REPAIR AND REPLACEMENT OF VARIOUS PARTS OF MISC STEEL and WOODEN FURNITURE UNDER GE UMROI

Amount

Locker Steel includes following items, working at units site (TP);-

M&L for removing of existing old unsv handle set and S&F new CP handle set as per existing shape and size complete all as specified and directed by Engr-in-charge .

M&L for removing of existing old unsv hasp and stapple and S&F new CP hasp and stapple of exising shape and size complete all as specified and directed by Engr-in-charge.

M&L for removing of existing old unsv hinges and S&F new hinges of exising shape and size complete all as specified and directed by Engr-in-charge .

M&L for removing of existing old unsv base/legs and S&F new base/legs made of MS sheet 1mm thick of exising shape and size complete all as specified and directed by Engr-in-charge .

M&L for removing of existing old unsv shelves and S&F new shelves made of MS sheet 1mm thick of existing shape and size complete all as specified and directed by Engr-in-charge .

M&L for removing of existing old unsv door shutter and S&F new door shutter made of MS sheet 1mm thick of existing shape and size complete all as specified and directed by Engr-in-charge .

M&L for removing of existing old unsv conduit pipe & bracket set and S&F new conduit pipe with bracket set of exising shape and size complete all as specified and directed by Engr-in-charge .

M&L for welding to be done where required & grinding till smooth finish, removing of existing dent upto reshaped, removing of old paints by scrubbing with sand/emery paper and repaint the Locker steel outer & inner portion by applying two coats of synthetic enamel paints through spray gun till glossy shine over a coat of red oxide primer complete all as specified and directed by Engr-in-charge. Note :- Shade of paints applied on furniture as approved by the GE.

Almirah Large/Med Steel includes following items (refer Drg No FD-1031/1032/TP):

M&L for removing of existing old unsv handles of drawer and S&F CP handle of drawer as per existing shape and size of almirah large locker & drawer complete all as specified and directed by Engr-in-charge.

M&L for removing of existing old unsv handles of locker and S&F new CP handle of locker as per existing shape and size of almirah large locker & drawer complete all as specified and directed by Engr-in-charge.

M&L for removing of existing old unsv handles and S&F new CP handles as per existing shape and size of almirah large/Med complete all as specified and directed by Engr-in-charge.

M&L for removing of existing old unsv locks with key cover and S&F new locks 6 lever ISI Marked with key cover (decorative) of existing shape and size of almirah large/Med complete all as specified and directed by Engr-in-charge.

M&L for removing of existing old unsv 3 way locking device and S&F new 3 way locking device including MS rod of existing shape and size of almirah large/Med complete all as specified and directed by Engr-in-charge.

M&L for removing of existing old unsv towel rails and S&F new towel rails with bracket of existing shape and size of almirah large locker & drawer complete all as specified and directed by Engr-in-charge.

M&L for removing of existing old unsv hinges and S&F new hinges of exising shape and size of almirah large/Med complete all as specified and directed by Engr-in-charge.

M&L for removing of existing old unsv base/legs and S&F new base/legs of MS sheet 1mm thick of exising shape and size of almirah large/Med complete all as specified and directed by Engr-in-charge.

M&L for removing of existing old unsv shelves and S&F new shelves made of MS sheet 1mm thick & welding to be done where required of exising shape and size of almirah large/Med complete all as specified and directed by Engr-in-charge.

M&L for removing of existing old unsv door shutter and S&F new door shutter made of MS sheet 1mm thick of existing shape and size of almirah Med complete all as specified and directed by Engr-in-charge.

M&L for removing of existing old unsv door shutter and S&F new door shutter made of MS sheet 1mm thick of existing shape and size of almirah large complete all as specified and directed by Engr-in-charge.

M&L for welding to be done where required & grinding till smooth finish, removing of existing dent upto reshaped and removing of old paints by scrubbing with sand/emery paper and repaint the Almirah Med Steel outer & inner portion by applying two coats of synthetic enamel paints through spray gun till glossy shine over a coat of red oxide primer complete all as specified and directed by Engr-in-charge. Note :- Shade of paints applied on furniture as approved by the GE.

M&L for welding to be done where required & grinding till smooth finish, removing of existing dent upto reshaped and removing of old paints by scrubbing with sand/emery paper and repaint the Almirah large steel outer & inner portion by applying two coats of synthetic enamel paints through spray gun till glossy shine over a coat of red oxide primer complete all as specified and directed by Engr-in-charge. Note :- Shade of paints applied on furniture as approved by the GE.

Book Case LP Steel including following items refer Drg No (FD-190M, 1028/TP)

M&L for removing of existing old unsv handles of book case and S&F new CP handle of Book case as per existing shape and size all as specified and directed by Engr-in-charge.

M&L for removing of existing old unsv locks and S&F new locks 6 lever ISI Marked of existing shape and size all as specified and directed by Engr-in-charge.

M&L for removing of existing old unsv door shutter and S&F new door shutter made of MS sheet 1mm thick of existing shape and size all as specified and directed by Engr-in-charge.

M&L for removing of existing old unsv glass of door shutter and S&F new plain glass not less then 5mm thick of door shutter of existing shape and size all as specified and directed by Engr-in-charge.

M&L for welding to be done where required & grindig till smooth finish, removing of existing dent upto reshaped and removing of old paints by scrubbing with sand/emery paper and repaint the Book case steel outer & inner portion by applying two coats of synthetic enamel paints through spray gun till glossy shine over a coat of red oxide primer complete all as specified and directed by Engr-in-charge. Note :- Shade of paints applied on furniture as approved by the GE.

Chair CB steel with arms including following items refer Drg No (FD-75(M) :-

M&L for removing of existing old unsv seat and S&F new seat made of second class hardwood well seasoned duly caned with 2mm half round cane plastic in godrej pattern and providing 4 nos flat iron strips of size 40mm x 25mm x 5mm thick to be welded with the frame all as specified and shown on drawing or as directed by Engr-in-charge ..

M&L for removing of existing old unsv back and S&F new back made of second class hardwood well seasoned duly caned with 2mm half round cane plastic in godrej pattern all as specified and shown on drawing or as directed by Engr-in-charge ..

M&L for removing of existing old unsv Arm rest and S&F new Arm rest made of second class hardwood well seasoned as per exising shape and size all as specified and shown on drawing or as directed by Engr-in-charge ..

M&L for removing of existing old unsv PVC caps and S&F new PVC caps of exising shape and size all as specified and shown on drawing or as directed by Engr-in-charge ..

M&L for removing of existing old paints by scrubbing with sand/emery paper and repaint the Chair CB steel with arms by applying two coats of synthetic enamel paints over a coat of red oxide primer complete all as specified and shown on drawing or as directed by Engr-in-charge .

Chair CB steel without Arms including following items refer Drg No (FD-75(M) :-

M&L for removingof existing old unsv seat and S&F new seat made of second class hardwood well seasoned duly caned with 2mm half round cane plastic in godrej pattern and providing 4 nos flat iron strips of size 40mm x 25mm x 5mm thick to be welded with the frame all as specified and shown on drawing or as directed by Engr-in-charge.

M&L for removing of existing old unsv back and S&F new back made of second class hardwood well seasoned duly caned with 2mm half round cane plastic in godrej pattern all as specified and shown on drawing or as directed by Engr-in-charge.

M&L for removing of existing old unsv PVC caps and S&F new PVC caps of exising shape and size all as specified and shown on drawing or as directed by Engr-in-charge ..

M&L for welding to be done where required & grinding till smooth finish and removing of existing old unsv paints by scrubbing without sand/emery paper incliding repaint the Chair CB steel with arms by applying two coats of synthetic enamel paints over a coat of red oxide primer complete all as specified and shown on drawing or as directed by Engr-in-charge .

Chair School PVC with hand board including following items refer Drg No (FD/E6/MAP/05)

M&L for removing of existing old unsv writing pad top and S&F new writing pad with MS clamp top made of 18mm thick prelaminated particle board exterior grade openable with pvc edging (hinged on RHS) screw to 25mm dia hollow steel pipe inserted in 20mm dia ms rod welded to frame (welding to be done where required ) with the chairs all as specified and shown on drawing or as directed by Engr-in-charge .

M&L for removing of existing old unsv PVC Seat & back and S&F new seat & back with the chair all as specified and shown on drawing or as directed by Engr-in-charge .

M&L for removing of existing old unsv book rack and S&F new book rack by contineous welding without damaging the other parts and match with the other parts of chair all as specified and shown on drawing or as directed by Engr-in-charge .

M&L for removing of existing old unsv PVC rubber shoe and S&F new rubber shoe with the chair all as specified and shown on drawing or as directed by Engr-in-charge .

M&L for removing of existing old paints by scrubbing with sand/emery paper including repaint the chair school with hand board portion by applying two coats of synthetic enamel paints over a coat of red oxide primer complete all as specified and shown on drawing or as directed by Engr-in-charge .

Table Dining OR including following items refer Drg No (FD-165) :-

M&L for removing of existing top and S&F new top made out of block board commercial 18/19mm BWP grade duly covered with 22gauge aluminium sheet all as specified and shown on drawing or as directed by Engr-in-charge.

M&L for removing of existing long rail and S&F new long rail made out of square MS pipe 25mm dia of 1.6mm thick fix by contineous welding without damaging the other parts and match with the other parts all as specified and shown on drawing or as directed by Engr-in-charge .

M&L for removing of existing short rail and S&F new short rail made out of square MS pipe 25mm dia of 1.6mm thick fix by contineous welding without damaging the other parts and match with the other parts all as specified and shown on drawing or as directed by Engr-in-charge .

M&L for removing of existing leg and S&F new leg made out of square MS pipe 25mm dia of 1.6mm thick fix by contineous welding without damaging the other parts and match with the other parts all as specified and shown on drawing or as directed by Engr-in-charge.

M&L for removing of existing old unsv rubber shoe and S&F new rubber shoe with the table complete all as specified and shown on drawing or as directed by Engr-in-charge .

M&L for removing of existing old unsv paints by scrubbing with sand/emery paper including repaint the table by applying two coats of synthetic enamel paints over a coat of red oxide primer complete all as specified and shown on drawing or as directed by Engr-in-charge .

Repair of Form with back includes following items (Refer Drg No. FD-78)

M&L for removing of existing old unsv seat plank and S&F new seat plank 25mm thick made out 1st Class hard wood well seasoned free from cracks & dead knots complete all as specified and shown on drawing or as directed by Engr-in-charge.

M&L for removing of existing old unsv back plank and S&F new back plank 25mm thick made out 1st Class hard wood well seasoned free from cracks & dead knots complete all as specified and shown on drawing or as directed by Engr-in-charge.

M&L for removing of existing leg and S&F new leg made out of square MS pipe 25mm dia of 1.6mm thick fix by contineous welding without damaging the other parts and match with the other parts complete all as specified and shown on drawing or as directed by Engr-in-charge.

M&L for removing of existing old unsv PVC rubber shoe and S&F new rubber shoe with the form with back complete all as specified and shown on drawing or as directed by Engr-in-charge .

M&L for removing of existing old unsv paints by scrubbing with sand/emery paper including repaint the form with back by applying two coats of synthetic enamel paints over a coat of red oxide primer complete all as specified and shown on drawing or as directed by Engr-in-charge .

Repair of Form without back includes following items (Refer Drg No. FD-78)

M&L for removing of existing seat plank and S&F new seat plank 25mm thick made out 1st Class hard wood well seasoned free from cracks & dead knots complete all as specified and shown on drawing or as directed by Engr-in-charge.

M&L for removing of existing leg and S&F new leg made out of square MS pipe 25mm dia of 1.6mm thick fix by contineous welding without damaging the other parts and match with the other parts complete all as specified and shown on drawing or as directed by Engr-in-charge.

M&L for removing of existing old unsv PVC rubber shoe and S&F new rubber shoe with the form w/o back complete all as specified and shown on drawing or as directed by Engr-in-charge .

M&L for removing of existing old unsv paints by scrubbing with sand/emery paper including repaint the form w/o back applying by two coats of synthetic enamel paints over a coat of red oxide primer complete all as specified and shown on drawing or as directed by Engr-in-charge .

Repair of Desk 4' long includes following items (Refer Drg No.FD 107):

M&L for removing of existing old unsv top/bottom of box and S&F new top/bottom of box made out of 1st Class hard wood well seasoned free from cracks & dead knots incl tightening the whole frame all as specified & shown on drg or complete as directed by Engr-in-Charge.

