ADDN /ALTN TO OFFICER INSTITUTE (P-12) AND SHAKUNTALAM AT AF STN KALAIKUNDA

Amount

Demolition concrete (unreinforced) in ground floors and pavings n.exc 15 cm thickness (below or above ground level)

Taking down chowkats or frames with shutters not exceeding 1.5 Sqm without taking off shutters from the frames.

Taking down chowkats or frames with shutters exceeding 1.5 Sqm but not exc 4 sqm each without taking off shutters from the frames.

Taking up or down steel tubing 15mm bore of pipe and connections, complete all as specified and directed.

Taking up or down steel tubing 20mm bore of pipe and connections, complete all as specified and directed.

S&F steel tubes, 15mm bore medium grade, galvanised with all fittings ISI marked and fixed concealed type complete to walls and ceilings or laid in floors, complete all as specified and directed.

S&F in steel tubes, 20 mm bore medium grade, galvanised with all fittings ISI marked concealed type and fixed complete to walls and ceilings or laid in floors, complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. complete all as specified and as directed.

M&L brick work with fly ash old size bricks, stright or curved on plan exc 6 m mean radius built in CM 1:6 , complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls or from concrete surface incl recking out joints hacking for key scrubbing with water etc, complete all as specified and directed.

M&L rendering 15mm thick in CM 1:6 on fair face of brick work surfaces finished even and smooth with out using extra cement, complete all as specified and directed.

M&L rendering 15mm thick in CM 1:4 on fair face of brick work surfaces finished even and smooth with out using extra, complete all as specified and directed.

M&L rendering 5 mm thick in CM 1:3 on fair face of concrete surfaces as in ceiling, chajja, shelves etc finished even and smooth without using extra cement, complete all as specified and directed.

M&L preparing newly plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and directed.

M&L application of two coat weather coat paint over a coat of primer to new wall surfaces including preparation of surfaces, complete all as specified and directed.

M&L application of distemper oil emusion two coats over 3 mm thick wall care putty including preparation of new surfaces.

M&L texture paint over 1.5 mm thick wall care putty including preparation of old wall surfaces complete removal of existing, complete all as specified and directed.

M&L distemper oil emusion two coats over 3 mm thick wall care putty including preparation of old wall surfaces complete removal of existing, complete all as specified and directed.

M&L preparation of old decorated plastered or unplastered surface of ceiling And applying one coat of white wash, complete all as specified and directed.

M&L applying two coats of external acrylic emulsion paint including priming coat of exterior primer over old surfaces with and including 2mm thick external putty finished including prepration and complete removal of existing treatment, complete all as specified and directed.

M&L 50 mm thick cement Concrete type C-2, 1:3:6 (using 40mm graded stone aggregate) as in plinth protection complete all as specified and as directed.

M&L machine cut kota stone slab (Single Piece in tread) as in flooring 20 to25 mm thick in floor including screed bed 15mm thick or bedding layer for laying floor finishes CM 1:4 etc set and jointed in neat cement slurry and jointed with greay cement slurry mixed pigment to match shade of slab incl rubbing and polishing, complete all as specified and directed.

M&L machine cut kota stone slab (Single Piece) as in flooring 20 to 25 mm thick riser of steps, skirting, dado and pillar laid over including 10mm thick rendering in CM 1:4, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding( but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L vitrified ceramic light shade tiles 7/8 mm thick (square/ rectangular) polished, area of each tiles not exceeding 600x1200 mm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of cement mortar 1:4, 15 mm thick etc, complete all as specified and directed.

All as per item No-25.00 above, but in skirting / dado with 10mm thick screed bed 1:3 cement plaster, complete all as specified and directed.

M&L non - skid ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match 20mm thick screed bed or bedding layer for laying floor finishes in CM 1:6 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match.

M&L glazed coloured ceramic tiles in vertical surfaces 600x1200x7, 600x600x7mm thick set joint in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer in cement mortar 1:4 10mm thick for laying dado/skirting tiles etc, complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, fixing in opening as per specification & drawing etc, complete all as specified and directed.

