ADDN/ALTN AND SPECIAL REPAIR TO OTM ACCN OF ASC BN, EME BN AND IDSR UNDER GE(SOUTH) SECUNDERABAD.

Amount

Dismantling timber scantlings in unframed work 40 sq. cm and over in section fixed in any position complete all as specified and as directed.

S&F Rolled sections of grade Fe 410W (Gde E-250)as in main and cross beams, hip and jack rafters, Truss, purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and as directed.

Dismantling AC corrugated or semi corrugated etc sheets in roof coverings complete all as specified and as directed.

M&L Pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strengh of 550 mpa as on roof covering/ridges fixed with self tapping screws complete all as specified and directed.

Dismantling of wall and ceiling boards ( fiber pulp insullation etc ) or insullation boards / slabs, blankets any thickness including cover fillets complete all as specified and as directed.

S & F in anodised aluminium snap grid frame work for false ceiling including supporting wire all as specified of size of grid 605 x 605mm. complete all as specified and as directed.

S & F 4mm thick non-asbestos fibre cement building boards fixed or laid/inserted to aluminium / wooden frame work with screws including two coats of OBD over a coat of alkali resistant primer and preparation of new surfaces of ceiling. complete all as specified and as directed.

Demolition of cement concrete(unreinforced) of any description and in any position not otherwise specifically provided including floor finishes complete all as specified and directed.

M&L for 75mm thick PCC (1:3:6) type C-1 (20 mm graded aggregate) as in plinth protection finished even and smooth without using extra cement including forming 6mm wide joints at n,exc 2.0 sqm area and filling with mastic comprising one part of heated bitumen 85/25 grade and three parts of sand complete all as specified.

M&L for 25 mm thick plain cement concrete 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as below floor finish complete all as specified.

M&L for Machine cut kota stone slab flooring 18-20mm thick over cement 20mm screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for machine cut kota stone slab 18-20 mm thick in riser of steps, skirting,dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete incl 10mm thick rendering in CM (1:3) backing of wall tiles such as dado/skirting in vertical surface complete all as specified and directed.

M&L 16 to 18mm thick granite stone (of any type ) work (table rubbed and polished) in floors, staircase tread & risers of steps, cooking platform, window cill/jambs etc laid bedded over 15mm thick CM (1:4) bedding & pointed in white/coloured cement to match coloured tiles including Rounding, grinding and mirror polishing complete. (Note : Colour of granite shall be as approved by Engr-In-Charge)

M&L 40 mm thick polished cudappah stone slab in vertical and horizontal support for cooking platform, shelves, window cill and like incl necessary jointing and pointing and making good to disturbed surface complete all as specified

Taking out old unserviceable floor, hearth or wall tiling including cement mortar bedding (but not backing and rubbish off the premises complete all as specified and as directed

M & L for Vitrified ceramic tiles light shade 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding in layer of CM 1:6 for laying floor finishes complete all as specified and directed.

Ditto all as per item No 17 above but as in skirting / dados etc. including backing coat 10mm thick in cement mortar 1:4, complete all as specified.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for glazed ceramic coloured tiles 450x300x7mm thick on vertical surfaces such as dados set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick backing coat in CM 1:4 complete all as directed.

Taking down plastering in cement mortar on brick or stone wall etc including racking out joints hacking for key scrubbing down with water etc. complete all as specified.

M&L for rendering 15mm thick on fair faces of brick works in CM 1:6 finished even and smooth without using extra cement complete all as specified.

Material and labour for rendering 5mm thick in cement mortar (1:4) with WPC over a layer of 10 mm thick in CM 1:6 on fair faces of brickwork or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and directed.

M&L for prepartion of new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer and one coat of wall care putty complete all as specified and directed.

M&L for complete removal of existing wall treatment of old surfaces and applying two coats of oil bound distemper over one coat of primer and a coat of wall care putty complete all as specified and directed.

M&L for Complete removal of existing old plastered or unplastered surfaces on walls applying two coat of cement based paintover one coat of primer all as specified and directed .

M & L for preparing new plastered or unplastered surfaces on walls including cornices and applying two coat of cement base over one coat of primer paint complete all as specified and as directed .

Taking down chowkats or frames with shutters (without taking off shutter from the frames ) exceeding 1.5 Sqm each but n.exc. 4 sqm each complete all as specified and directed .

Taking down chowkats or frames with shutters (without taking off shutter from the frames ) not exceeding 1.5 Sqm each incl steel window, ventilators etc complete all as specified.

Supply and fix Pressed steel door frame of size 125 X60 mm with one or more rebates including necessary fixing lugs , hinges , lock strike plate etc complete all as specified and as directed .

M&L Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M S Square tube, supplying and fixing in opening as per manufacturers instructions all as directed.

S&F Factory made solid panel laminated PVC door shutter 30mm thick (style) consisting of frame made out M.S tube for top & bottom rails. M.S Srame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail : Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/scaled the stiles & rails with suitalble PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specifications & drawing.

Material and Labour for PCC 1:2:4 Type B0 ( using 12.5 mm graded stone aggregate ) as in filling in pressed steel door frame complete all as specified and as directed .

Material and labour for PCC (1:3:6) type C-1 using 20 mm graded stone aggregate as in block for fixing of hold fast , window cill and similar items including necessary formwork complete all as specified and as directed .

