NIT 04/SE/2020-21 LOT-08

Amount

Construction of granular sub-base providing well graded material, spreading in uniform layers with motor grader on prepared surface mixing by mix in place mathod with rotavator at OMC and compacting with smooth whell roller to achive the desired density complete as per technical specification clause 401

Providing, laying spreading and compaction stone aggregates of specification sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 KN in stages to proper grade and camber, applying and brooming stone sceeing/binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density Grading-2 as per technical specification clause 405

Providing, laying spreading and compaction stone aggregates of specification sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 KN in stages to proper grade and camber, applying and brooming stone sceeing/binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density Grading-3 as per technical specification clause 405

Providing and applying primer coat with slow setting bitumen emulsion on prepared surface of Granular base including cleaning of road surface and spraying primer @ 0.70 kg. per Sqm. On the prepared bituminous surface as per technical specification clause 502

Providing and applying tack coat with VG-10 using emulsion distributor at the rate of 0.25 kg. per Sqm on the perepared bituminous surface cleaned with Hydralic as per technical specification clause 503

Providing, laying and rolling of open-graded premix surfacing of 20 mm thickness compossed of 13.2 mm to 5.6 mm agregates either using penetration grade bitumen or cut-back or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a smooth wheeled roller 80-100 KN static roller capacity, finished to required level and grades to be followed by seal using Type 'C' as per technical specification clause 510

Providing and laying seal coat sealling the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per Technical specification clauses 510

Providing & fixing brick edging on both side of road with first class brick 8 cm wide and 12 cm deep laid with mud mortar including all material, labour T&P complete.

SANTOSH KUMAR

Shyam Lalit Dubey

RAM KUMAR MAURYA

J M D CONSTRUCTION AMD SUPPLIAR

SHREYA CONTRUCTION