S&F factory made solid PVC moulded door shutter,with particle board core 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing etc, complete all as specified and directed.

S&F SS butt hinges, heavy weight cold rolled 100 mm size.

S&F aluminium bow handle cast type anidised 150 mm size.

S&F stainless steel semi barrel tower bolts, stove enamelled black, with bright boltand fixed of length of bolt 75 mm size.

M&L wooden fillet design on wall in rooms and corridor, complete all as specified and directed.

M&L pop design in corner in hall room corridor, complete all as specified and directed.

Cutting holes in brick walls n.exc half brick built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required (depth of embedded portion measured from the face of the jamb into the wall)

S&F framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and directed.

M&L two coats of synthetic enamel paint to new steel surfaces previously untreated including preparation of new surfaces over a coat oxide primer, complete all as specified and directed.

M&L preparation of old painted surfaces and applying one coat of synthetic enamel paint on wooden surfaces of any description not other wise described over 10 cm width or grith etc complete all as specifed and as directed.

M&L preparation of old painted surfaces and applying one coat of synthetic enamel paint on steel surfaces of any description not exc 10 cm width or grith etc, complete all as specifed and as directed.

M&L in repairs, harrison rails, anodised aluminium alloy, chromium plated with fixing brackets, stops, rollers etc, complete all as specified and directed.

S&F in repair bib tap cast copper alloy with crutch or butterfly handle, chromium plated fancy type screwed for iron pipe, suitable for 15mm bore, complete all as specified and directed.

Dismantling water tank 1000 ltr and removing from site, complete all as specified and as directed.

S&F 1000 ltr rotaional moulded polyethylene water storage tanks cylindrical vertical with closed top hoisted and fixed in position, complete all as specified and directed.

S&F PVC ball valve 20mm dia high pressure of PTMT with aluminium rod & high density plastic ball screwed for iron pipe, complete all as specified and directed.

S&F in repair stop valve cast copper chromium plated concealed type screwed down, high pressure with long shank and cup suitable for 15 mm bore, complete all as specified and directed.

S&F in repair below counter top 555 x 450 x 205 mm white basin of Make-parryware Cat part No-C0407 or its equivalent in Jaguar, Hindware, complete all as specified and directed.

S&F 15mm dia pillar taps, cast copper alloy, Make - parryware Cat part No-T7184A Hawk E Tap-Dc for iron pipe and fixed, complete all as specified and directed.

M&L 20 mm thick Granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, steps in riser/tread ,window- cills, cooking platforms, working table and like over 20 mm thick screed bed or bedding layer in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite

M&L Machine cut cudappah stone slab 30-35mm thick on vertical surfaces jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and fixing in side wall and floor with making 50mm groves and adhisive araldite joints to provided on joining horizontal cudappah stone complete all as specified and directed.

M&L Machine cut cudappah stone slab 30-35mm thick on horizontal surfaces jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and fixing in side wall with making 50mm groves complete

S&F in repairs, brass chromium plated tubular towel rail 20mm dia complete all as specified and directed.

S&F brass Chromium plated shower roses 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.

S&F in repairs for vitreous china wash down water closet pan of padestel pattern white with P or S trap including , seat cover etc complete all as specified.

S&F in repair 10 ltr capacity PVC valveless syphonic action type flushing cistern, low level, white , with inlet ball valve float and handle including brackets including flush pipe of polythylene of 32 mm dia for low level cistern, complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 600 mm, complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description in any position complete all as specified and directed

M&L PCC 1:2:4 type B-1 using 20mm graded aggregate as in hold fasts, benching, coping, repair to chajjas, facia etc in window cills projecting type and similar work all as specified and as directed. Note : Necessary form work be included in the unit rate of this item.

M&L cutting out cracks to V section in existing roof or terracing cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand @ 1:1 (by weight).

M&L PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in padding concrete to maintain slope complete all as specified.

