich softcloser hinges of stainless steel premium quality complete all as specified and as directed.

100mm hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed.

Magnetic catches brass body and striking plate including letting in and fixed suitable for cupboard shutters complete all as specified and as directed.

75 mm decorative Brass handles, cast type, polished bright, complete all as specified and as directed.

s l sharma and sons (BID ID -3055960)

M/S PARDEEP KUMAR (BID ID -3069030)

PARDEEP SHARMA (BID ID -3068485)