Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.4 LAccepted-AOC 46 HUSENI LAKDA BAZAAR 242 BELLASIS ROAD MUMBAI 400008 | MUMBAI | MAHARASHTRA | 400008 | L1 | Accepted-AOC L1 | |
| 2 | L2₹35.0 L+₹2.6 L (7.93%)Rejected-Finance NOT AVAILABLE | FARIDABAD | HARYANA | 121004 | L2 | Rejected-Finance Not Reasonable | |
| 3 | L3₹37.1 L+₹4.6 L (14.3%)Rejected-Finance NOT AVAILABLE | L3 | Rejected-Finance Not Reasonable | |
| 4 | L5₹39.1 L+₹6.7 L (20.6%)Rejected-Finance A 303 SHREE KRISHNA COMPLEX CO OP HSG SOC LTD WESTERN EXPRESS HIGHWAY OPP NATIONAL PARK BORIVALI E MUMBAI 400066 | MUMBAI SUBURBAN | MAHARASHTRA | 400066 | L5 | Rejected-Finance Not Reasonable | |
| 5 | L6₹41.6 L+₹9.2 L (28.4%)Rejected-Finance | L6 | Rejected-Finance Not Reasonable |
Tender Value
₹44 L
EMD Value
₹88,000
Closing Date
24 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Saurabh Gupta, EE
GE(W) Colaba, Mumbai
STRUCTURAL REPAIRS TO CERTAIN BLDGS AT AREA -II AND AREA-III UNDER AGE B/R (CENTRAL) UNDER GE (W) COLABA, MUMBAI
2022_MES_572033_1
8704/E8
Open Tender
Civil Works
Item Rate
180 days
GE(W) Colaba
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE(W) Colaba, Mumbai
₹88,000
Yes
31 Jan 2023
29 Dec 2022
26 Jan 2023
29 Dec 2022
24 Jan 2023
11 Jan 2023
Amount
Providing and erecting horizontal industrial safety net as per IS 11057- 1985, made out of polypropylene rope as per IS 5175: 1992, mesh size 75 mm X 75 mm, border cord 12 mm, tie cord 12 mm, mesh cord 4 mm including overlay with HDPE net to catch personnel and debris and keeping the same during the period of work and including dismantling and taking away after completion of the work all as specified and as directed by Engr-in-Charge.
Providing and erecting vertical scaffolding unserviceable net (debris net), made out of high density polyethylene for dust and debris control and keeping the same during the period of work and including dismantling and taking away after completion of the work all as specified and as directed by Engr-in-Charge.
Providing, erecting and subsequently dismantling temporary GI sheet /plywood portions with 2.00 metre high fixed on bamboos/wooden post etc. within the premises so as to isolate the living area from working area and taking away all materials all as specified and as directed by Engr-in-Charge.
Identifying and marking carefully the damaged reinforced concrete by tapping with light hammer and chipping of unsound weak concrete and plaster material from slabs/beams/columns etc. with power/hand driven chisel as directed by the engineer-in-charge upto 25 mm average depth including saw-cutting of all edges making square shoulders of the cavities all as specified and as directed by Engr-in-Charge. Note:- (i) All loose unsound and cracked concrete shall be removed out side MD land (ii) Thickness will be measured excluding plaster
Identifying and marking carefully the damaged reinforced concrete by tapping with light hammer and chipping of unsound weak concrete and plaster material from slabs/beams/columns etc. with power/hand driven chisel as directed by the engineer-in-charge upto 40 mm average depth including saw-cutting of all edges making square shoulders of the cavities all as specified and as directed by Engr-in-Charge. Note:- (i) All loose unsound and cracked concrete shall be removed out side MD land (ii) Thickness will be measured excluding plaster
Identifying and marking carefully the damaged reinforced concrete by tapping with light hammer and chipping of unsound weak concrete and plaster material from slabs/beams/columns etc. with power/hand driven chisel as directed by the engineer-in-charge upto 60 mm average depth including saw-cutting of all edges making square shoulders of the cavities all as specified and as directed by Engr-in-Charge. Note:- (i) All loose unsound and cracked concrete shall be removed out side MD land (ii) Thickness will be measured excluding plaster
Cleaning loose concrete, if any, all around reinforcement including from behind the reinforcing bars to give an average 10 mm thick (but not less than 10 mm clear air gap) and cleaning reinforcement of total rust using alkaline rust remover with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washed with water and allowing it to dry and applying two coats of epoxy based passivating, protecting & bonding coat of zinc rich system (Nitozinc (R) primer of Fosroc and equivalent of SIKA/Dr Fixit Pidilite/ Krishna Conchem) as approved by the Engineer-in-Charge, with mixing and applying SBR latex modified cementitious bond coat using cement 2.2 kg per square metre on prepared concrete surfaces of parent material as approved by Engr-in-Charge for old and new reinforcement of any dia complete all as specified and as directed by Engr-in-Charge. Make- SBR latex from FOSROC/SIKA/Dr Fixit / BASF as approved by the Engineer-in-Charge
M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips including welding has to be done with minimum 20 cm over lap for new and Old unserviceable of any height all as specified and as directed by Engr-in-Charge.
