Construction of South Gate Complex at JNPA

CIVIL WORKS

DISMENTALING

EXCAVATION AND FILLING

RCC Work

BRICK WORK

PLASTER & WATERPROOFING

EXTERIOR ELEVATION

MS FABRICATION

ADITIONAL REQUIRED PACKAGE- EXTERNAL CIVIL

EXTERNAL DRAINAGE SYSTEM

MANHOLE CHAMBERS

Constructing brick masonry man hole chambers for electrical & LV Services with bricks of class designation 75 in cement mortar 1:5 (1 cement : 5 coarse sand) with RCC top slab of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size), 200 mm thick foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside and outside plastering 12mm thick in cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement inside and rough plaster on outside and making channel in cement concrete 1:2:4 mix, (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering shuttering all complete.(1cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) neatly finished complete M.S s, complete as per standard design and approved drawings, including the cost of excavation, back filling, disposal of surplus earth foot rests and other associated civil works with S.F.R.C cover and frame (heavy duty, HD- 20 grade designation) conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg., fixed in cement

LANDSCAPE

INTERIOR WORKS

FLOORING AND TILING

Ppoviding & Fixing Laminated Wooden Flooring : Providing and fixing pergo original mort hand wearing laminate or equivalent flooring with excellent properties long life time original floor planks should be joined together all the groove etc. complete.

P&F Flooring 600 x 600 : Providing and fixing MATT FINISH ANTISKID tiles of minimum size 600 x 600 mm of about 10mm thick having water absorption less than 0.055 of approved make, shade and pattern for floor & dado in required position fixed on plaster of cement mortar 1:4 neat cement paste. including filing joints with neat white cement slurry curing cleaning etc. complete

Providing and laying Vitrified tiles having size 60 cm. x 60 cm / 60 cm to 120 cm. confirming to corresponding I.S. for dado in Toilets and required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry/ grouting cleaning curing etc. complete.

Providing and preparing kitchen Platform /Wash Basin Counter upto 75 cm width, made up from 30 mm thick and 75 cm high vertical support for kadppa at 1m.c/c of 25 mm thick both side polished kadappa middle shelf and bottom of 20 mm thick one side polished kadappa with facia patti of 20 x 50 mm kadappa including all material labour cutting fixing with cement mortar and araldite curing polished and cleaning etc. complete.

Providing double sills, jambs and frames of black/approved colour granite slabs 20 mm thick of approved quality, vein and colour with machine polished surface on a bed of cement mortar 1:4 including neat cement float, removing existing cills stacking the same and debris disposing off upto a distance of 50 metres, removing, refurbishing & refixing existing alu. grill, filling joints with cement slurry to match the colour of the slabs, curing polishing and rounding edges, cleaning etc. complete. (Basic rate Rs. 165/sft)

Providing and laying Rectified and vitrified mirror finish decorative type tiles for 100 mm High Skirting of approved make, shade and pattern for Skirting in required position laid on plaster of 1:4 cement mortar, cement paste, removing existing tiles stacking the same and debris disposing off upto a distance of 50 metres & filling joints with neat cement slurry, curing and cleaning, covering with POP or vinyl sheet etc.complete.)

PAINTING

Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete.

Providing and applying Antimicrobial pearl/ luster / Satin finish paint of approved colour and shade over punned / puuty finish etc. complete.

Providing and applying plastic emulsion paint of approved colour, shade and quality to old/new surfaces in two coates including scaffolding, preparing the surfaces etc. complete. (including primer coat).(Dulux, Asian or equivalent)

Providing and applying two coats of synthetic enamel paint for window grills and railing of approved colour to new /old structural steel work and wood work in buildings, including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete.

Providing and applying two coats Apex Ultima Puranature Anti-Pollution Or equivalent approved brand, paint should decomposes organic substances and inorganic gases(NOx, VOC‘s, CO, SOx,formaldehydes,etc.inpresence of natural or artificial light. It contains Graphene and nanoparticles of titanium oxide. and Absorbs CO2(4.8Kilogram/15l).plaster crack should be filled by Acrylic base Crack seal/ Textured Crack filler, Paint has to applied on one coat of Apex Ultima Puranature Anti Pollution Primeror Equivalent. Warranty Should be given by the Manufaturer The work should be done by the Manufacturer Recommended applicator and hes

DOORS AND WINDOWS

Providing and fixing in place Single leaf glass door for cabins of overall size of each leaf 900mm x 2450mm made out of 12 mm thk. tougfened glass. The door will be finished with necessary accessories like patch fitting pivot, floor spring, lock, handle etc. Rate to include cost of heavy duty floor spring ( capacity 120 kg), ss handle of size 450mm, ball bearing hinges, mortise concealed dead lock, door stopper and all required hardware complete as directed. (all fittings is Hafele or equivalent)

Providing & Fixing Door Shutters in Both side Laminate finish : with Complete Hardware at require location and having height more than 1:5 meter made by using solid core Mariane type flush door 35 mm thick of the requisite manufacuture viz.Anchor / Century / Kenwood / Duro or equivalent generally confirming to I.S.710 -termite treatment to plywood and wood work with ten years guarantee bond etc. Including all leads & lifts etc. Complete necessary lipping (BTC) mounding, hardware, locks handle’s etc.as per Architectrual drawing to be approved by Employer before entire scheme is finalsed and directed by engineer incharge.

Providing and fxing of uPVC Window Openable/ Sliding, Ventilator etc of all sizes, made out of Coated extruded section plain uPVC sections. The window frame made out of rigid uPVC sections meter cut at 4 corners & joint with plastic fusion welding with internal reinforce required. The shutter section made out of extruded rigid uPVC with internal reinforced with provision of 5mm glaze/wire mesh as per requirement. The window shall be fixed to the wall using 65x100mm long M.S. fasteners at suitable place provided for each vertical and horizontal member etc. complete as per manufacture’s specification and direction of Engineer-in-charge.

Providing & Fixing of Fire Door Single Leaf (1000-1200 mm x 2100 mm) with accessories, 2 Hr Fire Rating MS fire Door as per Design & Drawing or as per Direction by Engineer In Charge.

Supply & Installation of DORMA or Equivalent SG System100 Door 1500 - 2100 mm on provided door Frames & Glass Shutter of size 100mm x 30/45mm & Style 70mm x 45mm for door of size 1500 x 2100. It includes supply of 10mm Thick Toughened glass for Door. Hardware as below. FLUSH HINGE 127x78x3mm, SS304, SATIN FIN, Dorma Narrow Style Lever handle and Lock, TS70 OPEN Door Closer with Slide channel arm and hold open unit, Half Dome Door Stopper. as per Desing & Drawing or as per Direction by Engineer In Charge.

Providing & Fixing of Automatic Sliding Door Operator Non Fire Rated Operator Finish : Standard Alu.Sliver, Clear Opening : 1800mm (W) X 2100mm (Ht) 2 Moving Panels of 900mm each, Panel Weight Double Sliding = 2 x 100 Kgs, ES 200 Easy 4.15mtr Automatic operator Consist's of :‐ Operator Profile ‐ 1 nos Mechanical Component ‐ 1 nos Electrical Component ‐ 1 nos, Glass Clamping Rail 1050mm ‐ 2nos Floor Guide for Glass Door ‐ 2nos Five Position Program Switch with knob ‐ 1no Cable for Program Switch Nemo Motion + Nemo Dual ( Safety& Motion) Combo pack Soft nose Seal ‐ 2nos of 2200mm EM Lock ‐Fail Safe,12mm toughened clear crystal edge polished glass for 2 Moving panels ONLY as per Approved drawing and Design or Direction By Engineer In-Charge.

ROOFING AND CEILING

Providing and fixing in position Moisure Resistant Gypsum board ( MR Board of Saint Gobain or USG Make ) false ceiling with 12.5 mm thick Gypsum boards, screwed /fixed to the under structure of suspended G.I. Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25x50 mm maximum center to center distance of 600 milimetre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws. The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and inter mediate channels. Additional inter mediate channels should be fixed to straphangers for additional support to prevent strapping at every 1200milimetre item to be completed in all respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts etc. all complete.curved wedge of 51.5 mm and two flanges of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with the help of connecting clips and in direction perpendicular to the intermediate channel at 450 mm centers, 12.5 mm dry walls screws at 230 mm centers; fixing screws mechanically either with screw driver or drilling machine with suitable attachment etc. complete.

Providing and Fixing Mineral Fibre Acoustical Suspended Ceiling System with Dune(BevelledTegular) Edge Tiles of size15mm Exposed Grid.The tiles should have Humidity Resistance(RH) of99% ,NRC0.5, Light Reflectance 85% ,Thermal Conductivity k=0.052-0.057 w/m K, Colour White ,Fire Performance UK Class 0/ Class 1 (BS476pt-6&7) inmodule size of 600x600x16mm, with Recycled content of 35%. The tile shall be laid on precoated G.I.channel height 32 with 15mm wideT-section flanges colour white having rotary stitching and XL2CLI Ponall Tsectionsi .e.the Main Runner,1200mm and 600mm Cross Tees with a web height of 32 mm and a load carrying capacity of 7.57 Kilograms / M2 and pull out stength of minimum 100 Kilograms..The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system. The Tile and Grid system used together should carrya 10year warranty .approved as per GRIHA and BS476 etc.complete.

Providing and fixing false ceiling with eco-friendly light-weight calcium silicate tiles of spintone surface texture aerolite make or equivalent of size 595mm x 595mm having 15mm thick densified micro look edge and 100% humidity resistance incombustible as per BS 46part IV and thermal conductivity 0.043 w/m 0 KC and NRC 0.50 placed in true horizontal level suspended grid of size 600x600mm made from hot dipped G.I. steel sections ion silhouette profile, rotary stitched double webbed white with 6mm reveal profile (white/black), wherein, main T runner of size 42mmx14mm between main tee 600mm center-tocenter and secondary cross T of size 33x14x0.43mm thick of length 600mm long spaced inter-locked at middle of the first crossed T in each panel to form grid of 1200mmx600mm resting on periphery wall Profile wall section 19mm (7+7) x 19mmx0.40thicknesses and laying false ceiling for services like diffusers grills including cutting, making opening for light fittings, fixtures, , smoke detectors etc., wherever required. Main T runners suspended from ceiling with using G.I. soffit cleats of size 25x35x1.6 mm of required length fixed to the ceiling with 6mm dia and 50mm long dash fastener, 4mm dia G.I. adjustable rods with powdercoated/good quality G.I. level adjustment clips of 35x35x0.8mm spaced @1200, center-to- center along main T all complete at all heights as per the specifications, drawings and as pe

Supply & Installation of Modular Gypsum Trap door 600 mm x 600 mm as per Detail Design & Drawing or as per Diretion by Engineer In Charge.

Supply & Installation of Modular Gypsum Trap door 450 mm x 450 mm as per Detail Design & Drawing or as per Diretion by Engineer In Charge.

WALLPAPER & TEXTURE

Providing and fixing imported quality wall paper of 0.8 mm. thick of approved quality and design made up of poly venyl coating with fabric backing five resistant wipe cleaning strain resistant and having height of 390 Gram/Sq.M.. etc. and as directed by Engineer-in-charge Basic Rate 350/- Sft

EXTERIOR Texture paint : Providing and applying EXTERIOR Texture paint of ASIAN PAINT'S GRANIZA or equievatent of approved colour, shade and quality to old/new surfaces in two coates of luster paint including scaffolding, preparing the surfaces etc. complete. (including primer coat and laambi).(Asian, Dulux or equivalent)

Frosted Film for glass partitions Providing & fixing Roller blind made up of APO Grey or approved shade 100% polyester or polymer coated glass fi bre. with White coloured hardware • Bracket covers • Double bead plastic chain, secured with a child safety cord tensioner • Dual brackets • Linked brackets • Headbox • Side channels etc complete as approved by the Engineer in charge etc. all complete. (Hunter Douglas or equivalent)

CARPENTARY AND INTERIOR

Providing & Fixing 45-60 cm deep cupboard type storage unit made out of 19mm thick Mariane plywood of the requisite manufacture i.e.Anchor/Century/Kenwood/ Duro/Jet or equivalent generally confirming to I.S. 710 for frames, internal verticles horizontal divisions, shutters and 6mm & 12mm thick Mariane plywood with necessary locks, handles, hardware, lipping & beading patti (BTC) etc. The total shall be finished with formica laminate sheet in approved pattern with grooves etc. and two coats of french polish with antitermite treatment to plywood including all leads & lifts etc. complete. as per Architectrual drawing to be approved by Employer before entire scheme is finalsed and directed by engineer incharge.

Providing & supplying square / circular shape Dining Table 4 seater , made of SS metal frame, With laminate top edge moulding, with nylon buffers etc complete as per Architectrual drawing to be approved by Employer before entire scheme is finalsed and directed by engineer incharge.

Providing & supplying of Dining table chair with having cushion on seat and back with wooden leg complete as per Architect's Drawings. as per Architectrual drawing to be approved by Employer before entire scheme is finalsed and directed by engineer incharge.

Providing & suppling of Single Seater sofa made by using necessary ply & hardwood. Leg to be made by Teak wood with Watebase pu finished. Seat, Handrest and Backrest to be upholsered, complete as per design.

Providing & supplying of 2 Seater sofa made by using necessary ply & hardwood. Leg to be made by Teak wood with Watebase pu finished. Seat, Handrest and Backrest to be upholsered, complete as per design

Providing & suppling of 3 Seater sofa made by using necessary ply & hardwood. Leg to be made by Teak wood with Watebase pu finished. Seat, Handrest and Backrest to be upholsered, complete as per design.

Providing & supplying of Center Table made by using necessary ply of Mr Grade with Smoke Larch Veneer in sun burst pattern on Top. Wooden Base / Leg of Ash wood finished in Waterbase pu as per design. Size 900 x 600 x 450mm ht.

Side Table : Providing & fixing 40-45cm deep side table made out of 19mm thick Commercial plywood for all sides, 12mm & 6mm thick Commercial plywood for drawers of the requisite manufacturer i.e. Anchor/Century/Green ply/Kenwood or equivalent confirming to I.S. 303 with necessary approved fixtures & fastening and lipping patti for edges. The outer surface shall be finished with laminate sheets of approved make in approved pattern with grooves etc melamine poish for beading patti and antitermite treatment to wood work including all leads & lifts as per Architectrual drawing to be approved by Employer before entire scheme is finalsed and directed by engineer incharge.

WORK STATION - L1050/1200W600H750 Providing and fixing in place 600mm deep running counter made of Plywood with post form edge profile for 25mm thick table top consisting of a drawer pedestal of size 450mm x 500mm x 500mm & 400mm high Modesty partition with key board, CPU trolley for every 900mm of length and all the necessary hardwares etc. complete. All the exposed surfaces to be finished with 1.0mm thick laminate. (Ply & laminates of the requisite manufacuture viz.Anchor / Century / Marino or equivalent generally confirming to I.S.303 / I.S. 710- 1980) - Without Alumnium Partition

Medium Height Partition @ 1800/1200HT TILE BASED PARTITION SYSTEM:-Tile based Aluminum partition system of 1800/1200mm ht.made of 60 mm thk aluminum frames having two separate raceways for laying electrical & computer wiring.The wire management shall be throught otheraceway to be fitted at bottom of partition and other immediately below of work top with hook on type raceway cover for easy access of wires.Frames to be joined by aluminum connectors with M6 x 16 pan- head machine screw and washer with aluminum post cover.Post cover of snap on fashion to be connected on aluminum connectors .All visible aluminium to be in anodized finish.The top/exposed sides of the frame and posts should be covered with horizontal/Vertical trim and caps made of Aluminumin anodized finish in order to enhance its look.Upper tiles of partition to be in Soft Board or Marker tile of 9 mm .thk.,and plywood lower tiles in laminate finish of 9mm.thk.on both the sides.

Excutive table 2100 X 900 X 750 MM Providing and fixing in place, table of comprising of 25mm thick table top made of plywood with including modesty apron to be made out of 19mm thick commercial plywood. The table top to have post form edge. All complete including key board drawer, and necessary hardwares. all the external surfaces to be finished with 1.0mm thick laminate and internal surfaces to be finished with 0.8 mm thick laminate of approved shade. all complete as directed. (Ply & laminates of the requisite manufacuture viz.Anchor / Century / Marino or equivalent generally confirming to I.S.303 / I.S. 710- 1980)

Excutive table 1800 X 700 X 750 MM Providing and fixing in place, table of comprising of 25mm thick table top made of plywood with including modesty apron to be made out of 19mm thick commercial plywood. The table top to have post form edge. All complete including key board drawer, and necessary hardwares. all the external surfaces to be finished with 1.0mm thick laminate and internal surfaces to be finished with 0.8 mm thick laminate of approved shade. all complete as directed. (Ply & laminates of the requisite manufacuture viz.Anchor / Century / Marino or equivalent generally confirming to I.S.303 / I.S. 710- 1980)

CONCIERGE DESK :- Size of 1950 x 600 x 1050 mm Providing and fixing in place, table of comprising of 25mm thick table top made of plywood with including modesty apron to be made out of 19mm thick commercial plywood. The table top to have post form edge. All complete including key board drawer, and necessary hardwares. all the external surfaces to be finished with 1.0mm thick laminate and internal surfaces to be finished with 0.8 mm thick laminate of approved shade. all complete as directed. (Ply & laminates of the requisite manufacuture viz.Anchor / Century / Marino or equivalent generally confirming to I.S.303 / I.S. 710- 1980)

Executive chair W560xD600xH1200mm Providing & supplying Executive chair finished with PU leather, Wooden armrest, head rest with Nylon frame, Mesh back,mesh seat filled with foam,Five star nylon base with nylon casters.15cm and tilt tension, Swivel type, Powder coating base etc complete as approved by the Engineer in charge etc. all complete. (Wipro, featherlite or equivalent)

Visitor's chair W560xD560xH1000mm Providing & supplying visitor chair finished with leather mesh fabric, Fixed PP armrest, with Metal frame, seat filled with foam, with nylon buffers. Powder coating base etc complete as approved by the Engineer in charge etc. all complete. (Wipro, featherlite or equivalent)

Officer's chair W560xD560xH1000mm Providing & supplying Officer chair finished with Fabric, Mesh fabric, Fixed PP armrest, with Nylon frame, Mesh back,mesh seat filled, with foam, Five star nylon base with nylon casters lift, Adjustable seat height and tilt tension, Swivel type, Powder coating base etc complete as approved by the Engineer in charge etc. all complete. (Wipro, featherlite or equivalent)

Staff's chair W560xD560xH900mm Providing & supplying Officer chair finished with Fabric, Mesh fabric, Fixed PP armrest, with Nylon frame, Mesh back,mesh seat filled with foam,Five star nylon base with nylon casters.15cm gas lift, Adjustable seat height and tilt tension, Powder coating base etc complete as approved by the Engineer in charge etc. all complete. (Wipro, featherlite or equivalent)

Conference Table -Oval Shape (4000 L to 1510 x 750mm ht.) Providing and fixing in place, table comprising of 25mm thick table top made of calibrated plywood. All edges to be finished with 2 mm thick edgeband Rehau make with machined pressed and finished. Complete structure to be made of calibrated plywood all the external surfaces to be finished with 1.0mm thick laminate and internal surfaces to be finished with 0.8 mm thick laminate of approved shade. all complete as per Architectrual drawing to be approved by Employer before entire scheme is finalsed and directed by engineer incharge.

Providing and fixing plywood Laminated panelling, frame work as per requirement to be Fixed on wall/masonry/column with necessary fixing details to attain the reqd level of the surface, stability & rigidity. framework to be covered using 12 mm thick Mariane grade plywood as per design. Finished with 1 mm thick approved laminate from sides & top. Edges of laminate to be made smooth. Rate inclusive of necessary Cutouts for switches /lights & other fixtures Basic Rate of laminte Rs. 450/Sq.M..

Providing and fixing Bison Board panelling, frame work as per requirement to be Fixed on wall/masonry/column with necessary fixing details to attain the reqd level of the surface, stability & rigidity. framework to be covered using 12 mm thick Bison Board as per design.

Roller Blind Providing & fixing Roller blind made up of APO Grey or approved shade 100% polyester or polymer coated glass fi bre. with White coloured hardware • Bracket covers • Double bead plastic chain, secured with a child safety cord tensioner • Dual brackets • Linked brackets • Headbox • Side channels etc complete as approved by the Engineer in charge etc. all complete. (Hunter Douglas or equivalent)

Copper Colour Mirror with Panelling : Providing and fixing Copper Colour Tint Mirror panelling with framework 12 mm thick plywood finished with 8mm thk tint grey colour mirror fixed as per Architect's Drawings. (Plywood of the generally confirming toI.S. 710)

Providing and Fixing 600 *600 Grid of Aluminium section of size 50mm X 38 mm having wall thikness not less then 1.4 mm for all type of panneling wooden Frame work to create service route and to avoid undulation in panelling, to be fixed on existing surface with screw, complete as per Direction by Engineer In--Charge.

Providing and fixing full height toughened glass partion height more than 1.34m of 12mm thick with frosted effect including edge policy with necessary stainless steel finish heavy type brass patch fitting to hold the glass etc. complete

Providinng & Fixing Picture Frame as per Design & Drawing

Providing & Fixing Charcol Panel of Plain, Baffel design or as per Given Design for panelling, Ceiling etc. over rrready surface of wall / Partition / Panelling, etc, completed as per Architect design and instructions engineer in charge, basic Rate for charcol panel Rs. 550/- Per sft

PLUMBING

SANITARY FIXTURES & FITTINGS

Providing and fixing European type wall -hung white water closet of approved make with Consiled Cistern for flush valve, push valve concealed type with coverplate 32 mm size of approved make including Chair Bracket, soil pipe, vent pipe upto outside face of wall,100mm plug bend inlet pipe all fittings, cutting and making good walls, floors etc. complete.

Providing and fixing C.P.a 2-Way BIB cock with wall flange of approved make including necessary sockets/ union nut etc. complete as directed by Engineer in charge.

Providing and fixing Health Faucet : Providing and fixing health faucet jet spray of approved Jaguar or equivalent make including necessary socket/union etc. complete as directed.

Providing and Fixing Wash Basin : Providing and fixing "Hindware" or equivalent make Wash Hand Basin of Italian pattern and style of Olivia or similar series or fonte series, having star white as per Architecual drawing and directed by the Engineer-in charge etc. complete.

Providing and Fixing Pillar Basin Mixer : PILLER BASIN MIXER of push tap/ Hands free with sensor of approved Roca make or equivalent make including necessary socket/union etc. complete as directed.

