Construction of a Hot-Mix road in Mohalla Mauzampur, extending from the old Roadways Bus Stand (via the Tonga Stand) up to Jawahar Misthan Bhandar.

Providing and applying tack coat with VG_10 using bitumen distributor at the rate of 0.30 kg per sqm on the prepared bituminous surface cleaned with machanical broom .

Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder VG-30 grade @ 4.50% minimum as per job mix , transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRT & H Specifications Clause 505 complete in all respects. Grade II

Providing and applying tack coat with VG_10 using bitumen distributor at the rate of 0.30 kg per sqm on the prepared bituminous surface cleaned with machanical broom .

Providing and laying bituminious concrete with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 5.40% as per job mix and filler, transporting the hot mix to work site,laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRT & H Specifications Clause 507 complete in all respects.

Providing & laying of hot applied thermo plastic compound 5.0 mm thick including reflect rising glass beads @ 500 gm per Sq.M. area, thickness of 5.00 mm is exclusive of surface applied glass beads as per IRC 35 including cost of all materials, labor, machineries, T & P etc. required for proper completion of work including all other charges and taxes. The finished surface to be level, uniform and free from streaks and holes as per MORT&H specification No. 803..8.13

Providing & laying of hot applied thermo plastic compound 2.5 mm thick including reflect rising glass beads @ 250 gm per Sq.M. area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC 35 including cost of all materials, labor, machineries, T & P etc. required for proper completion of work including all other charges and taxes. The finished surface to be level, uniform and free from streaks and holes as per MORT&H specification No. 803.