Work of fixing interlocking tiles in area in front of SLDC Complex Administrative Block, parking area and damaged dirt pathway behind New Power House Colony, BBMB, at SLDC, Industrial Area Phase -1, BBMB, Chandigarh

Site clearance (b) Surface dressing of ground including removing rank vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m in all kinds of soil. Ref (32.4 b) L/R

Construction of Embankment with Good Quality Earth obtained from Borrow pits Ref (24.5 a) T/R (a) Construction of embankment with good quality earth obtained from borrow pits including compensation of earth, loading, unloading, carriage to site of work, spreading, grading to required slope and compacting to meet requirement of table 300-2 as per technical clause 305 of MORT&H specifications.

Cement Concrete 1:5:10 with stone aggregate 40mm gauge mixing by manual means (Pb.CSR Ref. No. 10.9)b(i) (T/R)

Providing and laying 60mm thick factory made cement concrete interlocking Paving blocks of M-35 grade manufactured by block making machine equipped with steel mould clamped to a strong vibratory table with hydraulic pressure for compaction of concrete as per IRC SP 63-2014 and of approved size and design / shape laid in ordinary grey colour and pattern over and including 40mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per directions of Engineer-in-charge. Ref. No. (14.138) T/R

Cement concrete 1:2:4 with stone ballast or shingle mixing by manual means (Pb.CSR Ref. no. 10.13 (i) (T/R)

Precast Cement Concrete Kerb Ref (24.41 a) T/R (a) Providing and laying factory made rubber moulded smooth finish cement concrete Kerb M-20 grade 250mm high with bottom width 165mm and top width 115mm made over strong vibratory table and fixing with cement mortar 1:2 as per MORT&H specifications

Applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface Ref (16.31) T/R

Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. Ref (16.17) T/R

Dismantling of Flexible Pavements (By Mechanical Means) Dismantling of flexible pavements thickness above 50mm by mechanical means and disposal of dismantled materials up to a lead of 1000 meters, stacking serviceable and unserviceable materials separately as per technical clause 202 of MORT & H specifications