M&L 15 mm thick cement plaster in CM (1:4) mixed with water proofing compound as per manufacturer instructions over while the padding concrete is still green complete all as specified and as directed. Note : WPC shall be measured & paid separately under relevent items.

M&L Water proofing treatment on "non accessible" surface (Horizontal & Vertical surfaces) in following sequence through manufacturer / authorized applicator of the manufacturer including taking down of existing roof treatment with old PCC padding and plastering, properly cleaning & drying the concrete surfaces including removing debbries out of MOD land complete in following steps :-

Priming surfaces and applying one coat of hot blown bituminous 80/20 in two layer primer

Applying APP based polymeric membrane minimum weighing 3.5 kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) laid on primed surface by torch application including two coat of aluminium paint on top complete all as specified.

Supply only integral water proofing liquid compound.

S&F Anodised aluminium fixed partition powder coated , fixed type without sash bar, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws ,stainless steel wire cloth etc. complete all as specified and directed

S&F in repairs matallic door seal (Snake guard) suitable for 900-1200mm width door opening with Aluminium frame powder coated, complete all as specified and directed.

S&F in repair stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.

S&F in repairs, 4 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5 Sqm in each pane complete all as specified and directed.

M&L Chequered cement concrete tiles 30 cm x 30cm x 22mm thick, machine pressed; polished tiles with grey pigment Cement set jointed and pointed in neat cement slurry in floors,and cut and polised over and including screed bed 20 mm thick in cm 1:6 complete all as specified and as directed

M&L, 60 mm thick M-35 Grade , machine pressed precast conctete interlocking paver block with grey cement and pigment , of approved shape and size confirming to IS 15658-2006, laid dry over sand cushion including demolition of existing pcc/ paver block complete all as specified and as directed. Note:-Sand cushion will be measured and paid seperately.

M&L Sand filling under floors or in foundations including watering and ramming as per specified and directed

M&L 100mm thick PCC (1:2:4) type B-2 using 40 mm graded stone aggregate as in floor/hardstanding/ Path/plinth etc complete all as specified and as directed.

S&F factory made UPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately)

S&F factory made UPVC white colour Two track four panels sliding glazed door made of (big series) frame 67 x 50 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. comprising of uPVC multi-chambered frame, with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension uPVC extruded glazing beads, uPVC extruded interlock and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.l fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately)

S&F stainless steelwire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.

S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 Sqm in each pane complete all as specified and directed.

S&F centrifugal mono block pump of 1 HP capacity single phase 5.4 lps discharge automatic air release high efficiency suitable for 50x40mm pipe size complete all as specified & directed .make - kirloskar ,model no.- KDS 116

S&F water curtain of area confirming approx. 12sqm with different size of glass panel of req. shape and size & instalation with necessary lighting arrangement water supply & storage facility for curtain, complete all as specified and directed.

Surface excavation in soft soil n exc 30 cm deep and averaging 15 cm deep and getting out complete all as specified and directed.

Excavation in trenches n.exc 1.5 m wide & n.exc 1.5 m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc n.exc 10 Sqm on plan and n.exc 1.5 m in depth and getting out in soft/loose soil as specified & as directed

M&L Cement concrete in foundations, filling and mass concrete (PCC) type D-2 1:4:8 (40 mm graded aggregate) etc complete all as specified & as directed

M&L rough and flat form work to sides of concrete foundations, footing bases of columns, raft and raft beams, sides and soffits(if any) of foundation and plinth beams and similar work, veritical or to batter, complete all as specified and directed.

M&L RCC M-25 (Desigh mix) (20mm graded stone aggregate) for foundation including rafts, footings, foundation beams, plinth beams, bases for columns, etc, complete all as specified and directed.

M&L form work to sides of pillars posts, struts piers, columns & stanchions square rectangular or polygonal rough finished surfaces in shape, complete all as specified and directed.

M&L RCC M-25 (Design mix) (20mm graded aggregate) for columns, pillars, pierrs, posts & struts etc, complete all as specified and directed.

M&L flat form work to sides and soffits of floors or roof beams haunching, girders bressumers lintel cantilevers shelves including supports, overhangs etc also splays between floors and beams etc, complete all as specified and directed.