M&L for removing of existing old unsv back plywood of box and S&F new commercial plywood 6mm thick BWR grade in the same position of desk complete all as specified and shown on drawing or as directed by Engr in Charge.

M&L for removing of existing old unsv side of box and S&F new side of box made out of 1st Class hard wood well seasoned free from cracks & dead knots incl tightening the whole frame complete all as specified & shown on drg or as directed by Engr-in-Charge.

M&L for removing of existing old unsv legs and S&F new legs existing shape and size as required duly welded to all the places complete all as specified and shown on drawing or as directed by Engr-in-charge.

M&L for removing of existing old unsv stiffener and S&F new stiffener of existing shape and size as required duly welded to all the places complete all as specified and shown on drawing or as directed by Engr-in-charge ..

M&L for removing of existing old unsv foot rest and S&F new foot rest of existing shape and size as required duly welded to all the places complete all as specified and shown on drawing or as directed by Engr-in-charge ..

M&L for removing of existing old unsv PVC rubber shoe and S&F new rubber shoe with the desk 4' long complete all as specified and shown on drawing or as directed by Engr-in-charge .

M&L for removing & scrubbing of old polish by sand/emery paper and prepairing all the surfaces as smooth including repolish the same with high gloss french polish on wooden part and also M&L for removing existing UNSV paints by scrubbing with sand/emery paper including repaint the MS frame of desk 4' long by applying two coats of synthetic enamel paints over a coat of red oxide primer complete all as specified and shown on drawing or as directed by Engr-in-charge .

Repair of Table 3'x3' & 3'x2' with/without drawer includes following items (refer Drg No.FD-283,284,291 & 88):

M&L for removing of existing old unsv top and S&F new top made of Pre laminated Particle board 18/19mm thick one side teak face other side white exterior grade incl providing 4mm thick hard wood beading all round of Table 3'x3' complete all as specified and shown on drg or as directed by Engr-in-Charge.

M&L for removing of existing old unsv top and S&F new top made of Pre laminated Particle board 18/19 mm thick one side teak face other side white exterior grade incl providing 4 mm thick hard wood beading all round of Table 3'x2' with or without drawer complete all as specified and shown on drg or as directed by Engr-in-Charge.

M&L for removing of existing old unsv leg and S&F new legs made out of 1st Class hard wood well seasoned free from cracks & dead knots incl tightening the whole frame all as specified & shown on drg or as directed by Engr-in-Charge.

M&L for removing of existing old unsv long rail and S&F new long rail made out of 1st Class hard wood well seasoned free from cracks & dead knots incl tightening the whole frame all as specified & shown on drg or as directed by Engr-in-Charge.

M&L for removing of existing old unsv long rail and S&F new long rail made out of 1st Class hard wood well seasoned free from cracks & dead knots incl tightening the whole frame of table 3'x2' with or without drawer all as specified & shown on drg or as directed by Engr-in-Charge.

M&L for removing of existing old unsv drawer and S&F new side of drawer made out of 1st Class hard wood well seasoned free from cracks & dead knots, bottom of drawer made out of 6mm thick commercial plywood and also providing existing CP knob incl tightening the whole frame of table 3'x2' with drawer all as specified & shown on drg or as directed by Engr-in-Charge.

M&L for removing of existing old unsv stiffener and S&F new stiffener made out of 1st Class hard wood well seasoned free from cracks & dead knots of table 3'x2' with or without drawer all as specified & shown on drg or as directed by Engr-in-Charge.

M&L for removing of existing old unsv corner and S&F new corner made out of 1st Class hard wood well seasoned free from cracks & dead knots all as specified & shown on drg or as directed by Engr-in-Charge.

M&L for removing old unsv PVC hard shoe and S&F new PVC/hard rubber shoe complete all as directed by Engr in Charge.

M&L for removing & scrubbing of old polish by sand/emery paper including prepairing old/new surfaces of table as smooth and repolish the same with high gloss french polish complete all as specified & shown on drg or as directed by Engr-in-Charge.

Repair of Tressel Store Room wooden includes following items (refer Drg No.FD-86(M)):

M&L for removing of existing old unsv long rail and S&F new long rail made out of 2nd Class hard wood well seasoned free from cracks & dead knots complete all as specified & shown on drg or as directed by Engr-in-Charge.

M&L for removing of existing old unsv leg and S&F new leg made out of 2nd Class hard wood well seasoned free from cracks & dead knots complete all as specified & shown on drg or as directed by Engr-in-Charge.

M&L for removing of existing old unsv short rail and S&F new short rail made out of 2nd Class hard wood well seasoned free from cracks & dead knots complete all as specified & shown on drg or as directed by Engr-in-Charge.

M&L for removing & scrubbing of old layer of wooden surfaces shall be treated with two coat of creosote oil/paint complete all as specified & shown on drg or as directed by Engr-in-Charge.

Repair of Locker Wooden includes following items (refer Drg No.FD 54(M)):

M&L for removing of existing old unsv top and S&F new top made of block board 18/19mm BWR grade fixed in position of locker complete all as specified and shown on drg or as directed by Engr in Charge.

M&L for removing of existing old unsv side and S&F new side made of block board 18/19mm BWR grade fixed in position of locker complete all as specified and shown on drg or as directed by Engr in Charge.

M&L for removing of existing old unsv ply wood from back and S&F new back of commercial plywood 6mm thick BWR grade fixed in the same position of wooden locker complete all as specified and shown on drawing or as directed by Engr in Charge.

M&L for removing old unsv door shutter & hinges and S&F new door shutter (single leaf) made of block board 18/19mm BWR grade & fixed with new piano type stainless steel hinges in position of locker complete all as specified and shown on drg or as directed by Engr in Charge.

M&L for Removing of existing old unsv leg and S&F new leg of existing size made by 1st class hard wood well seasoned free from crack & knots complete all as specified and shown on drg or.as directed by Engr in Charge.

M&L for removing of existing old unsv shelves and S&F new shelves made of block board 18/19mm BWR grade fixed in position of locker complete all as specified and shown on drg or as directed by Engr in Charge.

M&L for removing of existing old unsv alluminum handle and S&F new aluminium handle complete all as specified and shown on drg or as directed by Engr in Charge.

M&L for removing of existing old unsv alluminum hasp & staple and S&F new aluminium hasp & staple complete all as specified and shown on drg or as directed by Engr in Charge.

M&L for removing of existing old unsv stainless steel courtain rod 20mm dia and S&F new stainless steel courtain rod 20mm dia complete all as specified and shown on drg or as directed by Engr in Charge.

M&L for removing old paint from surface including repaint the all external & internal surface of locker wooden by applying two coat of synthetic enamel paint (approved shade/colour) complete all as specified and shown on drg or as directed by Engr-in-charge

Repair of Chair Easy includes following items (refer Drg. No. FD-229):-

M&L for removing of existing old unsv rail and S&F new rail with suitable holes made out of 1st Class hard wood well seasoned free from cracks & dead knots incl tightening the whole frame complete all as specified & shown on drg or as directed by Engr-in-Charge.

M&L for removing of existing old unsv front leg and S&F new front leg made out of 1st Class hard wood well seasoned free from cracks & dead knots incl tightening the whole frame complete all as specified & shown on drg or as directed by Engr-in-Charge.

M&L for removing of existing old unsv rear leg and S&F new rear leg made out of 1st Class hard wood well seasoned free from cracks & dead knots incl tightening the whole frame complete all as specified & shown on drg or as directed by Engr-in-Charge.

M&L for removing of existing old unsv arm/hand rest and S&F new arm/hand rest made out of 1st Class hard wood well seasoned free from cracks & dead knots incl tightening the whole frame complete all as specified & shown on drg or as directed by Engr-in-Charge.

M&L for removing of existing old unsv cane including providing & reweaving of chair easy (both Seat & back) by cane plastic 2mm half round in godrej pattern and providing 4 mm wide border complete all as specified & shown on drg or as directed by Engr-in-Charge.

M&L for removing of existing old unsv pvc hard shoe and S&F new pvc hard shoe complete all as specified & shown on drg or as directed by Engr-in-Charge.

M&L for removing & scrubbing of old polish by sand/emery paper including preparing new surfaces of chair easy as smooth and repolish the same with high gloss french polish complete all as specified & shown on drg or as directed by Engr-in-Charge.

Repair of Chair writing includes following items (refer Drg No. FD-250, FD-280):-

M&L for removing of existing old unsv rail and S&F new rail with suitable holes made out of 1st Class hard wood well seasoned free from cracks & dead knots including tightening the whole frame complete all as specified & shown on drg or as directed by Engr-in-Charge.

M&L for removing of existing old unsv front leg and S&F new front leg made out of 1st Class hard wood well seasoned free from cracks & dead knots including tightening the whole frame complete all as specified & shown on drg or as directed by Engr-in-Charge.

M&L for removing of existing old unsv rear leg and S&F new rear leg made out of 1st Class hard wood well seasoned free from cracks & dead knots including tightening the whole frame complete all as specified & shown on drg or as directed by Engr-in-Charge.

M&L for removing of existing old unsv stiffner and S&F new stiffner made out of 1st Class hard wood well seasoned free from cracks & dead knots including tightening the whole frame complete all as specified & shown on drg or as directed by Engr-in-Charge.

M&L for removing of existing old unsv arm/hand rest and S&F new arm/hand rest made out of 1st Class hard wood well seasoned free from cracks & dead knots including tightening the whole frame complete all as specified & shown on drg or as directed by Engr-in-Charge.

M&L for removing of existing old unsv back rest and S&F new back rest made out of 1st Class hard wood well seasoned free from cracks & dead knots including tightening the whole frame complete all as specified & shown on drg or as directed by Engr-in-Charge.

M&L for removing of existing old unsv cane and S&F of chair writing by cane plastic 2mm half round in godrej pattern and providing 4 mm wide border complete all as specified & shown on drg or as directed by Engr-in-Charge.

M&L for removing of existing old unsv pvc hard shoe and S&F new pvc hard shoe complete all as specified & shown on drg or as directed by Engr-in-Charge.

M&L for removing & scrubbing of old polish by sand/emery paper including preparing new surfaces of chair writing as smooth and repolish the same with high gloss french polish complete all as specified & shown on drg or as directed by Engr-in-Charge.

Repair of Chair Dining includes following items (refer Drg No. FD-279/228 & FD/MAP-II/05):-

M&L for removing of existing old unsv rail and S&F new rail with suitable holes made out of 1st Class hard wood well seasoned free from cracks & dead knots including tightening the whole frame complete all as specified & shown on drg or as directed by Engr-in-Charge.

M&L for removing of existing old unsv front leg and S&F new front leg made out of 1st Class hard wood well seasoned free from cracks & dead knots including tightening the whole frame complete all as specified & shown on drg or as directed by Engr-in-Charge.

M&L for removing of existing old unsv rear leg and S&F new rear leg made out of 1st Class hard wood well seasoned free from cracks & dead knots including tightening the whole frame complete all as specified & shown on drg or as directed by Engr-in-Charge.

M&L for removing of existing old unsv stiffner and S&F new stiffner made out of 1st Class hard wood well seasoned free from cracks & dead knots including tightening the whole frame complete all as specified & shown on drg or as directed by Engr-in-Charge.

M&L for removing of existing old unsv back rest and S&F new back rest made out of 1st Class hard wood well seasoned free from cracks & dead knots including tightening the whole frame complete all as specified & shown on drg or as directed by Engr-in-Charge.

M&L for removing of existing old unsv cane including providing & reweaving of chair dining by cane plastic 2mm half round in godrej pattern and providing 4mm wide border complete all as specified & shown on drg or as directed by Engr-in-Charge.

M&L for removing of existing unserviceable PVC seat from chair dining and S&F same with new PVC seat as shown in Drg. No. FD MAP-II/05 complete all as specified & shown on drg or as directed by Engr-in-Charge.

M&L for removing of existing old unsv pvc hard shoe and S&F new pvc hard shoe complete all as specified & shown on drg or as directed by Engr-in-Charge.

M&L for removing & scrubbing of old polish by sand/emery paper including preparing new surfaces of chair dining as smooth and repolish the same with high gloss french polish complete all as specified & shown on drg or as directed by Engr-in-Charge.

Schedule of Credit

Vinayak Distributors

KIRAN REED INDUSTRIES