Special repairs to the existing toilet in first floor of TNCSC Regional office building at Gopalapuram in Chennai City.

Dismantling AC Sheet roofing without roof timber and clearing away and carefully stacking materials useful for re-use as directed by the departmental officers.

Dismantling the Floor finishing and Dadooing with mosaic tiles, glazed tiles and cuddalpah slab and clearing away and carefully stacking materials useful for re-use and as directed by the departmental officers.

BRICK WORK in cement mortor 1:5(one cement, five sand) using best quality Country bricks of size 8" 3/4"x4 ¼ x 2 ¾ “ for walls including cost of scaffolding curing, finishing etc., complete complying with standard specification and as directed by the departmental officers.

PLASTERING with cement mortor 1:5 (one cement and five sand) 12mm thick including cost of scaffolding, finishing, curing etc., complete complying with standard specification and as directed by the departmental officers.

PLASTERING with cement mortor 1:3 (one cement and three sand)10mm thick including cost of scaffolding, finishing, curing etc., complete complying with standard specification and as directed.

Brick jelly Cement Cconcrete 1:5:10(one cement, five sand and ten broken brick jelly)using 20mm gauge broken brick jelly for foundation including mixing by mechanical means de-watering side shuttering, strutting, wherever necessary including curing etc., complete complying with standard specifications and as directed

Supplying fabricating, hoisting and erection of ROOF TRUSSES PURLINS AND WIND BRACING with structural steel member like angle and channel iron and M.S.plates for all truss, purlin members including all cutting drilling holes, and welding and fixing of member with necessary bolts and nuts, of approved quality and hoisting, aligning and placing the trusses in position etc., complete the trusses will be manufactured as per the detailed plan. The rate should include the cost of painting with one coat of red oxide primer with two coats of best quality of aluminium paint over priming coat.

Supplying and laying of High profile colour galvalume sheet (as per ISI Standard) with combination 55A1:43 4Zn:1:6SI of TCT bent type 0.47mm thick not less than 150 GSM and standard width of 1.06m with yield strength of 550 MPA made from high tensile/ CR sheets of approved quality for roofing with necessary fixing arrangements like 65m and long hexagonal head screws with EPDM rubber seal etc., complete, complying with standard specification and as directed by the departmental officer. (Test certificate for quality should be furnished on receipt of material at site)

Paving the flooring with best quality double charged vertified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three sand) 20mm thick in all floors and the top pointed with the white cement mixed with same colour pigments etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)