Urinals : Providing and fixing white glazed wall mounted earthenware semi stall type urinals (of IS Std.) without cistern, with inlet pipes chrome finished push valve type tap, UUPVC flush pipe with fittings and flushing arrangement including UPVC soil pipe, UPVC trap and soil pipe connection upto outside face of wall, making good the damaged surface, chromium plated bottle trap, testing etc. complete. (Prior approval of sample and brand by Ex.Engineer is necessary before use.) Make - Roca or equivalent.

Providing and Fixing of Toilet Paper Holder in chromium plated finish as per approved sample Basic rate of Rs. 1000/-

Providing and fixing in position robe hooks in toilets as per approved sample basic rate of rs. 600/-

Providing and fixing stainless steel sink of size 600 x 510 x 200 mm including coupling, outlet pipe, elbow and other necessary fitting, finishing etc. complete.

Bottle Trap : P/F Bottle trap for wash basin

Providing and Fixing, testing and commissioning of C.P. brass angle valve with C.P. wall flange, Nut and Washer etc. complete as required.

C.P.sink mixer Supply of Sink Mixer - Jaquar note:- J shape spout with wall flange of heavy duty Jaquqr make (Wall mounted). (Sink cock with J shape spout Cat. No. FLR-5309N OR consider equivalent make)

Providing and fixing Soap Dispenser : with glass bottle of approved jaguar or equivalent make etc. Complete

P&F Towel ring : Providing and fixing Towel ring round flange of approved jaguar or equivalent make etc. complete.

Provding and fixing Steel High Speed Hand Dryer Supplying of Touch free stainless steel hand dryer Hand Dry Time : Less than 20 Seconds Motor : Brush Type, Dual Ball Bearings Protection Class: IPX1Blowing Volume : > 270 m3/ Air Speed : 95 m/s Basic Rate 15000/-

INTERNAL WATER SUPPLY SYSTEM

Supplying, installing, fixing, jointing, testing and commissioning of approved make. Chlorinated Polyvinyl Chloride pipes (cPVC) SDR.11 pipes confirming to ASTM standards with necessary fittings for internal toilet water supply upto 50 dia, and above 50mm dia pipe schedule 40 with fitting shall be schedule 80 ASTM IPS. The fittings and specials such as tees, elbows, couplers, bends, enlargers etc., with CPVC brass threaded combination / transition specials such as male adapters brass threaded female adapters, brass FPT Tee, Brass FPT elbow etc., where connection with metal is to be made including necessary drilling holes, chasing walls and making the same good in cement mortor 1:1 restore the same original condition neatly as directed by the Engineer in-charge. Joints to be made with CPVC solvent cement up to 50mm dia as per ASTM D-2846 and above 50mm dia primer P-70, and solvent confirming to ASTM F-4931 / 724. All exposed pipe shall be painted with latex paint. (for inside toilet & shafts). The rate shall include necessary GI supports, GI grip bolts, angle brackets, hangers, supports as with suitable GI U-clamps, bolts, nuts and washers etc., The clamps shall be painted with two coats of enamel (approved) paint over a coat of primer etc., complete. (For domestic water supply)

20 mm dia

25 mm dia

32 mm dia

40 mm dia

50 mm dia

Providing, fixing, jointing and testing, PN10 conforming to 1703 GM ball valves screwed end with SS lever operated of approved make, including flanges / unions, nuts, bolts, washers, etc. complete, as approved by Engineer-in-charge for water supply lines of the following nominal bore (NB) size:

20mm dia

25mm dia

32mm dia

40mm dia

Supplying & fixing Auto Air vent with in-built ball valve for water supply risers, suitable for pressure not less than 15 Kg/Sq.cm.

a) Air release valve size- 20mm

Supplying, fixing in position approved make PN16 GM non-return valve conforming to IS 778 with unions etc., complete.

40 mm dia

Supplying, installing and commissioning approved make Bronze Y type strainer screwed with necessary nuts and bolts, neoprene rubber gaskets, flanges, etc.., complete.

50 mm dia

DRAINAGE SYSTEM

Providing and fixing in position uPVC/SWR (Soil/Waste/Rain) pipe of type-B 110 mm dia. in any position including all fittings and accessories, making joints / connections water tight with solvent cement, scaffolding if necessary and making good the damages if any (excluding excavation and refilling the trenches) etc. complete as specified and directed.(All fittings and accessories like clamps,etc. should be of same brand. No separate payment shall be made for fittings and accessories).

Providing and fixing in position uPVC/SWR (Soil/Waste/Rain) pipe of type-B 75 mm dia. in any position including all fittings and accessories, making joints / connections water tight with solvent cement, scaffolding if necessary and making good the damages if any (excluding excavation and refilling the trenches) etc. complete as specified and directed.(All fittings and accessories like clamps,etc. should be of same brand. No separate payment shall be made for fittings and accessories).

Providing, laying and fixing P.V.C. pipe of 50 mm. dia. type-B with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing, laying and fixing P.V.C. Pipe of 40 mm. dia. type-B with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Supplying, fixing and testing PP multi floor trap with water seal of 50 mm deep with SS frame and cover 75mm dia outlet fixed on a bed of cement concrete with heavy duty type etc., complete.. (For hand wash & dish wash area)

Supplying, fixing and testing PP P-trap with brass CP frame and threaded cover (150mm x 150mm). Trap of 100mm dia. Inlet and 75mm dia outlet fixed on a bed of cement concrete with (Heavy duty type) etc., complete. (The frame & grating)

Drilling with core cutting machine in RCC beams, slabs floors etc., for laying pipes and rendering the same in RCC 1:2:4, finishing the same to the satisfaction of the Owner or his authorized representative etc., including nominal reinforcement wherever required, complete. RCC slabs - Depth of Slabs between 200mm to 300mm

a) 51mm dia upto 110 mm dia pipe

b) 111mm dia. upto 160 mm dia pipe

b) 160mm dia. upto 200 mm dia pipe

Providing & Fixing of PVC Multi Floor Trap 110x75x50mm Dia

Supplying, fixing and testing PVC P-trap with brass CP frame and threaded cover (150mm x 150mm). Trap of 100mm dia. Inlet and 75mm dia outlet fixed on a bed of cement concrete with (Heavy duty type) etc., complete. (The frame & grating)

Gully Traps : Supplying and fixing in position stone ware gully traps 150 x 150mm size with cover including brick masonary chamber of clear internal size as 300mmx300mm with cement plaster finishes

RWH - Recharge Pit Providing and constructing recharge pit of 2.0m deep and 1.0m dia of pre-cast RCC rings with 6.5" dia x 25m deep borewell at the floor of recharge pit including installation of combination of solid/perforated PVC casing pipe wrapped around with netlon mesh including 300mm thick sidefilling around outside of RCC rings (annular space) with 40mm size boulders including filling of recharge pit up to 0.5m depth with 25-75mm clean washed gravels from bottom up followed by 0.5m depth of 10- 25mm of clean washed stones followed by 0.5m of washed river fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) including netlon mesh between each gravel/fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) media layer including covering with RCC slab, manhole frame & cover, PVC rungs, PVC endcaps, fittings etc. including arrangement for inlet & outlet pipe excavation & backfilling as shown in the drawing.The rate shall be inclusive of all labour, material, wastage, scaffolding, transportation, taxes, including all leads, lifts at all levels. All material should be of approved make. All works complete as per the drawing, technical specification and direction of the Engineer in charge.

Providing and laying cement concrete pipe of IS458:2003 NP-3 class of 800 mm diameter in proper line, level and slope etc. complete.

PRESSURE BOOSTER SYSTEM(DOMESTIC& FLUSHING)(1W+1SBY) Above Price For Pressure Booster System Dom+Flus Each Set 1set = 2 pumps

1.5 H. P, Single phase 230V/3 phase 440V 50Hz 2900Rpm KSB make Horizontal Multistage S.S Inline pump. Each pump capacity 150 L.P.M at 25 Mtr discharge head with 3 Mtrs Submersible power cable.

System mount with complete horizontal MS Fabricated many fold typemounting base stand with necessary 80mm G.I “C “class main suction header withstrainer 65 mm flanges GI pipe with 50 mm Butter fly valve50 mm branch pipe line with Butterfly valve, N.R.V & 65 m.m Discharge header with Ball Valve, Branches For Each Pumps.

300 Ltrs Capacity Pre-Charged Diaghpram tank with Fittings.

Float Switch (Censor) with lid Wire.

Pressure Switch, Pressure Gauge with Fittings.

Cables as Per Requirement for Power & Controls.

Sewage Treatment Plant

Design, Supply, Installation and Testing of Sewage Treatment Plant of Commission 25 KLD with Commissioning Including of 5-10mm Spacing SS Bars, 1665 FRP Vessel Top Opening, Protected Surface Area450m2 Specific Gravity 0.9 MOC Virgin PP, 750 MM V shape Black, MOC Virgin PP, Pipes and Fittings (MS and cPVC) pipe, 1.5 m3/Hr., 15 M Head, Submersible Sewagepumps, 1.0 m3/Hr., 10 M Head,Self Priming Pumps, 1.5m3/Hr., 35 M Head Filter Feed Pumps, Air Blowers with a lot of Diffusers 50m3/Hr., 4000 MMWG Head, Motor as drive for blowers 1440 RPM, 3 Phase, 40 RPM, 0.5 kw 0.75HP Agitator, 6 LPH, 240 V, Single Phase pump with 40 Ltr chemical-storage, Control Panel & Cable.

HVAC SYSTEM

HIGHSIDE EQUIPMENTS

VRF Outdoor units

Supply of inverter /Digital scroll compressor with Variable refrigerant system connectable to multiple indoor units. Outdoor unit shall be factory assembled weather proof casing constructed from heavy gauge mild steel panels. The unit shall be completely factory wired and tested with necessary controls and charged with refrigerant. The compressor shall be highly efficient scroll type. The aluminium fins shall be covered with anti-corrosion resin. Unit shall be equipped with oil recovery system to ensure stable operation with long refrigerant piping. Units shall be tested and commissioned with additional refrigerant.

Unit Capacity

VRF Indoor units

Ceiling mounted 4 way compact cassette unit

1.0TR - 4-Way Cassette

1.6TR - 4-Way Cassette

Ceiling mounted 4 way cassette unit

2.0TR - 4-Way Cassette

2.6TR - 4-Way Cassette

3.2TR - 4-Way Cassette

Wall mounted hi-wall unit for vrf system

1.6TR - Hi-Wall

SITC of Wireless Remote

Supply, Installation, Testing & Commissioning of Energy Manaeger CRC

Supply, installation, testing & commissioning of Refnut Joints

Refnet (Y joint)

HI-WALL SPLIT AC INVERTER

1.6TR - Hi-Wall SPLIT AC -5 Star Inverter

2.0TR - Hi-Wall SPLIT AC -5 Star Inverter

LOW SIDE INSTALLATION

VRF (Cooling only) INDOOR UNIT & OUTDOOR UNITS

Installation, of inverter /Digital scroll compressor with Variable refrigerant system connectable to multiple indoor units. Outdoor unit shall be Including rubber pads for outdoor units etc.

Unit Capacity

VRF Indoor units

Installation of Indoor Unit Cassette Unit

Pressure testing and Refrigerant Gas charging between indoor & outdoor units.

Unit Capacity

Commisioning charges of ODU Unit

Installation Refnet (Y Joint)

Outdoor Units Stand

Fabrication and installation of MS base frame for outdoor units complete with epoxy painting, vibration isolation pads, supports, hangers, brackets etc for ODU unit

VRF ODU

Split Unit ODU

Refrigerant Piping with Superlon insulation & necessary support - VRV system

SITC of Under deck insulation with 25mm closed cell with all joints taped with 60mm self adhesive tape. Class 'O' insulation. Insulation shall have factory applied aluminium foil facing

Supply Installation & Testing of Control Cabling from indoor to outdoor unit.

2C X 1.5 Sqmm Cu sheilded cable

4C x 2.5Sqmm CU Flexible cable

Supply, Installation & Testing of power cabling from Indoor unit to supply point.

3C x 2.5 Sqmm CU flexible Cable

Supply, Installation & Testing of power cabling from Outdoor unit to supply point.

4C x 10Sqmm copper Armoured cable

Supply and Installation of PVC Drain piping with 6mm thick closed cell nitrile rubber tubular Installation with Necessary supports, screws, etc. Required u trap for all machines.

25mm Dia

32mm Dia

Supply and Installation of PVC Drain piping with 6mm thick closed cell nitrile rubber tubular Installation with Necessary supports, screws, etc. Required u trap for all machines. 40mm Dia

Sheet Metal Works

Supply, installation of sheet metal RECTANGULAR DUCTS complete with all accessories like flanges, all necessary MS supports with epoxy Painting, suspension rods , anchor bolts, GI bolts & nuts, etc.

24 gauge (0.60mm)

GI ducting Thermal insulation

Supply Installation testing & Commissioning of Flexible Ducts: As per below

Supply Installation testing & Commissioning of Volume Control Damper

Automatic duct flow controller for fresh air supply to cassette

Aluminium powder coated Exhaust Air Grille/ disc valve

Supply, Installation, Testing & Commissioning of Exhaust & Fresh Air Fan

150cfm / 10mm SP - Fans

300cfm / 10mm SP - Fans

500cfm / 15mm SP - Fans

600cfm / 15mm SP - Fans

Supply , installation,testing and commissioning of Fire retardent canvass connection to connect Fan mouth and duct with necassy supports and fittings,

Supplying and fixing Pin top for machine ( 15Amp / 05 Amp ) Make - Anchor or Equivalent or as per Direction by Engineer In Charge.

SITC of timeer for electrical room Indoor

Supply , installation of Out Door Unit Cowl Piece.

Supply & Installation of GI cable tray to protect the exposed refrigerant pipes

Cable tray with cover (300 mm x 75 mm)

Cable tray with cover (450 mm x 75 mm)

Cable tray with cover (150 mm x 75 mm)

2nd Year After Completion of Defectliability Period.

3rd Year After Completion of Defectliability Period.

4th Year After Completion of Defectliability Period.

5th Year After Completion of Defectliability Period.

ELECTRICAL WORK

L T PANEL & DISTRIBUTION BOARDS

MLTP PANEL

Deisgning, Supplying, Transporting to project site, Installing the Main Panel on a suitable MS fabricated stand 300mm above the floor level in approved manner, fixing of all the switchgear, controlgear and instrumentation using all the accessoires, proper termination, wiring with suitable size lugs, testing and successful commisioning. The components and the protection type are as below as per SLD- 1. IP43, 16SWG - Overall, 14SWG - Gland plates, Top entry 2. Powder coated - RAL7310 3. Base frame - 100mm C channel 4. Incomer - ATS - 160A 5. Outgoing - 100A, 63A, 80A etc feeders 6. SPD for the Main Incomer and AC Feeder

STREET LIGHT PANEL

12 Way TPN Per Phase Isolaton DB with 25A/32A/63A FP MCB as incomer, 3no. 25A/32A/63A DP RCCB, 30mA, Si for Phase segregation and 6A-32A SP MCB-36no. as outgoing as per SLD

12 Way TPN Per Phase Isolaton DB with 25A/32A/63A FP MCB as incomer, 3no. 25A/32A/63A DP RCCB, 100mA, Si for Phase segregation and 6A-32A SP MCB-36no. as outgoing as per SLD

12 Way TPN Per Phase Isolaton DB with 25A/32A/63A FP MCB as incomer, 3no. 25A/32A/63A DP RCCB, 300mA, Si for Phase segregation and 6A-32A SP MCB-36no. as outgoing as per SLD

12 Way SPN DB with 25A/32A/63A DP RCCB as 30mA incomer, and 6A-32A SP MCB 10no. as outgoing as per SLD.

Supplying, transporting to project site, installing and commissioning of 63A, FP, MCCB,10 KA in sheet metal enclosure.(Make- Legrand or equivalent )

SITC of 3-Ph Power Sockets at Shop Floor for Outdoor AC Units with 32A/40A, 5Pin, Socket & Plug (3P+N+E) - 1no; 32A/40A, TPN MCB+ELCB (100mA) - 1no etc complete mounted in IP65 Box. Plug & Socket must be of IP65 Type. (Make- Legrand or equivalent )

CABLES AND END TERMINATIONS

CABLES : Supplying and laying in ready built-up trenches / excavated trenches, through hume pipes laid by other agencies / on walls or on walls of lift shafts or on columns or on ceiling using G.I. spacers and G.I. saddles / G.I clamps made from G.I. strips, or on cable trays (cable tray supply & installation covered under item D.3) with nylon cable ties, the following XLPE insulated 1.1 KV grade, armoured and overall sheathed copper / aluminium conductor cables are made to IS:7098 (Part-l) 1988. Note: The quantity given in the quantity column is only indicative. The contractor shall bring to site cables as per actual requirement. Note: A2XFY/A2XWY stands for aluminium conductor armoured XLPE cable, 2XWY stands for Copper Conductor armoured XLPE cable.

3.5C X 150 Sqmm. A2XFY Cable

4C X 25 Sqmm. 2XWY Cable

4C X 16 Sqmm. 2XWY Cable

4C X 10 Sqmm. 2XWY Cable

4C X 6 Sqmm. 2XWY Cable

3C X 6 Sqmm. 2XWY Cable

3C X 4 Sqmm. 2XWY Cable

3C X 2.5 Sqmm. 2XWY Cable

3C X 2.5 Sqmm. YY Cable

1C X 16 Sqmm. YY Cable

EndTermination:Supplying and making end terminal joints to the following 1.1 KV grade PVC insulated armoured overall sheathed copper / aluminium conductor XLPE cables, using nickle plated cable glands, copper compression type cable sockets , PVC insulating tapes, etc.

3.5C X 150 Sqmm. A2XFY Cable

4C X 25 Sqmm. 2XWY Cable

4C X 16 Sqmm. 2XWY Cable

4C X 10 Sqmm. 2XWY Cable

4C X 6 Sqmm. 2XWY Cable

3C X 6 Sqmm. 2XWY Cable

3C X 4 Sqmm. 2XWY Cable

3C X 2.5 Sqmm. 2XWY Cable

3C X 2.5 Sqmm. YY Cable

1C X 16 Sqmm. YY Cable

1C X 6 Sqmm. YY Cable

LIGHT AND POWER POINT WIRING

sub main Light Point wiring from distribution board to switch board using 2Rx2.5Sq.M.m & 1Rx1.5Sq.M.m FRLS PVC wire 1100 V grade in 25mm PVC conduit, including cost of providing saddles.

sub main Power Point wiring from distribution board to switch board using 2Rx2.5Sq.M.m & 1Rx2.5Sq.M.m FRLS PVC wire 1100 V grade in 25mm PVC conduit, including cost of providing saddles.

sub main Power Point wiring from distribution board to switch board using 2Rx1.5Sq.M.m & 1Rx1Sq.M.m FRLS PVC wire 1100 V grade in 25mm PVC conduit, including cost of providing saddles.

SITC of Primary Light Point controlled by one 6A SP Switch.(Point Length will be Avg. 6Mtrs for first point from Switch Board .)

SITC of Secondary Light Point.(Point Length will be Avg. 3Mtrs for first point to Second point .)

SITC of conceled/above false ceiling Ceiling Fan Point with 2X1.5 sq. mm + 1X1 sq. mm FRLS PVC Wiring in pvc pipe (of ISI Make) along with Modular 6A Switch & 5 Step Fan Speed Regulator in modular box with all other required accessories etc. complete. ( ONE POINT CONTROLLED BY ONE SWITCH ) . Point Length will be Avg. 6Mtrs for first point from Switch Board .

2 Nos of 6A 5-pin sockets and 1 Nos 16A SP switch in suitable backbox along with front plate.

2 Nos of 16A 5-pin sockets and 2 Nos 16A SP switch in suitable backbox along with front plate.

1 Nos of 6A 5-pin sockets and 1 Nos 6A SP switch in suitable backbox along with front plate.

1 Nos of 16A 5-pin sockets and 1 Nos 16A SP switch in suitable backbox along with front plate.

1 Nos of USB Socket and 1 Nos 6A SP switch in suitable backbox along with front plate.

Supply & installation 6/16A 3 pin top for AC machine

LIGHT FIXTURE

Supply, Installation & Commissioning of following lighting fixtures with required material including necessary accessories, wiring connection, chain, down drops, supports etc.(Make - Wipro, Havells, Legero 0r Equivalent)

15 W Recess Mounted Down light

9 W Recess Mounted Down light IP 65

41 W Recess Mounted Down light IP 65

40 Watt Surface / Pendent Mounted LED Batten Fixture IP65

LED Strips 5watt/mtr with 25watt Driver.

Supply & installation of 25W bollards.

Supply and Installation of Wall light 2x12W Make - Wipro, Havells 0r Equivalent or as per Direction by Engineer In Charge.

Supply & Installation of wall Light 2 x 18 Watt Make - Wipro, Havells 0r Equivalent or as per Direction by Engineer In Charge.

Supply, Installation, Testing & commissioning of Occupancy / ultrasonic Sensor Make - Wipro, Havells 0r Equivalent or as per Direction by Engineer In Charge.

SITC of Supplying and erecting Insect Catcher

BLDC Ceiling fan, 26 watt to 30 watt, 1200 mm sweep, energy efficient Sweep, with regulator and remote control, suitable for single phase, 230V, 50Hz, A.C. supply operation complete with accessories such as 15" long down rod, canopies,

SITC of Supplying and erecting Exhaust fan medium duty 230 V A.C. 50cycles 225 mm. 1400RPM with condensor complete erected in positionwith necessary materials. Fanmotor with moisture proof treatment and‘E’ class insulation and marking Sr. No. & date of erction.with Louvers to be erected in the aluminium frame.

Supply,Installation,Testing & commissioning of 9M Height Street Light Pole with singe arm without light fixture

Supply & installation of 120W LED flood light

Providing cement concrete foundation including excavation for the poles 60 cm x 60cm x deep 1/6 of pole length in 1:3:6 cement concrete (20 x 25 mm stone metal) and 45 cm x 45 cm x 45 cm /45 cm dia. x 45 cm. height plinth duly plastered and with necessary curingand finishing in an approved manner. (for above 9 m poles)

Supply,installation, testing and commissioning of Pole mounted Control Box weather proof hot moulded glass reinforced polyester pole mounting type with 25A SP MCB as a I/C &4 Nos. 10 A SP MCB as a O/G with elmex terminals suitable for termination of incoming & out going cables of 3.5 x 35sq.mm 1.1 Kv grade AL.armoured cable and 3 nos of 2.5 sq.mm copper conductor pvc insulated wires upto lamp &2 Nos. of 8 SWG G.I earthing wire with 2 Nos of 25mm Dia.& 1mtr Long GI pipe for pole eathing buried in 1000mm below ground Level .complete in all respect..

CABLE TRAY & TRUNKING

Trunking & Cable Tray. Supply Installation Testing Commissioning of readymade hot dip GI perforated 2mm Thk Trays with coupler Plates with Plated Nut Bolts for Tray Connection, PVC Gaskets at each bend & branching on which cables passes to avoid cutting of cables . Including Manufactured bends, Tees, Reducers as required. Mtre to be quoted with erection on provided supports as supply & erection of supports is considered seperately.But GI Hardwarefor fixing cable trays to be inculded. Including supply & erection of Rubber Pads between cable tray & supports along with green passivated GI plated nut bolts for connetion.

200X50 mm GI Perforated Cable Tray

300X50 mm GI Perforated Cable Tray

Trunking & Cable Tray. Supply Installation Testing Commissioning of readymade hot dip GI perforated 2mm Thk Trays with coupler Plates with Plated Nut Bolts for Tray Connection, PVC Gaskets at each bend & branching on which cables passes to avoid cutting of cables . Including Manufactured bends, Tees, Reducers as required. Mtre to be quoted with erection on provided supports as supply & erection of supports is considered seperately.But GI Hardwarefor fixing cable trays to be inculded. Including supply & erection of Rubber Pads between cable tray & supports along with green passivated GI plated nut bolts for connetion.

200X50 mm GI Perforated Cable Tray Cover

300X50 mm GI Perforated Cable Tray Cover

Supply and Installation of tie rod of 10 mm full threaded type with slotted channel as required for mounting of cable tray.Note- 1set include two nos of vertical rod and one horizontal slotted channel complete with anchoring in the ceiling. (For cable Tray support)

SITC of M.S fabricated supports for cable trays of M.S sections (ISA/ISMC/ISMB/Plates/Flats etc.) welded to structure / clamped to sturucture / wall, using anchor bolts where required including G.I. hardware & painting with Two coats of Red oxide primer & 2 coats of enmel paint of approved shade. (colour As per Ex. Plant) (Fabrication & Erection to be quoted under erection under, supply include only steel supply.)

Supply, Installation, laying & terminating of GI Trunking 200X75

Supply, Installation, laying & terminating of GI Trunking 100X50

RACEWAY AND PVC CONDUITS

PVC conduits,Aluminium Raceway & Floor Junction Box: - Supplying, Installation, Testing & Commissioning of following G.I junciton boxes in floor of 14 SWG thick duly painted. The rate shall be inclusive of providing Sand, Cement etc. and finishing the same upto the floor level as per instructions of the Architect. MK make or equivalent Junction box

100 x 40 mm Aluminium raceways, 2mm thick.

Supplying and fixing Floor Junction Box (Weatherproof )with knock-outs on all sides suitable for Raceways/conduits. The knock out shall be removed at site as per requirements. The junction boxes shall be laid in trenches for Raceways/conduits . The top cover shall be fixed with counter sunk screws. (For floor trenches).

Providing & Fixing 2mm thick SS cover plates. Cover plates shall be champhered at all edges

250mm X 250mm X 2mm for tile mounting.

200mm X 200mm X 2mm for tile mounting.

Supply, Installation, laying & terminating of 25mm FR MMS ISI Mark PVC conduits in floor/ceiling with junction & complte with its all accessories. (Make- Precision or Equivalent )

Supply, Installation, laying & terminating of 32mm FR MMS ISI Mark PVC conduits in floor/ceiling with junction & complte with its all accessories. (Make- Precision or Equivalent )

Providing & fixing of Readymade Polycorbonate unbreakable Junction box with 15A, 4way connectors and knowout for 4 cable entry of following size.

100 x 100 x 50mm.IP65

150 x 150 x 50mm. IP65

300 x 300 x 50mm. IP65

EARTHING PROTECTION

SITC of Early Streamer Type Lightning arrester with Covering Protection Radius of 65 mtrs to be installed on top of the factory roof, with proper clamping of down earth conductor for connection of lightning arrestor to earth pit (supply of down conductor is considered in other item). with Event Counter etc complete. (Lightening Protection for Factory Area) (Similar to Make - Indelec, Protection Level II, )

Supply, Installation of Aviation LED lamps or as per Direction by Engineer In Charge. Make - ISI Mark.

Earthing using maintenance free earth electrode with chemical treatment 3mtr. Long, inner pipe dia 40mm & outer pipe dia 80mm, Including boring of hole upto 6.5 mtrs. in all types of strata as required. The electrode shall be electrolytic grade GI tube pre-filled with hygroscopic powder and low resistive backfill material. (Earth Resistance value shall be achieved to less than 2 ohm)

Earthing using Maintenance free earth electrode with chemical treatment, 3mtr long, 32mm dia. high tensile, low carbon steel circular rod with molecularly bonded Copper of thickness 250 Micron on outer surface, 50x6mm Cu earthing strip from electrode terminal upto disconnecting link in chamber at top etc. Scope includes boring hole upto 6.5 mtrs in all types of strata as required.

Supply, fixing / placing of PVC pipe of 150mm dia.as casing to the earthing pit only for filling portion to retain surrounding soil. (Casing shall remain permanent for this filling area.)

Additional cost of Concrete inspection chamber with heavy duty concrete cover in lieu of brick masonary chamber & C.I. cover. Concrete chamber & cover shall be suitable for movement area / roads.

Supply, tagging, laying or fixing, testing of GI / CU earthing strip / wire in ground at a depth of 600mm including excavation in all type of strata except hard rock or in readymade trenches with necessary clamps, revette jointing as per specification complete as required.

32mm x 6mm thick GI strip.

25mm x 6 mm thick GI strip.

25 mm x 6 mm thick. Cu strip.

25mm x 3 mm GI Strip down conductor mounted on porcelain insulator for Lightning Arrestor.

Supply and installation of earth busbar box consisting of 50 x 6 mm, 300mm long GI. Strip with multiple tapping and nut bolt arrangements etc. mounted on SMC insulators. Box shall be fabricated from M.S. sheet including powder coated, clear acrylic hinged door etc. complete.

UPS SYSTEM

Supply,Installation, testing & commissioning of 3Phase Input & 3Phase Output UPS with 30 minutes Battery back up and sealed maintenance free lead acid maintained in battery racks complete with interconnections, Cu battery cables, Battery breakers. The rack shall be sturdy M.S. section fabricated with powder coating The scope shall include terminals & busbar shrouding for Battery terminals & connections. (Note:- Battery store shall start 150mm above FFL.)

1 No. x 30kVA UPS arrangement as per given specifications and details.

Supply, Installation of Sealed maintenance free valve regulated lead acid (VRLA) Battery (with reverse polarity protection MCCB) as per specifications complete suitable for following UPS sizes (Bidder should furnish the battery calculations for 30 minutes backup along with the BOQ). Note: The scope also includes complete SITC of cables, DCDBs, DC MCBs, required for battery interconnection as well as interconnections betwwen batteries and UPS with required all accessories.

30 KVA UPS (30 minutes).

Installation of battery rack floor mounting as per specifications with necessary fabrication complete for following sizes.

30 KVA UPS (30 minutes).

DG SET

Supply, Transporation, Unloading at site , Installation , Testing and Commissioning of 'Silent Type' Diesel Generating set (outdoor type) with AMF Function having Power rating of ____ KVA, 415 Volts at 1500 RPM 0.8 Lagging power factor, consiting of the followings. The scope also includes the exhaust piping with Al cladding / insulation including the support structure of exhaust pipe as per CPCB norms & also obtaining approval /Permission from CPCB/Goverment electrical Inspector, Local Muncipal authority etc. DG set also iclude the fuel piping, First charging of Dry Batteries & First fill of Labrication oil. Diesel Engine: Diesel Engine: 4 stroke radiator cooled type with necessary fan, electric start with Electronic Governer, of suitable BHP at 1500RPM suitable for ____ KVA output of alternator at 45 degree C ,90% RH & 550 Meter MSL and confirming to BS 5514, BS 649, IS 10000, capable of taking 10% over loading for one hour after 12 hours of continious operation. The engine will be fitted complete with all the required accessories.The scope includes testing of engine. Alternator : Alternator rated at ____KVA, 415 Volts 50Hz at 1500 RPM,3 phase 50 Hz, AC supply with 0.8 lagging power factor at 45 degree C,90%RH & at 550 meter MSL. The alternator shall be SPDP enclosure, brushless, continious duty, self excited and self regulated through AVR confirming to IS 4722/BS2613 suitable for tropical conditions and with class F/H Insulation. The scope also includes required control cables between D.G. set to AMF panel to complete the works including required routine test at manufactures works & site test as per specifications. Adopter Box for cable termination with extension bus bars for termination suitable for Armoured cable power cables.

160 KVA D.G. Set with acoustic canopy, battery, AVM & 990Litre diesel tank etc.

LIFT WORK

10 Passenger/680 Kgs – 03 Stops – MRL Type Elevator Protection Independent Service (for Duplex only) Overload Device Nudging Emergency Car Light Unit Infrared Curtain Door Protection Door Time Protection Emergency Alarm Button Extra Door Time of Lobby & Parking Door Open/Close Button Manual Rescue Operation Belt Inspection Drive Auto Fan Cut Off)

Supply, installation, testing of set of Bulkhead fixture with 9 W LED or wattage as per lift vendor and 1 No. 5A, 3 pin socket + switch on common good quality board in lift pit.

Supply, fixing, testing, of good quality industrial interlocked switched sockets with MCB's of different ratings in readymade IP 65 Polycabonate unbreakable enclosure. Box should be suitable to terminate cables / wires easily, complete as required.

20A 1Ø, 3Pin Socket and plug with 20A SP MCB in a Readymade Box.

40/63 A 4 Pole RCCB 100mA + 25A DP MCB in single readymade box for lift machine room.

MISCELLANEOUS ITEMS

Supply, installation of material equipment required as per statutorial provision & safety.

1.1 kV class Handgloves pair.

Laminated First aid chart with frame.

First aid box.

High Voltage Electrical Insulation Synthetic Mats, ISI Marked,confirming to IS:15652-2006. Types: Class C; for 1100V, Flame Retardant, Shock Proof, 1000 mm in width, pastable, Acid/Alkali/Diesel/Oil Resistant, CPRI/ERDA tested & Approved, Black/Gray in color etc.

415V Dangerboards of appropriate size & marking.

NETWORKING & TELEPHONE SYSTEM

Supply,installation, laying and commissioning Cat 6 UTP cable with accessories i.e.conduit pipe, clamp etc.Complete

Supply, Installation testing and commissioning RJ-45 Cat-6 Information Outlet with face plate with accessories i.e.conduit pipe,clamp etc.

Supply,installation, laying and commissioning Cat 6 UTP cable with accessories i.e.conduit pipe,clamp etc. Complete

Supply, Installation testing and commissioning RJ-11 Information Outlet with face plate

Supply, Installation testing and commissioning Cat-6 Patch cord 2 meter at user end

Supply, Installation testing, jumpering and commissioning 50 +50 Pair MDF Box with krone module

Supply, Installation testing and commissioning 50 Pair riser Cable with termination,punching & jumpering of telephone cable

Supply Installation Testing Commissioning of 42U rack or as per Direction by Engineer Incharge.

Supply, Laying, termination & Commissioning of RG-6 TV CABLE

Supply, Installation, Termination & Commissioning of TV socket termination box with blank PVC cover plate and GI Box .

SITC RJ-4,Boot Cover

Providing & Fixing LIU Loaded

Providing & Fixing Fiber Patch Cord

Providing & Fixing 6 Core MM FIBER Cable

Supply Installation testing & Commissiong of fiber splicing for camera work (per pair) or as per Direction by Engineer In Charge.

Supply Installation testing & Commssiong of Fiber termination box for outdoor camera, or as per Direction by Engineer Incharge.

Supply, Installation, Testing & Commissioning of 40mm HDPE pipe

Supply, Laying, termination & Commissioning of fully loaded patch panel.

Supply, Installation,Testing and Commissioning of Wi-Fi access point

Supply, Installation, Laying and Commissioning Cat 6 UTP cable for Wi-Fi Router with accessories i.e. conduit pipe, RJ45, clamp etc. complete

Supply, Installation, Laying and Commissioning 12 core armoured Optical Fiber cable with accessories.

Supply, Installation, Testing & Commissioning of 40mm HDPE pipe

Providing & Fixing LIU Loaded

Supply Installation Testing & Commissioning of fiber splicing

Supply, Installation Testing and Commissioning 50 Pair riser Cable with Termination, Punching & Jumpering of telephone cable

PA SYSTEM

SITC ceiling/wall mounted 6W speaker with line matching transformer including necessary accessories Make Honeywell

Supply of Booster Amplifier for PA system with RMS output (actual) 480 W . 480W,Power reduction on backup power -1 dB,Frequency response ,60 Hz to 18 kHz (+1 / -3 dB at-10 dB ref. rated output,Distortion,<1% at rated output, 1 kHz,Max power consumption 1600 VA, Multiple outputs - 70 V / 100 V and 8/4 ohm,Temperature controlled forced front to back ventilation, directly stackable. Make BOSCH

SITC of Speaker Cable 2 core X 1.5 sqmm shielded Audio cable. Legrabd Make

Supply, Installation of 12 U rack for PA system

Table Top microphone with mounting stand.

CCTV WORK

Supply, installation, esting and commissioning of 5 Megapixel Full HD Indoor Fixed Dome camera

Supply, installation, testing and commissioning of 5 Megapixel Full HD Indoor Fixed Bullet camera

Supply, installation, testing and commissioning of 4 Megapixel PTZ Camera , 30X optical & 16X digital Zoom

Supply, Installation, Testing & Commissioning of NVR 32 CH with 80TB Storage

Supply, Installation, Testing & Commissioning of 49" LED Professional Monitor

Supply, Installation, Testing & Commissioning of 4K HDMI Cable 10 Meter length

Supply, installation, testing and commissioning 12U Rack wall Mounting

POE Edge Switch 8 Port

Supply, installation, testing and commissioning of 3KVA Online UPS

Supply,installation, laying and commissioning Cat 6 UTP cable

Supply, Installation, Testing & Commissioning of 9 U Rack

Providing & fixing Cat 6 IO camera & rack side

Providing & fixing 24 port jack panel unloaded for outdoor rack ( Make-D-Link)

Providing & fixing SFP Transceivers oudoor switch & building switch

Providing & fixing 1000Base-T Copper SFP Transceiver (PC & NVR)

LIU Loaded

Fiber Patch Cord

Supply, Installation, Testing & Commissioning of 8 Port PoE Switch with 2 SFP Ports (Industrial Grade)

Providing & Fixing 6 Core MM FIBER Cable

Supply Installation testing & Commissiong of fiber splicing for camera work (per pair) or as per Direction by Engineer In Charge.

Supply Installation testing & Commssiong of Fiber termination box for outdoor camera, or as per Direction by Engineer Incharge.

Supply, Installation, Testing & Commissioning of Armoured CAT-6 Cable

Supply, Installation, Testing & Commissioning of Power Cable 3 C x 2.5 Sq. mm Armoured

Supply, Installation, Testing & Commissioning of 40mm HDPE pipe

Providing cement concrete foundation including excavation for the poles 60 cm x 60 cm x deep 1/6 of pole length in 1:3:6 cement concrete (20 x 25 mm stone metal) and 45 cm x 45 cm x 45 cm /45 cm dia. x 45 cm. height plinth duly plastered and with necessary curing and finishing in an approved manner. (for above 9 m poles)

Pole for Camera

Supply, Installation, Testing & Commissioning of Security Signage

SECUIRTY SYSTEM & EQUIPMNET

Supply, Installation, Testing & Commissioning of walk through metal detector with cemera & superimposed data on video - 106F. Alarm - Acoustic and Optical alarm, height onperson bar display (Metal Locator), Metal Level Display - 12 LED based bar graph is provided in the console to display volume of the metal carried in GREEN, 2 Signal Processing - Microcontroller based with I2C interface,

Supply, Installation, Testing & Commissioning of Micro Controller Based with Standalone DVR + 1 TB HDD + 18.5 inch Monitor for walk through metal detector.

Supply, Installation, Testing & Commissioning of Ladies Frisking Booth. Diamention - Lenght-4ft 4 inch, Height - 6.5 ft, Width- 4ft 4 inch, Mild steel with powder coating material.

Supply, Installation, Testing & Commissioning of Padestrian Swing Barrier (Single Lane) with SS 304 Grade Cabinet - Matt finish with 520 mm passage, DC brushless Motor, & Acrylic flap + Safety Sensor Lane indicator on Top Cabinet With Tailgating feature

Supply, Installation, Testing & Commissioning of elescopic Boom Barrier length- 6mtrs, Operation time : 6 Sec, Drive : Electro-Mechanical, including Remote, Push Button, Pair of Photo Sensor, Base Plate, Boom & Boom Rest

Supply, Installation, Testing & Commissioning of Hand Held Metal Detector With Dry & Rechargeable battery & Charger

Supply, Installation, Testing & Commissioning of Red / Green LED Signages with installation bracket etc

CABLES : Supplying and laying in ready built-up trenches / excavated trenches, through hume pipes laid by other agencies / on walls or on walls of lift shafts or on columns or on ceiling using G.I. spacers and G.I. saddles / G.I clamps made from G.I. strips, or on cable trays (cable tray supply & installation covered under item D.3) with nylon cable ties, the following XLPE insulated 1.1 KV grade, armoured and overall sheathed copper / aluminium conductor cables are made to IS:7098 (Part-l) 1988. Note: The quantity given in the quantity column is only indicative. The contractor shall bring to site cables as per actual requirement. Note: A2XFY/A2XWY stands for aluminium conductor armoured XLPE cable, 2XWY stands for Copper Conductor armoured XLPE cable.

3C X 2.5 Sqmm. YY Cable

2C X 2.5 Sqmm. YY Cable

4C X 2.5 Sqmm. YY Cable

EndTermination:Supplying and making end terminal joints to the following 1.1 KV grade PVC insulated armoured overall sheathed copper / aluminium conductor XLPE cables, using nickle plated cable glands, copper compression type cable sockets , PVC insulating tapes, etc.

3C X 2.5 Sqmm. YY Cable

2C X 2.5 Sqmm. YY Cable

4C X 2.5 Sqmm. YY Cable

Supply,installation, laying and commissioning Cat 6 UTP cable with accessories i.e.conduit pipe, clamp etc.Complete

SAPPHIRE SYSTEM FOR SERVER ROOM

Supply, installation, testing & commissioning of the following items as mentioned below inlcuding necessary accessories as requires: Make: Kidde, Tyco, UTC, Siemens

Seamless cylinder of 80 Ltrs capctiy to store Sapphire Gas along with necessary MS painted stand & wall fixing bracket as requires to install the cylinder (Main Cylinder)

Novec 1230 Fluid factory

Electrical Actuator cum conventional fire alarm panel with a set of 6 nos. different type of detectors with cabling works, necessary terminal blocks, fire alarm with cross zoning funcion with built-in delay timer, Actuator should be capable to accept the signal from building Main Fire alarm panel.

Manual Release / Abort stations along with back box & necessary glass on top

Flase light fixture indicates in Bold Capital letters "DO NOT ENTRE" / "EVACUATE", price should be inclusive of necessary lamp & fixing bracket as requires.

Discharge Nozzles of 3600 50mm dia

Electrical actuator panel suitable to accept signal from Main fire alarm.

Manifold with necessary male female connectors.

Flexible hose lines with necessary couplers (Male / female)

Pressure Switch

Piping,Fitting for 80 Ltrs with all ACCESSORIES

Seamless MS painted Piping, fittings & supports, etc.Price should be inclusive of all necessary fixing accessories, joints, bends, couplers, paintaings as requires. Make: Jindal/Tata

32 mm dia.

PEST REPELLENT SYSTEM

Supply, installation, testing & commissioning of the Ultrasonic repellent system comprisies of following Make: C-System, Maser

Master consol for generating high frequency sound waves i.e. 20KHz to 50KHz as requres with adjustable nobe, power supply card etc.

Satellites connected with each master consol

2 core x 1.5 Sqmm FRLS PVC Copper cable existing in conduit along with all accessories.

Hooter

WATER LEAK DETECTION SYSTEM

Supplying, installing, testing and commissioning of Water leak detection control panel of 4 zone type consisting with features like, Auxiliary alarm contacts, Monitored alarm outputs,Open & short circuit line monitoring, Bright LED's for indication. Panel shall have lockable enclosure. The panel shall work on 230v AC & also should have built in battery back up.The panel shall have accept / reset / aknowkedge buttons and it shall be wall mounted type.

Supplying, installing, testing and commissioning of Electronic Hooter for water sensing indication.

Water leak sensing cable twisted of 15 mts. long, mechanically strong, resistant to corrosion and abrasion. The cable shall be constructed with two sensing wires,an alarm signaling wire and an continuity wire and all shall be in a fluoropolymer carrier ( OR equi. material).The cable shall have factory installed connectors that can help to plug other cable together for extension. The cable shall be rugged in construction, no metal exposes, enables it to be reusable even in corrosive environment. Quoted price shall inclusive of all fixing accessories, end caps and probes (if required).

VESDA SYSTEM

Supply, installation, testing and commissioning of followings: System shall be BMS compatible for remote monitoring Make : VESDA, Honeywell, Schrack Seconet

VESDA Laser Compact (VLC 800)

Power Supply Unit for above Detection system

Aspiration Tubes

Capillary Tubes

Air Termination (Nozzles)

Electronic Hooter

Supplying, installing, testing and commissioning approved make 16 SWG MS conduits on ceiling / wall / floor etc. complete with accessories like, Junction boxes, Collars, Bends etc.

25 mm dia.

FIRE ALRAM SYSTEM

S/I/T/C of 04 Loop Addressable Fire Control Panel, Make Honeywell Morley UL Approved,

S/I/T/C of Repeater Panel Make Honeywell Morley UL Approved

S/I/T/C of Addressable Multisensor/ Photoelectric Detector with mounting base Make Honeywell Morley

S/I/T/C of Addressable Heat Detector Make Honeywell Morley UL Approved

S/I/T/C of Addressable Response Indicator.

S/I/T/C of Addressable Manual Call Point.