S&F for ECO – 4000 Series Windows (Double Rebate Windows)Providing & Fixing Windows/ ventilators fabricated from roll framed sections made of galvanized steel colour coated/ powder coated (Base steel as per IS 513 “D” quality galvanized as per IS 277 with zinc of 120 gms/Sqr. Mtr.) with total coated thickness of 0.58mm. Paint Specifications:- Coated sections should be with Primer coat of Epoxy Primer of 5-7 microns thick, finish painted with Polyester paint of 12-16 microns thick or Powder Coated with pure Polyester up to 50-60 microns thick. Dimensions of Sections:- Sections for Frame should be of 72mm x 55mm, Section for Mullion should be of 72mm x 50mm, Section for Shutter Frame should be of 47mm x 20mm, Section for Fixed Glass Bead should be of 12mm x 12mm, and Section for Fly Mesh should be of 40mm x 20mm. Fixing Details:- Section for Frame Glazed Shutters and Mesh Shutters should be cut to length and miter joined with Polypropylene Corner Brackets, Mullion Section should be joined with Frame/Mullion using Mullion Cap Ethyl Propylene Damien Monomer (EPDM) Gasket should be used all around glass in shutter and Fixed Glass. Spoon Section should be used around Fly mesh to fix Mesh in Mesh Shutter.Accessories:- Each Glazed Shutter and Mesh shutter should be provided with SS Pivot Hinges – 1 set, Seccolor Handle & Seccolor Stay. Window Frame should be fixed to brick/ concrete masonry by using Nylon self expanding caps and driving MS electroplated 80mm long screws into the caps through frame Glass:- Glass shutter & Fixed Glass portions should be provided with a glass of 4MM Plain Float Glass.

Mesh:- Mesh Shutter should be provided with a Stainless Steel 0.23mm Fly mesh of 304 grades. Grill:- Windows should be provided with Grill made of 10mm sq. MS Bars welded to at 150mm center-to-center, 6mm x 12mm MS flat. Total grill unit should be powder coated and fixed to window frame with screws. Make: - NCL Buildtek Ltd Or Equivalent.

Providing and Fixing Fixed Louvers fabricated from Roll formed sections made of galvanized Steel colour coated/powder coated (Base Steel as per IS 513 ‘D’ quality, galvanized as per IS 277 with zinc of 120 GM/Sq.mtr) with total coated thickness of 0.58mm. Paint Specifications:- Primer coat with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with Alkyd backer of 5-7 microns or powder coated with pure polyester powder up to 50-60 microns thick. Dimensions:- The section for external frame should be of 33 x 57 mm. Accessories:- Glass holding flanges made of polypropylene. Fixing Details: The sections are to be cut to length, miter joined with corner bracket. The above frames should be fixed to the concrete/masonry walls by means of self expanding screws. Glass: - 4mm pin head glass / frosted glass Grill:- 10 mm square guard bars with 6 inch pitch. Make: - NCL Buildtek Ltd Or Equivalent.

S&F 40 mm thick flush shutter ,solid core construction ,with block board core and both face is covered with decorative face veneer with lipping/frame to match complete all as specified and as directed.

S & F sheet glass ordinary quality 3mm thick and glazing with oil putty/glazing clips of any description n.exc 0.5 Sqm. complete all as specified and as directed.

S&F glazed and skelton shutters divided into squares with plain, chamfered or rounded, mitred and rebated sash bars prepared to receive glass, gauge sizes of members of shutters as specified in SSR Pt-I, section 8 , clause 8.24 (A) 35mm thick second class hard wood complete all as specified and as directed.

S&F 100 mm long butt hinges extruded aluminium alloy with galvanised mild steel hinge pin complete all as specified.

S&F 150mm size aluminium anodised handles, fabricated type complete all as specified.

S&F 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified.

S&F in repairs stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.0 mm and fixed with stainless steel wire staples complete all as specified and directed .

M&L aluminium alloy anodised sliding door bolt with hasp staple (bolt type) length 300mm fixed complete all as specified

M&L for applying two coats of synthetic enamel paint over a coat of red oxide , zinc chrome primer including preparation of new steel surface of any description over 10 cm width and girth complete all as specified.

M&L for two coats of synthetic enamel paint over a coat of pink primer including preparation of wooden surfaces exceeding 10 CM girth or width complete all as specified and directed.

M&L for preparation of old painted steel surfaces and applying one coat of synthetic enamel paint complete all as specified and directed.

S&F in repair vitreous china wash down water closet (pedestal pattern) with plastic seat and cover including PVC low level flushing cistern 10 ltrs capacity, and PVC 32MM dia flush pipe , complete as directed by Engr-in-Charge.

S&F in repair Vitrus china orissa pan squatting pattern 580 X 440mm with integeral foot rests including P or S trap, PVC low level flushing cistern 10 ltrs capacity connection to trap and to flushing pipe antisyphonage pipe including joint and good to floor high level or low level flushing cistern complete as directed.

S & F in repairs, vitreous china bowl urinal, white,half stall type, with grating & union for discharge pipe, complete inc. providing & fixing plugs, bedding urinal against wall in CM 1:2, inc. 60mm long brass screws, pointing around urinal back in cement, complete all as specified and as directed.

Supply & fixing in repair vitreous china wash basin with pedestal , white flat size 550x400mm incl bracket cutting for and pining in ends of brackets or erecting stand including PVC connection pipe 15 mm bore 450 mm long , waste coupling of PTMT , PVC waste pipe complete all as specified and directed.

S & F in repair 15mm bore Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repairs concealed stop cock but fancy type 15mm dia, chromium plated with long shank and cup (concealed type).

S & F in repair 15mm bore dia. pillar taps (fancy type), cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete.

S&F in repairs PVC connection 15 mm dia and 600 mm long with both and nuts

S & F in repair 125mm size brass chromium plated shower rose with or without swivel joints including fixing to steel pipe or union fixed complete all as specified and directed.

S & F in repair tubular towel rail 20 mm dia ‘D’ type 60 cm long between flanges of brass chromium plated.

S&F in repairs stainless steel grating of 125 mm dia chromium plate grating for nahani traps with or without hole for waste pipe complete all as directed

Taking up or down 20mm dia steel tubing connection, including cleaning for refixing or removal to store

Taking up or down 25mm dia steel tubing connection, including cleaning for refixing or removal to store

S& F for 20mm bore CPVC pipe outer dia of pressure ratings 11 SDR-II including all fittings fixed complete to walls, ceiling or in floor etc

S& F for 25mm bore CPVC pipe outer dia of pressure ratings 11 SDR-II including all fittings fixed complete to walls, ceiling or in floor etc

Cutting chases in PCC block walls for concealed water tubing etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed by engineer- in- charge.

S&L in repairs PVC floor trap with grating incl jointing to waste pipe with dia of outlet 75mm complete all as specified and directed.

Demolition and beaking up drain AC pipes/PVC pipes/CI Pipes set in cement mortar of any dia and size complete all as specified and directed.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls bore of the pipe 110 mm complete all as specified and as directed.

S&F PVC (SWR) bends 110 mm complete all as specified and directed.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls bore of the pipe 75 mm complete all as specified and as directed.

S&F PVC (SWR) bends 75 mm all as specified and as directed.

Supply and fix in repair 110 mm bore PVC (SWR) junction single ( single 'T') equal or unequal complete all as specified .

Supply and fix in repair 110 mm bore PVC (SWR) Vent Cowl complete all as specified and as directed .

M & L in repair for high density pipe 40 mm dia (HDPE) pressure rating 6 Kg / Sqcm fixed to wall and floors etc complete fixed all as specified and as directed.

S&F in repair angle valves cast copper alloy, screwed down high pressure fancy type chromium plated 15 mm dia with long shank and cup (concealed type) all as directed.

Dismantling water tanks of exc 500 but n.exc1000 ltr capacity complete all as specified and directed.

S&F of rotational moulded poly thylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position of capacity 1000 Ltrs complete all as specified and directed.

S&F in repairs for providing 20mm dia CPVC gate valves screwed both ends for iron pipes

S&F in repairs for providing 25mm dia CPVC gate valves screwed both ends for iron pipes

S&F in repair 20 mm Ball brass valves. high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule complete all as specified and directed.

S&F in repair 20mm dia CP Decorative type drapery curtain rods with brackets of approved quality complete all as specified and as directed .

Supply and fix in repair CP health faucet with 01 Mtr tube and hook complete all as specified and as directed .

S&F in repairs 1mm thick Stainless steel sinks with drainage board in kitchen with waste coupling, plugs, washers and waste pipe fixed on granite platform, over all size 915 X460mm bowl size 410mm X 330mm X 160mm complete all as specified.

Labour for drilling holes with drill machine with electric driven for gas pipe etc not exc 25 mm dia Upto 10cm depth in marble stone etc

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and as directed.

Dismanting asbests cement ( corrugated, semi-currugated etc.) sheets in roof covering upto a height of 8Mtrs including necessary scaffolding all as specified and directed

Dismantling wrought iron or mild steel work of any description not other wise provided for.

S & F roof trusses (framed) trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat section) including distance pieces cleats etc confirming to grade Fe-410 W E250 quality A upto a height of 8Mtrs including necessary scaffolding all as specified and directed.

Demolition wall and ceiling boards ( fiber pulp insullation etc ) or insullation boards / slabs, blankets any thickness including cover fillets upto a height of 8Mtrs including necessary scaffolding.

S & F Anodised aluminium snap grid frame work for false ceiling all as specified of grid size 605 X 605mm upto a height of 6Mtrs including M & L Hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified upto a height of 8Mtrs including necessary scaffolding including all as specified and directed.

S & F 4mm thick non asbestos fibre cement buildings 'E' boards fixed or laid/inserted to timber/GI/aluminium frame work in ceiling complete all as specified and directed upto a height of 8Mtrs including necessary scafholding and formwork.

M & L providing cement concrete type B-1 1:2:4 (20mm graded stone aggregate) as in roof curves or muds, stops, rounded or chamfered on edges complete all as specified and as directed.

S&F 16 mm bore CPVC pipes SDR 11 pipes & Plain CPVC SDR 11 fittings and fixed complete to walls and ceiling or laid in floors including taking down old 15mm GI Pipe complete all as specified and as directed

S&F 20MM steel water tubing medium grade galvanised with all fittings & fixing complete to walls & ceilings or laid in floors, including taking down old 20mm GI Pipe all as specified and as directed.

Taking down plastering on brick/ Stone walls etc including racking out joints, hacking for key, scrabing down with water etc upto a height of 8Mtrs including necessary scaffolding all as specified and as directed.

