Campus Development works at HSS Malwan

Earth work in excavation by mechanical means (hydraulic excavator) in trenches forfoundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts,wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sidesand ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed

Providing and laying of stone soling 75 mm nominal size in trenches hand packed all inclusive leads, lifts, loading, unloadingg, head load, ramming/dressing and carriage of materials from approved nearest sources tol site of work complete

Providing and laying in position cement concrete of specified grade including curing butexcluding the cost of centring and shuttering. All work upto plinth level with1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) incld: all carriages

Providing and laying in position cement concrete including including curing butexcluding the cost of centring and shuttering. All work upto plinth level with 1:11/3 (1 cement:11/2 Coarse sand: 3graded stone aggregrate 40 mm nominal size incld: all carriages

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo Mechanically treated bars of grade Fe-500D or more

Centring and Shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columnsetc. For mass complete

Structural steel work in single section, fixed with or without connectingplate, including cutting, hoisting, fixing in position and applying a primingcoat of approved steel primer all complete. The section shall specifically include circular hollow sections welded seamlessly in free flowing cirular profiles as desired by enfineer in charge (in addition to other sections) including two coats of steel primer and coats of steel primer and two coats of synthetic enamel paint over steel work

Providing corrugated sheet roofing in curvilinear profile including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required 0.5 mm thick with zinc coating not less than 350 gram/m2

Thermal Insulation of roofing with Expanded polystyrene fixed with suitable adhesive to the false ceiling as per the directions of the Engineer-in-charge. With Type N-Normal 50 mm thick.

Chequerred precast cement concrete tiles 22mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing, cleaning and curing complete, on 20 mm thick bed of cement mortar (1 cement : 4 coarse sand). Ordinary cement without any pigment incl: carriage