M&L RCC Design Mix M-25 (20mm graded aggregate) for beams cantilevers bressumers, lintels over 1.5m span etc, complete all as specified and directed.

M&L flat rough finished surfaces Form work to soffits of suspended slab such as roof slabs, floors slabs, landing & similar work not exceeding 200 mm thick (Horizontal or sloping) etc, complete all as specified and directed.

M&L filling soil under plinth of good earth, spreading in layers n exc 30 cm thick watering, ramming/rolling and finishing to required size, shape etc, n exc. 1.5 m high from base with soils complete all as specified and directed. (Note : earth filling obtained from item no 82.00)

M&L mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for colomns hocking ends and binding with and including mild steel wire (annealed not less than 0.9 mm dia or securing with clips quality conforming to complete all as specified.

M&L mild steel TMT bars 6mm to 8mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for colomns hocking ends and binding with and including mild steel wire (annealed not less than 0.9 mm dia or securing with clips quality conforming to complete all as specified.

M&L mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spaces and binders, cut to length, bent to shape required including cranking, bending spirally for hooping for colomns hocking ends and binding with and including mild steel wire (annealed not less than 0.9 mm dia or securing with clips quality conforming to, complete all as specified and directed.

M&L RCC Design mix M-25 (20mm graded aggregate) for slab supported on walls, beams and columns in floors, roofs, landings balconies canopies, deck slab and in shelves and the like etc, complete all as specified and directed.

M&L form work to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls etc rough finished surfaces of concrete flats.

M&F form work to rough finished surfaces of concrete of chullah hoods, chajjas, troughs and similar items including edges as specified and directed.

M&L RCC design mix M-25 (20mm graded aggregate) as in chajjas, complete all as specified and directed.

M&L treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) area complete all specified and directed.

M&L treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface area complete all specified and directed.

M&L treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all specified and directed.

M&L Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all specified and directed.

M&L brick work with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4., complete all as specified and directed.

M&L brick work with fly ash sub class ‘B’ old size bricks, straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed.

M&L rendering 15mm thick 1:6 on surfaces other than fair faces of brick work or concrete surface finsihed even and smooth without using extra cement. Complete all as specified and directed.

M&L rendering 15 mm thick in cement mortar (1:4) on other than fair faces of brick or concrete surfaces (5mm thick CM 1:4 with WPC setting coat and 10mm thick CM 1:4 backing coat), finished even & smooth without using extra cement all as specified and directed by Engineer-in-Charge. Note :- WPC measured and paid separetely.

M&L preparation of newly plastered surface of wall and applying two coat of oil emulsion distemper (white or tinned) over chalk whiting complete all as specified and directed.

M&L applying two coats cement base paint on wall including preparing new plastered surface including alkali resistant primer

M&L, broken stone or boulder hardcore of guage n exc 63 mm, deposited, spread and levelled in layers not exc 15 cm thick , watered and rammed to a true surface etc, complete all as specified and directed.

M&L cement concrete 1:4:8, type D-2(40mm graded stone aggregate) as in 75mm thick sub base of floor all as specified and directed.

M&L cement concrete type B-0, 1:2:4 (12.5 mm graded aggregate) 25mm thick as in bedding layer for laying floor tiles.

M&L non skid coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 15mm thick screed bed in CM 1:6, complete all as specified and directed.

M&L glazed ceramic coloured tiles of size 300x200x7 mm thick set and jointed in neat cement slurry and jointed in coloured cement as in vertical surfaces such as dado/skirting and facea of side bldg over & including 10mm thick rendering in CM (1:4) complete all as specified and as directed.

S&F Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined to-gether with solvent cement as per specification.

S&F Aluminium, anodised, barrel tower bolts of extruded section of 150 mm long and fixed as specified and as directed.

M&L PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) for fixing of hold fast/filling pressed steel door frame including necessary form work complete all as specified and directed.