S/I/T/C of Addressable Stob Light Hooter

S/I/T/C of Addressable Isolator Module

S/I/T/C of Addressable Module

S/I/T/C of Addressable Control Module.

Supply & installation of Beam Detector Six levels of sensitivity,Fully integrated infrared sensing, Mounting Base for below false ceiling (Make.- Honeywell Morley or Equivalent)

Supply and Laying 2 Core x 1.5 sq. mm Polycab Make, Copper Armored Cable.

Supply & Installation of UPS / BATTERY of Exide co.

FIRE FIGHTING SYSTEM

FIRE PUMP ROOM

S/I/T/C of Electric Motor Driven Fire Pump set of 1600 LPM @ 56 m head, with Bronze Impeller, Motor, Coupling, Base Plate and foundation bolts matching flanges with gasket and fastners wth all complete.

S/I/T/C of Diesel Engine Driven Fire Pump set of 1600 LPM @ 56 Mtr head with Bronze Impeller, Engine, Base plate, coupling with coupling guard, foundation bolts, automatic air release valve, fuel tank with engine exhaust line silencer, matching flanges with gasket and fastners and battery with battery charger including 100% standby

S/I/T/C of Electric Motor Driven Jockey Fire Pump set of 280 LPM & 70 Mrs. Head with Bronze Impeller, Motor, Base Plate, foundation bolts and matching flanges with gasket and fastners.

S/I/T/C of Electric Driven Booster Pump of cast iron body and Bronze Impeller with stainless steel shaft, mechanical seal and floor of 900 LPM & 35 m conforming to IS:5120 suitable HP, SQ cage induction motor suitable for opeMtrion on 415 Volts.

S/I/T/C of Diesel Engine Starter Control Panel Solid-State, as per Spec. Wall mounted type for the Auto & Manual OpeMtrions of the Pump set, etc, along with the Battery Charger Power & Control Cabling from the Engine to Control Panel with Earthing & Inter-locking, having, Fuses AC / DC type, P.L.C. Based, Switches, Meters, Audio / Visual Alarms and Indicating Lamps, with Analogue Solid State Designs, with 3 Cold Impulses Starter for Deisel Engine of Standby Pumpset with Sequential OpeMtrion Circuitries.

Providing & Fixing of Fire Water Tank Model No. ZA07R2 Metal Storege 50 Kl Capicity ZnAI Tank. FM Approved Dia (Mtr) 6.46 Height (Mtr) 2.10 Gross Value ltr 68,795, each Tank Tank shall Included wall, self Supporting Dome roof 2 Nos of HDG Nozzel F&B type level Indicator Turbine vent (SS) Access hatch on Roof of TAnk External Cage Laddder & International Rope Ladder with Installation as per Installed JNPT Project.

SITC of Pressure Gauges with Syphon Tube and Cock 150mm Dial Range - 0 to 1kg /cm2.

SITC of Pressure Switches with Tubing, Control Cabling upto Panel, complete.

SITC of MS ERW Piping as per IS : 1239,part-I, heavy grade up to 150 NB and IS:3589, 6.35 mm thickness, including pipe fittings ,flanges, pipe supports such as c clamps, threaded rods, fastners.

200 mm NB 'C' Class

150 mm NB 'C' Class

100 mm NB 'C' Class

80 mm NB 'C' Class

65 mm NB ‘C’ Class

Supplying and erecting G.I. pipe ‘C’ class ERW 50 mm dia with necessary fittings duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete as per specification no. FF-PP

25 mm NB 'C' Class

SITC of double flanged wafer type lever operated / wheel operated Butterfly valve of 200 psi Mtring including matching flanges, bolts/studs, nuts, washers & gaskets.

Supplying and erecting 200 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure Mtring, as per specification no. FF-VL/BFV

Butterfly Valve 150 mm dia with matching flange, nut & bolt etc. Make Marc/Turbo/ Normex /Equvt

Supplying and erecting 100 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure Mtring, as per specification no. FF-VL/BFV

Supplying and erecting 75/80 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure Mtring, as per specification no. FFVL/BFV

Supplying and erecting 65 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure Mtring, as per specification no. FF-VL/BFV

SITC of 150 NB Four way Fire Brigade Inlet Connection having inbuilt non. return valve with 04 nos. of 63 mm GM instantaneous inlets for fire water tank.

SITC of Non Return Valves Dual plate with Matching Flanges, bronze internal, EPDM seat, 200 psi Mtring, suitable horizontal & vertical installation.

Supplying and erecting 150 mm dia cast iron double flange ball type NRV complete with PN16 pressure Mtring, as per specification no. FF-VL/NRV

Supplying and erecting 100 mm dia cast iron double flange ball type NRV complete with PN16 pressure Mtring, as per specification no. FF-VL/NRV

SITC of Non Return Valves Dual plate with Matching Flanges, bronze internal, EPDM seat, 200 psi Mtring, suitable horizontal & vertical installation. 65 mm NB

SITC of Air Vessel Tank 300 NB x 1.2 mtrs.

SITC of Ball Valve

Providing and fixing 50 mm Ball Valve with complete with PN16 pressure Mtring, as per specification no. FF-VL/BV

Supplying and erecting 25 mm Ball Valve complete with PN16 pressure Mtring, as per specification no. FF-VL/BV

Supplying and erecting 20/25mm dia gun metal air release cock, with necessary G.I. coupling to be fitted on top of air vessel or on wet riser complete as per specification no. FF-FFA/ARV

Cabling from motor to Starter with copper earthling Strip within the pump house

Supplying and erecting 200 mm dia Cast Iron end line strainer of Y-type flanged end pattern, PN16 pressure Mtring, screen of SS end connection with Flanged / Screwed / Socket Weld / Butt Weld End etc with standard OAR (open area Mtrio) for positive suction complete as per specification no. FF-VL/ELS

Supplying and erecting 100 mm dia Cast Iron end line strainer of Y-type flanged end pattern, PN16 pressure Mtring, SS screen, end connection with Flanged / Screwed / Socket Weld / Butt Weld End etc with standard OAR (open area Mtrio) for positive suction complete as per specification no. FF-VL/ELS

SITC of MS ERW Black Pipe as Per IS : 3589 / 6.3mm thick & IS 1239 / II 'C' Class, with fittings IS 1239/II heavy grade including MS plate fabricated flange to ASA 150 LBS Mtring with accessories plus consumable for Underground pipes protection with by coating & wrapping with anticrrosive tape complete with required structural support if any as per spec

150 mm NB 'C' Class

100 mm NB 'C' Class

80 mm NB ‘C’ Class

SITC of MS ERW Black Pipe as Per IS : 3589 / 6.3mm thick Gr. Fe 410 & IS 1239 / I- 'C' Class, with Fittings to suiitable pipe Fabricated IS : 3589 / 6.3mm thick / IS : 1239 / II - Heavy Grade, including MS Plate Fabricated Flanges to IS / DIN / ASA 150 LBS Mtring & Above ground Pipe Protection (Painting)and all required 'supports etc.

150 mm NB 'C' Class

100 mm NB 'C' Class

80 mm NB ‘C’ Class

Butterfly Valve 150 mm dia with matching flange, nut & bolt etc. Make Marc/Turbo/ Normex /Equvt

SITC of oblique type stainless steel single headed hydrant valve with 63mm female instantaneous outlet angled towards ground as per IS 5290-Type A, including matching flanges ,bolts ,studs, nuts, washers, gaskets.

External

Internal

SITC of stainless steel body Orifice plate of suitable inner bore along with matching flange.

SITC of M. S. Hose Box of size 750 x 600 x 250mm-16swg thick fire red color from outside & white enamal from inside - front glass paited with " fire " with key, handle and brass hinges -to accommodate 2 nos of 15mtrs long hose and 1 branch pipe.

External

Internal

SITC of 63mm dia stainless steel universal branch pipe as per IS 2871

SITC of Fire fighting hose as per IS 14933 ( Type -A) . The fire hose shall be 15 mtrs long with 63mm dia stainless steel couplings at both end

15 m Long

SITC of GM air release valve .

Supplying and erecting 20/25mm dia gun metal air release cock, with necessary G.I. coupling to be fitted on top of air vessel or on wet riser complete as per specification no. FF-FFA/ARV

Supplying and installing wall mounting swinging hose reel drum fitted with 19 mm dia. 30m long high pressure polypropylene (Polyhose) alongwith necessary accessories complete as per specification no. FF-FFA/HV

Supplying and erecting 25 mm Ball Valve complete with PN16 pressure Mtring, as per specification no. FF-VL/BV

SITC of 150NB Four way Siamese Connection for hydrant network with 4 nos. of 63 mm instantaneous inlets in glass fronted wall box having inbuilt non return valve and 150mm BFV with fittings, nut, bolts & washers.

Supplying and erecting 150 mm dia cast iron double flange ball type NRV complete with PN16 pressure Mtring, as per specification no. FF-VL/NRV

Providing and laying cement concrete pipe of IS 458:2003 NP-2 class of 450mm diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete

SITC of M.S fabricated supports for cable trays of M.S sections (ISA/ISMC/ISMB/Plates/Flats etc.) welded to structure / clamped to sturucture / wall, using anchor bolts where required including G.I. hardware & painting with Two coats of Red oxide primer & 2 coats of enmel paint of approved shade. (colour As per Ex. Plant) (Fabrication & Erection to be quoted under erection under, supply include only steel supply.)

FIRE SPRINKLER SYSTEM

Supplying, erecting, testing and commissioning of Upright/ Pendent quartzoid bulb sprinkler, 15 mm (½") dia. NBCM Body chrome finished, 68º C fixed tempeMtrure Mtring with deflector disc of conventional construction complete as per specification no. FF-SPR./UP

SITC of SS Flexible Drop 1500mm/1200mm Length along with fitting materials.

SITC of MS ERW Black Pipe as Per IS : 3589 / 6.3mm thick Gr. Fe 410 & IS 1239 / I- 'C' Class, with Fittings to suiitable pipe Fabricated IS : 3589 / 6.3mm thick / IS : 1239 / II - Heavy Grade, including MS Plate Fabricated Flanges to IS / DIN / ASA 150 LBS Mtring & Aboveground Pipe Protection (Painting) and all required 'supports etc.

100 mm NB 'C' Class

80 mm NB ‘C’ Class

65 mm NB ‘C’ Class

40 mm NB ‘C’ Class

32 mm NB ‘C’ Class

25 mm NB ‘C’ Class

Supplying and erecting, testing and commissioning of 150 mm dia. installation control valve (Alarm Valve) of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch,cock valve complete with drain valve and bypass, test control box, ball valves, MS pipes of required size, flanges, orifice plate, gasket etc. complete as per specification no. FF-VL/ICV

Supplying and erecting 200 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure Mtring, as per specification no. FF-VL/BFV

Butterfly Valve 150 mm dia with matching flange, nut & bolt etc. Make Marc/Turbo/ Normex /Equvt

Supplying and erecting 100 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure Mtring, as per specification no. FF-VL/BFV

Supplying and erecting 75/80 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure Mtring, as per specification no. FFVL/BFV

SITC of Water flow switch of 80 mm

Supplying and erecting 25 mm Ball Valve complete with PN16 pressure Mtring, as per specification no. FF-VL/BV

SITC of Pressure Gauges with Syphon Tube and Cock 150mm Dial Range - 0 to 1kg /cm2.

FIRE EXTINGUISHER

Clean gas Agent ( NAF P IV )

Co2 type of Fire extinguisher of 4.5 Kg cap. complete ready for use as per IS 2171 having ISI Mark /Seasfire

Supply and installation of Ceiling mounted, self activated FE-36 type, 10 kgs capacity Fire Extinguisher with self spary sprinker, fixed with pressure discharge horn, wall brackets or floor MS support complete with necessary mounting base.

Providing and fixing fire bucket and stand as per site requirement or as per directed by engineer in charge.

Supply, installation, Testing & commissioning 9L K Type Fire extingusher ISI Mark or as per direction by Engineer In Charge

Supply, installation, Testing & commissioning of Evacation map A3 Size os per design & Drawing or as per direction by Engineer In Charge

Supply, installation, Testing & commissioning of autoglow Sinages os per design & Drawing or as per direction by Engineer In Charge

Supply, installation, Testing & commissioning of LED Fire exit sinages os per design & Drawing or as per direction by Engineer In Charge Make - Prolight or Equivalent

MULTIMEDIA SYSTEM

Providing & Fixing Multimedia System at Control Room :-

Videowall Display 55 inch IPS panel, 700 Nits, Bezel Width -0.88 mm (Bezel to Bezel), WebOS, SoC, HDMI, DP, DVI-D, RGB, Audio, USB, Seamless Large Screens with Extreme-Narrow Bezel, Higher / Wider Viewing Angel, Clear & Flawless Vision, Smart Calibration, Clear View with Non-glare Panel,Operation Hours 24x7 (LG Make Model No 55VH7F)

Providing & Fixing of Bracket LVW12-55T offers you an extremely easy installation experience you had never been through. With the creative scale design and connecting mounting slot, the mounts installation and alignment became reproducible. The LVW12-55T is not only easier to install; it offers the installer endless possibilities through their nearly seamless chainable design structure. Oversized displays and unique visual digital signage applications require mounts that won’t restrict the creative process. Made of quality steel, with pop-out extension arms provide a quick access and easy maintenance, the LVW12 Series has been designed for longevity and versatility. (lUMI Make Model No. LVW12-50T)

Providing & Fixing of Presentation Switcher •5x2 Conference Collaboration Switcher 2HDMI/1VGA/1 Type-C/Wireless Presentation With 2 USB Host •Multiview presentation with configurable screen layout. •BYOD receiver with Airplay Mirroring, Miracast and USB Dongle supported. •Supports USB extension and switching control among three USB hosts. •Input :- 1 x VGA;2 x HDMI; 1 x USB-C •Output:- 2 x HDMI Matrix •Plug and Play, free configuration, easy installation Dongle •Single Click displays host PC content on the Display (100-150ms latency) (Pixelfly Make Model No WPS42U+WDG)

Providing & Fixing HDMI Face Plate VTwo port HDMI & USB wall Plate - HDMI & USB female to female , coupler type - White (Logic Make Model No. 771726)

Providing & Fixing of Speaker •RMS Power :-60 W •Max. Power :-120 W •Sensitivity (1W/1m) :-90 dB •Ingress Protection rating :-IP3x •Frequency :-Range (-10 dB) 120 Hz - 20 kHz Response (± 3 dB) 150 Hz - 20 kHz Audec Make Model No. Kyra 6

Providing & Fixing Amplifier •RMS Power :- @ 8 Ω Bridge 300 W •Inputs :-Sensitivity (1W/1m) 0 dB (1V RMS) Impedance :-12 kΩ balanced Connector:- XLR female with Male Linkthrough •Signal / Noise :- > 90 dB •Protection :- DC Short circuit\Over heating\Over load\Signal limiting •Frequency :- Response (± 3 dB) 20 Hz - 20 kHz ( Audec Make Model No Epa 254)

Providing & Fixing Media Player X88 Pro® ‎Cortex A9 4K Media Player, 4GB Ram 32 GB ROM, RK3318 Quad Core Processor, H.265 Decoding, 2.4G/5.8GHZ Dual Wifi Supports, (MAVS-MP4K)

Providing & Fixing Signage License Cloud Managed Digital Signage License For 3 Yrs (Plus TV 3 Yrs)

Providing & Fixing HDMI Cable High Speed HDMI Cable With Ethernet Channel, HDMI Male to Male, Shielded, Black, 15 m (50 ft.) (Manhatten Make Model No 323260)

Providing & Fixing USB Active Cable, A Male to B Male, 15 m (50 ft.), Black (Manhatten Make Model No 152389)

Providing & Fixing Multiple Cables And Connectors For Videowall (Manhatten Make)

Providing & Fixing AV Rack Make Valrack Model No -6U

Installation Charges With Cable Dressing, Cable Labelling And Installation Of All The Equiprment As Per The Item Mention In BOW Other Than Any Civil Work

Programming Charges of Systems

Providing & Laying 2 Core x 1.5 Sqmm Copper Cable with 25 MM Conduit.

Supply, laying and commissioning Cat 6 UTP cable with accessories i.e.conduit pipe,clamp etc.

Supplying, installing, testing and commissioning of a consisting of modular , 2 nos of 6A 5-pin sockets and 1no 16A SP switch along with front plate. The rate should include supplying & interconnecting PVC insulated 2Rx2.5sq.mm copper FRLS conductor wires for phase &1Rx2.5sq.mm. for earthing copper FRLS conductor wires and suitable switch box for switch and sockets. The whole cluster shall be measured as one number. (Make- Legrand or Equivalent )

Description Same as Above Looping from Primary point. ( Consider As a Secondary Point) (Make- Legrand- or Equivalent )

Providing & Fixing of Queue Manager Stainless Steel Height 900mm Dia of Base 350mm Heavy Duty of Euronics Make.

SIGNAGES & LOGO

Entrance Gate Branding 3D Signage : Prototyping supply installation & commissioning letters made of 18 gauge thick S.S.316 material laser cut out with 75mm x 18 gauge thick side patti brazing for box type 3D Letters with backside S.S.Scrue brazing for fitting arrangment , front side attached 3mm thick 040 acrylic laser cutout letters with male female fitting .all letter polish & rose colour PU coated as per your requirment.Letter bottam side attached 5mm S.S. laser cut PU coated plate for fitting arrangment.All letter inside samsung moduler LED Light for glow.All inculisive of Transpot Labour mechanical cutting Drillding , Making holes etc completed

Entry Gate Logo : Prototyping supply installation & commissioning logo & letters made of 18 gauge thick S.S.316 material laser cut out with 40mm x 18 gauge thick side patti brazing for box type 3D Letters with backside S.S.Scrue brazing for fitting arrangment .& Logo fitted on 30"Ø S.S. Base plate with PU coating Colour as per artwork.All inculisive of Transpot Labour mechanical cutting Drillding , Making holes etc completed. Size: 36"Ø

Latter in English : Prototyping supply installation & commissioning logo & letters made of 18 gauge thick S.S.316 material laser cut out with 40mm x 18 gauge thick side patti brazing for box type 3D Letters with backside S.S.Scrue brazing for fitting arrangment .& Logo fitted on 30"Ø S.S. Base plate with PU coating Colour as per artwork.All inculisive of Transpot Labour mechanical cutting Drillding , Making holes etc completed. Latter Size: 4.4"

Latter in Marathi : Prototyping supply installation & commissioning logo & letters made of 18 gauge thick S.S.316 material laser cut out with 40mm x 18 gauge thick side patti brazing for box type 3D Letters with backside S.S.Scrue brazing for fitting arrangment .& Logo fitted on 30"Ø S.S. Base plate with PU coating Colour as per artwork.All inculisive of Transpot Labour mechanical cutting Drillding , Making holes etc completed. Latter Size: 6.25"

Entry Gate Logo: Prototyping supply installation & commissioning logo & letters made of 18 gauge thick S.S.316 material laser cut out with 40mm x 18 gauge thick side patti brazing for box type 3D Letters with backside S.S.Scrue brazing for fitting arrangment .& Logo fitted on 30"Ø S.S. Base plate with PU coating Colour as per artwork.All inculisive of Transpot Labour mechanical cutting Drillding , Making holes etc completed. Size: 60"Ø

Latter in Marathi : Prototyping supply installation & commissioning logo & letters made of 18 gauge thick S.S.316 material laser cut out with 40mm x 18 gauge thick side patti brazing for box type 3D Letters with backside S.S.Scrue brazing for fitting arrangment .& Logo fitted on 30"Ø S.S. Base plate with PU coating Colour as per artwork.All inculisive of Transpot Labour mechanical cutting Drillding , Making holes etc completed. Latter Size : 7.8"

Latter in English : Prototyping supply installation & commissioning logo & letters made of 18 gauge thick S.S.316 material laser cut out with 40mm x 18 gauge thick side patti brazing for box type 3D Letters with backside S.S.Scrue brazing for fitting arrangment .& Logo fitted on 30"Ø S.S. Base plate with PU coating Colour as per artwork.All inculisive of Transpot Labour mechanical cutting Drillding , Making holes etc completed. Latter Size : 7.6"

Parabolic Signage : Design, Manufacture,display,Installation of hanging type LED Illuminited sign/Direction board in Parabolic & Eliptical (half ,semi & full) shape.Aluminium Alloy (6063-T6) extruded Anodised profile use for outer & nylon bracket for internal structure holding & heatsinks fitting. The display sheet shall be of unbreakable 040 translucent polycarbonate sheet of 2mm/3mm thickness. The text/ Graphics matter visibility shall not be less than 160˚. The approved colour text and graphics shall be printed/router cut on monomeric calendered vinyl of 70μm thickness and shall be firmly pasted on display sheets. Provision for 24 x 24mm aluminium profile attachment for bottam hanging & top side Tie arrangment. .The signage shall have the integal mounting arrangments with strudy structural frame & ACP Cladding on the backside of signage to avoid rusting and entry of dust.The LED Board shall have25x 26mm heat sinks with multiangle attachment for LED & for nylon bracket. Uniform illumination with 4-8W/Sq.ft and with brightness more than ambient light. Suitable size end cap of 1.5mm thick S.S 304 should be provided.

Brass -Prototyping supply installation & commissioning single side nameplate Signages shall be made of 25mm thick pi shape extruded 6063 -T6 aluminium profile of 2mm wall thickness.two 3 mm internal ribs shall be provided for corner locking the profile shall Gold/ Sliver/ Black anodised 15micron dept.The display shall be 3mm thick aluminium sheet with PU Coated in black colour with aproved text in 4mm Brass cutout laser cut letter with gold plating & lacqur coating fittted on aluminium plate.The signage shall be provided wih trarded S.S.Stud welded at the backside of the wall mounting Rate Inclusive of Base plate & Hindi English Letters as Design & Directed by Architect

Advnace Modular Cabin Name plate Shall be made of hollow 19 ±1.0mm thick black anodised extruded aluminium frame & wall thickness of 1.7mm.The frame joining side cap shall be of moulded nylon -6 material . name plates (3" ,4" wide) shall be held together by a 9mm dumbell sleeve inserted in the circular grooves of the name plate.This assembly of name plates shall be inserted in the groove of the frame.The approved text will be computer cut on Gold coloured vinyl and pasted on the name plates as per the approved artwork.2mm thick clear acrylic plates shall be inserted in the grooves of name plates to protect the matter from dust & Vandalism.

ARCHITECTURE, DESIGNING & DRAWINGS