M & L 15mm thick rendering with as in CM 1:4 and finishing even and smooth without using extra cement for areas complete all as specified and as directed by Engineer-in-Charge Note: Patchwork upto a height of 8Mtrs including necessary scaffolding.

M & L for 15 mm thick rendering in Cement Mortar 1:6 on fair faces of Brick works or Concrete surfaces and finishing even and smooth without using extra cement Note: Patchwork upto a height of 8Mtrs including necessary scaffolding.

M & L Preparation of newly plastered surfaces of walls and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.

M & L for preparing new plastered surfaces of walls and applying 2 coats of OBD on new surface of walls incl 3mm thick wall care putty over a coat of Primer complete all as specified and directed.

M & L Preparation of Old plastered surfaces of walls and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.

Material and labour for complete removal of existing treatment on wall surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer over 03 mm thick wall care putty complete all as specified and directed. Note : Oil bound distemper will be done by Roller only, after complete removal of old loose flakes

Demolition of un reinforced cement concrete in ground floors and paving n.exc 15 cm thickness (below & above ground level) complete all as specified and as directed.

M & L providing cement concrete type B-1 1:2:4 (20mm graded stone aggregate) as in roof curves or muds, stops, rounded or chamfered on edges complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises complete all as specified and directed.

M&L Granite(of any type) 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platorms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite including 15mm thick screed bed and incl its dismantling complete all as specified and as directed.

Demolition of brick work or stone/boulders masonry built in Cement Mortar all as specified and directed.

M & L for chequered cement concrete tiles size 30cmx30cmx20-25mm thick set, jointed and pointed with grey cement and pigment including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L 75mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base of floor all as specified and as directed.

M & L for brick work in CM (1:6) using old size sub class 'B' bricks straight or curved on plan all as specified and directed.

Taking down shutters of any description n.exc 1.00 Sqm each all as specified and directed.

Taking down shutters of any description exc 1.00 Sqm and n.exc 2.00 Sqm each all as specified and directed.

Supply and fixing factory made solid panel Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC prelam Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing → and as directed by Engineer-in-charge.

S & F 2nd class hardwood plain, solid straight chowkhats and frames, wrought, framedrebated on the solid,rounded or chamfered, puttogether with glue pinned at joints, complete including treating theback of chowkats with coal tar black paint.

S &F 2nd class hardwood 35mm thick glazed and skeleton shutters open rebated and prepared to receive glass gauze etc divided into squares, with plain, chamfered or rounded mitred and rebated sash bars any number edges of framing plain, chamfered or rounded, fitted with cut and metered beads for securing glass etc size of members of shutters as specified in SSR Part I Sec 8 clause 8.20 (a)

M & L 35mm thick flush shutters, solid core constructions, with block board core and plywood face panels, commercial tyep on both sides all as specified and directed.

S&F anodized powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as peg stays 150mm long (1 No.), hinges type B-21 100mm long (2 Nos), suitable handle (1 No.) complete all as specified & as directed.

S & F aluminium daco Grills (DG 104) with F section Channel complete of 4mm thick for windows of aperture 50 mm complete all as spd and directed.

S & F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified and as directed.

S & F 200mm long Aluminium anodised, barrel tower bolts of extruded section and fixed all as specified and as directed.

S&F MS butt hinge 100mm long medium weight, mild cold rolled mild steel, and fixed complete all as specified and as directed

S & F stainless steel butt hinges 100mm long with stainless steel hing pin.

S & F 300mm long MS ordinary rat tail rod pattern springs including roller & roller plate complete all as specified and as directed.

S & F 4mm thick Sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane all as specified and directed.

S & F 4mm thick pin head type sheet glass ordinary quality fixing with putty in square n.exc 0.5 sqm all as specified and directed.

S & F Stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with galvanised wire staples all as specified and directed.

S & F fixed in repairs Stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with galvanised wire staples all as specified and directed.

S & F MS framed work such as grills or grating etc with ends of bars welded of anysize and any design all as directed of Fe-290 Grade E-165 all as specified and directed.

S & F mild steel flat iron hold fast of any size and similar articles conforming Fe 290 GradeE-165 all as specified and directed.

S & F in repairs Aluminium Powder coated Curtain rod 25mm dia with brackets and side knob and fixing etc complete all as specified and as directed.

S & F in repairs 15mm bore bib taps, brass chromium plated, screwed down, screwed for iron pipe or for brass ferrule including flench as in repair complete all as specified and directed.

S & F 15mm bore pillar taps brass chromium plated, screwed down, high pressure with or wihtout lettered hot or cold with long screwed shanks and fly nuts, screwed to iron pipe, fixed in repairs complete all as specified and directed.

S & F 15mm bore chromium plated angle cocks/stop valves brass, screwed down high pressure with crutch or butterfly handle, flench screwed both ends for iron or for union in repair complete all as specified and directed.

S & F in repairs 15mm Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repairs EWC Pedestal pattern WC ,any colour incl EWC seat Cover,10 ltr capacity PVC ,LLFC,32 mm dia PVC flush pipe including CP Toilet holder etc complete all as specified and directed.

S & F (in repairs) vitreous china, wash hand basin white size 550 x 400 mm including brackets, chromium plated waste coupling & PVC waste pipe of 32mm dia complete all as specified and directed.

