Loading
Loading…
Loading…
Tender Value
₹13.4 Cr
EMD Value
₹15 L
Closing Date
30 Jul 2026, 9:30 pm
North Western Karnataka Road Transport Corporation
Construction of New EV Depot Hubballi at RWH Premises (under PM-eBus sewa scheme)
310755
NWKRTC/2026-27/BD/WORK_INDENT96
Open
Buildings
North Western Karnataka Road Transport Corporation Head Office
7 documents required · 7 mandatory
To Qualify for award of this contract, the Tenderer must have appropriate valid Class - 1 Contractors Registration Certificate, registered in KPWD / MES / CPWD as on the Date of Tender Notification. Scanned copy of valid contractors Registration Certificate.
To Qualify for award of this contract, the Tenderer, as a prime contractor, should have in his name satisfactorily completed at least one similar nature of i.e., Construction of RCC framed structure building work with CC pavement, costing not less than Rs. 670.00 Lakhs during the last five years i.e, from 2021-22 to 2025-26. The work must have completed till the last date of submission of tender. Work Done Certificate shall clearly mention the Date of completion of the certified work. Scanned copy of the Work done/ Work Completion Certificate, Certified by an Officer not below the rank of Executive Engineer for work done in Govt. /Public Sector Undertakings.
To Qualify for award of this contract, the Tenderer, as a prime contractor, should have in his name, Executed in any one financial year during last five years i.e. from 2021-22 to 2025-26, the minimum quantities of works mentioned below. a) Earthwork excavation/Filling earth - 11485/-Cum. b) PCC/DLC/RCC - 5316.00 Cum. c) Reinforcement steel - TMT /HYSD/ Mild steel - 151039.00 Kg. d) BBM/SSM/CC Solid block/Similar Masonry wall - 496.00 Cum. e) Flooring (Granite/Vitrified/Ceramic/Tandur/Cudapa) - 1638 Sqm. f) MS Structural steel - 27336.00 Kg. h) Precoated galvanised iron profile sheet - 894.00 Sqm. i) Electrical works/Fire protection work - Rs.1,29,92,000/- Scanned copy of the Work done /Completion Certificate, along with details of quantities executed, Certified by an Officer not below the rank of Executive Engineer for work done in Govt./public sector undertakings should be uploaded.
To Qualify for award of this contract, the assessed available tender capacity (AATC) of the tenderer should be more than the amount put to tender. Note: The bid capacity of the tenderer is calculated based on the formula. Assessed Available Tender Capacity ( (A x N x 1.5) - B) Where A - Maximum value of Civil Engineering works, updated to 2026-27 price level, executed in any one year during the last five years. (Completed as well as works in progress). B - Value at 2026-27 price level of existing commitments and ongoing works to be completed during the next two years. N - Number of years prescribed for completion of the work for which tender is invited. 1.5 - Multiplying factor for assessing the available tender capacity for works costing more than Rs 100.00 Lakhs. The Bidder/Contractor must submit details of existing commitments and ongoing works to be completed in the prescribed format only (Annexure-B) duly signed. In case the Bidder does not have any existing commitments, the same should be indicated as NIL in the prescribed format (Annexure-B), duly signed. Details submitted in any other format or submission of document in which the Bidder himself has calculated the Bid capacity will not be considered for evaluation and also will not qualify for eligibility.
The bidder must have following Key & critical equipments. a) Owned: 1. Hydraulic Excavator (JCB/Hitachi etc) - 01, 2. Tipper - 02, 3. Self loading Concrete batch mixing plant/ machine mixture/ Transit mixer, like Ajax -01, 4. Water tanker - 01, 5. Shuttering materials -4000.00 Sqmtr, b) Hired/lease basis: 1. Hydraulic Excavator (JCB/Hitachi etc) - 01, 2. Tipper - 02, 3. Water tanker - 01, 4. Vibrator road roller - 01, 5. Self loading Concrete batch mixing plant/machine mixture/ Transit mixer, like Ajax -01. Details of having key and critical equipments owned/hired/leased by the bidder, should mention such details in the prescribed format (Annexure-C) and duly signed by the bidder and the same should be uploaded in the portal, along with relevant supporting documents. Otherwise bid will not be considered for evaluation.
To Qualify for award of this contract, the Tenderer has to furnish Liquid assets statement or availability of credit facilities for an amount not less than Rs.446.68 Lakhs, Letter of Credit issued from any Nationalized Bank / Schedule bank (excluding Co-operative banks) in the prescribed format. Scanned Copy of the Credit Lines / Letters of Credit / Certificates from any Nationalized Bank / Schedule bank (excluding Co-operative banks), clearly specifying name of the work or Work Indent No.(as per the prescribed format) addressed to the Executive Engineer, NWKRTC C.E. Dept. central office, Hubballi (Annexure-A) duly signed by Bank Manager with date.
To Qualify for award of this contract, the Tenderer in his name should have, in the last five financial years (i.e. during the years 2021-22, 2022-23, 2023-24, 2024-25 and 2025-26) achieved in at least two financial years a minimum financial turnover of Rs. 2680.13 Lakhs ( in all classes of civil engineering construction works only). Scanned copy of year wise audited profit / loss statements of two financial years in which minimum financial turnover of Rs. 2680.13 Lakhs is achieved. (Certified by Chartered Accountant only. Statement issued by others will not qualify for eligibility).
₹7,500
₹15 L
2 Jul 2026
2 Jul 2026
1 Aug 2026
20 Jul 2026
17 Jul 2026
Concreting Parking area and Driveway concreting
Earth work in surface excavation by mechanical means for lowering & levelingthe ground for all works other than foundation in all kinds of soils & upto depthnot exceeding 300mm as per drawing and tech...
Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...
Construction of Granular Sub-Base by providing graded Material, mixing, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface, mixing with cement ...
Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ra...
Construction of M40 Grade un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base in recommended proportions, coarse and fine aggregate conforming to IS 383:2016, maximum...
Cutting transverse contraction joints 3 to 4 mm wide and depth 60mm in concrete slab using concrete cutting machine with diamond studded saw within 4-8 hours of casting of bay / slab etc. complete inc...
Vaccum de-watering with vaccum pump and suction mat and compaction with skin floater clubbed with floating disc including cost of. generator, HOM of machinery, Screed Vibratory, Power Floater, blade a...
Supplying, fitting and placing Mild Steel Reinforcement complete as per drawing and technical specification..( CSR 2023-24/Vol -1/18/2.12)
Earth work in surface excavation by mechanical means for lowering & levelingthe ground for all works other than foundation in all kinds of soils & upto depthnot exceeding 300mm as per drawing and tech...
Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...
Construction of Granular Sub-Base by providing graded Material, mixing, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface, mixing with cement ...
Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ra...
Construction of M40 Grade un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base in recommended proportions, coarse and fine aggregate conforming to IS 383:2016, maximum...
Cutting transverse contraction joints 3 to 4 mm wide and depth 60mm in concrete slab using concrete cutting machine with diamond studded saw within 4-8 hours of casting of bay / slab etc. complete inc...
Vaccum de-watering with vaccum pump and suction mat and compaction with skin floater clubbed with floating disc including cost of. generator, HOM of machinery, Screed Vibratory, Power Floater, blade a...
Providing and laying Reinforced Cement Concrete pipe light dutyNP2 for culverts, roadway utilities& crossingsas per IS 458:2003in Single row including pointing ends and fixing collars withcement morta...
Construction of cement concrete kerb with channel with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M10 grade foundation 150 mm thick, kerb channel 300 mm wide, 5...
ADM Block GF, FF,work shop with store building
Earth work excavation by manual means for drains, canals, waste weir, draft,approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dra...
Earth work excavation by manual means for drains, canals, waste weir, draft,approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dra...
Providing and Filling in foundation with granite / trap broken metal 100mm. and down size & with approved sand including hand packing, ramming, watering, including cost of all materials and labour wit...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works &other parallel works from 0.50m to 3.50 m height. Th...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works &other parallel works from 0.50m to 3.50 m height. Th...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works &other parallel works from 0.50m to 3.50 m height. Th...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreadin...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in super structure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) ...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mo...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and remov...
Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of m...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18...
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colou...
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle gre...
Providing Mathi or Nandi wood frames for false ceiling, partitions etc., main battens of size 50x12.5mm at 600 mm c/c and cross battons 38mmx50mm at 600mm c/c sawn and putup including cost of materia...
Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden...
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspensio...
Providing and fixing factory made Green certified, Anti Termite, UV resistant,high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisin...
Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type...
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on spec...
Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome...
Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming...
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions ...
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windo...
Providing and fixing M.S. grills of required pattern in frames of win dows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to open...
Fully Perforated Gypsum Plaster Board of size 1200 x 2400x12.5 mm having approx. 15 % perforated area with perforation size and pattern as approved by the Engineer- in-charge and as per manufacturer's...
Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mi...
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...
Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the ...
Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer ...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with p...
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ...
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard ...
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular...
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour , 600 mm long towel rail with...
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ...
Providing and fixing PTMT bib cock of approved quality and colour.15mm nominal bore, 86 mm long, weighing not less than 88 g (CSR 2023-24/Vol- 2 / 118 / 13.17.1 )
Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, thi...
Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, thi...
Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, thi...
Providing, Laying and Fixing GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including t...
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at join...
Supplying S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work sit...
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...
Supply and delivery at site GM (copper alloy) gate valves confirming to Class-I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwed ...
Supply and delivery at site GM (copper alloy) gate valves confirming to Class-I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwed ...
Supply and delivery at site GM (copper alloy) gate valves confirming to Class-I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwed ...
Providing & fixing 455x610 mm cast iron cover with frame weight to be not less 38kgs (weight of cover 23 kgs and weight of frame 15 kgs)and necessary locking arrangements with M.S flats 32x6 mm etc & ...
Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size gra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in super structure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) ...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mo...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and remov...
Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of m...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Providing Mathi or Nandi wood frames for false ceiling, partitions etc., main battens of size 50x12.5mm at 600 mm c/c and cross battons 38mmx50mm at 600mm c/c sawn and putup including cost of materia...
Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden...
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspensio...
Providing and fixing factory made Green certified, Anti Termite, UV resistant,high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisin...
Providing and fixing M.S. grills of required pattern in frames of win dows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to open...
Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome...
Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming...
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions ...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle gre...
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colou...
Distempering with Oil Bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer ...
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with p...
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps (SRP Vol- 2 / 124 / 14.7.1 )
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular...
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ...
Providing and fixing white vitreous china water closet squatting pan (Indian type) : Orissa pattern W.C. pan of size 580x440 mm (SRP Vol-2 / 126 / 14.13.2 )
Providing and fixing 100 mm sand cast Iron grating for gully trap (SRP Vol-2 / 128 / 14.29 )
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...
Supply and delivery at site GM (copper alloy) gate valves confirming to Class-I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwe...
Supply and delivery at site GM (copper alloy) gate valves confirming to Class-I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwe...
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...
Dismantling of Cement Concrete Pavement Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 m3in volume and stock piling at designa...
Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...
Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...
Providing and Filling in foundation with granite / trap broken metal 100mm. anddown size & with approved sand including hand packing, ramming, watering,including cost of all materials and labour with ...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removi...
Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rende ring, pro...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...
Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete a...
Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...
Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long bracket...
Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Pr...
Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed ti...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...
Providing and laying Vitrified tiles with thickness 9-10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufa cturer , in all c...
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with...
Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders wi...
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually co...
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal exp...
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes of 150mm dia conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap fo...
Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal ...
Providing and fixing 100 mm sand cast Iron grating for gully trap.(SR 23-24 , vol -2,P-136/ 14.29)
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ...
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...
Providing and fixing of Aluminium composite panel of approved make and colour for wall cladding for Brick/Rcc/stone walls & coloumns/beamswith necessary aluminium frame works at required level made ou...
Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including allCPVC plain & brass threaded fittings, including fixing the pipe wit...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including allCPVC plain & brass threaded fittings, including fixing the pipe wit...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :. 25 mm nominal bore SR 23-24 ,vol 2, P-117/13.5.3)
Providing and fixing brass stop cock of approved quality 20 mm nominal bore ( SR 23-24 ,vol 2, P-117/13.3.2)
Providing and fixing PTMT Ball cock of approved quality, colour and makecomplete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball.40 mm nominal bore, 206mm long, weighing not less than...
Providing edge moulding to 18mm thick Granite stone counters, vanities etcincluding machine polishing to edge to give high gloss finish etc. completeas per design approved by Engineer-in-charge.( SR 2...
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangula...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete.(SR 23-24 ,vol II p-105/ 12.61)
Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete (SR 23-24 ,vol II p-105/ 12.62)
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :150x10mm (SR 23-24 ,vol II p-107/ 12.76.3)
Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5 mm (heavy type)(SR 23-24 ,vol II p-107/ 12.75.1)
Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gmsSR 23-24, (Vol II , P- 105/12.64, )
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and in cluding water thinnable priming coat with cement primer after t...
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint ...
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manufacture includ...
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appro priate sections and other sections of approved make conformin...
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windo...
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of...
Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the ...
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ...
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nomin...
Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g...
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with...
Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed ti...
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materia...
Construction of un-reinforced plain cement concrete pavement using RMC M-30 grade with OPC @ 270 kg/m3 and GGBS@ 90 kg/m3(75:25 proportion) as per approved mix design procedure and thickness as per de...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Cutting transverse contraction joints 3 to 4 mm wide and depth 60mm in concrete slab using concrete cutting machine with diamond studded saw within 4-8 hours of casting of bay / slab etc. complete inc...
Hydraulic Excavator of 0.9 m3 bucket for dispose the unwanted debries Loading SR23-24, (Vol 1 p n A-44 / Sl no 49)
Tipper-10 m3 for dispose the unwanted debries Loading SR23-24, (Vol 1 p n A-47 / Sl no 121)
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width u...
Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) tobrick/stone masonry including rounding off corners wherever requiredsmooth rendering, providing and removing scaffolding, including...
Construction of compound wall
Demolishing brick work manually/ by mechanical means including stack ing of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in...
Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of E...
Engaging Labour for Removing barbed wire fencing and ms angle fixed at cp wall top Etc and stack the same as directed by Engineer incharge (A49/ II Skilled )
Engaging Tipper-10 m3 to dispose the unwanted debries collected at dust bin including loading ,unloading transportation complete (SR 23-24,vol I p-A 47 / Sl No 121 )
Earth work excavation by manual means for drains, canals, waste weir, draft,approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dra...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1...
Forming Groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the ...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...
Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...
Fencing with G.I. barbed wire Angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and...
Painting with synthetic Enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with p...
Utility-R.C.C.drain,sump tank ,ETP, Security Block,OHT,Washing Ramp Singnage
Earth work excavation by manual means for drains, canals, waste weir, draft,approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dra...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works &other parallel works from 0.50m to 3.50 m height. Th...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works &other parallel works from 0.50m to 3.50 m height. Th...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreadin...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) tobrick/stone masonry including rounding off corners wherever requiredsmooth rendering, providing and removing scaffolding, including...
Earth work excavation for pipeline trenches by mechanical means as per drawing and technical specification, including setting out, construction of shoring, strutting, cost of blasting materials, barri...
Earth work excavation by manual means for drains, canals, waste weir, draft,approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dra...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) tobrick/stone masonry including rounding off corners wherever requiredsmooth rendering, providing and removing scaffolding, including...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remov...
Providing & fixing 455x610 mm cast iron cover with frame weight to be not less 38kgs (weight of cover 23 kgs and weight of frame 15 kgs)and necessary locking arrangements with M.S flats 32x6 mm etc & ...
Earth work excavation by manual means for drains,canaIs, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawi...
Earth work excavation by manual means for drains,canaIs, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawi...
Providing and Filling in foundation with granite / trap broken metal 100mm. anddown size & with approved sand including hand packing, ramming, watering,including cost of all materials and labour with ...
Providing and laying in position Cement Concrete for levelling course forall works in foundation. The granite/trap/basalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes m...
Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportat...
Providing and laying in position Cement Concrete for all Foundation works.The granite/trap/basalt crushed graded coarse aggregates and fine aggregatesas per relevant IS Codes machine mixed with super ...
Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel ...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcementincluding cost of all materials, machinery, labour, cleaning, straightening,cutting, bending, hooking, laping/welding joints, tying ...
Providing and constructing load bearing wall with Solid Concrete blocksof size 400x150x200mm having block density more than 1800kg/m3and minimum compressive strength of 4.00 N/mm2 conforming to IS2185...
Providing and laying in position Cement Concrete for levelling course forall works in foundation. The granite/trap/basalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes m...
Providing 18 mm cement plaster in two coats under layer 12 mm thickcement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and atop layer 6 mm thick cement plaster with cement mortar 1:3 (1 c...
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of ap...
Providing and fixing on wall face unplasticised Rigid PVC rain waterpipes of 150mm dia conforming to IS : 13592 Type A, including jointingwith seal ring conforming to IS : 5382, leaving 10 mm gap for ...
Constructing brick masonry chamber for underground C.I. inspectionchamber and bends with bricks in cement mortar 1:4 (1 cement : 4coarse sand) C.I. cover with frame (light duty) 455x610 mm internaldim...
laying different gradation of metal in sludge tank including complete as per direction of Engineer incharge. 53 mm size metal Vol 1, (A-38/8 )
40 mm size metal Vol 1, (A-38/7)
20 mm size metal Vol 1, (A-38/4)
6 mm size grit Vol 1, (A-38/1)
Painting wood work with Deluxe Multi Surface Paint of required shade.Two coat applied @ 0.90L/10 m² over an under coat of primer [email protected] L/10 m² of approved brand and manufacture to give an eve...
Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two coat applied @ 1.67 Itr/10 m* over and including priming coat of exterior primer applied @ 2.20 kg...
Engaging Labour to fill different gradation of metals to sludge tank in layer by layer (SR2023-24, VOL 1, P-A 49/ II)
Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, in...
Earth work excavation by manual means for drains, canals, waste weir, draft,approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dra...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreadin...
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) ...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removi...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1...
Providing 12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rende ring, pro...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colo...
Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1:6, 20 mm thick, and joints finished with cement mortar 1:3 over existing cement con...
Providing and fixing M.S. grills of required pattern in frames of win dows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to open...
Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...
Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete a...
Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...
Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the ...
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer ...
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with p...
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manufacture includ...
Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and te...
Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...
Providing and Filling in foundation with granite / trap broken metal 100mm. anddown size & with approved sand including hand packing, ramming, watering,including cost of all materials and labour with ...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) tobrick/stone masonry including rounding off corners wherever requiredsmooth rendering, providing and removing scaffolding, including...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing & fixing 455x610 mm cast iron cover with frame weight to be not less 38kgs (weight of cover 23 kgs and weight of frame 15 kgs)and necessary locking arrangements with M.S flats 32x6 mm etc & ...
Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and te...
Earth work excavation by manual means for drains, canals, waste weir, draft,approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dra...
Providing and Filling in foundation with granite / trap broken metal 100mm. anddown size & with approved sand including hand packing, ramming, watering,including cost of all materials and labour with ...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1...
UGT/oHT (inside) waterproofing with Anti-microbial Coating Providing and Applying two component, water-based food grade epoxy resin coating on inside surface of Potable water tank having anti-algae, ...
Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of ...
Painting wood work with Deluxe Multi Surface Paint of required shade.Two coat applied @ 0.90L/10 m² over an under coat of primer [email protected] L/10 m² of approved brand and manufacture to give an eve...
Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two coat applied @ 1.67 Itr/10 m* over and including priming coat of exterior primer applied @ 2.20 kg...
Providing & fixing 455x610 mm cast iron cover with frame weight to be not less 38kgs (weight of cover 23 kgs and weight of frame 15 kgs)and necessary locking arrangements with M.S flats 32x6 mm etc & ...
Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and te...
Providing and Filling in foundation with granite / trap broken metal 100mm. anddown size & with approved sand including hand packing, ramming, watering,including cost of all materials and labour with ...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1...
Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two coat applied @ 1.67 Itr/10 m* over and including priming coat of exterior primer applied @ 2.20 kg...
Providing and fixing RCC name board of size 1.35x0.60x0.04 m fixed in reinforced cement concrete poles of size 0.10x0.10x2.60m in cement concrete M 20 proportion using 20mm and down size graded metal ...
Providing & fixing Polymer rubberised factory made Black & Yellow coloured Speed retarders/Breakers with width 350mm & Height 50mm as per IRC 99:2018 with load carrying capacity upto 30t in local stre...
Providing Water based glossy paint (Green certified product) to Kerb Stones as per IS 164:2015 technical specifications including cleaning & surface preparation(CSR 2023-24/ Vol- 3 / P-78 / 8.52)
Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size mad...
Provision of red fluorescent with white reflective sleeve traffic cone made of low density polyethylene (LDPE) material with a square base of 390 x 390 x 35 mm and a height of 770 mm, 4 kg in wei...
Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 g/m2 area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC...
Supplying & fixing of Solar Raised Pavement Markers made of polycarbonate molded body with circular shape, solar powered, LED self illumination in active mode, 360 degree illumination and reflective p...
Installation of a steel portable barricade with horizontal rail 300 mm wide, 2.5 m in length fitted on a 'A' frame made with 45 x 45 x 5 mm angle iron section, 1.5 m in height, horizontal rail painted...
