REPAIR MAINT OF INTERNAL ELECTRICAL FITTING FIXTURE MISC WORKS AND COMPREHENSIVE BR MAINT OF OTM MD ACCN MES INSTALATION AT MIL STN BARABANKI UNDER GE (EAST) LUCKNOW

Amount

Dismantling Asbestos Cement (Corrugated, Semi corrugated etc.) sheets in roof coverings including ridges, hips, valleys and flashings complete all as specified and directed.

S&F 6mm thick asbestos cement corrugated or semi corrugated sheet as in roofing fixed with 'L' or 'J' type or cranked hook bolts complete all as specified and directed.

S&F 6mm thick asbestos cement two piece serrated ridges for corrugated or semi-corrugated sheet fixed with 'L' or 'J' type or cranked hook bolts Including dismantaling unserviceable complete all as specified and directed.

S&F for pre-laminated galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F for prelaminated galvalume aluminium zinc coating GI based plain steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F for rolled section as in main & cross beams, hip & jack rafters; purlins where connecting to common rafters & running rails & guides for sliding doors fixed with angles cleats or other connecting plates confirming to Fe-410W (Gde-E-250) complete all as specified and directed.

Demolition of mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) including cleaning washing down etc. complete all as specified and directed.

M&L for brushing neat cement slurry with 3 Kg of cement per Sqm complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 using 12.50 mm graded stone aggregate as in padding to maintain the slope complete all as specified and directed.

M&L for cleaning of all loose dirt and dust from roof surfaces and applying roof treatment as under :- (a) M & L for 15mm thick plastering in CM 1:4 using 100% course sand on roof including mixing of WPC @ 3% by weight of cement. (b) Applying a coat of bitumen primer @ 0.50 ltr/sqm on prepared and allow to dry. (c) Applying a coat of hot blown type bitumen grade 85/25 @ 1.20 Kg/Sqm over primer. (d) Supplying and laying 3mm Thick APP modified polymeric membrane thick (Min) polymeric water proofing membrane weight not less than 3 Kg/Sqm. (e) Applying two coat of bituminous aluminium paint 200 gram/Sqm (minimum). Note: WPC shall be measured nd paid seperately as supply only.complete all as specified and directed.

Supply only integral water proofing compound ISI marked complete all as specified and directed.

Dismantling of timber scantling 40 sqcm and over in section in any position as in unframed work complete all as specified and directed.

S&F 2nd class hardwood scantling clean swan as in purlins rafters including wooden cleats etc complete all as specified and directed.

Dismantling of Wall & ceiling boards (fiber, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

M&L of anodized aluminium snap grid size 605x605mm of frame work for false ceiling as per clause 10.38 of SSR Part I -Specifications (2009) complete all as specified and directed.

S&F 12 mm thick non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified and directed.

S&F for mild steel work as in small articles of required size as in hold fasts, angle cleats, MS grating, clamps, hooks, straps, support or stays for rain water pipes incl bolts if required and similar small articles conforming Gde Fe 410-0 complete all as specified and directed.

Taking down chowkhat or farme with shutter (without taking off shutter from the frame) area not exc 1.50 sqm each and removing from site complete all as specified and directed.

Taking down chowkhat or farme with shutter (without taking off shutter from the frame) area exc 1.50 sqm but not exc. 4 sqm each and removing from site complete all as specified and directed.

Taking down shutter of any description area not exc 1 sqm each and removing from site complete all as specified and directed.

Taking down shutter of any description area exc 1 sqm and not exc 2 sqm each and removing from site complete all as specified and directed.

Taking down door shutters of any description area not exc 1 sqm each rescuring or easing & adjusting of shutter and re-fixing in same opening complete all as specified and directed.

Taking down door shutters of any description area exc 1 sqm but not exc 2 sqm each rescuring or easing & adjusting of shutter and re-fixing in same opening complete all as specified and directed.

S&F 2nd class hard wood plain, solid, straight chowkhats and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F 35mm thick second class hard wood galzed & skeleton shutters open rebated, prepared to receive glass, guaze etc. divided into square with plain chamfered or rounded, mitred and rebated sash bar any numbers sizes of members of shutters as specified in SSR Part-I section 8 of clause 8.23 (a) complete all as specified and directed.

S&F for 30mm thick flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality & glazing with oil putty or wooden beads in square area n.exc 0.5 Sqm in each pane glazed with putty or wooden beads complete all as specified and directed.

S&F for stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm & fixed, complete all as specified and directed.

M&L for preparation of previously untreated surfaces of wood or wood based materials of any description over 10cm width or girth and applying two coats of synthetc enamel paint over a coat of pink primer all as specified and directed.

S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm & fixed, including taking down old wiremesh complete all as specified and directed.

M&L for preparation of old painted surface of wood and wood based materials of any description over 10cm in width or girth and applying two coat of synthetic enamel paint complete all as specified and directed.

S&F solid PVC door frame of size 50 x 47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube etc complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting frame made out of MS tube for top and bottom rail MS frame shall be covered with heat mould plain colour PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for style and plain colour PVC sheet for top rail lock and bottom rail on either side and as gap insert for top rail and bottom rail plain colour PVC sheet tape fixed in MS frame welding sealed to the style and rail with suitable PVC sheet bearing and jointing together with solvent cement etc complete all as specified and directed..

S&F in repair 19/20 mm thick prelaminated particle board, exterior grade prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame work complete all as specified and directed.

S&F continuous (piano) hinges, mild steel, bright finish or electro galvanized width of flaps 30mm (when open) fixed with CP steel screws, complete all as specified and directed.

S&F for 40mm dia, cupboard knobs fixed with nut, screw & washer of mild steel, bright finished complete all as specified and directed.

S&F of mild steel work as in guard bars ,grills ,gratings and similar work confirming to FE 290,Gde-E-165 etc complete all as specified and directed.

M&L framed work as in doors or gates of angle or other section with gusset plate plates rails braces etc complete drilling for fixing of steel sheeting or other covering materials or welding complete all as specified and directed including fixing, complete all as specified and directed.

S&F steel window with side hung shutter ( glazed) incl box type hinges, steel handle, peg stay lugs complete with glazing bars and painted with one soap coat of red oxide primer complete all as specified and directed.

S&F for steel window with side hung shutter (mosquito proof) with box type hing, peg stay, lugs, handles, without glazing bars complete incl one soap coat of red oxide primer complete all as specifed and directed.

S&F 30 mm thick IInd class hard wood locally fabricated glazed and skelton window or ventilator shutter open rebated and prepared to receive glass etc divited into square with plain chamfered or rounded, mitred beads for securing glass/gauge complete all as specified in SSR Part-I 1991 section 8 clause 8.20 (b)

M&L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specifed and directed.

M&L for preparation of old painted surface of steel or iron work of any description over 10cm in width or girth and applying two coat of synthetic enamel paint complete all as specified and directed.

S&F for stainless steel butt hinges medium weight 100mm size complete all as specified and directed.

S&F for stainless steel butt hinges medium weight 75mm size complete all as specified and directed.

S&F 150 mm size alumium alloy handle, fabricated type extruded section complete all as specified and directed.

S&F 100mm size alumium alloy handle, fabricated type extruded section complete all as specified and directed.

S&F 200mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed.

S&F 150mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed.

S&F 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts complete all as specified and directed.

S& F in repair mild steel 150mm, ordinary rat tail rod pattern springs including roller & roller plate complete all as specified and directed.

S&F in repair harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc curtain rods 22 - 25 mm dia including Knobs and brackets complete all as specified and directed.

Taking down of cement plaster in any description on brick or stone wall etc, including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or on concrete surfaces in CM 1:4 finished fair and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick On other than fair faces of brick work or on concrete surfaces in CM 1:4 finished fair and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick on otherthan fair faces of brick work or on concrete surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L for 10 mm thick cement plaster in cement mortar 1:4 on ceiling of concrete surfaces and finished the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for preparation the new plastered surface of wall including cornices etc and applying two coats of cement base paint (any colour as approved) complete all as specified and directed.

Complete removal of existing treatment from walls, preparation the surface of wall including cornices plasters etc and applying two coats of cement base paint (any colour as approved) on old treated surface of wall including preparation complete all as specified and directed.

M&L for preparation the new surface of wall and applying two coat of oil bound distemper on wall complete all as specified and directed.

M&L for complete removal of existing treatment from walls, preparation the surface of wall including cornices plasters etc and applying two coat of oil bound distemper any shade complete all as specified and directed.

M&L for complete removal of existing treatment of wall with and wash down etc. and applying three coat of white wash including preparation of surfaces complete all as specified and directed.

M&L for preparation of old surfaces (plastered or unplastered) of walls including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying one coat of white wash on ceiling complete, all as specified & as directed.

M&L for applying 3mm thick wall care putty on wall complete all as specified and directed.

M&L for preparation of old painted surface of wood and wood based materials of any description over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted surface of steel or iron work of any description over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old surfaces (plastered or unplastered) of walls including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying one coat of cement base paint, complete, all as specified & as directed.

M&L for preparation of old surfaces (plastered or unplastered) of walls including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying one coat of oil emulison distemper (OBD), complete, all as specified & as directed.

S&F in repair vitreous china squatting pan "Orissa" pattern size 580mmx440mm white with integral foot rests including connection to trap, and to flushing pipe, anti syphonage pipe, etc complete making good to floor complete all as specified and directed.

S&F in repair for Plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repair PVC valve less, syphonic action type flushing cistern 10 lit capacity, low level white with inlet, ball valve, float and handle including brackets and flush pipe fixed etc complete all as specified and directed.

S&F in repair vitreous China Urina, bowl type (back or corner wall type) size of 465x355x265mm white, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinalto plugs with and including 60 mm long brass screws, pointing around urinal back in cement, complete all as specified and directed.

S&F in repair viterous china Wash Hand Basin white flat black type of size 550x400mm including cutting for and pinning in ends of brackets and fixing in walls including 32mm dia chromium plated waste coupling, PVC waste pipe MS brackets complete all as specified and directed.

S&F GI tubing 15mm bore medium grade with all fittings fixed to wall, ceiling or laid in floor including taking up or down of existing steel tubing and connections complete all as specified and directed.

S&F GI tubing 20mm bore medium grade with all fittings fixed to wall, ceiling or laid in floor including taking up or down of existing steel tubing and connections complete all as specified and directed.

S&F in repair bib tap 15mm dia, chromium plated cast copper alloy with fancy type handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair stop/angle valves 15mm bore chromium plated, cast copper alloy with fancy type handles screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks & fly-nuts, screwed for iron pipes & fixed complete all as specified and directed.

S&F in repair brass chromium plated Wall mixer with hot and cold arrangement, long shank suitable 15mm bore of pipe of approved quality without telephonic shower complete all as specified and directed.

S&F in repair chromium plated single hole basin mixer with hot and cold arrangement, long shank suitable 15mm bore of pipe of approved quality complete all as specified and directed.

S&F 32mm bore brass chromium plated bottle trap for wash basin with inlet and outlet screwed for pipe or connections including necessary packing, union and cap complete all as specified and directed.

S&F in repair aluminium tubular towel rail of superior quality 'D' type 20mm dia 60cm long between flanges complete all as specified and directed.

S&F in repair CP Shower rose with arms 15mm dia complete all as specified and directed.

S&F in repair 40mm bore waste coupling of PTMT (half or full thread) for sink complete all as specified and directed.

S&F in repair of 20 mm bore ball brass valve high pressure with polythelene float and fly nut complete screwed for iron pipe or brass ferrule complete all as specified and directed.

S&F in repair of 20mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S&F PVC connection 15mm dia, with PTMT nuts of length 600mm complete all as specified and directed.

S&F PVC waste pipe of standard quality suitable for 32 mm bore waste coupling for WHB/ urinal complete all as specified and directed.

S&F for glass shelves for looking mirror of size 450x125mm with chromium plated guard, fixed with brass screws and wooden/plastic cleats complete all as specified and directed.

S&F for corner glass shelf 300mm with chromium plated guard, fixed with brass screws and wooden/plastic cleats complete all as specified and directed.

S&F for PVC Corner shelf 300mm with chromium plated guard, fixed with brass screws and wooden/plastic cleats complete all as specified and directed.

S&F CP health foucet with 1000mm long flexible mild steel tube with wall hook complete all as specified and directed.

S&F in repair CP brass toilet paper holder fixed to wall with chromium plated brass screws of approved quality complete all as specified and directed.

S&F PVC cabinet with mirror and door of size 560X410mm complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding etc (but not backing) and removing rubbish off the premises complete all as specified and directed.

M&L glazed ceramic joint free coloured tiles in vertical surfaces 450x300x7mm thick, set and joiunted in neat cement slurry and pointed in coloured cement to match over and including 10mm thick screed bed in cement mortar 1:3 complete all as specified and directed.

M&L coloured non skid ceramic jointless tiles 7 to 8mm thick (square/rectangular) are of each tile exc 0.11 Sqm but not exc. 0.18 Sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer with CM 1:4 complete all as specified and directed.

Description same as per above item no 99 but, as on dado/ skirting incl 10 mm thick rendering in CM 1:4 complete all as specified and as directed.

M&L for non skid ceramic (coloured) jointless tiles of 7 to 8mm (square or rectangular) area of each tile exceeding 0.18 sqm but not exc 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match coloured tiles over and including 15mm thick screed CM 1:4 complete all as specified and directed.

M&L for vitrified ceramic tiles 10mm thick (square/rectangular), polished, coloured (dark shade as approved), area of each tile not exceeding 0.36 sqm, on vertical surfaces such as dado, skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:4 complete all as specified and directed.

Dismantling existing water tanks capacity exc 500 Ltr but not exc 1000 Ltr, removing from site complete all as specified and directed.

S&F for 1000 Ltr capacity rotational moulded polythelene, three layer, PVC water storage tanks (cylindrical or vertical with closed top) hoisted and fixed in position complete all as specified and directed.

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. of capacity of tanks exc. 250 ltrs and not exc. 500 ltrs cleaning with wire brush complete all as specified and directed.

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. of capacity of tanks exc. 500 ltrs and not exc. 1000 ltrs cleaning with wire brush complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and paving not exc 15cm thick above or below ground level complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for 50mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protection finished even and smooth without using extra cement complete all as specified and directed.

M&L for 40mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggragate as in floor finished cement concrete surface even and smooth with using extra cement complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in foundation, fillings and mass concrete complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in lintel up to 1.5m clear span, cills, steps, bands, coping including weathering, slightly rounded or champhered, angle and throating as directed and other similar work all as specified including necessary form work complete all as specified and directed.

M&L for TMT bar 10mm dia and over cut to length, bent to shape required including cranking and binding with Mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L for TMT bar 6 to 8 mm dia and over cut to length, bent to shape required including cranking and binding with Mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floor, aprons etc complete all as specified and directed.

M&L for machine cut kota stone slab flooring 18-20 mm thick over and including 20mm thick screed bed in CM 1:6 laid and jointed with grey cement clurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and directed.

All as per Item No 116 above but as in skirting, dado over 10mm thick rendering in CM (1:4) complete all as specified and directed.

M&L for 18-20 mm thick granite work (table rubbed & polished) in steps, jambs, pillars, window-cills cooking platforms & like over and including 15 mm thick cement mortar (1:4) including pointing into white cement (1:2) using marble dust with admixture of pigment to match shade of granite complete all as specified and directed.

S&F in repair viterous china wash down water closed pan (Pedestal pattern) with 'P' or 'S' trap white fixed in repair including connection to trap and cistern, flush pipe including plastic water closet seat cover, closed pattern with flat bottom & cover and aluminium anodised hinging device and making good disturbed surface of floor complete all as specified and directed.

S&F PVC connection 15mm dia, with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repair CP Jet with flexible tube complete all as specified and directed.

S&F in repair aluminium anodised peg set of 6 legs fancy type, complete all as specified and directed.

S&F for 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F for 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed on walls complete all as specified and directed.

S&F for 110mm bore PVC (SWR) vent cowl complete all as specified and directed.

S&F for 100/110mm bore PVC (SWR) ‘P’ trap complete all as specified and directed.

S&F 30mm thick 2nd class hard wood plain framed panelled shutter any number of panels with panels of timber flat on both side not less than 12mm thick complete all as specified and directed.

S&F floor door stopper of aluminum alloy body & tongue, anodized, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F anodised aluminium door seal of standard aluminium section fixed with screws complete all as specified and directed.

S&F in repair kitchen Plate rack size 900 x 600 mm with average depth including necessary racking system and fixed in positon with rawal plug including taking down old fitment complete all as specified and directed.

Taking out existing aluminium shutter any type and refixing of aluminium shutter fixed with glazed/ particle board in panels including all necessary repair and replacing the aluminium snap beading, rubber packing, glazing clip etc., complete all as specified and directed.

S&F of 5.50 mm thick Sheet glass, ordinary quality and glazing with oil putty or Aluminium Beading in square exc 0.5 sq m in each pane incl hacking out old broken glass (any thickness, size, quality or description) from iron frames glazed with putty or wooden beads complete all as specified and directed.

S&F aluminium (Extruded section body) door closer hydraulically regulated, designation No.3, universal type,suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg. complete all as specified and directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc. complete all as specified and directed.

M&L for brick work with fly ash bricks old size, straight or curved on plan exc. 6.0M mean radius, built in cement mortar 1:6 all as specified & directed.

M&L for brick work except bricks (using old bricks recieved from demolition), straight or curved on plan exc. 6.0M mean radius, built in cement mortar 1:6 all as specified & directed.

S&F exterior tiles superior quality 25 mm thick of approved size/design/shade set & jointed in neat cement slurry & pointed in white or coloured cement to match as in floor over and including 20mm thick screed bed in CM 1:4 complete all as specified and directed. Make- Duracrete/pivot

M&L for ATT, treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed.

M&L for providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sqm of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc.complete all as specified and directed.

M&L for ATT, at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed.

Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc for taking credit including making good the disturbed surfaces to match with the existing complete all as specified and directed.

Material and labour for one light / fan point controlled by one, one way switch 06 Amp wiring with 1.5 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sq mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 20 mm dia or higher, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and replacement of sunk zinc coated pressed steel terminal box of 1.60 mm thick with 3 mm thick plastic laminated sheet top cover, brass screws, cup washers etc and making good to the disturbed surfaces to match the existing complete all as specified and directed.

All as per serial item No 143 here-in-before but one bell point controlled by one bell push, 06 Amp.complete all as specified and directed.

All as per serial item No 143 here-in-before but one, two way light point controlled by two, two way switches, 06 Amp.complete all as specified and directed.

All as per serial item No 143 here-in-before but one 3 pin, 06 Amp socket outlet point on independent board controlled by one, one way switch 06 Amp.complete all as specified and directed.

All as per serial item No 143 here-in-before but one 3 pin, 06 Amp socket outlet point on same board controlled by one, one way switch 06 Amp.complete all as specified and directed.

All as per Serial Item No 143 here-in-before but point wiring with 2.5 Sq mm single core FRLS cables and earth continuity wire of 1.5 Sq mm single core FRLS cable for one 3 pin 16 Amp socket out let point controlled by one, one way switch on independent board complete all as specified and directed.

Supply and fix switch piano flush type, 06 Amp, single pole, one way, 230 Volt complete all as specified & directed.

Supply and fix switch piano flush type, 06 Amp, single pole, two way, 230 volt complete all as specified & directed.

Supply and fix bell push, flush type, 06 Amp, 230 volt complete all as specified & directed.

Supply and fix socket outlet 2 in 1, 5 pin, 06 Amp, flush type, 230 volt complete all as specified & directed.

Supply and fix switch socket combination outlet 2 in 1, 3 pin, 06 Amp and 16 Amp flush type, universal, 230 volt, four hole complete all as specified & directed.

Supply and fix ding dong bell, AC, 230 volt, single pole complete all as specified & directed.

Supply and fix electronic ceiling fan regulator with rotary step, two module, humfree, AC, 240 volt, 100 Watt and duly ISI marked complete all as specified & directed.

Supply and fix lamp holder, PVC / Polycarbonate type with back plate suitable for batten fitting complete all as specified & directed.

Supply and fix frame plate with match cover one module plate complete all as specified and directed.

Supply and fix frame plate with match cover two module complete all as specified and directed.

Supply and fix frame plate with match cover three module complete all as specified and directed.

Supply and fix Modular switch one way 6A 230V AC 50 HZ SP one module complete all as specified and directed.

Supply and fix Modular switch one way 16A 230V AC 50 HZ SP one module complete all as specified and directed.

Supply and fix Modular socket 2/3 pin combined 6A 230V AC 50 HZ SP two module complete all as specified and directed.

Supply and fix Modular socket 6A/16A 2/3 pin combined 230V AC 50 HZ SP two module complete all as specified and directed.

Supply and fix fan regulator 2 module Modular type 230V AC 50 HZ SP complete all as specified and directed.

Supply and fix in replacement of decorative wall mounting type LED light fitting, 1 x 10 Watt, 230 Volt made up of Polycarbonate including shade, lamp holder, 10 Watts LED lamp B22 CDL etc and all accessories pre-wired including connecting up complete all as specified and directed

Supply and fix in replacement of integrated LED bulk head fitting 10 Watt, 6500K with IP 65 protection comprises of high pressure die cast aluminium housing, polycarbonate cover, etc complete all as specified and directed.

Supply and fix in replacement of single side connection LED T8 tube light rod 18/20 Watt, 6500K of four feet long into and including LED tube rod light fixture of four feet long with T8 push fit type holders, connector block, end caps, etc including connecting up complete all as specified and directed.

Supply and fix LED tube light fittings 1200 mm,20 W higher energy saving decorative ultra slim square profile LED lighting fixture with extruded polycarbonate enviromental friendly, energy efficient complete all as specified and directed.

Supply and fix LED tube light fittings 600 mm, 10 W higher energy saving decorative ultra slim square profile LED lighting fixture with extruded polycarbonate enviromental friendly, energy efficient complete all as specified and directed.

Supply and fix in replacement of LED security light fitting 45 watt, 5700K with IP 66 protection comprises of a pressure die cast aluminium housing, heat resistance toughened glass, LED lenses, surge protector, electronic driver, etc and all accessories pre-wired including connecting up with PVC insulated copper conductor cable 1.5 Sq mm, 3 core as required for connections and 32 mm bore light grade G. I. tube mounting bracket of 1.5 metre in length, bend to shape at 140 degree in ‘L’ shape and fixed to wall by means of 02 nos. of 40 x 5 mm flat iron clamps, nuts, bolts and washers etc complete all as specified and directed.

Supply and fix in replacement of single side connection LED T8 tube light rod 20 Watt, 6500K of four feet long into existing T8 conventional fluorescent tube light fitting after changing the necessary electric connections as required at site complete all as specified and directed.

Supply and fix ceiling rose, 6 Amp, 250 volt, AC, ISI marked with three equal size terminals and PVC / Polycarbonate insulated body of 50 x 25 mm size complete all as specified & directed.

Material and labour for sub main wiring with 06 Sq mm nominal cross sectional area, two single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 06 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing including taking out the unserviceable sub main wiring complete all as specified & directed.

Material and labour for sub main wiring with 04 Sq mm nominal cross sectional area, two single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 04 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing including taking out the unserviceable sub main wiring complete all as specified & directed.

Supply and fix in replacement of industrial type SPN enclosure with a two pin and earth plug and socket complete with and including MCB, SP, AC, 240 volt of 20 Amp, 'C' curve 10 KA breaking capacity and flush to wall including all cuttings & chases etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed.

Supply and fix in replacement of sheet metal enclosure distribution board, double door, single pole and neutral, AC, 240 volt, 08 way, with 200 Amp rated copper bus bar and metal door with IP - 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed.

Supply and fix in replacement of sheet metal enclosure distribution board, double door, single pole and neutral, AC, 240 volt, 12 way, with 200 Amp rated copper bus bar and metal door with IP - 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed.

Supply and fix in replacement of MCB, SP, AC, 240 volt of 06 to 40 Amp capacity "C" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed.

Supply and fix in replacement of MCB, DP, AC, 240 volt of 32 Amp capacity "C" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed.

Material and labour for earthing complete with galvanised mild steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried vertically in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level steel earth plate connected with GI wire 04 mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15 mm bore light grade all as shown in elect plate No 3 on serial page No 497 of SSR part I - 2009 and connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150 mm thick around GI earth plate, GI pipe medium grade 20 mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover 40 mm thick in PCC 1:2:4 type B1 duly reinforced with MS Bars 6 mm dia at the rate of 75 mm centre to centre both way with 12 mm dia lifting handle and pit / chamber in PCC 1:3:6 type C1, Angle iron 40 mm x 40 mm x 3 mm frame for pit cover including testing on completion complete all as specified and directed.

Supply and fix in replacement LED bulb 9 Watts suitable for B22 white in colour complete all as specified and directed.

Supply and fix in replacement LED bulb 12 Watts suitable for B22 yellow in colour complete all as specified and directed.

Supply and fix in replacement LED bulb 9 Watts suitable for E27 thread type yellow in colour complete all as specified and directed.

S&F Laminated sheet cover hylam ISI marked 3mm thick including cutting of sheet for fixing switches/sockets as required at site incl suitable size screws - 04 Nos for fixing on existing MS sunken boxes complete all as specified and directed of size 8'' x 5'' .

All as per item No 184 but of size 7'' x 4''.complete all as specified and directed.

All as per item No 184 but of size 5'' x 5''.complete all as specified and directed.

All as per item No 184 but of size 8'' x 10''.complete all as specified and directed.

All as per item No 184 but of size 12'' x 10''.complete all as specified and directed.

S&F Laminated sheet cover hylam brand ISI marked 3mm thick round sheet for fixing on junction boxes as required at site incl suitable size screws - 01 Nos complete all as specified and directed .

S&F in replacement of unserviceable PVC Conduit 20mm, ISI marked, complete all Specified and directed.

S&F in replacement of unserviceable wire of size 1.5 Sqmm with PVC insulated FRLS multistranded copper conductor for working Voltage 1100 Volts single core of 1.5 Sqmm .complete all as specified and directed.

S&F gang box suitable for 6 Amp Socket and 6 amp switch.complete all as specified and directed.

S&F gang box suitable for 16 Amp Socket and 16 amp switch.complete all as specified and directed.

S&F enclosure suitable for MCB 06 to 32 Amp two way complete all as specified and directed,

Supply and fixing ceiling fans complete with blades, down rods and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) all as specified and directed by Engr-in-Charge.

Supply and fix exhaust fans single phase 230/240 Volts heavy duty metalicbody of size 300 mm sweep 1400 RPM ISI marked, and making connection with twisted copper flexibelwire 23/0.076 mm complete all as specified and directed.

Supply and fix exhaust fans single phase 230/240 Volts heavy duty metalicbody of size 380 mm sweep 1400 RPM ISI marked and making connection with twisted copper flexibelwire 23/0.076 mm complete all as specified and directed.

Supply and fix exhaust fans single phase 230/240 Volts heavy duty metalicbody of size 450 mm sweep 1400 RPM ISI marked and making connection with twisted copper flexibelwire 23/0.076 mm complete all as specified and directed.

Supply and fixing wall fan of 300 mm sweep, 220 - 240 volts, AC, 50 Hz 1330 RPM, 55 Watts power input, air delivery 65 Cum/min with all accessories complete all as specified and directed. by Engineer - in - charge.

Supply and fix PVC air freshner 250 mm sweep AC single phase, 230/240 volts 50 Hz with louvers and making connection from ceiling rose with twisted copper flexible wire 23/0.076 mm complete all as specified and directed.

Supply and fix PVC air freshner 300 mm sweep AC single phase, 230/240 volts 50 Hz with louvers and making connection from ceiling rose with twisted copper flexible wire 23/0.076 mm all as specified and directed.

Rewinding of Ceiling/ Exhaust/ Cabin fans and pedestal fans comprising of followings: a) Rewinding of stator with supper enameled copper wire (gauge of wire shall be same as provided by the manufacturer) including varnishing the new winding wire with quick dry varnish properly. b) Replacement of defective worn out bush where required, (ball bearing, capacitor will be measured and paid separately). c) Oiling/greasing and reassembling the fans with new split pin, check nut, locking bolt, washer, holder clip and connector including providing new twisted twin core flexible copper cable of size 23/0.0076 of 1 Mtr length. d) Testing of repaired fan shall be carried out in the yard of AGE E/M (East) to the entire satisfaction of the Engr-in-Charge. Note: Rewinding shall be carried out in Yard No II, Painting of Fans deemed to be include in respective Item. 30.01 Ceiling fan of 1200 mm Sweep.complete all as specified and directed.

Ceiling fan of 1400 mm Sweep.complete all as specified and directed.

Exhaust fan 450 mm (18") to 600 mm (24") Sweep .complete all as specified and directed.

Exhaust fan 300 mm (12") Sweep.complete all as specified and directed.

M&L replacement of ball bearing of size 6201/6202/6203 all as specified and directed.

S&F Capacitor 2.5 MFD for ceiling fan of any size and exhaust fan of size 300/230mm cabin fan any sweep all as specified and directed.

S&F, 450mm long PVC pipe connection hot series with both side nut with rubber washer suitable for any capacity of Geyser complete all as specified and directed.

S&F, 600mm long PVC pipe connection hot series with both side nut with rubber washer suitable for any capacity of Geyser complete all as specified and directed.

Taking down the Geyser of any make and size horizontal or vertical from Site for repairs/overhauling/replacement of unserviceable parts including replacement of old nuts and bolts with washers heavy duty including disconnection of electric supply, water supply lines and refixing the the Geyser in the serviceable condition after assembling, testing and reconnecting the electric/ water supply line all as specified and directed. Note:- Replacement of unserviceable parts of old Geyser shall be measured and paid separately under respective item here in after except bolt, nuts and washers."complete all as specified and directed.

Supply and fix in replacement unserviceable heating element 2.0 KW of Geyser (ISI marked) for any make and type complete all as specified and directed.

Supply and fix in replacement thermostat(ISI Marked) suitable for any type, and capacity of geyser. complete all as specified and directed.

Supply and fix in replacement unserviceable indicating lamps red and green colour for Geysers any make complete all as specified and directed.

Supply and replacement of unserviceable door assembly ISI marked comprising of inlet and outlet thermostate, housing with gasket with bolts, nuts, washers, screws of packing suitable for any type and make of geyser complete all as specified and directed.

M&L repairng of leakage of inner copper/steel tank of any type /capacity and make of Geyser by brazing including necessary denting, etc complete all as specified and directed.

Supply and replacement of unserviceable plug top 3 pin 15 Amp complete all as specified and directed.

Supply and fixing of stationery storage type electric BEE 5 star rated Hot Water Geyser of capacity 25 Ltr to operate on 230 volt AC, vertical type, white in colour, working pressure min 0.8 Mpa with glass lined coated tank, magnesium anode, adjustable thermostat, enamel coated incology heating element 2 KW, ABS plastic body,Product warranty-2 Years, Heating element warranty-4 Years, Inner Tank warranty-7 Years, including 4 nos full threaded fastner of size 100 x 10 mm with 2 Nos washer, complete all as specified and directed.

Supply of Lithium based Energy efficient Integrated solar street light of 32 watt" in single FRP body with duly polyurethane coating(camouflage color),encases with monocrystalline solar PV panel of 65-66WP , Lithium Battery 11.1/12.8V, 33.0AH with inbuilt BMS, IP 65 high brightness W-led(160-180LM/WATT) lamp with aluminum reflector for better light distribution ,CRI>70, Color Temperature 5700K-6500K, Microcontroller based charge controller cum driver, automatic dimming function (first four hours at full brightness& rest of the time at lower light level with PIR Motion sensor) .Dusk to Dawn operation ,suitable to working temperature:(-) 10C to (+) 55C, weight not more than 16-18 KG with adjustable MS clamp suitable for pole/wall mounting etc complete as required. Protections :Short Circuit, overload, Reverse polarity and battery protections, Firm Should proide vital parameters test report from NABL accredited lab and should be of made in india with CE & ROHS complete all as specified and directed. Make - Philips, Bajaj, Crompton,Havells,Halonix,okaya power Pvt Ltd, Axxon Tech Industries

M&L for repair and servicing of 62.5 KVA DG set including fault finding and replacement of defective parts such as engine oil , oil fiter, air filter etc complete all as specified & directed.. Note: Fixture/spares Shall be paid and measured seperately under repective items.

M&L engine oil etc complete, complete all as specified & directed.

M&L engine oil filter suitable for 62.5 Kva DG set complete, complete all as specified & directed.

M&L engine air filter suitable for 62.5 Kva DG set complete, complete all as specified & directed.

M&L for repair and servicing of AMF panel board including fault finding and replacement of defective parts such as voltmeter,Ammeter, frequency meter, relays with wiring, complete all as specified & directed. Note: Fixture/spares Shall be paid and measured seperately under repective items.

M&L for repair and servicing of Automatic power factor controller panel (TAS Powertek Pvt Ltd) board including fault finding and replacement of defective parts such as voltmeter, Ammeter, frequency meter, capacitor relays, start/stop push buttons MCB with wiring, complete all as specified & directed.. Note: Fixture/spares Shall be paid and measured seperately under repective items.

Supply and fixing single core Copper wire having nominal area10 sqmm , PVC insulated, multistranded, FR, for LT panels including necessary lugs and thimble as required on ground complete all as specified & directed. by Engr-in-Charge.

Supply & fixing MNX power contactor 415 Volt, 50 Hz, AC of capacity 110 Amps as per sample complete all as specified & directed. by Engr-in-Charge.

Supply & fixing SMPS battery charger kit mounting in AMF panel as per sample complete all as specified & directed. by Engr-in-Charge.

Supply and fixing AMF controller module in AMF panel as per sample alongwith connected relays and wiring complete all as specified & directed. by Engr-in-Charge.

Supply & fixing automatic generator start/stop relay as per sample complete all as specified & directed. by Engr-in-Charge.

Supply & fixing HRC Fuse unit HN size 00,100 amp 100 KA 415 Volt as per sample complete all as specified & directed. by Engr-in-Charge. .

Supply and fixing MCB DP 20 Amp 10 KA C-20 complete all as specified & directed. by Engr-in-Charge.

Supply and fixing MCB DP 40 Amp 10 KA C-20 complete all as specified & directed. by Engr-in-Charge.

Supply and fixing MCB DP 63 Amp 10 KA C curve complete all as specified & directed. by Engr-in-Charge..

Supply and fix in replacement of LED security light fitting 90 watt, 5700K with IP 66 protection comprises of a pressure die cast aluminium housing, heat resistance toughened glass, LED lenses, surge protector, electronic driver, etc and all accessories pre-wired including connecting up with PVC insulated copper conductor cable 1.5 Sq mm, 3 core as required for connections and 32 mm bore light grade G. I. tube mounting bracket of 1.5 metre in length, bend to shape at 140 degree in ‘L’ shape and fixed to wall by means of 02 nos. of 40 x 5 mm flat iron clamps, nuts, bolts and washers etc complete all as specified and directed.

S&F in replacement of LED post top lantern 35 Watts with symmetric light distribution energy saving, environmental friendly IP65 spun aluminium landscape luminiary with higher power LED as light source. complete all as specified & directed.

M&L for writting name in LED lighting system with enclosure size 3 mtr x 0.8 mtr CGI Sheet min 2.0 mm thickness (SDO E/M BARABANKI) with minimum size 300 x 50 mm in PVC material IP-66 of complete as per sample complete all as specified & directed.

Supply and fix in replacement of LED security light fitting 45 watt, 5700K with IP 66 protection comprises of a pressure die cast aluminium housing, heat resistance toughened glass, LED lenses, surge protector, electronic driver, etc and all accessories pre-wired including connecting up with PVC insulated copper conductor cable 1.5 Sq mm, 3 core as required for connections and 32 mm bore light grade G. I. tube mounting bracket of 1.5 metre in length, bend to shape at 140 degree in ‘L’ shape and fixed to wall by means of 02 nos. of 40 x 5 mm flat iron clamps, nuts, bolts and washers etc complete all as specified and directed.

M&L in replacement earthing complete with galvanized steel earth plate electrode 60 cm X 60 cm X 6.0 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr below ground level connecting to the GI strip 32 x 6mm, by means nut bolt, nuts, check nuts and washer of the GI Earth wire protected by provision of GI light grade pipe 40 mm incl provision of concrete pit in PCC (1:2:4) type B-1 using 20 mm graded stone aggregated with 40 mm thick cover with RCC (1:2:4) reinforced with XPM (weight not less than 4 Kg / Sqm) and frame of angle iron 25mm X 25 mm X 3mm with lugs 2 Nos and with 6 mm dia MS bar handle made to shape, GI light grade 20 mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling, taste point made out of phosphorus bronze with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exceeding than 50 mtr, all as per electric plate No 3 of SSR Part I 2009 and connection to earth test point all as specified including testing on completion”. complete all as specified & directed.

Reapir/Replacement of Pressure pump motor, single phase, 230Volts, 50 Hz, of capacity 1.0 HP complete of pressure pumps & systems Model No-100B Pressurejet including making connections complete all as per specified and directed by the Engr-in-Charge.

S&F in replacement of LED bracket light fittings for main gate light min 12 watts with aluminium die cast IP 66 with symmetric light distribution energy saving, environmental friendly suitable for high lighting archtechural faced complete all as specified & directed.

Supply and fix in replacement of unserviceable 3 core copper flexible round cable 6 Sqmm size complete all as specified & directed.

HS ASSOCIATES (BID ID -3146911)

QUALITY CONSTRUCTIONS CO (BID ID -3139655)