ADDITION ALTERATIONS OF BUILDING NO. P13 AND P14 (TYPE-II) MARRIED ACCOMMODATION AND COMMON WASHROOM AT CGRA, TUTICORIN UNDER GE (I) (CG) CHENNAI

Amount

B/R ITEMS

M&L for complete removal of existing treatment on walls and applying two coats of distemper with oil emulsion over a coat of wall care putty of thickness 1.5mm and alkali resistant primer complete all as specified and as directed.

M&L for preparation of old treated surfaces of ceilings and applying one coat of white wash complete all as specified and as directed.

M&L for preparion of old treated surfaces of walls and applying one coat of weather proof exterior Emulsion Apex Ultima of Asian Paints or Weather coat smooth of Berger or equivalent of other specified makes on external surfaces of walls complete all as specified and as directed.

M&L for preparation of old painted wood and wood based surfaces over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area not exc.1.5 sqm each along with fittings including separating guard bars/grills/ wire mesh etc., complete all as specified and as directed.

Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area exc.1.5 sqm not exc 4sqm each along with fittings including separating guard bars/grills/wire mesh etc., complete all as specified and as directed.

Taking down shutters of any description exceeding 1 sqm but not exceeding 2 sqm each with fittings complete all as specified and directed.

Material and labour for second class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed including treating back of chowkats with coal tar etc., complete all as specified and as directed.

Supply and Fix factory made second class hardwood 35 mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, kiln seasoned and chemically pressure treated supplied and fitted to chowkats complete all as specified and directed.

Supply and Fix 2nd class hardwood factory made glazed and skeleton door shutters, 35mm thick divided into squares, open rebated and prepared to receive glass, gauge etc., with sash bars, edges of framing plain, chamfered, rounded fitted with cut and mitred beads for securing glass etc, size of members as specified in SSR Part 1 section 8 clause 8.24 (b) supplied and fitted to chowkats complete all as specified and as directed.

Material and labour for preparation of new wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer on surfaces of wood of any description over 10 cm in width or girth not other wise described complete all as specified and directed.

Supply and Fix solid PVC door frame of size 50mmx47mm made out of 5mm thick plain colour PVC sheet reinforced with 19mm MS square tube of 19 gauge mitred out at two corners and joined by inserting two Nos of 150mm long brackets of 15mmx15mm MS square tube inside the drilling 100mm long MS screws using PVC fastener complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) both side Prelam PVC sheet used instead of Plain colour PVC sheet. Stile and rails feathered at edges consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site at site complete all as specified and directed.

Supply and Fix powder coated aluminium sections for frame of doors, windows, ventilators, partitions etc., having thickness of powder coating not less than 50 micron and colour as approved by GE/ Engineer - in Charge with one or more rebates including necessary joining cleats etc., complete all as specified and directed.

Supply and Fix powder coated aluminium window and ventilator shutters, having thickness of powder coating not less than 50 micron and colour as approved by GE, sliding type without sash bar using aluminium section weighing not less than 0.55 Kg/Rm including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, rollers, interlocking handles etc complete all as specified and as directed. Note : Powder coated Aluminium frame for two track/three track sliding windows, Glass panes and wire mesh shall be measured and pais separately.

Supply and Fix powder coated aluminium window and ventilator shutters, side hung type without sash bars, using aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, powder coated aluminium snap beading, screws, poder coated aluminium fittings such as peg stays 150mm long (1 No.). hinges type B-21 100mm long (2 Nos.) suitable handle (1 No.) etc., complete all as specified and as directed. Note : Powder coated Aluminium frame for windows, Glass panes and wire mesh shall be measured and pais separately.

Material and labour for 18/19mm thick Prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination with lipping fixed with screws to timber frame work in repairs rate including neccesary fittings like soft close hinges,handles etc., complete all as specified and as directed.

Supply and Fix 125 mm long Stainless steel ISI marked butt hinges complete all as specified and as directed.

Supply and Fix 100 mm long Stainless steel ISI marked butt hinges complete all as specified and as directed.

Supply and Fix Continuous (piano) hinges, width of flaps 35mm (when open), mild steel, bright finish or electrogalvanised complete all as specified and as directed.

Supply and Fix Aluminium anodised, ISI marked barrel tower bolts 200mm of extruded section and fixed complete all as specified and directed.

Supply and Fix Aluminium anodised, ISI marked barrel tower bolts 100mm of extruded section and fixed complete all as specified and directed.

Supply and Fix 150mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring,fixed in floor complete all as specified and directed.

Supply and Fix extruded aluminium alloy handles fabricated types, anodised, each 150mm long complete all as specified and directed.

Supply and Fix 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

Supply and Fix Hasp and staple 100mm, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws etc., complete all as specified and as directed.

Demolition of floor hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises to out side MD land etc., complete all as specified and as directed.

Material and labour for coloured Non Skid ceramic tiles, matt finish of grade B-II(a), 7 to 8 mm thick (square/ rectangular), light coloured group, area of each tile exceeding 0.18Sqm but not exceeding 0.38 Sqm, laid in floors of pattern as approved over and including 15mm thick screed bed in Cement mortar 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and as directed.

Material and labour for coloured Non Skid ceramic tiles, matt finish of grade B-II(a), 7 to 8 mm thick (square/ rectangular), light coloured group of size matching to floor tile as approved, fixed in vertical surfaces such as in skirting/dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match floor tile over a backing coat in Cement Mortar 1:4, 10mm thick on fair faces of brick or concrete surfaces all as specified and as directed.

Material and labour for coloured Non Skid ceramic tiles, matt finish of grade B-II(a), 7 to 8 mm thick (square/ rectangular), light coloured group area of each tile exceeding 0.06Sqm but not exceeding 0.11 sqm, laid in floors of pattern as approved over and including 15mm thick screed bed in Cement mortar 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and as directed.

Material and labour for glazed coloured ceramic tiles of grade B-III, 7mm thick of size 450mm x 350mm or 350mm x 250mm or of size matching to floor tile as approved by GE, fixed in vertical surfaces such as in skirting/dado set and jointed in neat cement slurry and pointed in white or coloured cement to match floor tile over and including a backing coat in Cement Mortar 1:4, 10mm thick all as specified and as directed.

Material and labour for Green Marble work 18 to 20mm thick (table rubbed and pre polished) in steps (in single piece), jambs, pillars, window cills,cooking platforms including nosing and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble over a screed bed/backing coat of 15mm thick cement mortar 1:4 including nosing half round bullnose finish at edges etc., complete all as specified and as directed.

Material and labour for Granite 20mm thick (black galaxy) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms,verandah including nosing and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over a screed bed of 15mm thick cement mortar 1:4including rounding edges/nosing including nosing half round bullnose finish at edges etc., complete all as specified.

S&F 4mm thick plain sheet glass, ordinary quality and glazing with oil putty in square n. exc. 0.5 Sq.m. in each pane complete all as specified and as directed.

S & F aluminium alloy wire cloth, 0.45mm nominal dia. of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed.

S & F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

Supply and Fix Powder coated aluminium grill DG 916 having thickness of powder coating not less than 50 micron and colour, design/pattern as approved, with approved standard section and fixed to the existing window frame with 'H' or 'F' channel of size 38mm x 12mm x 1.30mm (SEc No.8778) with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles etc., complete as per requirement and direction of Engineer-in-charge.

Taking down 25mm dia steel tubing including all connections and fittings complete all as specified and as directed by the Engineer-in-Charge.

Taking down 20mm dia steel tubing including all connections and fittings complete all as specified and as directed by the Engineer-in-Charge.

Taking down 15 mm dia steel tubing including all connections and fittings complete all as specified and as directed by the Engineer-in-Charge.

Supply and Fix of 25mm outer dia 3-layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and as directed.

Supply and Fix of 32mm outer dia 3-layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and as directed

Supply and Fix in repairs PVC valveless, syphonic action type, flushing cistern of Capacity 10 Litre low level, white, with inlet, ball valve, float and handle including brackets and flush pipe etc., complete all as specified and as directed.

Supply and fix plastic water closet (EWC) seat cover, white colour, closed pattern with flat bottom and mild steel chromium plated or aluminium hinging device of same make of EWC, fixed complete all as specified and as directed.

Supply and fix Vitreous china Wash Hand Basin, white, flat back of size 550x400mm including cantilever brackets (CI/PVC), porcelain stopper, cutting for and pinning ends of brackets including waste fittings of brass chromium plated 32 mm (excluding waste pipe, taps chain and plug) complete fixed in repairs all as specified and as directed.

S & F Vitreous China Urinal, Half stall type, white with grating and union for discharge pipe including 32mm dia waste pipe, fixed in repairs complete all as specified and as directed.

Supply and fix in repair Brass chromium plated shower rose of size 125mm with or without swivel joints complete all as specified and as directed.

Supply and fix in repairs Bib tap long body, 15 mm bore, cast copper alloy, chromium plated, fancy type with crutch or butterfly handle confirming to IS screwed down, screwed for iron pipes or for brass ferrule and fixed complete all as specified and as directed.

Supply and Fix in repairs 15mm bore dia Pillar taps, cast copper alloy, chromium plated, fancy type with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

Supply and Fix in repairs 15mm bore dia Angle Stop valves (Concealed/open), cast copper alloy, fancy type Chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions fixed complete all as specified and as directed.

Supply and Fix in repairs PVC flexible connections 15mm size of length 600mm with PTMT nuts complete all as specified and as directed.

Supply and Fix in repairs Tubular towel rail, Brass chromium plated, 20mm dia, 60cm long between flanges complete all as specified and as directed.

Supply and fix in repairs health faucet (hand shower) chromium plated with 15 mm dia and 1500mm long flexible tube in chrome finish with wall hook screwed for two way bib taps/angle cock etc., complete all as specified and as directed.

Supply and Fix in repairs Aluminium powder coated curtain rods of 25mm diameter with wall thickness not less than 1.5mm for windows, doors opening etc. complete all as specified and as directed.

Supply and Fix in repairs fancy type aluminium powder coated knobs/brackets for fixing curtain rod of 25mm diameter complete all as specified.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar or cement lime lime mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precastconcrete articles portions ordered to be dismantled complete all as specified and as directed.

Material and labour for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and as directed.

Material and labour for Reinforced cement concrete (nominal mix) 1:2:4, type B1, using 20mm graded granite stone aggregate as in Fins, fascias, louvres, parapets, and railings exc. 60cm in height, newels, balustrade, and the like etc., complete all as specified.

Formwork to Fins, louvers, fascia, parapet and similar items including edges flat rough finished surfaces of concrete all as specified and as directed.

Material and labour for rendering in Cement Mortar 15mm thick in two coats, i.e, in Cement Mortar 1:4, 5mm thick mixed with water proofing compound as per manufacturers' instructions over in Cement Mortar 1:6, 10mm thick on fair faces of brick/concrete surfaces, finished even and fair externally all as specified and as directed. Note: WPC will be measured and paid separately.

Material and labour for rendering 10mm thick on fair faces of brick work or concrete surfaces in walls/ceilings in Cement mortar 1:6 complete all as specified and as directed.

Material and labour for rendering 5mm thick on fair faces of concrete surfaces in ceilings in Cement mortar 1:3 complete all as specified and as directed.

Supply and Fix in repairs Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified and as directed.

Demolition of Plain cement concrete in any description (Unreinforced) not exceeding 15cm thickness (below or above ground level) complete all as specified and as directed.

Material and labour for PCC 1:3:6, type C2, 75mm thick (using 40mm graded stone aggregate) laid to a slope of 1:20 as in plinth protection / foot path etc., finished the surfaces fair and even with out using extra cement including providing 12mm wide and 50mm deep joint at a distance not exceeding 2.5 Metre and at corners and the joints shall be filled with mastic filling of bitumen 85/25 and the sand in the ratio 1:2 all as specified and as directed.

S & F in repairs UPVC (SWR) pipes 75mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors including necessary fittings such as bend. Elbow, tee, Y etc., all with access door complete all as specified and as directed

S & F in repairs UPVC (SWR) pipes 110mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors including necessary fittings such as bend. Elbow,tee, Y etc., all with access door complete all as specified and as directed.

S & F of PVC (SWR) floor trap 75mm/110mm dia, plain with grating including jointing with solvent cement including necessary fittings such as bend. Elbow,tee, Y etc all with access door complete all as specified and as directed.

S & F in repairs UPVC (SWR) pipes 75mm dia single socketed in any length with rubber ring joints fixed to walls including necessary fittings such as bend. Elbow,tee, Y etc all with access door complete all as specified and as directed.

S & F in repairs UPVC (SWR) pipes 110mm dia single socketed in any length with rubber ring joints fixed to walls including necessary fittings such as bend. Elbow,tee, Y etc all with access door complete all as specified and as directed.

S & F in repairs UPVC (SWR) pipes 75mm dia double socketed in any length with rubber ring joints fixed to walls including necessary fittings such as bend, Elbow,tee, Y etc all with access door complete all as specified.

S & F in repairs UPVC (SWR) pipes 110mm dia double socketed in any length with rubber ring joints fixed to walls including necessary fittings such as bend. Elbow,tee, Y etc all with access door complete all as specified and as directed.

S & F UPVC (SWR) vent cowl 110mm dia complete all as specified and as directed.

M & L for PVC (SWR) gully trap 125/110 mm,setting and jointing with solvent cement complete all as specified and as directed.

Supply and fix in repairs vitreous China wash down water closet white (including fixing bolts) including removing old one and connection to drain and flush pipe complete all as specified and as directed.

Taking down existing roof treatment including plaster, roof tiles, padding concrete of any description up to top level of roof etc., complete all as specified and as directed.

Material and labour for 25mm average thick PCC 1:2:4, type B0, using 12.5mm graded stone aggregate mixed with water proofing compound as per manufacturer's instructions as in roof padding and finished the surfaces fair and even complete all as specified and as directed. Note: Liquid WPC will be measured and paid separately.

Material and Labour 10 mm thick screed bed or bedding layer in cement mortar 1:4, mixed with water proofing compound as per manufacturer instructions and finished the surface fair and even including preparation of rendered surfaces of roof and brushing neat cement slurry with 3.0 kg of cement per square metre complete all as specified and as directed. Note: WPC shall be measured and paid separately

Material and Labour for applying a tack coat of industrial bitumen 85/25 @ 1.50 Kgs per Sqm over a coat of bitumen primer @ 0.30 litre per Sqm including preparation of roof surfaces and providing water proofing treatment with membrane type water proofing method using APP modified prefabricated five layer water proofing membrane matt finish, 3 mm thick and weighing not less than 3.0 kg/sqm reinforced with non woven polyester fabric (weight not less than 150gms/Sqm) matt black finished laid over entire roof surface and on verticle surface up to grooves by torch application of membrane using gas burner with 100 mm overlap and Hot blown bitumen grade 85/25 compatible with membrane shall be applied @1.5kg/Sqm over the membrane as per manufacturers instructions complete all as specified and as directed. Note: (i) The work shall be executed through Manufacturer's applicator approved by GE. (ii) The quoted rate is deemed to include the cost of digital photograph and plaster plate as per PS.

Supply only integral water proofing compound of approved quality.

Supply and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner complete all as specified and as directed.

S & F Towel Ring of Chromium plated 300mm length/dia fixed with and including Chromium plated brass screws complete all as specified and as directed

S & F Soap dish chromium plated of size not less than 100mm, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed

S & F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long fixed to plugs with chromium plated brass screws complete all as specified and as directed

S & F Double action door spring hinges of size 100mm, mild steel with steel wire spring, stove enamelled, black complete all as specified and as directed

Material and labour for providing precast cement concrete, 1:2:4, type B1, using 20mm graded stone aggregate and set in CM 1:6 as in landings, manhole cover slab etc, including making of perforated holes if necessary complete all as specified and as directed. Note: Reinforcement bars shall be measured and paid separately.

Material and labour for Mild steel TMT bars in reinforcement, 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-500D all as specified and as directed.

Material and Labour for providing and fixing stainless steel railing made of hollow tubes, channels, plates etc., standard quality of grade AI SI-304, wall thickness not less than1.5mm including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement. complete all as specified and as directed. Note : The unit rate quoted shall be deemed to include ths cost of staging/Scaffolding and other supporting material.

M & L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

Material and labour for laying of machine pressed precast concrete interlocking paver block, 60 mm thickness, M-35 grade with grey cement and pigments of any shape and size confirming to IS 15658-2006 over compacted sand cushioning all as specified and as directed by the Engineer-in-charge. Note Sand cushioning shall be measured and paid separately.

E/M ITEMS

Supply and Fix in repairs Modular Bell push, One module, Single Pole, 6 Amps, 230 Volts complete all as specified and as directed.

Supply and Fix in repairs Bell electric Ding dong type, AC Single Pole, 230 Volts complete all as specified and as directed.

Supply and Fix in repairs Modular Switch, One module, Single Pole, one way, 6 Amps, 230 Volts complete all as specified and as directed.

Supply and Fix in repairs Modular socket outlet, Two modules, Single Pole, 2/3 pin, 6 Amps, 230 Volts complete all as specified and as directed.

Supply and Fix in repairs Modular Switch1 6 Amps, One modules, Single Pole, one way, 230 Volts complete all as specified and as directed.

Supply and Fix in repairs Modular socket outlet 16 Amps, Two modules, Single Pole, 2/3 pin, 230 Volts complete all as specified and as directed.

Supply and Fix in repairs Stepped type electronic fan regulator flush type complete all as specified and as directed

Material and labour for Cleaning and preparing the surfaces of ceiling fan/Ehaust fan/ DB Panel of any size/make/model complete in site, removing the grease, carbon dust over the fans, filling the cavities with fillers and painting with one coat of synthetic enamel paint of approved colour with brush painting and numbering the fans "MES NO." with black enamel paint complete all as specified and directed.

Supply and Fix in repairs Modular White cover plate with frame, 1 module complete all as specified and as directed.

Supply and Fix in repairs Modular metal flush box suitable for 1 module complete all as specified and as directed. Note : The unit rate quoted shall be deemed to include the cost of cutting chases in brick/stone masonry walls, plastering and making good the disturbed surfaces.

Supply and Fix in repairs Modular White cover plate with frame, 2 moduls complete all as specified and as directed.

Supply and Fix in repairs Modular metal flush box suitable for 2 module complete all as specified and as directed. Note : The unit rate quoted shall be deemed to include the cost of cutting chases in brick/stone masonry walls, plastering and making good the disturbed surfaces.

Supply and Fix in repairs Modular White cover plate with frame, 3 moduls complete all as specified and as directed.

Supply and Fix in repairs Modular metal flush box suitable for 3 module complete all as specified and as directed. Note : The unit rate quoted shall be deemed to include the cost of cutting chases in brick/stone masonry walls, plastering and making good the disturbed surfaces.

Supply and Fix in repairs Modular White cover plate with frame, 6 moduls complete all as specified and as directed.

Supply and Fix in repairs Modular metal flush box suitable for 6 module complete all as specified and as directed. Note : The unit rate quoted shall be deemed to include the cost of cutting chases in brick/stone masonry walls, plastering and making good the disturbed surfaces.

Supply and fix in repairs MCB Single Pole and Neutral (MCB SPN) of rating 40Amps, 240 volts of rupturing capacity 10kA, C curve type complete all as specified and as directed.

Supply and fix in repairs MCB Single Pole (MCB SP) of rating 6-32Amps, 240 volts of rupturing capacity 10kA, C curve type complete all as specified and as directed.

Supply and fix in repairs Ceiling rose, surface mount type, PVC/ Polycarbonate, with face bakelite 65 x 50mm three terminals, 240 Volt, AC 3 phase complete all as specified and as directed.

Supply and Fix in repairs condenser/capacitor 2.5 Mfd capacity suitable for ceiling fan of any make/ sweep conforming to relevant IS specification complete all as specified and as directed.

Material and labour for taking down carefully, dismantling and opening the Ceiling fans of any size/ any make after disconnecting the electric connection replacing the worn out ball bearings, gun metal bush, burnt out winding and clearing the slot, Rewinding the stator with super enameled bare copper conductor with the same size and number of turns as that of the old one to get designed speed for the particular make of fans including insulating varnishing, providing sleeves, and pre heating reassembling, refixing and re-connecting the fans to ceiling rose/connector etc., complete all as specified and as directed. Note: The unit rate quoted shall be deemed to include the cost of replacing ball bearings, gun metal bush and Rewinding the stator etc.

Material and labour for taking down carefully, dismantling and opening the Exhaust fans of any size/ any make after disconnecting the electric connection replacing the worn out ball bearings, gun metal bush, burnt out winding and clearing the slot, Rewinding the stator with super enameled bare copper conductor with the same size and number of turns as that of the old one to get designed speed for the particular make of fans including insulating varnishing, providing sleeves, and pre heating reassembling, refixing and re-connecting the fans to ceiling rose/connector etc., complete all as specified and as directed. Note: The unit rate quoted shall be deemed to include the cost of replacing ball bearings, gun metal bush and Rewinding the stator etc.

Material and labour for taking down carefully the Ceiling fans of any size/ any make after disconnecting the electric connection for checking of clamps/ Split pin, rubber bushes, canopy condition and replacing the clamps/ Split pin, rubber bushes, canopy, nuts, bolts etc., to ensure safety hanging of ceiling fans at CGRA Qtrs/OTM Accn area, refixing and re-connecting the fans to ceiling rose/connector including cleaning, application of lubricant oil/ grease etc., complete all as specified and as directed. Note: The unit rate quoted shall be deemed to include the cost of replacing Clamps bush, pins, nuts, bolts, canopy, cleaning, application of lubricant oil/ grease etc.

Supply and Fix louver suitable for exhaust fans of sweep 300mm with protection mesh and without shutter to avoid birds entering including taking down unserviceable louvers complete all as specified and directed.

Supply and Fix LED security light fittings 20W of minimum 110LPW made up of pressure dies cast housing with toughened glass with optics/diffuser with suitable integral electronic drivers , IP 66 Protection all as per CAt No.LSTS-20-CDL-M of Crompton or technocommercially equivalent of other specified makes complete all as specified and as directed. Note: The new fittings shall bear the CA No. and Year written by Black synthetic enamel paint using stencils or by permanent marker pen and the unit quoted shall be deemed to include the cost of writing these details.

Material and labour for point wiring complete with two runs of 1.5sqmm (for Phase and Neutral) PVC insulated unsheathed multistranded, copper conductor FRLSH cable of 1100V grade conforming to IS -694 drawn through and including new non metallic rigid PVC conduit medium grade, ISI marked, 20mm bore with conduit accessories concealed in wall/floor/ceiling etc and provn of 1.5sqmm PVC insulated unsheathed copper conductor cable of green colour for earth continuity and connecting to common earth dolly etc., for One light point or one fan point controlled by one modular switch complete all as specified and as directed. Note : (a) The wiring shall be done in proper color coding using red, yellow, blue for phases, black for neutral and green for earth. (b) Modular metal flush boxes, Modular cover plate with frame shall be measured and paid separately. (c) The cost of cutting chases in brick/stone masonry walls and making good the disturbed surfaces shall be deemed to include in the quoted rate.

Material and labour for concealing the existing point wiring with replacing the PVC Conduit with new non metallic rigid PVC conduit medium grade, ISI marked, of suitable size with conduit accessories including cutting chases in brick/stone masonry walls, rendering with cement mortar and making good the disturbed surfaces complete all as specified and as directed.

Material and labour for Earthing complete with galvanised steel pipe electrode, 40mm bore, medium grade, 2.5 metres length, buried directly and preferably vertically in ground with top edge not less than 1.25 metres below ground level connected with earthing lead of 4mm dia galvanised iron or steel wire all as shown in Plate No. 2 to the earthing test point all as specified and indicated including testing on completion all as specified and as directed.

Supply and fix 4 feet, 1 x 20 Watts LED light fitting, wall mounted LED batten, natural white with integrated electronic drive, 100 lumens per Watt in polycarbonate housing all as per Cat No.20W Laser Ray Neo of Crompton or technocommercially equivalent of other specified makes fixed on surfaces of wall or ceiling with necessary hanging/fixing arrangements and connecting of flexible wire twin core from ceiling rose to fitting drawn through and including flexible conduit etc., including taking down old fitting complete all as specified and directed. Note: The new fittings shall bear the CA No. and Year written by Black synthetic enamel paint using stencils or by permanent marker pen and the unit quoted shall be deemed to include the cost of writing these details.

Supply and fix 2 feet 1 x 10 Watts LED light fitting, wall mounted LED batten, natural white with integrated electronic drive, 100 lumens per Watt in polycarbonate housing all as per Cat No.10W Laser Ray Neo of Crompton or technocommercially equivalent of other specified makes fixed on surfaces of wall or ceiling with necessary hanging/fixing arrangements and connecting of flexible wire twin core from ceiling rose to fitting drawn through and including flexible conduit etc., including taking down old fitting complete all as specified and directed. Note: The new fittings shall bear the CA No. and Year written by Black synthetic enamel paint using stencils or by permanent marker pen and the unit quoted shall be deemed to include the cost of writing these details.

Supply and Fix in repairs Modular Switch, One module, Single Pole, two way, 6 Amps, 230 Volts complete all as specified and as directed.

Phejays Agencies (BID ID -3340407)

AnnaiEnterprises (BID ID -3339814)

VVM CONSTRUCTIONS (BID ID -3339622)

Vinayaga constructions (BID ID -3340058)

P S G CONSTRUCTIONS (BID ID -3340505)

Banyan Engineers and Contractors (BID ID -3340663)

SIVAN BUILDERS (BID ID -3340774)