67 H(F)(W)/2023-24

Amount

Part A : For 33 kv & 11 KV Line The work of safe carriage of the following material with loading/unloading from store centre Darshan Nagar to site of work. (Approx. Distance 0 to 20 Km.)

ST Pole 11 Mtr. long (540 sp-52)

33 KV XLPE Cable 3x300 sq mm

33 KV Cable Jointing Kit Outdoor 3x300 sqmm

33 KV Cable Jointing Kit Staight Through 3x300 sqmm

11 KV XLPE Insulated Armoured Al. Cable of Size 3x185 sqmm

11 KV Cable Jointing Kit outdoor 3x185 sqmm

11 KV Cable Jointing Kit Staight Through 3x185 sqmm

Single Core XLPE Insulated Aluminium Cable 300 sqmm for Jumpring

Single Core XLPE Insulated Aluminium Cable 185 sqmm for Jumpring

Transformer 250 KVA 11/.4 KV

LT XLPE Cable Alluminum 1x400 sqmm

LT XLPE Cable Alluminum 3.5x400 sqmm

LT XLPE Cable Alluminum 3.5x240 sqmm

LT XLPE Cable Alluminum 3.5x150 sqmm

LT XLPE Cable Alluminum 4x25 sqmm

LT XLPE Cable Alluminum 4x16 sqmm

LT XLPE Cable Alluminum 2x10 sqmm

Distribution Pannel (A- Type)

Distribution Pannel (B- Type)

Distribution Pannel (C- Type)

Energy Meter Single Phase

Energy Meter Three Phase

Energy Meter Three Phase AMR Base

L.T. Staight Through 3.5x240 sqmm

L.T. Staight Through 3.5x150 sqmm

Other Line material i.e. cross arm / conductor / pin insulator / stay / earthing/cable Box etc. except A.B Cable.

Dragging of ST Pole as per RESPO Norms.

Fabrication and Erection of Double Pole Support on ST Pole including grouting with 1:4:8 ratio Cement, sand & Brick Ballast& including digging of pit and fixing of all accessories clamp & earthing as per RESPo Norms. (Cost of clamps borne by contractor)

Grouting and Binding of 11 KV Stay in 1:4:8 ratio with cement, sand and brick ballast including cost of all grouting materials as per RESSPO Norms

Earthing of Poles by Ms Earthing rod of 20x2500 mm and 6 swg earthing wire etc.as per RESPO Norms

Construction of Plinth of Transformer Size 2x2x2.5 Mtr including excavation of foundation, base concreting of 1:6:12 (Cement mortar of Ratio 1:4 foundation, CC in 1:4:8 ratio (Cement fine sand and brick ballast ) and RCC work with ratio 1:2:4 Cement, Coarse sand and Stone Grit of 20 mm gause as per RESSPO norms

Fencing of Transformer Plinth with the help of wire mesh/Barbed wire after grouting proper size of angle as per RESSPO Norms. Inclusive of all material such as Wiremesh/Barbed Wire, Angle Flats, Nut Bolts etc.

Chemical Pipe for Earthing (all the material will be supplied by the contractor.)

Earthing by way of boring and lowering of "B" class G.I. pipe 50 mm dia 20 mtr. Long from ground upto the water lavel it will be connected to the G.S. Strip for T/F nutral connection the earth strip will be welded to the G.I. pipe the work also included top cap and clamps for pouring water the cost of all material will all labour and T n P etc. complete in all respect . (all the material will be supplied by the contractor.)

Laying of 33 KV XLPE Cable 3x300 sqmm in Trunch/Duct

Laying of 11 KV XLPE Cable 3x185 sqmm in Trunch/Duct

Installation of Heat Shrinkable Type cable jointing kits Outdoor end Termination suitable for 33 KV XLPE cable 3x300 mm2 confirming to IS ESI-09-13-IS-13573 of 1992 amendment I&II VDE-0278 of latest version there of if any. ( Jointing Kit supplied by Dept.)

Installation of Heat Shrinkable Type cable jointing kits Staight Through end Termination suitable for 33 KV XLPE cable 3x300 mm2 confirming to IS ESI-09-13-IS-13573 of 1992 amendment I&II VDE-0278 of latest version there of if any. ( Jointing Kit supplied by Dept.)

Installation of Heat Shrinkable Type cable jointing kits outdoor end Termination suitable for 11 KV XLPE cable 3x185 mm2 confirming to IS ESI-09-13-IS-13573 of 1992 amendment I&II VDE-0278 of latest version there of if any. ( Jointing Kit supplied by Dept.)

Installation of Heat Shrinkable Type cable jointing kits Staight Through end Termination suitable for 11 KV XLPE cable 3x185 mm2 confirming to IS ESI-09-13-IS-13573 of 1992 amendment I&II VDE-0278 of latest version there of if any. ( Jointing Kit supplied by Dept.)

Mounting of 250 KVA Transformer as per RESSPO Norms.

Shifting Erection and Commission 25-100 KVA old DTR on DP

Shifting,Erection and comissioning of Existing A-panel with pre cast and other

Shifting,Erection and comissioning of Existing B-panel with pre cast and other

Laying of LT XLPE Cable Alluminum 1x400 sqmm as per RESSPO Norms.

Laying of LT XLPE Cable Alluminum 3.5x400 sqmm as per RESSPO Norms.

Laying of LT XLPE Cable Alluminum 3.5x240 sqmm as per RESSPO Norms.

Laying of LT XLPE Cable Alluminum 3.5x150 sqmm as per RESSPO Norms.

Laying of LT XLPE Cable Alluminum 4x25 sqmm as per RESSPO Norms.

Laying of LT XLPE Cable Alluminum 4x16 sqmm as per RESSPO Norms.

Laying of LT XLPE Cable Alluminum 2x10 sqmm as per RESSPO Norms.

Installation of Distribution Pannel (A- Type)

Installation of Distribution Pannel (B- Type)

Installation of Distribution Pannel (C- Type)

Installation of Energy Meter Single Phase

Installation of Energy Meter Three Phase

Installation of Energy Meter Three Phase AMR Base

Installation of L.T. Staight Through 3.5x240 sqmm

Installation of L.T. Staight Through 3.5x150 sqmm

Supply and Laying of G.I. Pipe 6'' dia with Clamp and Nut Bolt

Supply and Laying of PVC PIPE 2 INCH DIA WITH DIFFERENT TYPES BANDS AND ALL OTHER ACCESSORIES

Supply and Laying of PVC PIPE 2.5 INCH DIA WITH DIFFERENT TYPES BANDS AND ALL OTHER ACCESSORIES

Supply and Laying of HDPE Pipe (as Per Cable Size)

Supply of Gland 63 mm

Supply of Gland 50 mm

Supply of Gland 25 mm

Supply of Gland 28 mm

Supply of Pre Cost of Pannel Base

Dismantling of old 33 KV line

Dismantling of old 11 KV line

Dismantling of old 415 V line

Part B : Temporery Shifting Work & Emergency work The work of safe carriage of the following material with loading/unloading from store centre Darshan Nagar to site of work. (Approx. Distance 0 to 20 Km.)

S.T. Pole 11 Mtr. long

ACSR Weasel Conductor

11 KV Cable Jointing Kit Outdoor 3x185 sqmm

33 KV Cable Jointing Kit Staight Through 3x185 sqmm

33 KV Staight Through Cable Jointing Kit 3x300 sqmm

Dragging of ST Pole as per RESPO Norms.

Fabrication and Erection of Single Pole Support on ST Pole including grouting with 1:4:8 ratio Cement, sand & Brick Ballast& including digging of pit and fixing of all accessories clamp & earthing as per RESPo Norms. (Cost of clamps borne by contractor)

Installation of Heat Shrinkable Type cable jointing kits outdoor end Termination suitable for 11 KV XLPE cable 3x185 mm2 confirming to IS ESI-09-13-IS-13573 of 1992 amendment I&II VDE-0278 of latest version there of if any. ( Jointing Kit supplied by Dept.)

Installation of Heat Shrinkable Type cable jointing kits Staight Through end Termination suitable for 33 KV XLPE cable 3x185 mm2 confirming to IS ESI-09-13-IS-13573 of 1992 amendment I&II VDE-0278 of latest version there of if any. ( Jointing Kit supplied by Dept.)

Installation of Heat Shrinkable Type cable jointing kits Staight Through end Termination suitable for 33 KV XLPE cable 3x300 mm2 confirming to IS ESI-09-13-IS-13573 of 1992 amendment I&II VDE-0278 of latest version there of if any. ( Jointing Kit supplied by Dept.)

M/s S.K. Construction

Hindustan Electric Work