M&L for mild steel TMT bars 6 to 10 dia as in stirrups, spaces and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips all as specified and as directed by Engr-in-Charge.
M&L for plastering 20-25mm thick (Average thickness) Ready Mix Polymer modified cement mortar in two coats, 15mm base coat and subsequent finishing coat with and including curing as per manufacturer's instruction all as specified and as directed by Engr-in-Charge. Make- Dr Fixit Repair Pro Polymer Mortar, FOSROC-RENDOROC S2-structural grade Polymer Mortar, Shalifix FRM Polymer Modified Fibre Reinforced Mortar of STP
Providing and placing in position micro-concrete, grade M-40, which shall be cement based prepacked single component, chloride free, non-shrink, free flow, self compacting, ready to use after mixing water in specified proportion, obtained from Fosroc / SIKA / BASF/ Dr Fixit, thickness of section upto 75 mm all as specified and as directed by the Engineer in charge Note:- Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/tapping with a blunt metal instrument
Providing and placing in position micro-concrete, grade M-40, modified with aggregate which shall be cement based prepacked single component, chloride free, non-shrink, free flow, self compacting, ready to use after mixing water in specified proportion, obtained from Fosroc / SIKA / BASF/ Dr Fixit, thickness of section more than 75 mm all as specified and as directed by the Engineer in charge Note:- Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/tapping with a blunt metal instrument
M&L RCC M30 grade (Design Mix) using 20 mm graded crushed stone aggregate works as in columns, foundations, beams, slabs, parapet, staircase etc. complete all as specified and as directed by Engr-in-Charge
Providing and fixing special water tight centering and shuttering including bolting, strutting, propping etc. so as to withstand a pressure of 0.1 Mpa including removal of form work all locations of beams, columns, slabs, walls, foundations, footings, landings, stairs, balconies etc. complete all as specified and as directed by Engr-in-Charge.
Taking down cement plaster on brick or stone/concrete surfaces, etc. on internal/external surface of wall/ceiling including raking out joints, hacking for key, scrubbing down with water to receive plaster and removing debris out side MD land and M&L 15-25mm thick Ready Mix Plaster in multi layer of make / brand - ACC's Accoplast / CK Birla's Aerocon / Speed Dry Mix's Ecoplaster / Magic Plast / Build well, mixed with liquid water proofing compound on other than fair faces of brick wall or concrete surfaces, (upto four storeys of bldgs) including use of steel scaffolding unserviceable all as specified and as directed by Engr-in-Charge. Note :- Liquid water proofing compound will be measured and paid seperately as supply only
All as per item No 15 above but for portion of building from five to eight storeys,
All as per item No 15 above but for portion of building from nine to fourteen storeys,
Supply only liquid water proofing compound. Make - Plastocrete of Sika/Pidiproof LW of Pidilite.
Taking down cement plaster on brick or stone/concrete surfaces, etc. on internal/external surface of wall/ceiling including raking out joints, hacking for key, scrubbing down with water to receive plaster and removing debris out side MD land and M&L 12 mm thick ready mix plaster in single layer on brick wall or concrete surfaces including making groove of appropriate size, on other than fair faces of concrete/brick surfaces(internal surface) and finished even & smooth without using extra cement all as specified and as directed by Engr-in-Charge. Name of Manufacturer: M/s ACC accopalst/CK Birla Aerocon/Premier Floor to Roof Materials pvt. ltd/ M/s Walplast Products pvt. ltd/ M/s Ultratech Cement Ltd/M/s Sound buildcare pvt. Ltd/ or other approved equivalent mak
M&L for removing old unserviceable loose spalled concrete, chiseled from roof ceiling with the help of scrapers, chisel & hammer, cleaning of rust from mild steel rod, applying cement slurry spray 3.00 kg per sqm by paint brush over cleaned surface and thereafter rendering 20-50mm thick ready mix plaster in multi layer for ceiling on brick wall or concrete surfaces including making groove of appropriate size and finished surfaces even & smooth without using extra cement including applying three coats of white wash all as specified and directed by Engr-in-Charge. Name of Manufacturer: M/s ACC accopalst/CK Birla Aerocon/Premier Floor to Roof Materials pvt. ltd/ M/s Walplast Products pvt. ltd/ M/s Ultratech Cement Ltd/M/s Sound buildcare pvt. Ltd/ or other approved equivalent make.
M&L for preparing newly plastered surfaces of walls / ceilings by scrapping / rubbing down and applying two coats of Anti-fungal, dust resistant, water repellant, crack-bridging, weather proof type (Ist quality), exterior Acrylic Emulsion paint (100% Acrylic) Base coat of Apex ultima of Asian Paints, protek duralife and top coat of Apex Ultima protek, over a coat of "Trucare" exterior wall primer, through authorized applicator only including use of steel scaffolding unserviceable upto 04 story of bldg all as specified and as directed by Engr-in-Charge. Make: Asian Paints Ultima Protek or equivalent of Berger Paints ( Weather Coat All Guard) / Nerolac (Excel Top Guard) / Dulux Paints ( Dulux Weather shield Max) as approved by GE.
