Ow repairs and maintenance to staff quarters at alampur jogulamba district 2025-26

Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge (25 mm average thickness)

Provision for Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge (Bars upto 12 mm diameter)

Providing Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Providing Grading roof for water proofing treatment with Cement mortar 1:3 (1 cement : 3 coarse sand)

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge. (In cement mortar)

Brick work with common burnt clay F.P.S. (non-modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:4 (1 cement : 4 coarse sand)

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in Charge. With cement mortar 1:4 (1 cement: 4 coarse sand)

Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in Charge. (Door chowkhats)

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10 mm to 25 mm.

Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). size of tile 500x500mm.

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Double charge vitrified tile polished finish of size Size of Tile 600 x 600 mm.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete as directed by the Engineer in charge.

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete as directed by the Engineer in charge.

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete as directed by the Engineer in charge.

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. (two coats)

Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately). 25mm thick

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws.

Sanitary fittings for toilets : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes(25mm), having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.

Sanitary fittings for toilets :Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes(20mm dia), having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

Sanitary fittings for toilets :Plumber

Sanitary fittings for toilets :Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge.

Sanitary fittings for toilets :Range of four urinal basins with 10 litre white P.V.C. automatic flushing cistern

Sanitary fittings for toilets :White Vitreous China Surgeon type wash basin of size 660x460 mm with a pair of 15 mm C.P. brass pillar taps with elbow including operated levers

Sanitary fittings for toilets :Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931

Sanitary fittings for toilets : PVC connection

Sanitary fittings for toilets Waste water pipe

Sanitary fittings for toilets :Parryware Two-way Bib cock G3334A1

Sanitary fittings for toilets :Parryware Cardiff pro with Hose and Hook (Spray Gun, Health Faucet) T9875A1

Sanitary fittings for toilets :Parryware Soap Dispenser

Sanitary fittings for toilets :Modiguard Mirror (1X2 ft) (Thickness 5mm)(beveling and fitting charges)

Sanitary fittings for toilets : 510x1040 mm bowl depth 250 mm

Supply and fixing of electrical items : 1" dia PVC pipe, 20' length iincluding cost of the labour, and also includes GST, and other applicable taxes if any etc. complete as directed by the Engineer in charge.

Supply and fixing of electrical items : PVC bend 1" dia iincluding cost of the labour, and also includes GST, and other applicable taxes if any etc. complete as directed by the Engineer in charge.

Supply and fixing of electrical items : 12 modular boards iincluding cost of the labour, and also includes GST, and other applicable taxes if any etc. complete as directed by the Engineer in charge.

Supply and fixing of electrical items :16 modular boards iincluding cost of the labour, and also includes GST, and other applicable taxes if any etc. complete as directed by the Engineer in charge.

Supply and fixing of electrical items : 8 modular boards iincluding cost of the labour, and also includes GST, and other applicable taxes if any etc. complete as directed by the Engineer in charge.

Supply and fixing of electrical items : 4 modular boards iincluding cost of the labour, and also includes GST, and other applicable taxes if any etc. complete as directed by the Engineer in charge.

Supply and fixing of electrical items : 2.5 sqmm approved quality pvc insulated wire [bundle] iincluding cost of the labour, and also includes GST, and other applicable taxes if any etc. complete as directed by the Engineer in charge.

Supply and fixing of electrical items : 1.00 sqmm approved quality pvc insulated wire [bundle] iincluding cost of the labour, and also includes GST, and other applicable taxes if any etc. complete as directed by the Engineer in charge.

Supply and fixing of electrical items : cross holders iincluding cost of the labour, and also includes GST, and other applicable taxes if any etc. complete as directed by the Engineer in charge.

Supply and fixing of electrical items : mcb box 8 module iincluding cost of the labour, and also includes GST, and other applicable taxes if any etc. complete as directed by the Engineer in charge.

Supply and fixing of electrical items : isolation 40v iincluding cost of the labour, and also includes GST, and other applicable taxes if any etc. complete as directed by the Engineer in charge.

Supply and fixing of electrical items : MCB switch 20amp iincluding cost of the labour, and also includes GST, and other applicable taxes if any etc. complete as directed by the Engineer in charge.

Supply and fixing of electrical items : MCB switch 16amp iincluding cost of the labour, and also includes GST, and other applicable taxes if any etc. complete as directed by the Engineer in charge.

Supply and fixing of electrical items : switches 10amp iincluding cost of the labour, and also includes GST, and other applicable taxes if any etc. complete as directed by the Engineer in charge.

Supply and fixing of electrical items : 5 pin socket 10amp iincluding cost of the labour, and also includes GST, and other applicable taxes if any etc. complete as directed by the Engineer in charge.

Supply and fixing of electrical items 5pin socket 20amp iincluding cost of the labour, and also includes GST, and other applicable taxes if any etc. complete as directed by the Engineer in charge.

Supply and fixing of electrical items : LED tube lights 20W iincluding cost of the labour, and also includes GST, and other applicable taxes if any etc. complete as directed by the Engineer in charge.

Supply and fixing of electrical items : LED Bulbs 9W iincluding cost of the labour, and also includes GST, and other applicable taxes if any etc. complete as directed by the Engineer in charge.

Supply and fixing of electrical items : 1.5" dia PVC pipe, 20' length iincluding cost of the labour, and also includes GST, and other applicable taxes if any etc. complete as directed by the Engineer in charge.

Supply and fixing of electrical items : Electrician iincluding cost of the labour, and also includes GST, and other applicable taxes if any etc. complete as directed by the Engineer in charge.

Supply and fixing of electrical items : Mazdoor

Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns as per CPWD Specification 2019, to be laid in true horizontal level suspended on inter locking metal T-Grid of hot dipped galvanized iron section of 0.33 mm thick (galvanized @ 120 grams per sqm including both sides)comprising of main-T runners of size 24x38 mm of length 3000 mm, cross - T of size 24x32 mm of length 1200 mm and secondary intermediate cross-T of size 24x32 mm of length 600 mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 12x50 mm long dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 76x25x25x1.6 mm fixed with grid and Z cleat of size 25x37x25x1.6 mm thick with precut hole on both 25 mm flange to pierce into 12x50 mm or even bigger size dash fastener if require, fixed with Glavanised iron perimeter wall angle or size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.

Provision of providing Seling of cracks with 15 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade

Polishing on wood work with ready mixed wax polish of approved brand and manufacture

Please Enable Macros to View BoQ information