Utility - Electrical work
Internal Wiring: Open Conduit System: Supplying heavy gauge PVC conduit pipe 20mm dia 2 mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using i...
Supplying heavy gauge PVC conduit pipe 25mm dia 2 mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC ceil...
Supplying heavy gauge PVC conduit pipe 32mm dia 2.5mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC cei...
Concealed Conduit System: Supplying heavy gauge PVC conduit pipe 25 mm dia 2 mm thick with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. T...
Concealed Conduit System: Supplying heavy gauge PVC conduit pipe 20 mm dia 2 mm thick with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before concreting the slab. T...
Groove Cutting : Supplying heavy gauge PVC Conduit Pipe 25mm dia 2mm thick with suitable size bends, metal junction boxes adhesive paste etx., by groove cutting in the wall and fixing by using U or J...
Groove Cutting : Supplying heavy gauge PVC Conduit Pipe 25mm dia 2mm thick with suitable size bends, metal junction boxes adhesive paste etx., by groove cutting in the wall and fixing by using U or J...
Supplying and fixing of 25mm PVC casing and capping on the wall or ceiling using necessary materials like bends, screws at an interval of 300mm …. Etc as required.
CSR 2023-24,VOL-6,PART-III, SRP...
Supplying PVC flexible conduit pipe 25 mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an nterval of 300mm using NF s...
Supplying PVC flexible conduit pipe32 mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an nterval of 300mm using NF sc...
Supplyin And Fixing Metal Fan Box with Round Hook.CSR 2023-24,VOL-6, PART-III,
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS...
Extra for supplying 4mm thick white plastic plate and covering for junction boxes of size 110 mm conduit using necessary machine screws.
CSR 2023-24,VOL-6, PART-III, SRP 9 of 105 /3.10.3
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1X1.0 Sqmm (Earth wire) FRLS Multistrand FRLS PVC insulated copper wire( confir...
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1X1.0 Sqmm (Earth wire) FRLS Multistrand FRLS PVC insulated copper wire( confir...
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1X1.0 Sqmm (Earth wire) FRLS Multistrand FRLS PVC insulated copper wire( confir...
Supplying and flush mounting powder coated/galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall . ...
Supplying and flush mounting powder coated/galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall . ...
Supplying and flush mounting powder coated/galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall . ...
Supplying and flush mounting powder coated/galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall . ...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing of modular 6 Amps One way switch on existing modular switch plate.Make:Anchor /GM /Con a /Lisha. CSR 2023-24,VOL-6, PART-III, SRP 9 of 105 / 3.6.1.
Supplying and fixing of modular 6 Amps Two way switch on existing modular switch plate. Make:Anchor/GM/Cona/Lisha.
CSR 2023-24,VOL-6, PART-III, SRP 9 of 105 / 3.6.2.
Supplying and fixing of modular 6 Amps 3 way Socket on existing modular switch plate.Make:Anchor/GM/Cona/Lisha.
CSR 2023-24,VOL-6, PART-III, SRP 9 of 105 / 3.6.3.
Supplying and fixing of modular Stepped Fan Regulator on existing modular switch plate.Make:Anchor/GM/Cona/Lisha.
CSR 2023-24,VOL-6, PART-III, SRP 9 of 105 / 3.6.4.
Supplying and fixing of modular 16 Amps one way Switch on existing modular switch plate.Make:Anchor/GM/Cona/Lisha.
CSR 2023-24,VOL-6, PART-III, SRP 9 of 105 / 3.6.7.
Supplying and fixing of modular 6/16 Amps Universal socket on existing modular switch plate. Make:Anchor/GM/Cona/Lisha.
CSR 2023-24,VOL-6, PART-III, SRP 9 of 105 / 3.6.10.
Supplying and fixing of modular 32 Amps DP Switch on existing modular switch plate.Make:Anchor /GM / Cona /Lisha.
CSR 2023-24,VOL-6, PART-III, SRP 9 of 105 / 3.6.9.
Supplying and fixing of 6 Amps Bakelite lamp holder. Make: Anchor/GM/Cona/Lisha
CSR 2023-24,VOL-6, PART-III, SRP 10 of 105 / 3.14.7.
Supplying and fixing of 6 Amps Bakelite Ceiling Rose. Make: Anchor/GM/Cona/Lisha
CSR 2023-24,VOL-6, PART-III, SRP 10 of 105 / 3.14.5.
Luminaires / Lighting Fixtures & Accessories : Supplying of 4' feet - LED PVC square Batten 22W with integrated LED tube22 high quality diffuser with life of 25000 burning hours and 70% lumen mentaina...
Supply of recess mounting non integral type 1' X 1' 24 W luminaire comprising of pressure die cast/extruded alluminium houasing with spring loaded false ceiling clamps,Power LED's with CCT 6500 de...
Supply of recess mounting non integrated type LED down light 15-18 watt luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false celing clamps,LED of Power/COB w...
Supply of recess mounting non integral type 40-42 watts luminaire comprising of pressure die cast/extruded alluminium houasing with spring loaded false ceiling clamps,Power LED's with CCT 6500 degr...
LED Street light: Supply of LED Street light luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with i...
LED Flood light: Supply of LED flood light luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with inj...
LED Flood light: Supply of LED flood light luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with inj...
Fabrication, Supplying, Erection, Testing and Commissioning of 16 ms long Polygon high mast with Single/Multiple telescopic sections having, (minimum overlap distance of 1.5 times of top s...
Supplying of Ceiling fan with Capacitor rating as per guidelines of BEEE 5 Star rating and IS 374/79 and also comply with IS 1709/1984 with latest amendmdnet. Rated voltage 220 V / 50 Hz,Rated power i...
Supplying Wall mounting fan suitable to operate at single phase 230V A.C.Supply.400mm. Make:Bajaj/Usha/CG/Orient/Almonard/Khaitan.
CSR 2023-24,VOL-6, PART-III, SRP 30 of 105 / 6.5.2
Supplying exhaust fan of 1440 RPM of 300 mm (12") size with bracket blades complete for light duty suitable to operate on230V 50Hz, AC Supply.
Make: Crompton / Bajaj / Usha / Have...
Fixing all types and all capacities of fluorescent/false ceiling/spot light/CFL/LED fittings indoor on the wall / ceiling/ rafters / girders using 23/0.0076” twin twisted PVC insulated wires, requ...
Fixing all types and all capacities of 1'x4' / 2'x2' LED Light fittings indoor on the wall / ceiling / rafters / girders with necessary supporting frame, using 2310.0...
Supplying and Fixing 32 mm dia class A GI pipe bracket upto 2.7 meters long terminated with a reducing collar of 40x25mm to which extra pipe of 175mm length is fixed f...
Fixing halogen/metal hallide/SVL/IL /LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires complete.
CSR 2023-24,VOL-6, PART-I...
Fixing a ceiling/Wall mounting fan of all capacities and all types to the existing S hook with fan regulator to the existing board together with supplying and fixing a 5 amperes ceiling rose, necessar...
Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 amps ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire. CSR 2023-24,VOL-6, PAR...
Cubicle Panel boards & Control Switches: Fabricating supplying and mounting MS box made out 16 SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, p...
Fabricating supplying and mounting MS box made out 16 SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped...
Supplying 100 amps rated 3 phase with neutral bus bar using required capacity electrolytic alluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator wh...
Supplying 100 amps rated 3 phase with neutral bus bar using required capacity electrolytic alluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator wh...
Supplying 100 amps rated 3 phase with neutral bus bar using required capacity electrolytic alluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator wh...
Supplying 100 amps rated 3 phase with neutral bus bar using required capacity electrolytic alluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator wh...
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. ...
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 7...
Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C 50Hz 12/24v D.C.
CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 19 of 105, 5.38
Supplying fixing and wiring 50/5 to 400/5 Amps 5KVA burden Current Transformer. Class 0.5 accurecy with Tape wound.
CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 19 of 105, 5.34
Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH,KVAR suitable for 3 phase, 4 wire LT network wi...
Supplying & fixing and wiring 3 Phase Digital Ammeter / Voltmeter.
CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 19 of 105, 5.29
Supplying, fixing and wiring Earth Leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage cu...
Supplying & fixing of Shunt trip suitable for MCCB CBCT.
CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 17 of 105/ 5. 16.
Supplying of on load change over switches 4 poles, AC-23A Duty,415V, 50Hz, AC Supply withall accessories.(SM Enclouser sheet metal Execution). 200 Amps. Make:L&T/Snieder/Legrand/Havells/HPL/BIS appro...
Supplying of on load change over switches 4 poles, AC-23A Duty,415V, 50Hz, AC Supply withall accessories.(SM Enclouser sheet metal Execution).630 Amps. Make:L&T/Snieder/Legrand/Havells/HPL/BIS approv...
Fixing of 400 A TPST / change over switch / Contactor along with neutral link with screws, bolts, nuts and wiring using required capacity wires and circuit labelling. CSR 2023-...
Fixing of 200 A TPST / change over switch / Contactor along with neutral link with screws, bolts, nuts and wiring using required capacity wires and circuit labelling. CSR 2023-2...
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws,bolts, nuts and wiring complete. Protection of Overload and Short circuit with ther...
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws,bolts, nuts and wiring complete. Protection of Overload and Short circuit with ther...
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws,bolts, nuts and wiring complete. Protection of Overload and Short circuit with ther...
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws,bolts, nuts and wiring complete. Protection of Overload and Short circuit with ther...
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws,bolts, nuts and wiring complete. Protection of Overload and Short circuit with ther...
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws,bolts, nuts and wiring complete. Protection of Overload and Short circuit with ther...
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws,bolts, nuts and wiring complete. Protection of Overload and Short circuit with ther...
Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase ...
Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase ...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve , indicator ON/OFF, energy cross-3 with Short circuit breaking c...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve , indicator ON/OFF, energy cross-3 with Short circuit breaking c...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve , indicator ON/OFF, energy cross-3 with Short circuit breaking c...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve , indicator ON/OFF, energy cross-3 with Short circuit breaking c...
Supplying, fixing and wiring Automatic Power Factor controller fully, static units controlled by 14 stage microprocessor operation, relays LED display, self programming function for power stages and ...
Supplying ,fixing and wiring heavy duty low voltage capacitors conforming to IS 2834. 3 phase, 400/440 volts grade, for power factor improvement of rotating machinery. Cost per KVAR. Make:L&T/Siemens...
Supply and fixing of 3 pole Capacitor switching contactor with NO/NC contacts and inbuilt damping resistor to protect the contactor and capacitor from highest inrush current, fixed on existing wood...
L.T.Underground Cables: Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr including trial pits, depositing on bank upto a lead of 50 Mt...
Providing & Installing at site of work PVC pipes including cost of pipes & specials & labour,including lowering into trenxhes laying true to line , level & perfect linking at joints leak proof includi...
Providing & Installing at site of work PVC pipes including cost of pipes & specials & labour,including lowering into trenxhes laying true to line , level & perfect linking at joints leak proof includi...
Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, pla...
G I Pipe. 50mm dia.
G I Pipe. 100 mm dia G I Pipe.
CSR 2021-22,Volume-VI, SRP / 49/413-49.05.
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975. 10 ...
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975. 16 ...
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975. 25 ...
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975. 50 ...
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975. 95 S...
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975. 240 ...
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975. but ...
Labour charges for laying of 1.1 KV class UG cable when supplied agency in existing trench GI pipe / stoneware pipe / on wall / on pole as required. Inexisting trench/duct. 2.5 sqmm to 25...
Labour charges for laying of 1.1 KV class UG cable when supplied agency in existing trench GI pipe / stoneware pipe / on wall / on pole as required. On wall / Structures. 35 sqmm to 95 sq...
Labour charges for laying of 1.1 KV class UG cable when supplied agency in existing trench GI pipe / stoneware pipe / on wall / on pole as required. On wall / Structures. 300 sqmm to 400 ...
Supplying and fiixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only) , 25mm size.
CSR 2023-24, Volume-6, Part-III ,Lbaour charges, SRP 28 of 81, 507 /63.01
45mm Brass Cable gland.
CSR 2023-24, Volume-6, Part-III ,Lbaour charges, SRP 28 of 81, 507 /63.01
Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes.10 Sqmm size.
CSR 2023-24, Volume-6, Part-III ,Labour charges, SRP 27 of 81, 469 /60.01
Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes.16 Sqmm size.
CSR 2023-24, Volume-6, Part-III ,Labour charges, SRP 27 of 81, 470 /60.02
Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes.25 Sqmm size.
CSR 2023-24, Volume-6, Part-III ,Labour charges, SRP 26 of 81, 457 /59.01
Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes.50 Sqmm size.
CSR 2023-24, Volume-6, Part-III ,Labour charges, SRP 26 of 81, 459 /59.03
Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 95 Sqmm size.
CSR 2023-24, Volume-6, Part-III ,Labour charges, SRP 26 of 81, 461 /59.05
Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 300 Sqmm size.
CSR 2023-24, Volume-6, Part-III ,Labour charges, SRP 26 of 81, 467 /59.11
Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 400 Sqmm size.
CSR 2023-24, Volume-6, Part-III ,Labour charges, SRP 26 of 81, 468 /59.12
Digging of Pit 2.5 Mtr depth for erection of 11 Mtr long Tubular Spun Pole as per approved Drawing.
CSR 2023-24, Volume-6, Part-III ,Labour charges, SRP 43 of 81, 18 / 1.5.2
Pre-Stressed Tubular Spun Pole - 11 Mtr Long, 500 Kg WL
(Dwg No. BESCOM/GM/QS&S/45 Dtd 24.11.2018) as per IS-13158: 1991.
CSR 2023-24, Volume-6, Part-III ,Labour charges, SRP 3 of 81, 7 / 1.0.7
Erection of 11 Mtr long Concrete Spun Pole in a pit of 2.5 Mtr depth (Mechnised Labour).CSR 2023-24, Volume-6, Part-III ,Labour charges, SRP 44 of 81, 33 / 2.0.5
Pole Concreting with CC 1:2:4 (without coping). 11 MtrSpun Pole.
CSR 2021-22, Volume-6, Part-III ,Labour charges, SRP 36/1.8.2
Construction of platform with size stone, cement concert for erection of 500 kVA Transformer/Metering cubicle/Heavy Equipment.
Construction of platform (1.5x1.5x1.2) Mtr in size ...
Three H Frame without Transformer Seating and Seating angle support cross arm for 11 Mtr Spun Pole for 63/100/250/500 kVA (UG Cable) - MS
(Dwg No. BESCOM/GM/QS&S/69 Dtd 24.11.2018)
CSR 2023-24, Volume...
9 kV, 5 kA Lightning Arrester Metal Oxide Ceramic type with GROUND DISCONNECTOR
(Dwg No. BESCOM/GM/QS&S/26 Dtd 24.10.2007).
CSR 2023-24, Volume-6, Part-III ,Labour charges, SRP 9 of 81, 137 / 19.01.
11 kV, HG Fuse Unit with Solid Core Insulator (Dwg No. BESCOM/GM/QS&S/21 Dtd 24.11.2018).
CSR 2023-24, Volume-6, Part-III ,Labour charges, SRP 9 of 81, 139 / 20.01.
11 kV, 200 Amps Single Break GOS (Dwg No. BESCOM/GM/QS&S/23 Dtd 24.11.2018)
CSR 2023-24, Volume-6, Part-III ,Labour charges, SRP 11 of 81, 166 / 24.01.
Hiring of crane for erection of 250/500 kVA Transformer (applicable for maintenance works only and in case of non - availability of departmental crane)CSR 2021-...
11 kV, 3 Core, XPLE HTUG Cable with pressure extruded inner sheeth, ROUND WIRE ARMOURED as per IS-7098 (Part-2) Armouring wires dia and Resistivity as per IS-3975. 150 SQMm (59 GI Wires-2.5mm Dia.)
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff.
CSR 2023-24, Volume-6, Part-III ,11 Kv Materials, ...
Heat Shrinkable Outdoor Type Cable Termination Kit for XLPE Cable.
CSR 2023-24, Volume-6, Part-III ,11 Kv Materials, SRP 20 of 81, 350 / 45.08.
Heat Shrinkable Straight Through Jointing Kit for XLPE Cable with Copper Lug & Al Ferrule. 3X 240 SQmm.
CSR 2023-24, Volume-6, Part-III ,11 Kv Materials, SRP 21 of 81, 359 / 43.17.
Cable Joint and wiring (for HT Cable only).Heat shrinkable straight Through Joint.
3 X 95 to 3X150SQmm.
CSR 2023-24, Volume-6, Part-III ,11 Kv Materials, SRP 52 of 81, 179/22.01.
Making and Fixing pot head for HT Cable only. Heat shrinkable type Termination.
3X95 to 3X150SQmm.
CSR 2023-24, Volume-6, Part-III ,11 Kv Materials, SRP 52 of 81, 179 /22.04.
Digging of Pit for providing GI Pipe type Earthing. ordinary Soil.
CSR 2023-24, Volume-6, Part-III ,Utilization, SRP 43 of 81, 21 / 1.6.1.
Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipments on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit … The pit sh...
Supplying and running of Copper strips for grounding connections, using necessary fixing materials as required.25X 3 mm G I Strip. CSR 2023-24, Volume-6, Part-III , SRP 54 of 105, 461 / 12.58.2.
Supplying and running of Copper strips for grounding connections, using necessary fixing materials as required. 600X600X3mm Copper Plate.
CSR 2023-24, Volume-6, Part-III , SRP 55 of 105, 461 / 12.58.1...
Supplying erecting testing and commissioning of voltage stabilizer suitable for 170 to 270V input and load variation from no load to full load with over load protection, spike suppression,operating at...
LAN Wiring: Supplying and drawing UTP- CAT 6E LAN cable. BIS approved make
CSR 2023-24, Volume-6, Part-III , SRP 36 of 105 / 8.1.
Supplying & fixing of switch mounting rack with power manager & Cable manager.18 U with 650mm depth. CSR 2023-24, Volume-6, Part-III , SRP 36 of 105 / 8.4.5
Supplying & fixing of Network switches. 48 port 10/1000 switch.
CSR 2023-24, Volume-6, Part-III , SRP 36 of 105 / 8.9.4
Supplying & fixing of I/o Socket with back box.Single I/o.
CSR 2023-24, Volume-6, Part-III , SRP 36 of 105 / 8.10.1
Supplying & fixingof 2mtr Cat 6 Patch cable.
CSR 2023-24, Volume-6, Part-III , SRP 37 of 105 / 8.11.1
Providing Submersible Pumpset of 150mm dia suitable for borewell and confirming to IS 8034-2000, 3 Phase , SS Bowl & Impeller with Low volt Motor as per specifications, to work site as per necessary a...
Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI mark and as per its latest amendments.1X3X4 SQ...
Supply & delivery of galvanised mild steel tubes of 6 mtr standard length heavy duty (c ) class as per IS 1239 (Part-I) 1990 with latest amendments with ISI mark (one end fitted with Heavy Duty coll...
Providing chain link fencing 50 mm size of 8 guage properly stretched between rectangular Poles and fixed with suitable bolts & nuts, the free ends shall be welded to the P...
Utility - High mast
Fabrication, Supplying, Erection, Testing and Commissioning of 16 ms long Polygon high mast with Single/Multiple telescopic sections having, (minimum overlap distance of 1.5 times of top ...
LED Flood light: Supply of LED flood light luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with inj...
Fixing halogen/metal hallide/SVL/IL /LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires complete.CSR 2023-24,VOL-6, PART-II...
Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr including trial pits, depositing on bank upto a lead of 50 Mtr, . In Hard Soil. ...
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975. 16 ...
Labour charges for laying of 1.1 KV class UG cable when supplied agency in existing trench GI pipe / stoneware pipe / on wall / on pole as required. Inexisting trench/duct. 2.5 sqmm to 25 Sqmm size....
Providing laying & Jointing of HDPE pipes of specified grade and confirming ti IS 4984-2016 with latest mendmdnets and conveying to work site including loading and un loading at both destinations an...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve , indicator ON/OFF, energy cross-3 with Short circuit breaking c...
Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., co...
Supplying and fixing Microprocessor Based Astronomical timer Switch with using necessary bolts, nuts and washers. Make:BIS Approved.SR 2023-24, Volume-6, Part-III ,Utilization, SRP 16 of 105 /...
Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipments on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit … The pit sh...
Utility - Fire fighting
Supply,Erection, testing & commissioning of electrical motor driven end suction back pull out centrifugal pump capable of delivering adequete LPM at required head. When running at 2900 RPM directly co...
Supplying,installation,testing & commissioning of diesel engine driven pump horizontal mounted, Horizontal splitcase centrifugal single stage pump .capabel of delivering required flow at required hea...
Supplying, Installing testing and commissioning electrically driven jockey pump of capacity 180.0 Lpm at required head end suction type bronze impeller pump oupled to electrical driven motor with su...
Supplying,errection and commissioning of Fire Fighting panel cubicle type made out of 14/16 SWG MS CRCA sheet which is derusted, degreased, phosphated and passivated with angle iron skelton or sheet f...
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975. 50 S...
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff.L T Cable. CSR 2023-24. SRP 52 of 18, 175/21.06.
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975.16 SQ...
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff.L T Cable. CSR 2023-24. SRP 52 of 18, 174/21.05.
Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC...
Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC...
2 mm thick perforated cable G I tray with on existing M S angle support using necessary G I bolts /nuts and washer or welding as required.150 X 50mm. BIS Approved make.CSR 2023-24. SRP 55 of 105, / 1...
G I Strips for grounding connections, using necessary fixing materials as required.25 X 6mm
G I Strip. CSR 2023-24. SRP 54 of 105, / 12.58.3.
Supply, Installation testing and commissioning of approved make heavy quantity (Class 'C') confirming to as per IS1239 Such as Tees elbows check nuts unions, Flanger, Nipples etc. including cutting we...
200 mm dia nominal dia ( 6mm thick). CSR 2023-24. SRP 93 of 105, / 15.118.2.
150 mm dia nominal dia ( 6mm thick). CSR 2023-24. SRP 93 of 105, / 15.118.3.
100 mm dia nominal dia ( 6mm thick). CSR 2023-24. SRP 93 of 105, / 15.118.4.
80 mm dia nominal dia ( 6mm thick). CSR 2023-24. SRP 93 of 105, / 15.118.5.
50 mm dia nominal dia ( 6mm thick). CSR 2023-24. SRP 93 of 105, / 15.118.7.
25 mm dia nominal dia ( 6mm thick). CSR 2023-24. SRP 93 of 105, / 15.118.10.
Supplying and installing testing and commissioning of C I "Y" stainer confirming to IS standard with necessary bolts and nuts complete includes cost of all materials labour charges with all lead & li...
100 Dia "Y"Stainer.CSR 2023-24. SRP 93 of 105, / 15.129.3. Make:KARTAR/ NVR.
Supplying and installing testing and commissioning of PN 16 C I "Non Return Valve" confirming to IS 13039 with necessary bolts and nuts etc complete includes cost of all materials labour charges wit...
Supplying and installing testing and commissioning of PN 16 C I butterfly valves of confirming to IS 13039 with necessary nuts & bolts etc, complete as per specification with all lead and lift, load...
150 mm dia C I Butterfly Valves. CSR 2023-24. SRP 94 of 105, / 15.127.2.
100 mm dia C I Butterfly Valves. CSR 2023-24. SRP 94 of 105, / 15.127.3.
80 mm dia C I Butterfly Valves. CSR 2023-24. SRP 94 of 105, / 15.127.4.
50 mm dia C I Butterfly Valves. CSR 2023-24. SRP 94 of 105, / 15.127.6.
Supplying and installing testing and commissioning of PN 20 Rating Flexible Rubber Bellows, sunle arch complete withpair of S S Flanges, nuts, bolts and gasket etc, 200 mm dia. Make: EASYFLEX/RESISITO...
150 mm dia - do-
100 mm dia -do-
Supplying and installing testing and commissioning of Air Vessel tank of min capacity of 100 ltr.
Supplying and installing testing and commissioning of Gun Metal Ball Valve Size of 19/20mm dia including cost of materials, labour, usage charges of machinery complete as per specifications, comple...
25 MM dia -do- CSR 2023-24. VOL-6, SRP 94 of 105, / 15.126
Supplying and installing testing and commissioning of Pressure switches of suitable range for pumpsets with fittings like Unions/ Collors/ reducers etc. Make:DANFOSS/ INDFOSS.
Supplying and installing testing and commissioning of Pressure gauges, glyserine filled of suitable range 150mm dia with syphone tube, syphone cock , fitttings etc. complete.Make: H-GURU.
Supplying and installing testing and commissioning of air release valve, 25mm dia threaded type.
Supply, fabrication and errection of M S Supports as per approved design & drawing consisiting of channels , angles of appropriate sizes as required.
Supply, Installation testing and commissioning of approved make heavy quantity (Class 'C') confirming to as per IS1239 Such as Tees elbows check nuts unions, Flanger, Nipples etc. including cutting we...
150 mm dia nominal dia ( 6mm thick). CSR 2023-24. SRP 93 of 105, / 15.118.3.
100 mm dia nominal dia ( 6mm thick). CSR 2023-24. SRP 93 of 105, / 15.118.4.
80 mm dia nominal dia ( 6mm thick). CSR 2023-24. SRP 93 of 105, / 15.118.5.
65 mm dia nominal dia ( 6mm thick). CSR 2023-24. SRP 93 of 105, / 15.118.6.
50 mm dia nominal dia ( 6mm thick). CSR 2023-24. SRP 93 of 105, / 15.118.7.
40 mm dia nominal dia ( 6mm thick). CSR 2023-24. SRP 93 of 105, / 15.118.8.
32 mm dia nominal dia ( 6mm thick). CSR 2023-24. SRP 93 of 105, / 15.118.9.
25 mm dia nominal dia ( 6mm thick). CSR 2023-24. SRP 93 of 105, / 15.118.10.
Wraping & Galing of U/ G pipe line work includes one coat of anti corrossion paint (Black) and two coats of Bituminous cloth, including cost of materials, labour usage charges of machinery complete a...
80 mm dia -do- CSR 2023-24.VOL-6, SRP 91 of 105 /15.98.4.
FIRE HYDRANT SYSTEM Supplying Installing, testing and commissioning of 63mm mm dia single headed Gun mental Hydrant Valve with flanged inlet, stop valve, spindle and cast iron hand wheel. It has a fem...
Supplying Installing, testing and commissioning of Reinforced Rubber Lined RRL Fire hose of 63mm dia 15m length as per IS 8423 binded with one set of male and Female lnstantainious Gun metal c...
63 X 20mm S S Short branch pipe Nozzle, ISI Marked confirming to IS 903:1993 suitable for connection fire hose pipe coupling as complete in all respect.
M.S. Pressed reel of 600mm dia swinging type motion which allows a 180degree swing and conforms to IS:884/85 or Aluminium fitting Single Piece Compact Type. including cost of materials, labour, usag...
Supplying Installing, testing and commissioning of Hose cabinet made out of 18 gauge M.S.sheet with double glass door with lacing arrangement and painted with two coats of Fire red Enamel paint at out...
Supplying and installing testing and commissioning of PN 16 C I butterfly valves of confirming to IS 13039 with necessary nuts & bolts etc, complete as per specification with all lead and lift, load...
150 mm dia C I Butterfly Valves. CSR 2023-24. SRP 94 of 105, / 15.127.2.
100 mm dia C I Butterfly Valves. CSR 2023-24. SRP 94 of 105, / 15.127.3.
65 mm dia C I Butterfly Valves. CSR 2023-24. SRP 94 of 105, / 15.127.5.
Supplying and installing testing and commissioning of 150mm dia 4 way Fire brigade inlet connection with Non return valve of 4 nos 63 mm dia including cost of materials,usage charges of machinery c...
Supplying Installing, testing and commissioning of pendent Type / Upright Type Standard Response , Standard Coverage, Sprinkler , K 5,6 (80),1/2" NPT, 68 degrees centegrad FIRE complete Chr...
Supplying Installing, testing and commissioning of Gun metal AIR RELEASE VALVE SIZE OF 25mm dia including cost of materials, labour, usage charges of machinery complete as per specifications. Comp...
Supplying Installing, testing and commissioning of Gun Metal Ball Valve size of 25mm dia including cost of materials, labor, usage charges of machinery complete as per specifications complete. Make:...
Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing fixing in position and applying a priming coat ...
Supplying Installation testing and Commissiong of Micro precess base Fire alram Control panel having power regulation Circuit, which conner to 230 AC to @V.D.C. Indicating FIRE-FAULT, Test faci...
Supply Installation testing & Commissioning of conventional type photo/Heat electric smoke sensor with flashing LED capable of woking at 9V to 33 V DC .The Optical Smoke Detector is unaffected by wind...
Supplying Installing, testing and commissioning of Resettable type Manual Call point . works on 24V DC LED indicator with glass Fronted. Fire Symbol .The red Manual Call Point is approved to EN5...
Supplying Installing, testing and commissioning of 1 KM range notorised Siren with required relay module and accessories complete. The Siren will require A C Current supply.
Supplying & drawing of 2 Core 1.5 SQmm copper conductor armoured cable.
Supply and Installation of 4.5kG , CO2 gas valve type Fire Extinguisher, Trolley Mounted, Easy Weight management used Unused Mechanism, Gross Weight 19.1 Kg empty weight. 14.6 kG Can Height 860 MM D...
Supply and installation in position, testing and commissioning 6 kG Fire Ex tinguisher Mono Ammonium Phos phate Powder 50, Stored Pressure Type, Pressure Gauge, Gross Weight 9.5 ...
Providing 9kg Fire Extinguisher Mono Ammonium Phosphate Powder 50, Stored Pressure Type, Pressure Gauge, Gross Weight 14.90 Kg, empty weight 5.90 Kg, Can Height 615MM...
Supply, installation of Mechanical Foam type fire extinguisher with wall mounting bracket etc, Complete, confirming to IS 15683. 9 ltr capacity.
45 ltr Capacity, trolley mounted. Make:SAFEPRO / EQ.
Supplying of 4 Nos sand buckets with handle, round bottom type, 9 lts capacity. Painted red outside and white inside with letters "F I R E" in black written out side,mounted on M S fabricated st...
Providing & fixing SIGNAGES of suitable size made of PVC rigid sheet 3 mm thick computer cut PVC non reflective self adhesive imported vinyl painted on the front of PVC rigid sheet complete with wall...
Providing & Fixing signage board of "FIRE ORDER" on 5 mm thick "Opaque" PVC foam board of computerised cut, PVC non- reflective self ashesive vinyle painted foam board.
Dismantling, OHT, RO Plant
Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material to the appropriate disposal area as per direction of Engineer-in-charge Asbestos cement sheet (SR 2023-...
Dismantling steel work manually/ by mechanical means in built up sections without dismembering and stacking to the appro priate disposal area as per direction of Engineer-in-charge.(SR 2023-24 ,vol II...
Demolishing R.B. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-ccharge.(SR ...
Dismantling tile work in floors and roofs laid in cement mortar includ ing stacking material to the appropriate disposal area as per direction of Engineer-in-charge For thickness of tiles above 25 mm...
Demolishing brick work manually/ by mechanical means including stack ing of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in...
Engaging Labour for Removing Doors and Windows ,Ventilaters From Walls Aluminium Partition Etc and stack the same as directed by Engineer incharge (A49/ II Skilled )
Disposal of building rubbish / malba / similar unserviceable, dismantled
or waste materials by mechanical means, including loading, transporting,
unloading to approved municipal dumping ground or as a...
Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and te...
Providing and Filling in foundation with granite / trap broken metal 100mm. anddown size & with approved sand including hand packing, ramming, watering,including cost of all materials and labour with ...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and constructing load bearing wall with Solid Concrete blocksof size 400x200x200mm having block density more than 1800kg/m3and minimum compressive strength of 4.00 N/mm2 conforming to IS2185...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Providing and laying Vitrified tiles with thickness 9-10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufa cturer , in all c...
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and in cluding water thinnable priming coat with cement primer after t...
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint ...
Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g...
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manufacture includ...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including allCPVC plain & brass threaded fittings, including fixing the pipe wit...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :. 25 mm nominal bore SR 23-24 ,vol 2, P-117/13.5.3)
Providing and fixing PTMT Ball cock of approved quality, colour and makecomplete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball.40 mm nominal bore, 206mm long, weighing not less than...
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ...
Providing and fixing aluminium work for doors, windows, ventilatorsand partitions with extruded built up standard tubular sections/appropriate sections and other sections of approved make conforming t...
Providing and fixing 12 mm thick prelaminated particle board flatpressed three layer or graded wood particle board conforming to IS: 12823Grade l Type ll, in panelling fixed in aluminum doors, windows...
Providing and fixing glazing in aluminium door, window, ventilatorshutters and partitions etc. with EPDM rubber / neoprene gasketetc. complete as per the architectural drawings and the directions of e...
Water purification plants: Providing, Installation and Commissioning of automatic Water purification plant (RO+UF) with all accessories piping, product water tank on single phase power supply as pe...
Engaging Labour for Removing and shifting of debtries as directed by Engineer incharge (A49/ II Skilled )
Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and te...
Earth work excavation by manual means for drains, canals, waste weir, draft,approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dra...
Providing and Filling in foundation with granite / trap broken metal 100mm. anddown size & with approved sand including hand packing, ramming, watering,including cost of all materials and labour with ...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreadin...
Providing and laying in position Cement Concrete for all Foundation works.The granite/trap/basalt crushed graded coarse aggregates and fine aggregatesas per relevant IS Codes machine mixed with super ...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing and constructing load bearing wall with Solid Concrete blocksof size 400x150x200mm having block density more than 1800kg/m3and minimum compressive strength of 4.00 N/mm2 conforming to IS2185...
Providing and laying in position Cement Concrete for levelling course forall works in foundation. The granite/trap/basalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes m...
Providing 18 mm cement plaster in two coats under layer 12 mm thickcement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and atop layer 6 mm thick cement plaster with cement mortar 1:3 (1 c...
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of ap...
Providing and fixing on wall face unplasticised Rigid PVC rain waterpipes of 150mm dia conforming to IS : 13592 Type A, including jointingwith seal ring conforming to IS : 5382, leaving 10 mm gap for ...
Constructing brick masonry chamber for underground C.I. inspectionchamber and bends with bricks in cement mortar 1:4 (1 cement : 4coarse sand) C.I. cover with frame (light duty) 455x610 mm internaldim...
Painting wood work with Deluxe Multi Surface Paint of required shade.Two coat applied @ 0.90L/10 m² over an under coat of primer [email protected] L/10 m² of approved brand and manufacture to give an eve...
Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two coat applied @ 1.67 Itr/10 m* over and including priming coat of exterior primer applied @ 2.20 kg...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Annexure - C Machinery.doc
Others - Annexure C - Key & Critical Equipments • 0.03 MB
NIT - EV Depot at Hubli.docx
Instructions to Tenderers • 0.39 MB
Annexure - B_Bid Capacity new.doc
Others - Annexure B - Bid Capacity • 0.03 MB
Annexure - A_Letter_of Credit new.doc
Others - Annexure A Letter of credit • 0.03 MB
Download all tender documents and submit your bid