S & F in repairs chromium plated 125mm shower rose with or without swivel joints any size including fixing to steel pipe or union all as specified and directed.

S & F in repairs 15mm bore concealed stop cock, chromium plated, cast copper alloy, screwed down with crutch or butterfly handle screwed both ends, as in repair including flench complete all as specified and directed.

S & F in repairs chromium plated towel rail 600mm long, 20mm dia of a approved quality, complete all as specified and directed.

Taking down PVC pipe any dia/type and setting aside for repair

S&F P V C (SWR) pipes of 110 mm bore single socketed in any length fixed to wall all as specified and directed.

S&F P V C (SWR) pipes of 75 mm bore single socketed in any length fixed to wall all as specified and directed.

Taking down PVC (SWR) fittings any type/dia viz bends, tee, branch piece etc

S&F 75mm PVC (SWR) floor trap plain with grating incl jointing with solvent cenment all as specified and directed.

S&F PVC (SWR) bends any radius 75mm bore provided with or without access door all as specified and directed.

Ditto-all as per item no 145 above but 110MM bore all as specified and directed.

S&F PVC (SWR) junction single, (Single T) equal or un equal 110 mm bore of any radius with access door all as specified and directed.

S&F 150mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. Fixed in floor of size 140mm all as specified and as directed.

M & L for Point wiring complete with two runs of 1.5 Sq mm (for Phase and neutral) PVC insulated unsheathed multi stranded, copper conductor FRLS cable of 1100V grade confirming to IS:694 1990 drawn through and including new non metallic rigid PVC conduit medium grade, ISI marked, 20 mm bore with conduit accessories concealed in wall /floor and fixed on ceiling/roof/truss/columns etc, including provision of factory made branded make embossed galvanised steel pressed terminal box of suitable sizes alongwith suitable size modular cover plate with frame for fiing Modular switches, sockets, fan regulators etc. concealed in walls and provn of 1.5 Sqmm PVC insulated unsheathed copper conductor cable of green colour to common earth dolly etc. complete all as specified and as directed for the following :- Note :- (1) The wiring shall be done in proper color coding using red, yellow, blue for phases, black for neutral and green for earth. (2) The cost of cutting of chases of required width and depth for concealled conduit incl plastering, making good to disturbed surface, painting two coats to match the existing wall colour is deemed to be included in the quoted rate by the contractor.

(a) One light point controlled by one modular switch 6A one way.

(b) One Ceiling fan / Exhaust fan point controlled by one modular switch.

(c) One 3 pin 6 Amps switch socket outlet point controlled by one switch on the independent board.

(d) One 3 pin 6 Amps switch socket outlet point controlled by one switch on the same board.

(e) One bell point controlled by one bell push.

M&L for Point wiring complete all as specified with 1100 Volts grade 4 Sqmm single core PVC insulated FRLS cable, multi stranded copper conductor confirming to IS:694 1990 with ISI marked (for phase, neutral and earth) in and including non-metllic rigid PVC conduit medium grade of minimum size 20 mm dia all accessories concealed including cutting/chases in wall/ceiling/fixed to wall/roof/columns etc and including factory made branded make embeded galvanised steel pressed terminal box for fixing Modular sockets of suitable size and earth wire to be connected to common earth dolley all s specified and as directed for One three pin Modular switch Socket 16 Amps outlet on independent board.

Supply and fix Modular switch 1 way 6A , 1-module complete all as specified & directed.

Supply and fix Modular switch 1 way 16A with indicator, 1-module complete all as specified & directed.

Supply and fix Modular socket, shuttered type, 6A - 3 pin 2 -module complete all as specified & directed .

Supply and fix Modular socket, shuttered type, 6/16A - combined 2-module complete all as specified & directed.

Supply and fix Modular Bell push 6A 1 module complete all as specified & directed by Engr in Charge.

Supply and fix Bell, Ding Dong AC. 230 volts, single pole

S & F ceiling rose three terminal surface bakelite type AC 50 Hz 230 volts of size 65 x 50 mm complete all as specified & directed.

S & F Vertical loadline type TPN DB 4 way double door with prov of MCCB as incoming 4P, made out of CRCA sheet housing duly powder coated & confirming to IS specification with busbar rating not less than 160 A complete all as specified & directed Note :- MCCB shall be measured and paid separatly.

S&F MCCBs 415V, 16KA, 100 amps 4 Pole suitable for DB complete all as specified & directed.

S & F in replacement sheet metal enclosure MCB DB SPN 8 way, 240 volts double door with locking system complete all as specified & directed .

S & F MCB SP 6 to 32 Amps 240 volts C- type all as specified and as directed

S & F RCBO double pole 30mA capacity 40 Amps 240 volts complete all as specified & directed.

S&F power unit for AC with 1 Nos of 20 A Socket (Including3 pin plug top 20 Amps ) 1 electronic starter 20 amps and 1 MCB SPN 20 A 'C' curve shall be fixed on one 6 module metal GI box with outer frame alongwith cover plate and electrical connection complete all as specified & directed.

M & L Submain wiring with 2 runs of single core 6 sqmm PVC insulated FRLS multistranded 1100 volts grade wire, copper conductor drawn through and including non-metalic rigid PVC conduit and conduit accessories of medium grade not not less than 25mm dia including one run of single core 6 sqmm PVC insulated sheated multistranded 1100 volts grade with copper conductor cable as earth continuty conductor along with the wiring and connected from DB to DB/main board including removing the existing unserviceable submain riwing complete all as specified & directed.

All as per Item Sl No-164 above but using 3 runs of single core 4 sqmm. (for Geyser point in all Md Accn)

All as per Item Sl No-164 above but using 3 runs of single core 1.5 sqmm. (for Bldg Security Lights)

Supply and fixing in replacement of LED batten light fitting 1x 20W, 220V, rated life 50000 burning hour type connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. Make : Cromption CCS-100-20-65-HSL2-DP-NWH/PHILIPS BN308CLED20S -6500L120PSUWH / WIPRO LL20-221-XX-65/ Havells ENDURALINERARPROBS20 WLED865PCSSIND

M & L for fixing only in repairs LED batten 20W

Supply and fixing in replacement of LED light fitting with high out put 2 feet, 10 watt 220 V AC rated life 25000 burning hours type with including connecting up with three core flexible copper conductor cable of suitable size complete. Make : Cromption CCS-103-10-65-SL-DP-NWH/PHILIPS BN021LED12S -6500K PSUGR / WIPRO LM34-101-XXX57WG2L/ Havells LHEXAZP7PN1W010

S & F 36 watt recess softline luminaire (2x2) suitable for armstrong/grid ceiling with high brightness white LEDs and PMMA extruded diffuser giving glare free light and good aesthetic appeal and all including taking down as directed. Make : Cromption CLCTLRP-36-FO-CDL / PHILIPS RC 308LED36S6500/Havells VENUSEXL2X2PLR36WLED865SWH / WIPRO-LC20-551-XXX-57G2XXXX42W

Supply and fix mounting engagement light (Green and Red colour) with 9 watt LED lamp,complete all as specified and directed.

S & F 15 Watt LED Bulb with lamp holder insulated body surface bakelite with back plate suitable for angle / batten fittings efficacy 100 Im/w and 5 star rated..

S & F decorative wall light fixture made up of polycarbonate suitable for wall mounted base complete all as specified and directed Make : Havells-FlorentineWL1LSB22SS-LHFOAJE1TZ1l060 or equivalent.

S & F In replacement of old unserviceable Building security light fitting IP 65 versatile pressure die-cast aluminium rated life 50000 burning hours with high power LED 35 W as light source complete with LED 35 W 5000K including brackets made out of GI pipe 25 mm dia light grade pipe bent to shape incl 02 Nos MS flate clamps incl nut bolts connection complete all as spd and directed . Make: Cromption TRP-409-45-57-SL-GL-NSG / Philips BRP030LED35CWSLRGRPSUV1 / Havells ENDURASUNDOWNSL45WLED765PASYBOPC/ WIPRO LR02-451-XXX-57-G1

S&F cable TV co-axial socket outlet point fixed to wall on hylam sheet complete all as specified and as directed

S&F cable Telephone socket outlet point fixed to wall on hylam sheet complete all as specified and as directed

S & F Rigid non-metallic PVC conduit and conduit accessories dia 20 mm dia, medium grade concealled in wall / ceiling for TV cable all as specified and directed.

M & L for Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings steps cills sun shades , shelves lintels etc, and cutting chases for concealed conduit wiring etc and making cutting not exc 10cm girth completeor chiselling the brick wall for a girth not exceeding 5cm in girth and not exceeding 10 m in width all as specified and directed.

M & L of Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground to a depth not less than 2.25 m below ground level with top edge of earth plate not less than 1.5 m below normal ground level connected to GI earth lead wire 4 mm dia by means of bolts, nut, check nuts and washers etc of galvanised iron and earth lead protected by provision of GI pipe 15 mm bore of medium grade from earth electrode to DBs/Main switch all as shown in Electrical Plate No 3 of SSR Part I and connected to main switch board including excavation and earth work in any type of soil, PCC chamber in 1:2:4 Type B-1 using 20 mm graded stone aggregate 75 mm thick RCC cover in 1:2:4 type B-1 reinforced with 6mm dia bars at 75mm c/c both ways with 12mm dia MS bar handle made to shape, 20 mm dia medium grade GI watering pipe perforated at bottom with funnel and wire mesh, common salt and charcoal filling complete including testing on completion all as specified (Note: GI pipe 15mm dia & GI earth lead 4mm dia upto 7.5 m length is deemed to be included in quoted rate).

Supply and fixing ceiling fans complete with blades, down rods and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated which can work on electronic regulator with copper winding motor (BLDC Fan) brushless direct current motor, colour as directed. Note :- The rate quoted deemed to be inclusive of taking down of existing old unserviceable Ceiling fan, transport and deposited at MES Store yard. Make : Gold Medal cat part No SCFS 500748 / Bajaj Cat Part No : ENERGOS 28 / Cromption Cat Part No : ENERGION RIVIRA / Havells Cat Part No : PRO 28 BLDC

Supply and fixing ceiling fans complete with blades, down rods and accessories, 230 V, 1400 mm sweep. Min air delivery 245 CFM with service value 6.00 BEE. Five star rated which can work on electronic regulator with copper winding motor (BLDC Fan) brushless direct current motor, colour as directed . Note :- The rate quoted deemed to be inclusive of taking down of existing old unserviceable Ceiling fan, transport and deposited at MES Store yard.

S & F Modular ceiling fan regulator 2 module step type AC 240 volt suitable for 1200/1400 mm sweep.

Supply and fix exhaust fan, metal body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified & directed . Make :Havells Cat part No : Ventil air DSB / Gold Medal EFS851012 HAVAC PLUS / Cromption drift air plus300mm/Bajaj-Supreme plus

Material and labour for cutting on wall in round shape using machine cutting (core cutting) only and making opening, at any height of required diameter suitable for mounting of 300 mm dia exhaust fan including suitable PVC sleeve to match with inside dia of hole and making good the disturbed surfaces plastering, matching with existing colour and clearing of all debries from work site complete all as specified and as directed. Note :- The rate quoted deemed to be inclusive of hiring of core cutting machine and required tool and mechaneries.

Taking down existing unserviceable point wiring of any description/type/ size of light/ fan/tube/power/two way/bell point etc on TW batten/conduit including removal of batten / conduit / gutties / wooden boards / switches / sockets / regulators/ light fittings etc and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes all as specified.

Taking down sheet metal enclosure, MCB DB incl MCBs from site and making good the disturbed surface of wall

Taking down old/perished sub main wiring of any size aluminium conductor cable along with TW batten/PVC conduit and making good the disturbed surface of wall all as directed.

Taking down old/perished GI earth wire and making good the disturbed surface of wall all as directed.

Taking down old/perished earth pits and making good the disturbed surface of complete all as directed.

Taking down light fitting and fixture of any type from wall/ceiling keeping the same safely till the completion of work and refixing and the fitting and fixture at the same location and making good the disturbed surface to match with the surrounding .

Supply and installationg, test and Commissioning factory fabricated outdoor type. LT FEEDER PILLAR BOX made out of 3.15 thick CRCA sheet of suitable size. With projected Globe roof for rain water protection Dust and Vermin proof, IP 65, Double door with both side opening including Neoprene Rubber Gasket, amp meter, volt meter CTs and control wiring, suitable for 440 Volt 3 Phase 4 wire System, including Danger Plate, Earthing Strip Point and Ventilation Louvers at Rear Side, Bottom detachable , Gland plate complete with suitable size Zinc Chromium Plated Nuts, Bolts and Washers etc. and embedded with 50x50x6mm Mild steel Angle Iron Frame and 600mm above the Normal Ground Level complete with internal connection with suitable size of cable, cable lugs and cable glands PCC foundation in Cement Concrete 1:3:6 (20mm Graded Stone Aggregate) and Testing after Installation complete all as specified and comprising of the following:- (a) Aluminium Bus Bar 400 amps - 04Nos, supported with suitable size of heavy duty porcelain stand lock with suitable size of brass nut, bolts and washer with heat shrinkable PVC sleeving. The bar shall be colour coded ( red, yellow and blue) for three phases and black for neutral. (b) MCCB 100 amps, 415 Volts, 25KA Breaking capacity 4 poole Electromagnetic release duly connected to Bus bar as IN COMING - 1Nos (C) MCCb 63 amps, 415 Volts, 16/18 KA Breaking capacity 4 pole Electromagnetic release duly connected to Bus Bar as OUTGOING - 03 Nos

MCCB 100 amps , 415Volts, 16/18 KA Breaking capacity 4 pole Electromagnetic release duly connected to CABLES in sheet enclosure as specified & directed.

MCCB 63 amps , 415 volts , 16/18 KA 3 Nos Breaking capacity 4 pole Electromagnetic release duly connected to CABLES in sheet enclosure as specified and directed

Supply and lay in trenches/fixed to walls/poles etc and commissioning XLPE insulated and PVC sheathed heavy duty LT 1100 Volts grade armoured under ground cable with aluminium conductor of 4 Core 25 Sqmm incl taking out of existing cable all as specified

All as per item no:195 above but 3.5 Core 50 Sqmm

Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr in depth; for trench of cable etc and getting out in hard soil complete all as specified and as directed.

M&L PCC 1:2:4 type B1 using 20 mm graded stone aggregate for coping of pole complete all as directed

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm in Soft/loose soil complete all as specified and as directed

Removing excavated material to a distance n.exc 50 mtr and depositing where directed at level n.exc 1.5 mtr above the starting point all as specified and as directed

S&F river sand for cable cursion laid in trenches complete all as directed by engineer'n charge Note punned thickness 23cm(6.25 cm below cable and 11.75cm above cable) will be measured for payment purpose. The earth removed during exevation to be used as riddle earth after crushing and sieving coated rate inclusive of all arrangements as mention.

M & L for brick protection cover of old size bricks common burnt clay building bricks sub class 'B' laid dry and flat abutting each other with width equal to length of brick and gap between adjacent bricks not exceeding 10 mm complete all as specified.

Supply, lay, commissioning and testing of cable jointing Kit for 1100 V grade cable for outdoor End termination heat shrink type joint complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 25 Sqmm, complete all as specified and directed

Supply, lay, commissioning and testing of cable jointing Kit for 1100 V grade cable for outdoor End termination heat shrink type joint complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 50 Sqmm, complete all as specified and directed.

Earthing complete with galvanised steel earth plate electrode 60x60cmx6mm thick, buried directly in ground(earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, cnnected to galvanised earth Gl strip 32x6 mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate no 3 connected to earthing test point all as specidied or indicated including testing on completion.

Supply, Installation, test and Commissioning factory fabricated, outdoor type, LT FEEDER PILLAR BOX made out of 3.15 mm thick CRCA Sheet of suitable size with projected Globe roof for rain water protection Dust and Vermin Proof, IP 65, Double door with both side opening including Neoprene Rubber Gasket,amp meter, volt meter CTs and controll wiring, suitable for 440 Volt 3 Phase 4 Wire System including Danger Plate, Earthing Strip Point and Ventilation Louvers at Rear Side, Bottom detachable Gland Plate complete with suitable size Zinc Chromium Plated Nuts, Bolts and Washers, etc. and embedded with 50X50X6mm Mild Steel Angle Iron Frame and 600 mm above the Normal Ground Level complete with internal connection with suitable size of cable, cable lugs. and cable glands PCC Foundation in Cement Concrete 1:3:6 (20mm Graded Stone Aggregate) and Testing after Installation complete all as specified and comprising of the following :- (a) Aluminium bas bar 200amps - 04 Nos, supported with suitable size of heavy duty porcelain stand lock with suitable size of brass nut, bolts and washer with heat shrinkable PVC sleeving. The bar shall be colour coded (red, yellow and blue) for three phases and black for neutral. (b) MCCB 100 amps, 415 volt, 25 KA Breaking capacity 4 pole Electromagnetic release duly connected to Bus Bar as IN COMING - 01 Nos Make: Legrand/Schneider/L&T/Hagar/ Havells or techno commercial equivalent as approved by GE. (c) MCCB 63 amps, 415 volt, 16/18 KA Breaking capacity 4 pole Electromagnetic release duly connected to Bus Bar as OUTGOING - 03 Nos

Supply, Installation, test and Commissioning factory fabricated, outdoor type, LT FEEDER PILLAR BOX made out of 3.15 mm thick CRCA Sheet of suitable size with projected Globe roof for rain water protection Dust and Vermin Proof IP 65. Double door with both side opening including Neoprene Rubber Gasket,amp meter, volt meter CTs and controll wiring, suitable for 440 Volt 3 Phase 4 Wire System, including Danger Plate, Earthing Strip Point and Ventilation Louvers at Rear Side, Bottom detachable Gland Plate complete with suitable size Zinc Chromium Plated Nuts, Bolts and Washers, etc. and embedded with 50X50X6mm Mild Steel Angle Iron Frame and 600 mm above the Normal Ground Level complete with internal connection with suitable size of cable cable lugs, and cable glands PCC Foundation in Cement Concrete 1:3:6 (20mm Graded Stone Aggregate) and Testing after Installation complete all as specified and comprising of the following Make: L&T/Schneider/Indo Tech/ any CPRI approved manufacturer. (a) Aluminium bas bar 400amps - 04 Nos, supported with suitable size of heavy duty porcelain stand lock with suitable size of brass nut, bolts and washer with heat shrinkable PVC sleeving. The bar shall be colour coded (red) yellow and blue) for three phases and black for neutral (b) MCCB 100 amps, 415 volt 25 KA Breaking capacity 4 pole Electromagnetic release duly connected to Bus Bar as IN COMING - 01 Nos (c) MCCB 63 amps. 415 volt, 16/18 KA Breaking capacity 4 pole Electromagnetic release duly connected to Bus Bar as OUT GOING - 02 Nos

Supply, Installation, test and Commissioning factory fabricated, outdoor type, LT FEEDER PILLAR BOX made out of 3.15 mm thick CRCA Sheet of suitable size with projected Globe roof for rain water protection Dust and Vermin Proof. Double door with both side opening including Neoprene Rubber Gasket, amp meter, volt meter CTs and controll wiring, suitable for 440 Volt 3 Phase 4 Wire System, including Danger Plate, Earthing Strip Point and Ventilation Louvers at Rear Side, Bottom detachable Gland Plate complete with suitable size Zinc Chromium Plated Nuts, Bolts and Washers, etc. and embedded with 50X50X6mm Mild Steel Angle Iron Frame and 600 mm above the Normal Ground Level complete with internal connection with suitable size of cable cable lugs. and cable glands PCC Foundation in Cement Concrete 1:3:6 (20mm Graded Stone Aggregate) and Testing after Installation complete all as specified and comprising of the following :- (a) Aluminium bas bar 200amps - 04 Nos, supported with suitable size of heavy duty porcelain stand lock with suitable size of brass nut, bolts and washer with heat shrinkable PVC sleeving. The bar shall be colour coded (red, yellow and blue) for three phases and black for neutral. (b) MCCB 100 amps, 415 volt, 25 KA Breaking capacity 4 pole Electromagnetic release duly connected to Bus Bar as IN COMING - 01 Nos (b) MCCB 63 amps, 415 volt, 16/18 KA Breaking capacity 4 pole Electromagnetic release duly connected to Bus Bar as OUT GOING - 04 Nos Make: Legrand /Schneider/L&T/Hagar/ Havells or techno commercial equivalent as approved by GE.

M/s GM Constructions (BID ID -3323260)

SRICO PROJECTS PVT LTD (BID ID -3323253)

SHAH ENTERPRISES (BID ID -3322836)

G SATISH REDDY AND CO (BID ID -3323240)

Mavee Syndicate (BID ID -3323199)

SAI RUPA CONSTRUCTIONS (BID ID -3323288)

K CHANDRAPAL REDDY (BID ID -3318371)