Balance Work at Water Supply Scheme Khundi, Block Dhariwal Distt. Gurdaspur, (Under Head IA(II) NRDWP) (PKG-1)

Amount

MACHINERY

Providing & installing testing & commissioning of 1 no electrically driven Submersible Pump set capable of delivering 2.80 LPS against a head of 47 mtr along with electric panel board consisting of electrical appliances such as automatic Star Delta Push Button or oil impressed starter, Main Switch, VM, AMpere Meter, ELCB, Shunt capacitor. Single phase, preventer, Indicating lamps, Kit-Kat etc. including M.s column Pipe of IS 1239-2004 medium class size 65mm and Length 30 mtr.(in 3mtr lengths each with flanges, screwed and welded on both sides) rubber gaskets, nuts and bolts submersible cable of 80 Mtr. Length and 2.50mm2 size as per IS694-1990 reaffirmed 2000 complete in all respects

Rate of Motor with Pump

Panel Board

Submersible cable Size 2.50mm2

Column Pipe (G.I) 80mm i/d

BALANCE WORK OF PUMP CHAMBER SIZE 2.20X2.20M

RECESSED HGW CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES:

Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge welded conduit pipe 20mm/ 25mm dia (1.6mm thick) ISI Marked, recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), PVC Bush, Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), CI Circular junction Boxes (Four way 1½" deep for walls and 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):-

Wiring fan point (Without fan box)

Wiring light point

Wiring 6Amp. Plug control comprising wall socket point

GALVANIZED IRON PIPES AND G.I. EARTHING:

Supply & erection of G.I. pipe (A-Class) as per IS:1239 (Part-I) 2004 including sockets, bends, inspection boxes, Steel hooks, GI saddle clamps and other petty materials etc., where necessary including painting as per PWD General Specifications:-

Earthing with 7/12 S.W.G. (7/2.80mm dia.) G.I. rope in 20mm dia G.I. pipe with G.I. reducing socket 50mm x 20mm (upto 14 Metre in length)

Painting two or more coats excluding priming coast with ready mixed paint for metallic surfaces in all shades on steel or iron work (Special quality)

Distempering with Acrylic washable oil bound distemper (of approved manufacture) one coat over one priming coat on old distempered surface

Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats on old work when shade is changed .

Finishing walls with exterior decorative cement based paints as snowcem, Robbicem etc. on old work two or more coats to give an even shade.

Providing and fixing of ceiling fan of reputed make such as Crompton or equivalent

Providing and fixing Electric Tube Rod set of reputed quality such as Philips/Salvania Laxman or equivalent. Full size

Providing and fixing CFL with holder of reputed quality such as Philips/Salvania Laxman or equivalent. Full size

Supplying & fixing glass panes with glazing clips and special metal sash putty of approved make.

Glass panes 4mm or 10.75 kg / sqm exceeding 0.4 sqm area

BALANCE WORK OF OHSR SIZE 25000 LTR

Providing & fixing of Aluminum ladder inside tank

Providing and fixing of CI man hole cover and frame including locking arangement etc

Providing & Fixing Aviation Obstruction Light complete including wiring etc.

Providing& fixing Water Level Indicator (ELECTRONIC) Complete with wiring etc.

Supply of ANGLE IRON (50 MM * 50 MM * 6 MM)

Providing & Fixing Aluminium Lightening Conductor Complete Including wiring Earthing etc.

Supply of GI Pipe 25mm Dia B CLASS in two rows including fixing vertical supports and hand rail

Supply of MS Clamps Flat 80mm * 8mm

Supply of Nuts and Bolts for pipe and specials jointing

Testing of OHSR including chemical water proofing

DI DOUBLE FLANGED PIPE 80 mm dia FOR SCOUR

DI DOUBLE FLANGED PIPE 100 mm dia FOR INLET

DI DOUBLE FLANGED PIPE 100 mm dia FOR OUTLET

DI DOUBLE FLANGED PIPE 100 mm dia FOR OVERFLOW

CI DOUBLE FLANGED SV

100 MM I/d (No) ( premium quality)

80 MM I/d (No)

CI DOUBLE Expansion joint

100 MM I/d (No)

80 MM I/d (No)

CI DOUBLE FLANGED DUCK FOOT BENDS

100 MM I/d (No)

80 MM I/d (No)

DOUBLE FLANGED CI BELL MOUTH

100 MM I/d (No)

80 MM I/d (No)

DOUBLE FLANGED CI PUDDLE COLLARS

100 MM I/d (No)

Painting and finishing of CI/ DI pipes and special . Complete job as per colour codes specified in DWSS manual and directions

Construction of Plinth Protection of RCC OHSR of Size 25000ltr As per Standard Drawing and Analysis complete in all respects.

Construction of Brick Masonry over flow Haudi for OHSR Size 1.20m x 1.20 M Complete in all respects

C.I.FITTING INSIDE PUMP CHAMBER

Providing & Installing 100 mm dia delivery main (from Tube-well to duck foot bend including cost of C.I.D/F Pipes, D/F Sluice Valves, D/F Non Return Valve & Specials as C.I. Bends, Tail Piece Tees, Pressure gauge, Air Valve,,V notch haudi etc. inside the Pump chamber as per DWSS standard design and analysis complete in all respects. As per IS1536-2001 & 1538-1993 reaffirmed 1999 and electro steel Casting/Kesoram pipe make).

DISINFECTION UNIT

Providing Installing testing and commissioning and one no. electronically actuated, diaphragm operated, metering system, chemical dosing chlorinator, suitable for delivering 0.5 to 6 leter of bleaching powder solution/ sodium hypo solution per hrs under maximum deliver pressure upto 7kg/cm2 and suction left not less than 1.5 meter. (Milton roy or Equivalent make)

D.I RISING MAIN

Providing, stringing out, cutting, jointing & testing out ISI marked D.I K-9 pipe ( S&S) & Specials as per 8329 & laying the same in trenches to correct alignment and gradients, jointed with rubber titen joint fitted complete including all cartage & including cost of excavation complete in all respects as per DWSS Standard analysis.

100mm i/d (Mechanical)

Sluice Valve & Sluice Valve Chambers

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS1410) and Bronze(gunmetal) working parts sluice valves ISI marked 14846-2000 including jointing, testing & cost of Nut, Bolt & insertion sheet, all carriage complete (with the approval of Engineer in-charge).

Consturction of masonary Sluice valve chamber excluding Sluice valve cover as per standard design & drawings of pubic health department.

(a) Size 0.9 m. x 0.9 m.

DEVELOPMENT OF WATER WORKS SITE.

Providing & fixing 1.2mtr high fencing around the head works site with 1.65 meter post, placed every 2.5 meters apart, embedded in cement concrete blocks and every tenth post to be strutted with three rows of G.I. Barbed wire weighing 9.34 Kg per 100 meters (minimum) and fixing with GI staples tied to 6mm bar nib, with binding wire or by providing cut, including drilling holes in the post, including cost of posts, winding wire, strutted earth work in the post & aluminum painting complete in all respects as per DWSS standard Drawing and analysis.

Providing & fixing D-Hook complete with MS Bolts size 300mm x 18mm as per DWSS standard Drawing and analysis.

Painting of brick masonry corner pillar including cost of cement pointing including cost of material complete in all respects as per DWSS standard Drawing & Analysis.

Painting of masonry gate pillar including cost of MS Steel Gate size 1.22 m x 1.37 m as per DWSS standard Drawing and analysis.

Providing & fixing MS sign Board as per DWSS standard design and analysis.

DISTRIBUTION SYSTEM

Providing, laying, Fixing, jointing, cutting & testing of uPVC Pipes & Specials (6 kg./cm2) including cost of excavation complete in all respects as per ISI-4985 standard analysis. (Supreme /Finolex/Prince/Jain/ Kissan Make or equivalent make)

Excavation with JCB

uPVC Pipe 110 mm o/d

Testing of uPVC Pipes & Specials (6 kg./cm2) including cost of excavation complete in all respects as per standard analysis.

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS1410) and Bronze(gunmetal) working parts sluice valves ISI marked 14846-2000 including jointing, testing & cost of Nut, Bolt & insertion sheet, all carriage complete (with the approval of Engineer in-charge).

Consturction of masonary Sluice valve chamber excluding Sluice valve cover as per standard design & drawings of pubic health department.

(a) Size 0.6 m. x 0.6 m.

Repair of Pipe line to remove the leakage including bailing out of water with required jointing materials complete in all respects.

Making connection from existing pipe line including cost of bailing out water and al other materials compelte in all respect Up to 210mm

Dismantling of mettaled road & back filling with excavated earth fully compacted the restoration of the mettaled road to its original condition will be done by the concerned department i.e. PWD (B&R) PMB/Panchayati Raj) 63/90/110mm o/d

Household water connection ISI Marked,

Providing proposed water connection to house hold up to wall with providing, laying jointing, testing GI pipe lines 15mm i/d=2.50 mtr B- Class ( Above GL), Prov. & fixing MDPE pipe 15mm i/d with specials 2.00 Mtr (Below GL) including cost of specials such as tees, bends, sockets, elbow etc. cutting, threading, and testing in trenches in the ground and ISI marked 15mm i/d GM ferrule as per IS: 2692 and 3" i/d clamp with c.i bib cock 15mm i/d as per IS:210 with stainless steel spindle of approved make as per (including excavation)