S&F 100mm long butt hinges, medium weight, cold rolled stainless steel, and fixed complete all as specified and directed.

S&F 150 mm aluminium handle cast type, anodised complete all as specified and as directed.

M&L preparation of roof surface and applying a coat of hot bitumenous primer @ 0.40 Kg/sqm and applying a coat of industrial bitumen 85/25 grade @ 1.20 Kg/sqm, supplying and laying water proofing treatment with using polymeric water proofing membrane (weight not less than 3.5 kg/sqm) 3mm thick consisting 100 micron HMHDPE film centre core including applying one coat of industrial bitumen grade 82/25 @ 1.20 Kg/Sqm on top surface of membrane and torch application of membrane with 100mm overlaps at side and end lap where required and finally finished with and including a coat of aluminium paint @ 0.20 ltr/sqm as per manufacture instruction complete all as specified and directed.

M&L precast cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in precast cover slabs (for manholes etc) including all use of forms moulds or machine moulds and setting the blocks, slabs etc in cement mortar 1:6 mplete all as specified and directed (Reinforcement shall be measured and paid separately under respective item of this schedule)

M&L PCC (1:3:6) Type C-1 as in plinth protection 75mm thick finished even and smooth without using extra cement all as specified and directedd.

S&F bib taps cast copper alloy 15mm size, crutch or butterfly handle, screwed down, screwe for iron pipe chromium plated.

S&F of 15mm pillar taps of cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and flyne's screwed for iron pipe and fixed as directed.

S&F vitreous China urinal bowl type complete including providing and fixing plugs bedding urinal against wall 1:2 cement mortar ,with spreader and coupling, complete all as specified and directed.

S&F of vitreous china wash basin white, flat, back, size 550x400mm excluding tap waste but including brackets and including cutting for and pinioning in ends of brackets but exclusive of supply wate pipe all as specified.

S&F of 15mm bore of dia concealed stop cock cast copper alloy screwed down high pressure, with cruch or butterfly handle, screwed both ends for iron pipe all as specified and directed.

S&F PVC connection 15mm bore length not less than 600 mg long with both ends PTMT nuts complete all as specified.

S&F angle cock 15mm bore chromium plated fancy type screwed down high pressure with crutch or butterfly handles screwed both ends for iron pipe or for union and fixed complete all as specified and directed.

S&F of vitreous wash down water closet pan (padestal pattern) (excluding flushing cistern and flush pipe) including connection to drain or out going pipe and flush pipe anti syphonize pipe etc complete all as specified and directed.

S&F steel ventilator with top hung shutter including hinges steel peg stay completed

S&F Rotational moulded polythylene water storage tanks 500 Ltr Capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified

S&F 10 ltrs PVC valveless syphonic action type flushing cistern low level white, with inlet ball valve, float and handle including bracket with 32 mm dia PVC pipe 600 mm long complete all as specified and as directed.

S&F 20mm bore Gun-metal globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed.

S&F 600mmx450mm bevelled adges mirror consisting of 5.5mm thick commercial plywood and fixed to plug with chromium plated brass screwed and cup washer.

S&F towel rail 450mm long of PTMT fixed with and including chromium plated brass screw and wooden /plastic cleats(min wt 170 gms)

S&F shelf of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats(min wt 300 gms) complete all as specified

S&F 125mm grating doom with waste hole of PTMT (min wt 40gms), complete all as specified and directed.

S&F 32 mm dia waste coupling of PTMT (half or full threaded) (min wt 42-45 gms), complete all as specified and directed.

Cutting chases for GI consealed water tubing and making good with cement sand mortar 1:3 cutting n.exc. 10cm girth, complete all as specified and directed.

S&F 15mm bore GI water tubing medium grade galvanished with all fitting and fixed complete to walls and ceiling or laid in floor .

