Construction of Aspirationa...

Amount

Providing and fixing Indian make hand dryer including the cost of gutties, screws, Electric wire, 3 pin top 5 amp Complete in all respects. (NSI)

Providing and fixing small PVC dust bins with Lid of superior quality in ladies and gents toilet complete in all respects as per satisfaction of E.I.C. (NSI)

Providing and fixing LED tube light 4 x 1 x 40 watt type including connections, wire complete in all respect

Making suitable size wall niche minimum 2`-0`x 3`-0` including cement plastering from inside of niche, wooden plank for sheet metal, iron clad switch gear including the cost of PVC shutter with locking arrangement, Chowkhats complete in all respects.

Providing and fixing 50 Watt LED flood light with bracket outside on the wall complete in all respects.

Providing and fixing of shoes polish machine of reputed make

Providing and fixing Sanitary Napkin and Facemask Incineration Machine 50 peieces/day

Providing and painting of apex outside the toilet

Providing and Placing PVC mat 15mm thick

Providing and Placing PVC POT (Gamla) size 18``, 12`` Dia Green in Colour including decorative plant

SITC of Feedback mechanism in Toilet

Informatory sign board 600x600 rectangular as per IRC 67- 2012 with retro reflective Sheeting as per ASTM D 4956 09 and as per IRC 67 2012 fixed over 3 mm thick aluminium Composite material (ACM) sheeting having aluminium skin thickness of 0.4 to 0.5 mm on both sided and fixing the same with suitable size aluminium alloy rivets @ 200 mm c/c to back support frame of 25x25x3mm angle iron supported on a square hollow steel section post 60x60x3.2mm conforming to IS 4923 without cost of definition plate firmly fixed to ground in foundation concrete M-25 of size .45x0.45x0.75m for vertical post complete as per dause 801 of MORTandH specifications. Supplier shall provide a warranty as per clause 6.9 of IRC 67-2012 for retro reflective sheeting anda certified copy of test reports from an indepe plus B131ndent test laboratory including three year outdoor weathering test report for sheeting tested in India condition to clause 6.7 of IRC 67-2012

Providing and fixing to the inlet mouth of rain water pipe PTMT (an Engineering Thermoplastic) grating square (Slit) 150 mm square with a height of 8 mm and weighing not less than 100 gms.

Providing and fixing PTMT Bottle Trap for Wash basin and sink. Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms

Providing and Installation of Rainwater Harvesting System complete in all respects i/c 1000 ltr tank, CPVC connections pipes from RWH Tank to Overhead Tank with fixtures and ball valves, 100 mm: inlet pipe with filter and their connections, SITC of Submersible Pump Set of 0.5 HP etc. as per the directions/satisfaction of Engineer In-Charge

Supply, Installation, Testing and Commissioning of 1KW Solar System complete in all respects (NSI)

Stainless Steel Sign Board for identification of Toilet Units as per the satisfaction of Engineer-In Charge (NSI)

Providing and Installation the ISI marked (Capacity 02 Kg each) ABC Type Fire Extinguishers complete in all respects as per the satisfaction of Engineer-In-Charge (NSI)

T-Base for Overhead water tanks

Cleaning Equipments and Consumables

Bidder Name

Amount

THE A.S BROTHERS CO-OP L&C SOCIETY LTD LAKARIA (GSTN-06AAKAT2235R1ZX) BID ID -1259629

THE JAGSHANTI COOP LC SOCIETY LTD (GSTN-NA) BID ID -1259633

THE A.S BROTHERS CO-OP L&C SOCIETY LTD LAKARIA (BID ID -1259629)

THE A.S BROTHERS CO-OP L&C SOCIETY LTD LAKARIA (BID ID -1259629)