Loading
Loading…
Loading…
Tender Value
₹3.0 L
EMD Value
₹6,000
Closing Date
26 May 2026, 1:00 pmClosed
University Engineer, C.U.
Office of the University Engineer Darbhanga Building, 87/1 College Street Kolkata- 700073, University of Calcutta.
Making Of a WALL Cabinet at Establishment (T) Third floor Darbhanga Building , College Street Campus , University of Calcutta.
2026_CU_1024594_1
E-tender/Eng/CT-375 /25-26 (2nd call)
Open Tender
CIVIL WORKS
Percentage
30 days
College Street Campus, C.U.
Please refer Tender documents.
3 documents required · 3 mandatory
₹0
₹6,000
31 Aug 2026
18 May 2026
28 May 2026
18 May 2026
26 May 2026
18 May 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | M.S. works in brackets made from flats, angles, tees etc. to sizes
specialy bent, twisted, forged; making holes drilled and fitted to
rafter of trusses with necessary bolts, nuts, washer or screws etc.
(length of straight not less than 230 mm) | 84.8 | Sqm. | 99.84 | ₹8,466.43 |
| 2 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (6mm nominal
size) excluding shuttering and reinforcement,if any, in gound floor as per
relevant IS codes. | 0.03 | Sqm. | 6,380 | ₹191.4 |
| 3 | Supplying, fitting and fixing boiling water proof ply conforming to IS: 710-1977bonded with phenol formaldehyde synthetic resin conforming to IS: 848-1974 ofapproved make and brand fitted and fixed as per design as per approval anddirection of Engineer-in-Charge. [excluding the cost of supporting frame work and teak wood batten/Lipping]
In AnyFloor(ii) 6mm | 9 | Sqm. | 1,122 | ₹10,098 |
| 4 | (vi) 19mm | 64.4 | Sqm. | 2,420 | ₹1,55,848 |
| 5 | Partition of teak veneer [1 mm] as per design fitted and fixed complete (excluding
the supporting frame work & necessary teak wood battens):
In Any floor(i) 4mm thick commercial quality | 137.7 | Sqm. | 465 | ₹64,030.5 |
| 6 | Supplying wooden moulding slanting beat of size 37mm X 18mm (finished) of
approved design to finish the joint between wooden frame of door/window with
masonary in true line and level fitted & fixed with adhesive and head less pins
complete as per direction of Engineer -in-charge.a) Teak wood beat | 25 | Sqm. | 109 | ₹2,725 |
| 7 | Supplying, fitting and fixing Godrej Multi Lock or equivallent . | 30 | Sqm. | 136 | ₹4,080 |
| 8 | Anodised aluminium decorative handle (hexagonal / fluted) of approed quality
fitted and fixed complete.i) 150mm plate x 10mm dia rod x 12mm hexagonal/fluted. | 29 | Sqm. | 87 | ₹2,523 |
| 9 | Anodised aluminium butt hinges of approved quality manufactured from extruded
section conforming to I.S. specification (I.S. 205/66) and fitted and fixed with
cadmium plated screws:iii) (i) 50 x 45 x 2.5mm. | 37 | Sqm. | 60 | ₹2,220 |
| 10 | French polishing to wood work including preparing surface (High Gloss) a) On new wood work | 3 | Sqm. | 700.5 | ₹2,101.5 |
stage.html
html • 0.02 MB
cancelled_1.pdf
pdf • 0.39 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.63 MB
BOQ_2518058.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .