PROVN OF GERMAN GREASE TRAP AT DSC MESS, PIGEON HOLES AT ARMOURY, SIGN POSTINGS, STAIRCASE BEHIND P-158, AC DUCTING AND ALLIED WORK IN T-48 AT 24 ED AF STN MANAURI

Amount

Demolition of RCC of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Dismantling of AC (corrugated/semi corrugated) sheet/PGI/CGI in roof covering including ridges complete all as specified and directed.

Fixing only old Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws and making good to disturb surface, complete all as specified and directed.

S&F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws and making good to disturb surface, complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth in hard/dense soil; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and directed.

M&L PCC (1:3:6) type C-2 using 40mm aggegate as in foundations, filling and mass concrete complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers,soil not exc 25 cm.complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, in shoft loose soil getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed.

M&L cutting holes in brick walls in built in cement mortar or cement lime mortar and stone walls built in lime mortar complete all as specified and directed.

M&L for PCC type B-1 (1:2:4) 20 mm graded aggregate as in concrete for fixing holdfasts for bed blocks etc ccomplete all as specified and directed.

S&F rolled mild steel Fe-410- W(Gde- E-250) quality A in stairs (framed) including stringers, treades, landing, balusters, hand rails etc. Ncluding cleats, brackets, etc. ccomplete all as specified and directed.

M & L for preparation of new Steel surface of any description over 10 cm width or girth and apply two coats of synthetic enamel paint over a coat red oxide primer etc complete all as specified and directed.

Taking down eaves gutters, rain water pipes (any size or pattern) including all fittings, heads, shoes, bends, swan-necks etc including cleaning or refixing or removal to stores complete all as specified and directed.

S & F 110mm PVC SWR pipes single socketed in any length laid in trenches or in floor & walls complete all as specified and directed.

M&L brick work with sub class 'B' bricks(old size bricks) straight or curved on plan exceeding 6 mtr mean radius built in cement mortar 1 : 4 and external face of brick work pointed flush in the same mortar as the work proceeds, complete all as specified and directed.

M&L rendering 15 mm thick in cement mortar 1:4 on fair faces of brick or concrete surfaces finished even and fair complete all as specified and directed.

M&L preparation of new surface and applying two coats of cement based paint over a coat of primer complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15cm thickness complete all as specified and directed.

M&L for PCC1:4:8 type D-2 using 40mm graded stone aggregate , as in foundation,filling & mass concrete as in sub base to floor etc complete all as specified and directed.

M&L for providing 100mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in floor, finished even and smooth without using extra cement complete all as specified and directed.

M&L RCC type B0 1:2:4 (12.5mm graded aggregate) for fins, fascias, louvres, parapets,and railings exc. 60cm in height, newels, balustrade,shelves, pigeon holes and the like, complete all as specified and directed.

M&L TMT bars 6mm to 8mm dia. cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

Use & waste form work side and soffits to fins, louvers, fascia & like for fair finishes surface of concrete complete all as specified and directed.

M&L two coat of OBD over one coat of primer, complete all as specified and directed.

M&L 2 mm thick wall care putty over plaster surface of wall to prepare the surface even and smooth complete all as specified and directed.

M&L 10 mm thik rendering in cement mortar (1:4) on fair and even of brick work or concrete surfaces,include for finishing the surface fair and even, complete all as specified and directed.

M&L Forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete all as specified and directed.

Taking down steel window Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m but with shutters (without taking off shutters from the frame) complete all as specified and directed.

S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed.

S&F 3 mm sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.

S&F fly proofing stainless steel wire cloth.0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples include for fixing with beads supplied with joinery,ccomplete all as specified and directed.

M&L cutting openings through brick walls in cement mortar for door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc.. to store and rubbish not exceed 50 m and making good plastering around finished opening complete all as specified and directed.

M&L roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and directed.

M&L Machine cut kota stone flooring 20-25mm thick of size (550 x 550)mm over 20 mm thik cement screed (1:4) bed or bedding layer laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Demolition of PCC in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for 75 mm thick cement concrete type C-2, (1:3:6) using 20 mm graded stone aggregate in plinth protection etc. complete all as specified and directed.

Supply and fixing kessal grease separators NS1under ground Art No.93001/80 B,HSN code -84212190 ,including excavation in any type of soil, foundation in PCC 1:3:6, including connection to existing sewer line/septic tank/soakage well as manufacturer instructions ,also surface making good to finih and site clearance also complete all as specified and directed. (Note:-Drawings and Specifications are held this office pl)

M&L for PCC1:2:4 type B-0 using 12.5mm graded stone aggregate , as in copping etc complete all as specified and directed.

M&L providing pre-cast RCC covers 1:2:4 type B-1 using 20mm graded stone aggregate as in cover, slabs set in CM 1:4 including necessary form work complete all as specified and directed. ( Reinforced measured separately)

S&F High strength Mild steel TMT Bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally and binding with and including mild steel wire (annealed) not less than 0.9mm dia.complete all as specified and directed.

Supply and fixing ,testing A Grade acrylic 3D letters each Letter size/height 0.45mtr(18 inch) including 2 Nos of Logos (design and colour approved by Engr-in-charge) with Samsung LED stip light(module type) including FRLSH copper cable 1.50 Sqmm to electric supply as per requirement with 5 Amp switch socket & including installation etc ccomplete all as specified and directed. Note : 1. Drawings and Specifications are held this office pl. 2. Matter will be provide by this office.

Supply, fabrication, installation and testing of sheet metal ducts galvanized sheet steel in accordance with the approved shop drawing and as sper specifications, Note : 1. All ducts shall be rigid and shall be supported from ceiling /slab by MS rods of 8mm (3/8") dia with MS angle at the bottom. 2. The rod shall be anchored to RC slab using anchor / dash fasteners. 3. A rubber gasket of 5 mm thinckness shall be provided between duct and angle to avoid metal to metal conttact and vibration. 4. Doubts nuts will provided under angle supports. The hanger spacing for duct supporting shall be not more than 2 meter. wheree ducts touches with wall or ceiling or beams oe column or floor a rubber gasket of 5 mm thickness shall be provided between them. all flanges, bracing and supports are to be mild steel and are to be essentially given a coat of red oxide primer . Note : Quoted rates shall be deemed to included cost of making necessary cutting / holes in false ceiling / support system including making good necessary repair after installation of duct network.

All as per item No. 43.00 above but 22 Gauge

All as per item No. 43.00 above but 24 Gauge

Supply installation and testing and commissioning of acoustic lining of duct work with 10 mm thick open cell nitrile rubber complete all specified and directed.

Supply installation and testing and commissioning of duct thermal insulation fire retardant, selfixtinugishing type XLPE / nitrile rubber insulation for ducts with density not less than 24 Kg / Sqm 'K' valve not more than 0.02 Kcal/ degC with adhesive tape etc with 09 mm thick complete all as specified and directed.

Supply, installation and testing and commisioning Jet nozzele for supply air (275 dia) complete all as specified and directed.

Supply installation and testing and commissioing of fire retardent canvas connection for ductable AC complete all as specified and directed.

Note :- (i) Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material. The contract amount shall be arrived at after deduction of Schedule of Credit from the total quoted amount in BOQ. (ii) Make of material shall be as per mentioned in Particular specifications or Appendix 'B' to Particular specifications as approved by AGE (I) AF manauri

Mohit Enterprises (BID ID -3173223)

M/S SHIV BALLABH MISHRA (BID ID -3173213)

RK Enterprises (BID ID -3173204)

R K GUPTA AND SONS (BID ID -3173890)

gangotri enteriprises (BID ID -3172996)

M A TRADERS (BID ID -3179150)

M/S Amar Enterprises (BID ID -3173270)