S&F 20mm bore GI water tubing medium gared galvanished with all litting and fixed complete to walls and ceiling or laid in floor

S&F cast iron nahani trap with grating including jointing to waste pipe fixed in cement concete type B-1 (1:2:4) of 75mm bore complete all as specified

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches

S&F 110 mm bore PVC (SWR)vent cowl

S&F 75 mm bore PVC (SWR) pipes of single socketed in any length with rubber ring joints laid in trenches or in floor all as specified

S&F 75mm dia PVC (SWR) floor trap plain with grating incl jointing with solvent cement, complete all as specified and directed.

M&L PVC (SWR) gully trap 125x110 mm setting in jointing with solvent cement all as specified and directed

S&F 100mm dia stack clamp out of 50mmx5mm flat iron and 16 mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roof.

S&F 110mm bore PVC (SWR) bends with oval acces door all as specified

S&F 75mm bore PVC (SWR) bends with oval acces door all as specified

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc for taking credit ( credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed.

M&L point wiring complete for one power point for one metal plug & socket for AC or one socket for geyser point on independent board with 4.0 Sqmm multistranded copper conductor single core PVC insulated unsheathed FR-LS cable 1100 volts grade (ISI marked) with proper colour coding drawn through and including non-metallic rigid PVC medium grade conduit not less that 20mm dia and conduit accessories (ISI marked) concealed in wall/fixed to roof, ceiling etc including provision of 4.0 Sqmm PVC insulated multistranded unsheathed copper conductor cable FR-LS (ISI marked) as earth continuity conductor connected to common earth dolly, including cutting chases of existing wall for conduits and fixing for Metal Plug and socket boxes and making good to the disturbed surface of wall/floor and matching with existing specifications. Connections of cable with MCBs or bus bar shall be done through proper size copper/brass thimbles.

M&L point wiring with 1.5 sqmm single core PVC insulated unsheathed FR-LS cable 1100 volts grade (ISI marked) with multistranded copper conductor with proper colour coding drawn through and including non-metallic rigid PVC medium grade conduit and conduit accessories (ISI Marked) concealed in wall/fixed to roof, ceiling etc including provision of 1.5 sqmm PVC insulated multistranded unsheathed copper conductor cable FR-LS (ISI Marked) with proper colour coding as earth continuity conductor connected to common earth dolly, modular sheet steel sunken terminal box of appropriate size suitable for modular switch/ fittings concealed in walls, with modular back plate, top cover fixed flush to wall for housing switches, socket outlets, fan regulators etc duly earthed including cutting chases of existing wall for for conduits and sinking for boxes and making good to the disturbed surface of wall/floor and matching with existing specifications. Connections of cable with MCB's or bus bar shall be done through proper size copper/brass thimbles all as specified and as directed for the following :-

One light point controlled by one way switch 5/6 amps.

One ceiling fan/Exhaut fan point controlled by one way switch 5/6 amps.

One socket out let 5/6 amps point on the independent board

All as per item No 151.00 above but wiring with 2.5 sq mm single core multistranded copper conductor for one socket out let 15/16 amps point on the independent board complete all as specified and directed

S&F of Modular switch, single pole, one way, 6 Amp, 1 Module, 230 volt, ISI marked complete all as specified and as directed.

S&F of Modular switch, single pole, one way, 16 Amp, 1 Module, 230 volt, ISI marked complete all as specified and as directed.

S&F of Modular shuttered Socket outlet 5 Pin, 6 Amp, 2 Module, 230 volts, ISI marked complete all as specified and as directed.

S&F of Modular shuttered Socket outlet 6 Pin, 6/16 Amp, 2 Module, 230 volts, (ISI marked) complete all as specified and as directed.

S&F of stepped type modular electronic fan regulator 120 watt 2 module suitable for 1200/1400 mm sweep energy saving fans,ISI marked complete all as specified and directed.

S&F ceiling rose, bakelite, surface type, 220/240 volts, three terminals complete all as specified and directed.

S&F White cover plate with frame, 3 module complete all as specified and directed.

S&F White cover plate with frame, 6 module complete all as specified and directed.

S&F Metal flush box 3 module complete all as specified and directed.

S&F Metal flush box 6 module complete all as specified and directed.

S&F IP 20, class I, LED light 1X18 W (or nearest next higher wattage) (4feet), 5700K, wall/ surface mounted, integrated type with aluminium housing and decorative and caps with integrated high efficiency electronic driver and surge suppressor of 2KV or more, luminaire efficiency > 95 lumens/watt, power factor > 0.90, operating range - 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/ square blocks, screws etc complete with all accessories internally prewired and connecting up with and including necessary taking down the old unserviceable fitting complete all as specified.

S&F IP 20, class I, LED light 1X10 W (or nearest next higher wattage) (2feet), 5700K, wall/ surface mounted, integrated type with aluminium housing and decorative and caps with integrated high efficiency electronic driver and surge suppressor of 2KV or more, luminaire efficiency > 95 lumens/watt, power factor > 0.90, operating range - 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/ square blocks, screws etc complete with all accessories internally prewired and connecting up with and including necessary taking down the old unserviceable fitting complete all as specified.

S&F Bulk head luminaire suitable for 10 Watt LED (or nearest next higher wattage) light IP66 grade, luminaire efficiency not less than 120 lumens/watts with and including 10 watt LED (or nearest next higher wattage) lamp and connecting up with and including PVC insulated 3 core of size 0.75 Sqmm copper conductor from ceiling rose to terminal block of light fitting including necessary taking down the old unserviceable fitting complete all as specified.

S&F Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25 watts with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting and GI pipe bracket made out of GI pipe medium grade 32 mm dia 1.5 mtr long bend to required shape complete incl removal of old unsv fitting , complete all as specified and as directed.

Taking down old unserviceable light fitting and Supply & fixing in replacement of LED 8 W land scape lighting bollard type pressure die cast powder coated housing with PC diffuser, efficient light output LED with IP66 including potted driver with surge protection upto 4 KV, by using 2 core PVC insulated cable aluminium conductor 2.5 Sqmm approx 2 m length complete all as specified and directed.

M&L Flexible PVC insulated multicore FR PVC sheathed multistranded copper conductor cable of 2.5 Sqmm x 3 core for voltage grade up to 1100 V conforming to IS 694 : 2010 for connection of light fitting from junction box or from over head conductors to fitting, complete all as specified and as directed.

S&F Non metallic PVC medium grade conduit 20 mm dia, ISI marked for drawing aluminium/ copper conductor cable between pole junction box and light fitting including fixing clamp made of GI strips and nut and bolts (Minimum 3 clamp in each pole to be provided.) including taking out old unserviceable, complete all as specified and directed.

S&F of Decorative wall light fixture made up of polycarbonate suitable for 09 Watt LED retrofit of type B-22 base, IP66 grade, with and including 09 watt LED (or nearest next higher wattage) lamp Base -22, rechargable with battery back up of minimum 4 Hrs with 02 years warranty, complete all as specified and directed.

S&F LED Slim cabinet profile light 1 feet each length, warm white color, white body CCT 6500 k, complete all as specified and directed.

M&L PCC 1:4:8 type D-2 with 40 mm graded aggregate for foundation of pole, stay , panels etc, complete all as specified and directed.

Taking down carefully Ceiling fan from its original position and refixing / hanging after B/R plaster work complete all as specified and directed.

S&F heavy duty exhaust fan 300 mm sweep MS body with anti dust painting, 4 blade with heavy duty motor and double ball bearing, 1320 RPM, single phase 230/240 volts copper wounds, Air delivery -1600 CMH complete with all accessories as bird guard/ louvers shutters etc incl making connections with 3 core flexible multistranded copper conductor of size 0.75 Sqmm run through flexible pipe all as specified and as directed including cutting holes and making good the disturbed surfaces of walls in CM(1:4) and finishing the surface as per existing color scheme, complete all as specified and directed.

S&F exhaust fan with louvers 250 mm sweep (Plastic rust proof Body and blade), energy efficient, AC single phase 240 volts, 50Hz connecting up complete including making holes and plastering the disturbed surfaces to make smooth and built in louvers and provision of 3 core flexible multistranded copper conductor of size 0.75 Sqmm from ceiling rose to fan all as specified and as directed.

