Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.6 LAdmitted-Finance 49 EMPLOYEE COLONY KHURANA ROAD KAITHAL 136027 | KAITHAL | KAITHAL | HARYANA | 136027 | L1 | Admitted-Finance | |
| 2 | L2₹16.5 L+₹86,989.63 (5.58%)Admitted-Finance VILLAGE PANAURI P O JAMALPUR TEH GHARAUNDA DISTT KARNAL | KARNAL | KARNAL | HARYANA | L2 | Admitted-Finance |
| Sl No | Description | Qty | Unit | The Dada tulsi ram co op l and c society ltd L1 | The Shivaay co-op L and C society ltd L2 |
|---|---|---|---|---|---|
| 1.00 | Supplying, installation, Testing and Commissioning of LED surface mounted Batten light of
following body material and construction as per IS : 10322 with driver (Replaceable) as
per the requirement with Driver efficiency )85% ,Operating voltage AC 140-270 Volt, freq
50/60 hz, Operating temp range - 15 deg to 40 deg centigrade, internal surge protection
of 2.5 KV with Short and Open circuit protection ,THD ( 10% , P. F.=0.95, IP20, CRI )80 ,
Flicker free (flicker should be below 5 %), life time (LED,Driver and electrical circuitry), of
minimum 50000 Burning Hours with , 70% of initial Lumen maintained till life ends, CCT
3000°K / 4000°K / 5700°K /6000°K/ 6500°K (As per ANSI Bin), SDCM (Standard
Deviation Color Matching) (3, Maximum power consumption should not more than the
specified rating and Fixture shall be of relevant BIS standard and trade mark certificate (
T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on
housing. OEM must have its own in house NABL lab setup for all testing facilities for LED
fixtures. complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated
copper conductor single core cable and earthing etc. as required with Minimum 5 year
OEM warranty. System lumen efficacy )135 lm/Watt output . LM79 and LM80 Test report
from NABL lab for all testing required for LED fixtures as per BIS shall be submitted.
Shape size and CCT shall be as approved by Engineer- in-Charge as per requirement.
(Thermal management: heat sink of aluminum housing such that LED junction
temperature shall not rise above 90°C). Powder coated die cast /Extruded aluminum Body (Thickness = 1.20 mm) 18-22 Watt | 3 | Each | 250 ₹750 Lowest | 500 ₹1,500 |
| 2.00 | Recovery of Brick bats, complete in all respect. | 3.44 | cum | 600 ₹-2,064 | 2 ₹-6.88 Lowest |
| 3.00 | Recovery of Steel scrap, complete in all respect. | 45 | Kg. | 39 ₹-1,755 | 10 ₹-450 Lowest |
Tender Value
₹16.6 L
EMD Value
₹33,160
Closing Date
5 Oct 2026, 5:00 pmClosed
Smt Priyanka Saini
Municipal Corporation Karnal
Providing and Laying of IPB and other Misc. work in Open Area Opposite Chhoti Market, Model Town, Ward No. 11,M.C. Karnal (only for L/C societies)
2026_HRY_550640_1
202655D57B0D 77EB 4AFC B2BC 2D5F5B40217C747ULB
Open Tender
Civil Works
Works
60 days
Karnal
2 documents required · 2 mandatory
₹1,000
₹33,160
Yes
9 Oct 2026
26 Sept 2026
6 Oct 2026
26 Sept 2026
5 Oct 2026
26 Sept 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Supplying, installation, Testing and Commissioning of LED surface mounted Batten light of
following body material and construction as per IS : 10322 with driver (Replaceable) as
per the requirement with Driver efficiency )85% ,Operating voltage AC 140-270 Volt, freq
50/60 hz, Operating temp range - 15 deg to 40 deg centigrade, internal surge protection
of 2.5 KV with Short and Open circuit protection ,THD ( 10% , P. F.=0.95, IP20, CRI )80 ,
Flicker free (flicker should be below 5 %), life time (LED,Driver and electrical circuitry), of
minimum 50000 Burning Hours with , 70% of initial Lumen maintained till life ends, CCT
3000°K / 4000°K / 5700°K /6000°K/ 6500°K (As per ANSI Bin), SDCM (Standard
Deviation Color Matching) (3, Maximum power consumption should not more than the
specified rating and Fixture shall be of relevant BIS standard and trade mark certificate (
T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on
housing. OEM must have its own in house NABL lab setup for all testing facilities for LED
fixtures. complete in all respect i/c connections with 1.5 sq mm FRLS, PVC insulated
copper conductor single core cable and earthing etc. as required with Minimum 5 year
OEM warranty. System lumen efficacy )135 lm/Watt output . LM79 and LM80 Test report
from NABL lab for all testing required for LED fixtures as per BIS shall be submitted.
Shape size and CCT shall be as approved by Engineer- in-Charge as per requirement.
(Thermal management: heat sink of aluminum housing such that LED junction
temperature shall not rise above 90°C). Powder coated die cast /Extruded aluminum Body (Thickness = 1.20 mm) 18-22 Watt | 3 | Each | - | - |
| 2 | Recovery of Brick bats, complete in all respect. | 3.44 | cum | - | - |
| 3 | Recovery of Steel scrap, complete in all respect. | 45 | Kg. | - | - |
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.82 MB
BOQ_630416.xls
BOQ • 0.35 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .