Ireps

Tender Finalized · Award Unverified

Goods

1. HEX HEAD PLUG SCREW M22X1.5 (PL 33670523) 2. HEX HEAD SCREW M16X45 HIGH TENSILE (PL 33670560) 3. HEX HEAD SCREW M16X100 HIGH TENSILE (PL 33671308) 4. HEX HEAD PLUG SCREW M27X2 (PL 33672064)

Modern Coach Factory, Raebareli

Uttar Pradesh

Amount: Refer DocsCloses: 11 May 2026Closed

Timeline

Published5 May 2026
Closed11 May 2026
Financial Evaluation—
Award—

Tender Value

Refer Docs

Closing Date

11 May 2026, 2:30 pmClosed

Bidding Terms

Bidding System

Single Packet

Tender Mode

Normal Tender

Pre-Bid Conference

Evaluation Criteria

Itemwise/Consigneewise

Ranking Order

Lowest to Highest

Inspection Agency

CONSIGNEE

Approving Agency

RDSO

Offer Validity

60 days

Contract Category

Expenditure

Item Category

General

Tendering Section

Eligibility Criteria

1 condition

Special Eligibility Criteria

1
N/A
Document optionalConfirmation required

Compliance & Declarations

31 conditions · 2 needing a document upload

Check List

1
Before Submitting the Bid, bidders are advised, in their interest, to kindly go through the CHECKLIST (that can be accessed by clicking VIEW IREPS DOCUMENT tab).

Commercial-Compliance

1
HSN Code must be mentioned during quoting of tender.
Document requiredConfirmation required
2
The tendered item(s) fall(s) within the ambit of clause 3(a) of Public Procurement (Preference to Make in India) Order 2017 revision dated 19.07.2024 issued by DPIIT, Ministry of Commerce and Industry. This implies that there is sufficient local capacity and competition in supply of the tendered item(s) of required quality, and therefore public procurement of the item is restricted to Class-I local suppliers only (having local content equal to or more than 50% as defined under the Para 2 of the above order) and the vendor(s), who do not qualify to be class I local supplier(s), is/are not allowed to bid in this tender and their offer shall not be considered for any ordering. In case any vendor, who does not qualify to be class-I local supplier for the tendered item, but participates in the tender, it does so at its own risk and cost and Railways shall not be liable for any loss or damage caused to the vendor.
Document optionalConfirmation required
3
Firm should mention place of inspection. In case of procurement from approved sources, place of inspection mentioned in vendor directory available on UVAM shall be followed.
Document requiredConfirmation required
4
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions
Document optionalConfirmation required
5
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Document optional

Bid Responsiveness

1 condition

1
Validity of Offer: No deviation from the offer validity period stipulated in the tender is permitted.

Delivery Locations

2 locations across Uttar Pradesh · 8,000 Numbers total

SHELL DEPOT, MCFRBLUttar Pradesh

1600 Numbers

Furnishing Depot, MCFRBLUttar Pradesh

6400 Numbers

Delivery & Payment Terms

F.O.R

Destination

Delivery Period

For all items — Commencement : Within 1 Days of issue of Contract, Completion : Within 21 Days thereafter

Payment Terms

100% payment against receipt, inspection and acceptance of material by the consignee at destination.

Statutory Variation Clause

Statutory Variation in taxes and duties, or fresh imposition of taxes and duties by State/ Central Governments in respect of the items stipulated in the contract (and not the raw materials thereof), within the original delivery period stipulated in the contract, or last unconditionally extended delivery period shall be to Railways' account. Only such variation shall be admissible which takes place after the submission of bid. No claim on account of statutory variation in respect of existing tax/duty will be accepted unless the tenderer has clearly indicated in his offer the rate of tax/duty considered in his quoted rate. No claim on account of statutory variation shall be admissible on account of misclassification by the supplier/contractor.

Option Clause

Purchaser reserves the right to increase the ordered quantities of each description of stores shown in the contract up to 30 percent at the same price, terms and conditions anytime during the currency of the contract i.e., any time within the stipulated or extended delivery period, such that the contractor has reasonable time/notice for executing such increase. The purchaser shall be entitled to exercise plus 30 percent option in one or more than one installment as long as the total variation in quantity does not exceed the limit of 30 percent of ordered quantity. The increase in quantity (upto 30%) with respect to the tender quantity can be done even at the time of ordering and the tenderer shall be bound to accept the quantity so ordered on the basis of his original offer.

Standard Governing Conditions

The tender/contract shall be governed by latest version (along with all correction slips) of IRS Conditions of Contract, all other terms and conditions incorporated in the Tender Document, terms and conditions incorporated in the documents uploaded with the Tender Document and Bid Document Ver. 26 along with CS. In case of any contradiction in the terms and conditions, the order of precedence shall be the Tender Document, followed by the Special Conditions of Tender if any uploaded with Tender Document, followed by the related Specification/Drawing mentioned in/attached with Tender Document, followed by the Bid Document Ver. 26 along with CS, followed by latest version (along with all correction slips) of IRS Conditions of Contract. The Bid Document Ver.26 along with CS and IRS Conditions of Contract can be accessed by clicking the link VIEW IREPS DOCUMENTS on IREPS website.

Work Description

1. HEX HEAD PLUG SCREW M22X1.5 (PL 33670523) 2. HEX HEAD SCREW M16X45 HIGH TENSILE (PL 33670560) 3. HEX HEAD SCREW M16X100 HIGH TENSILE (PL 33671308) 4. HEX HEAD PLUG SCREW M27X2 (PL 33672064)

Tender Information

Tender ID

13261252

Reference Number

13261252

Tender Type

Limited - Indigenous

Form of Contract

Goods

Location

Uttar Pradesh

Source Website

Subscribe to view

Fee & Financial Details

Tender Fee Amount

₹0

EMD Fee Amount

Exempted

Important Dates

Last Activity

11 May 2026

Published

5 May 2026

Items & Quantities

4 items · 8,000 Numbers total

PL 33670523Goods (Y)

HEX HEAD PLUG SCREW M22X1.5 as per Drg.No.-DIN910, ST, PROPERTY CLASS 10.9 AS PER IS:1367 (PART-3)-2017, A3C and RDSO Specification-RDSO/CG/S/24005, Ver-1 Packing Instruction - PI042 [ Warranty Period: 30 Months after the date of delivery ] ]

Inspection Agency: CONSIGNEE
Approving Agency: RDSO
Stock Type: Stock
Considered for Evaluation: Yes

Delivery Location	State	Quantity
SHELL DEPOT, MCFRBL	Uttar Pradesh	800.00 Numbers
Total		800 Numbers

PL 33670560Goods (Y)

HEX HEAD SCREW M16X45 HIGH TENSILE as per Drg. No. IS:1364 (PART-2)- 2023 , CE- WITH PROPERTY CLASS- 10.9 TO IS:1367 (PART-3)- 2017 , COATING AS PER MDTS-057 and RDSO Spec ification- RDSO/CG/S/24005, Packing Instruction - PI042 Ver.01. [ Warranty Period: 30 Months after t he date of delivery ] ]

Inspection Agency: CONSIGNEE
Approving Agency: RDSO
Stock Type: Stock
Considered for Evaluation: Yes

Delivery Location	State	Quantity
Furnishing Depot, MCFRBL	Uttar Pradesh	4800.00 Numbers
Total		4,800 Numbers

PL 33671308Goods (Y)

HEX HEAD SCREW M16X100 HIGH TENSILE as per Drg. No. IS:1364 (PART-2)- 2023 , CE- WITH PROPERTY CLASS- 10.9 TO IS:1367 (PART-3)- 2017, COATING AS PER MDTS-057 and RDSO Speci fication- RDSO/CG/S/24005, Packing Instruction - PI042 Ver.01. [ Warranty Period: 30 Months after t he date of delivery ] ]

Inspection Agency: CONSIGNEE
Approving Agency: RDSO
Stock Type: Stock
Considered for Evaluation: Yes

Delivery Location	State	Quantity
Furnishing Depot, MCFRBL	Uttar Pradesh	1600.00 Numbers
Total		1,600 Numbers

PL 33672064Goods (Y)

HEX HEAD PLUG SCREW M27X2 as per Drg No: DIN 910, ST property class 10.9 as per IS : 1367(Part-3) 2017 A3C and RDSO/CG/S/24005, Packing Instruction - PI042 Packing Instructions- PI042 Ver.-01 [ Warranty Period: 30 Months after the date of delivery ] ]

Inspection Agency: CONSIGNEE
Approving Agency: RDSO
Stock Type: Stock
Considered for Evaluation: Yes

Delivery Location	State	Quantity
SHELL DEPOT, MCFRBL	Uttar Pradesh	800.00 Numbers
Total		800 Numbers

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

HTML

NIT Documents

nit.pdf

NIT

Work Item Documents

5763694.pdf

ATTACHMENT

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Delivery Location

State

Quantity

SHELL DEPOT, MCFRBL

Uttar Pradesh

800.00 Numbers

Total

800 Numbers

Delivery Location

State

Quantity

Furnishing Depot, MCFRBL

Uttar Pradesh

4800.00 Numbers

Total

4,800 Numbers

Delivery Location

State

Quantity

Furnishing Depot, MCFRBL

Uttar Pradesh

1600.00 Numbers

Total

1,600 Numbers

Delivery Location

State

Quantity

SHELL DEPOT, MCFRBL

Uttar Pradesh

800.00 Numbers

Total

800 Numbers