S&F epoxy powder coated sheet metal enclosure with socket plug top and MCB, single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps, 240 Volts, C Series current carrying capacity 10 kA, incl necessary connection complete all as specified and directed.

S&F Sheet metal enclosure for 4 way Distribution Boards (DB’s), double door, Triple pole & neutral with 200 amps rated bus bar, 415Volt IP-20 protection suitable for fixing MCB"S/lsolators with and including taking down old one complete all as specified and directed.

S&F MCB distribution boards (DBs) with sheet metal enclosure, double door, IP 43 protection, 240 Volts, 4 way, single pole and neutral, with 200 Amps rated copper bus bar (as per OEM), neutral link, ertth link earthing studs, suitable for fixing MCBs, without MCBs fixed flush to wall/other surface complete all as specified and as directed.

S&F MCB, Triple pole & neutral 63 amps, 415 volts, ‘C’ curve, 10KA complete all as specified and as directed.

S&F MCB, Single pole & neutral, 32 to 63 amps, 240 volts, ‘C’ curve, 10KA all complete with and including taking down old unsv one as specified and as directed.

S&F MCB, Single pole, 5 to 32 amps, 240 volts, ‘C’ curve, 10 KA all complete with and including taking down old unsv one as specified and as directed.

Supply, laying, jointing & testing in trenches or passing through pipe, 1100 volts grade, XLPE insulated PVC bedded, galvanized steel strip or wire armoured LT electric power UG cables, heavy duty with stranded aluminium conductor of cross sectional area 10 sqmm 2 core with and including all fixing & connecting accessories such as Alluminium cable lugs, cable gland, nut, bolts, washer etc complete as specified and as directed. (Make: Havells/KEI / POLYCAB/RR Cable/Gloster cable) (NOTE: Earthwork & Excavation, GI pipe, bricks for protection etc shall be measured and paid separately under relevant items of this schedule 'A').

Excavation in trenches in soft/loose soil not exc. 1.5 metre wide and not exc. 1.5 metre in depth and getting out for taking up / laying under ground electric cable complete all as specified and as directed.

Returning, filling in, including spreading levelling watering and well rammming in layers not exceeding 25 cms in depth complete all as specified and as directed.

Removing surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and as directed.

Supply and lay dry river sand filling for under ground cable protection with a layer of 8cm deep before laying and 15cm covering above the top edge of cable after laying, complete all as specified and as directed.

Supply and laying sub class B bricks of size 25cmx12.5cmx7.5cm (+/-10% tolerance) for protection of UG cable with width equal to length of bricks as mechanical protection laid dry and flat complete all as specified and as directed.

M&L horizontal boring across the existing road without disturbing the road surface for inserting GI pipe complete all as specified and as directed. Note :- (i) Removal of surplus soil shall be deemed to be include in the unit Rate. (ii) GI pipe will be measured and paid separately under relevant item of Sch 'A'.

M&L 50 mm bore steel tubing light grade ISI marked for protection of cable including necessary joints, complete all as specified and as directed. Make: Tata/Jindal/Bansal

M&L laying of GI tubing 20 mm bore, medium grade, ISI marked, conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 like elbow, socket, tee, reducer, nipple, short piece, union etc as required at site and laid in trenches incl connecting with existing lines, complete all as specified and as directed. Note:(i) Union or long screw have to provided at starting / end point of jointing pipe line .Make - Tata/Jindal/Prakash

M&L GM globe/gate valve 20 mm bore with iron wheel head, screwed both ends for iron/PPR pipes, ISI marked, conf to IS including taking down old unserviceable, complete all as specified and as directed. Make : ZOLOTO / LEADER or equivalent make

M&L cutting existing GI pipe alteration or addition of 40/50 mm dia bore for inerstion of reducer Tee complete with all accessories , complete all as specified and as directed.

STAR ENTERPRISES (BID ID -3261068)

SG ENTERPRISE (BID ID -3260542)

Dilip Enterprise (BID ID -3260700)