REPAIR/MAINT WORKS AT GB 13 AND CULVERTS, HUME PIPE, FENCING, GATE AT AF STN GWALIOR

Amount

Ploughing to existing target area with any type of sand /soil and filling crater of any size and depth with mechanical devices or manually, spill cross (Double) or both way complete including removal of all bushes grass and leveling all as specified and directed by Engineer -in-charge. Notes :- (a) For ploughing to existing ground of both side (i. e one side and cross) shall be measured as one complete operation. (b) Weekly one time or as required by user. (c) Filling the crater by locally available soil which is obtained from crater.

M&L for PP (poly propylene) woven bag of bright white colour 30 Kg capacity (Approx) by filling with sand/soil and laying at site as per user requirement complete including removing old deteriorated bags from site out of defence land all as specified and directed by Engineer-in-Charge. Note :- Sand / Soil for filling is available at site. Notes for item No 1 & 2 :- (a) The work will be executed as and when required by users. (b) The Contractor will be informed 24 hrs prior to commence the work and he should be ready for execution of work . Any denial will not be acceptable. (c) The site is located approximately 3 Km away from main road (inside the forest area) and approach way is full of thick Vegetation /bushes/ undulating grounds etc. The bidder are requested to visit location of site with consultation of AGE B/R-I and quote the rates accordingly . (d) Contractor shall start the work after approval of Air Force authority.

Dismantling of posts, struts ( RCC or steel ) any section including taking out embedded portion in concrete at any position place incl swan neck fencing with old and making good disturbed portion removing excavated debries up to a distance n.exc 50M complete all as specified and as directed by Engr-in-Charge.

M&L for precast RCC fencing posts (rypr B-1 1:2:4 (using 20 mm graded aggregate), struts etc. for fencing, average sectional area exc 100 sq. cm, but n exc 200sq. cm with or without chamfered angles and flat, splayed, rounded or mitred tops as directed and fixed.

Demolition of reinforced cement concrete (reinforced) of any description and in any position not otherwise specifically provided and dispose off the demolished material out of defence land complete all as specifeid and directed.

M&L for RCC 1:2:4 type B-1 (using 20mm graded crushed stone aggragate) as in foundations, footings, plinth beams, bases for columns, etc. and mass concrete complete all as specified and directed. Note : Reinforcement and formwork will be measured and paid separately under respective item of BOQ.

M&L for RCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in column, wall, etc complete all as specified and directed. Note : Reinforcement and formwork will be measured and paid separately under respective item of BOQ.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar complete all as specified and directed

Formwork to sides of pillars, posts, wall, struts, piers, columns and stanchions complete all as specified and directed.

Material and Labour for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking bending spirally for hooping for column,, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, etc complete all as specified and directed.

All as per item No 10 here-in-before but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for including removal and disposal off the demolished material out of defence land complete all as specifeid and directed.

M&L for 600mm bore reinforced concrete pipes class NP-3 ,laid and jointed complete with collars complete all as specified and directed including dismantling of old RCC pipe & necessary excavation complete all as specified and directed.

M&L for PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in flooring /Hardstanding, coping, haunching, plinth courses, string courses, lacing courses, etc complete all as specified and directed. Note : If Reinforcement included the same will be measured separately.

Demolition of brick work or stone masonry of any description and in any position built in cement mortar including all quoins, arches pillar etc including disposal of rubbish complete all as specified and directed.

M&L pre-cast PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) cement concrete block masonry with solid blocks exc. 10cm in width and set in cement mortar 1:6 complete all as specified and directed.

M & L rendering 15 mm thick CM 1:6 on brick or concrete surfaces finished even and smooth with out using extra cement complete all as specified and directed

M & L for Forming embankments including raising (or lowering) earth, spreading in layers n exc. 30 cm thick and finishing to required size, shape, etc. up to a height of 8.0 mtr high from base complete all as specified and directed.

M & L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering and all as specified and directed.

S&F in repairs galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails, straining bolts including securing or tying at crossing with and including galvanised MS wire, staples or steel pin etc complete all as specified and directed. Note :- Each line of wire to be measured.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed

M&L for Framed work as in doors or gates of angle or other tubular hollow sections with necessary welding, cutting jointing, drilling holes etc guide rails, braces, etc using MS plate /MS sheet to be prepared for hanging or sliding gates and including hooks, purpose made hinges, hold fasts etc complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of steel of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide primer complete all as specified and directed.

M S BUILDERS

SHRI RAM CONSTRUCTION

BEHL CONSTRUCTION CO

M/s Gulshan and Brothers

M/s NILAY ENGINEERS

lodhi builders

M/S YOGANSH CONSTRUCTION CO.

M/S LAKSHYA CONSTRUCTIONS