All as per item No 21 above but for portion of building from five to eight storeys,
All as per item No 21 above but for portion of building from nine to fourteen storeys,
M&L for preparation of newly plastered surfaces of walls & applying two coats of oil bound distemper over a coat of alkali resistant priming paint over 1mm thick (average thickness) wall care putty including rubbing with sand paper through authorised applicator of paint manufactures only of approved shade all as specified and as directed by Engr-in-Charge
M&L for preparation of plastered surfaces of wall including complete removal of existing treatment and applying two coats of oil bound distemper over a coat of alkali resistant priming paint over 1mm thick (average thickness) wall care putty including rubbing with sand paper through authorised applicator only of paint manufactures only of approved shade all as specified and as directed by Engr-in-Charge. Make for Item No. 24 & 25:-"Tractor Uno" of Asian paint/'Jadoo' of Berger paint/ Nerolac beauty of Nerolac paint as approved by GE
Dismantling floor hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish out side MD land all as specified and as directed by Engr-in-Charge.
M&L non skid coloured ceramic tiles, joint free, conforming to IS-13755, group B II (b) , 1st & premium quality, Digital coloured ceramic tiles, 300mm x 300mm x 6-7 mm thick in floors, shelves etc, set and jointed in neat cement slurry and pointed in coloured cement to match the shades of the tiles laid over and including screed bed of 15mm thick in CM (1:6) all as specified and as directed by Engr-inCharge
M&L non skid coloured ceramic tiles conforming to IS-13755, group B II (b) , 1st & premium quality, Digital coloured ceramic tiles, 600mm x 600mm x 7-8mm thick in floors, shelves etc, set and jointed in neat cement slurry and pointed in coloured cement to match over and including screed bed of 15mm thick in CM (1:6) all as specified and as directed by Engr-in-Charge.
M&L for non skid coloured ceramic tiles conforming to IS-13755, group B III , 1st & premium quality, Digital coloured ceramic tiles, 600mm x 600mm x 7-8mm thick in vertical surfaces (including designed borders ) such as skirting and dados set and jointed in neat cement slurry pointed in coloured cement to match the shades of the tiles, laid over rendering 10 mm thick on fair faces of brick work in CM (1:4) all as specified and directed. Note:- Rate of Designer border in vertical surface will be deemed to be included in quoted rates.
M&L for glazed coloured ceramic tiles conforming to IS-13755, group B III , 1st & premium quality, Digital coloured ceramic tiles, 600mm x 300mm or 405mm x 250mm x 6-7mm thick in vertical surfaces (including designed borders ) such as skirting and dados, set and jointed in neat cement slurry pointed in coloured cement to match the shades of the tiles laid over rendering 10 mm thick on fair faces of brick work in CM (1:4) all as specified and as directed by Engr-in-Charge Note:- Rate of Designer border in vertical surface will be deemed to be included in quoted rates). Make for Item No. 27 to 32: M/s H R Johnson/M/s Kajaria/M/s Somany Tiles Ltd/M/s Nitco tiles
Dismantling of stone slab flooring including cement mortar bedding (but not backing) and removing serviceable tiles from site all as specified and as directed by Engr-in-Charge
M&L for Diamond cut kota stone slab flooring 20-25 mm thick (bull nosing with three antiskid grooved) over cement screed bese laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to mirror finish inluding screed bed or bedding layer of mortar 15 mm thick in CM (1:6) for laying floor finishes all as specified and directed.
All as per Item above item No 32 above but in riser of steps, skirting, dado and pillar laid over cement screed and jointed laid over rendering 10 mm thick on fair faces of brick work in CM (1:4) all as specified and directed.
M&L granite tiles (of any type and colour), 20mm thick machine cut, set, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing laid over and including screed bed in cement plaster 20 mm thick in CM 1:4, as in kitchen platform, jamb/cill of window, ventilator, border, flooring and simillar work etc complete all as specified and as directed by Engineer-in-Charge
M&L for machine cut cuddapa stone slabs 20-25 mm thick, laid over and including 15 mm thick screed bed in cement mortar (1:6) or rendering coat vertically of 10mm thick in CM 1:4 and jointed with grey cement slurry, mixed with pigment to match the shade of the slab including rubbing, polishing & rounding of edge on one side of the slab, cutting hole complete all as specified and as directed by the Engineer-in-Charge.
ASHOK CONSTRUCTION
SHREE JAGDISH FURNITURE CO.
Nilesh Construction
PRABHU ASSOCIATES
Bidder Name
Unitech Enterprises
Nilesh Construction
ASHOK CONSTRUCTION
PRABHU ASSOCIATES
SHREE JAGDISH FURNITURE CO.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .