CA NO CWE/CHM-12/2020-21 ADDN/ALTN OF MD ACCN IN CHANDIMANDIR MIL STN

Amount

Demolition of brick work masonry, built in CM including all quions,arches, pillars, etc but exc and Ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.

M&L brick work with sub class 'B' bricks, straight or curved on plan exc 6M mean radius built in CM 1:6 complete all as specified and directed.

M&L brick work with sub class 'B' bricks straight or curved on plan to any radius built in CM (1:4) as in half brick thick walls complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

M&L for vitrified colour/printed ceremic tiles double charged premium quality 10mm thick (square/ rectagular) polished area of each tile n. exe 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match over and incl 15mm thick screed bed in CM (1:6) complete all as specified and directed.

All as per item No 5 here-in-before but on vertical surfaces.

M&L for Coloured Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exc. 0.18 sqm but n. exc. 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade over and incl 15 mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L for coloured glazed ceramic tiles in skirting/dado of size 300 x 450x 7mm over and incl 10 mm thick rendering in CM 1:4 for receiving the tiles complete all as specified and directed.

M&L for Coloured Non skid ceremic tiles 7 to 8mm thick square/ rectangular area of each tile exceeding 0.11 sqm but not exc. 0.18 sqm as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and incl 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons laid bedded and pointed in any mortor etc. complete all as specified and directed.

M&L for 18 to 20 mm thick black granite slab for kitchen slab, window cill and counter top etc. (width and length as per site requirement) bedded over and including 20mm thick screed bed or bedding layers in CM 1:4 including making holes and bullnozed moulding on edges and jointed with cement slurry and pointed with white cement with the admixture of pigment to match complete all as specified and directed.

12-16 mm thick, baroda green marble, machine cut laid over & including 10mm thick average thicknesss) cement mortar 1:4 bedded and jointed with grey cement slurry and pointed with grout of matching shade including moulding and all necessary cutting & and machine polishing (table rubbed and polished), as in kitchen plateform, and the like complete all as specified.

M&L for making holes into or through concrete slabs/ stone slabs n.exc 25 mm dia 150 mm long for 25mm dia pipe as in cooking plateform, incl making good complete.

Demolition/dismantling of reinforced concrete such as beams, staircase, landing, chajjas, facia and similar suspended work (reinforcement cut as required to facilitate demolition) complete all as specified and directed.

M&L for reinforced cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate ) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping) rough finished surfaces of concrete complete all as specified and directed.

M&L TMT bars 10mm dia & over, cut to length, bent to shape reqd including cranking, bending spirally for columns, hooking ends & binding with MS wire annealed not less than 0.9mm dia welding as required at site as directed and specified etc complete.

All as per item No 17 here-in-before but bars 8mm dia and over upto 10mm dia as in stirrups, spacers complete all as specified.

Taking down cement plaster on brick/stone wialls etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and directred.

M&L for 15mm thick rendering in Cement and Sand mortar 1:6 over brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15mm thick rendering in Cement and Sand mortar 1:4 over brick or concrete (external) surfaces using WPC and finished the surface even and fair without using extra cement complete all as specified and directed. Note :- WPC shall be measured and paid separately.

Rendering 5 mm thick on fair faces of concrete surfaces, fininshed even and smooth without using extra cemnt on ceiling in cement mortar 1:3 complete all as specified and directed.

M&L for dubbing out average 15mm thick on irregular faces of walls, exposed reinforced surfaces, in CM 1:4 complete all as specified and directed.

M&L for preparation of new plastered surface and applying two coats of exterior acralic paint on wall surfaces @ 5sqm/litre (each coat) over and incl one coat of exterior wall primer 11 sqm/litre complete all as specified and directed.

Complete removal of existing treatment of any type/description such as cement base paint, external emulsion etc from external surfaces of walls/RCC surfaces/soffits of chajjas/roof projection/cantilevers/balconiey etc with mechanical means/grinder and applying two coats of exterior emulsion paint (light shade) @ 5 Sqm/litre over & including a coat of exterior wall primer@ 11Sqm/litre as recommended for under coat by manufacturer of exterior emulsion complete all as specified and directed. Note for item No 24 & 25 :- Make of exterior wall primer: Asian/ Berger/ Nerolac (Best quality). Make of exterior emulsion: Asian (Apex ) / Berger (Weather Coat Anti Dust) / Nerolac (Excel total).

Preparation of new surfaces of any description of walls,facia, ceiling, RCC etc and applying two coats of oil bound distemper @ 10Sqm/litre over and including one coat of interior wall primer @10Sqm/litre over and including 1.5 mm to 2.5mm thick wall care putty and sand papering making the surfaces even and smooth complete all as specified and directed.

Three coats of white wash on ceiling of any description including preparation of new/existing plastered surfaces complete all as specified and directed.

Complete removal of existing treatment of any type/description viz distemper,white wash etc from walls,facia, ceiling, RCC with mechanical means/grinder completiy and applying two coats of oil bond distemper @ 10Sqm/litres over and including one coat of interior wall primer @10Sqm/litres over and including 1.5 mm to 2.5mm thick wall care putty and sand papering making the surfaces even and smooth complete all as specifed and directed.

Complete removal of existing treatment of any type/description viz cement base paint,external emulsion etc from plastered or unplastered surfaces of walls,chhajjas, facia,cantilivers,RCC etc with mechanical means/grinder completely and applying two coats of cement base paint with and including necessary scaffolding and safety arrangements complete all as specified and directed.

Note for item No 28 & 29:- Complete removal of existing treatment (internal/external) shall be approved by the GE before applying primer. Also 1st coat of finishes shall be approved by the GE before applying 2nd coat. Proper record thereto shall be maintained and to be produced to the inspecting officials on demand.

M&L preparation of old plastered wall surfaces and applying two coat of white wash complete all as specifed and directed.

Taking down chowkhats/frames exc 1.5 Sqm but n.exc 4 Sqm including shutters (without taking off shutters from the frames complete all as specified and directed.

Taking down chowkhats/frames n.exc 1.5 Sqm including shutters (without taking off shutters from the frames) including grill etc complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm but n.exc 2 Sqm complete all as specified and directed.

S&F factory made pressed steel frames having profile 125mm x 60mm for doors with one or more rebates made out/fabricated of 1.25 mm thick MS sheet, including necessary fixing lugs/hold fasts, hinges, lock strike plate, etc.including filling in PCC 1:3:6 type C0 as back fill of pressed steel frame complete all as specified & directed.

All as per item No 34 here-in-before but profile 105mm x 60mm.

Factory made, flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, 35 mm thick, ISI marked, complete all as specified.

S&F framed work such as grills, gratings etc framed guard bars, ladders and railings etc conforming to Fe-290 Gde E-165 complete all as specified.

Supply and fixing Factory made steel window box type with side hung shutters including box type hinges, 125mm steel handle-02 Nos mild steel ISI marked tower bolt 125mm size (minimum 2 for each shutter) complete with glazing bars, dovetailed or welded fixed as in repair complete all as specified and directed.

Supply and fixing Factory made steel window box type with side hung shutters including box type hinges, 125mm steel handle-02 Nos mild steel ISI marked tower bolt 125mm size (minimum 2 for each shutter) complete without glazing bars, dovetailed or welded fixed as in repair complete all as specified and directed.

Supply and fixing factory made box type steel ventilators including one shop coat of red oxide primer, hinges, tower bolts 100 mm, steel handles and steel peg stay complete without glazing bars devetailed or welded complete.

Supply and fixing 3mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty (or beading) in square n. exc. 0.5 sqm in each panes complete all as specified and directed.

Supply and fixing 4mm thick figured glass pin head type ordinary quality any size and in any type of frame and glazing with oil putty (or beading) in square n. exc. 0.5 sqm in each panes complete all as specified and directed.

Supply and fixing IInd class soft wood, plain, solid, straight chowkats and frames,framed rebated on the solid, rounded put together with glue pinned at joints all as specified and directed.

S&F 100 mm size butt hinges medium weight cold rolled mild steel complete all as specified and directed.

Framed work as in brackets,stands for coolers etc. Fabricated out of angle or other section with gusset plates, rails, braces, etc., complete, drilled ,bedded, fixed firmly to walls, fastening with and including suitable Number of self locking nuts and bolts of length 75mm to 100mm and 12mm dia all as per site requirement complete all as specified and directed.

S&F 35 mm thick second class hard wood (three panel,divided into sub panels with provn of one vertical rail in full height) glazed and skelton shutters open rebated prepared to received gauge glass etc, edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass complete all as specified and directed.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

Refixing of shutters in the same opening including taking down, easing and adjusting complete.exc 1.00 sqm and not exc 2.00 sqm each complete all as specifed and directed.

M&L preperation of new steel surface of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete all as specified and directed.

All as per item No 49 here-in-before but except primer.

M&L preperation of new wooden surface of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L one coat of synthetic enamel paint on old steel surfaces of any description exc 10 cms width/girth including prepration of surfaces complete all as specified and directed.

M&L one coat of synthetic enamel paint on old wooden surfaces of any description exc 10 cms width/girth including prepration of surfaces complete all as specified and directed.

S&F factory made solid PVC frames having profile 75mmx50mm for doors with one rebate homogeneous fine cellular structure having density of 750 smooth outer integral skin with suitable metal stiffners and fixed with 100x8mm sheet metal screws complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:),homogenous fine cellular structure having density not less than 500 smooth with two, four, six raised panel design fixed in frame at site as per manufacturer's Instructions complete all as specified and directed.

S&F 100mm size butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed for PVC door, type C-21 complete all as specified and directed.

S&F mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as spacified and directed.

Aluminium, anodized barrel tower bolts of extruded section and fixed, 200 mm long, dia of bolt not less than 10 mm, ISI marked, complete all as specified and directed.

All as per item No 58 here-in-before but tower bolt of size 150mm.

Aluminium alloy, anodized, sliding door bolts with hasp staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium, 300 mm long and dia of rod not less than 16 mm, ISI marked, complete all as specified and directed.

S&F aluminium handles, cast type anodized of size 150 mm, ISI marked, complete all as specified and directed.

S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor with overall length of cover plate 150mm complete all as specified and directed.

Supply and fixing Aluminium door seal with PVC brush fixed with steel screw at bottom rail door shutter complete all as specified and directed.

S&F powder coated aluminum anodized (thickness of powder not less than 50 micron) frame for doors, windows, ventilator with one or more rebates including jointing cleat for fixing etc size & thickness of section as approved by the GE complete all as specified and directed.

S&F Powder coated aluminium shutter for windows/ ventilators (sliding or openable) using standard sections as required with wall thickness not less than 2mm of approved make, with and including joining cleats for fixing, locking arrangement, rollers, rubber beading, screws, handle, hinges, tower bolts etc complete all as specified and directed. Note :- (a) Glazing and wire mesh shall be measured and paid separately for supply only as the labour element included in this item. (b) The rate quoted shall be inclusive of the cost of neoprene beading, glazing clips, screws and powder coated fittings such as hinges, tower bolts etc complete all as specified and directed. (c) The rate shall also be inclusive of complete packing with silicon gel around contacting surfaces of aluminium work and including matching the existing surface area.

Supply only sheet glass of 5.5 mm thick sheet glass ordinary quality area exc 0.5 sqm in square complete all as specified and directed.

S&F Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and directed.

Cutting holes in brick walls in cement mortor for inserting holdfast and making good dismantled portion portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed.

S&F 25mm dia drapery (Curtain) rods (powder coated finished) with fancy type brackets and fixing ,stops, rollers etc incl taking down old rods/pelmet box complete all as specified and directed.

Supply and fixing in repair plate rack of stainless steel (n.less than 0.63mm thick sheet) of size 900mmx 750mm x 250mm with steel shelves and hanging arrangements for utensil complete all as specified and directed.

Supply and fixing plate rack of stainless steel (not less than 0.63mm thick sheet) of size 600mmx 600mm x 250 mm with steel shelves and hanging arrangements for utensil complete all as specified and directed.

S&F in repair kitchen sinks made of stainless steel with drainage board 1mm thick kitchen with lugs, and washers, including bedding in CM to dwarf wall or incl fixing cantilever brackets and connecting union to pipe over all size 1115mmX460 bowl Size 510mmX370mmx203mm complete all as specified and directed.

All as per item No 72 here in before but of size 915mmX460mm and bowl size 405mmX354mmX203mm.

Supply and fixing brass wardrobe peg hooks (single) 50 to 60mm size and fixed with brass screws complete all as specified and directed as in repairs.

Supply and fixing aluminium peg set of six hooks of best quality and fixed with brass screws complete all as spd and directed as in repairs.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.

M&L factory made solid PVC board 16-18 mm thick as in cup board shelf/ door, sag free thermal and electrically insulated, light weight wrap free, impact resistant, fire resistant, termite resistant, chemically resistant and smell free complete all as specified and directed.

M&L factory made solid PVC board 18-19 mm thick as in kitchen cabinet,sag free thermal and electrically insulated, light weight wrap free, impact resistant, fire resistant, termite resistant, chemically resistant and smell free complete all as specified and directed.

M&L for 40mm dia cupboard brass knob fixed with nut screw and washer fixed in any position, complete all as specified and directed.

S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised width of flap 30mm (when open) complete all as specified and directed.

S&F 100mm long Hasp and staple, safety type, aluminium anodized with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

Supply and fixing magnetic catcher cum silencer CP and fixed with standard steel screws, complete all as specified and directed.

S&F in repair Cast iron soil, waste and vent pipes, cast sand type, ISI marked, 75 mm bore, in any length with or without ears, with cement joints, laid in trenches or in floors, complete all as specified and directed.

S&F in repair Cast iron bends (any radius), diminishing pieces or tapers (largrer bore measured), suitable for 75 mm bore sand cast pipes, ISI marked, including lead joints in lieu of cement complete all as specified.

S&F cast iron soil, waste and vent pipes, cast sand type, ISI marked, 100 mm bore, in any length with or without ears, with cement joints, laid in trenches or in floors, complete all as specified as in repairs.

S&F cast iron bends (any radius), diminishing pieces or tapers (largrer bore measured), suitable for 100 mm bore sand cast pipes, ISI marked, including lead joints in lieu of cement joints complete all as specified as in repairs.

S&F in repair vitreous china, wash down water closet pan (pedestal pattern with P or S trap) white (excluding fixing bolts, flushing cistern and flush pipe complete all as specified and directed.

S&F 100mm dia bore of pipe CI 'P' or strap complete all as specified and directed.

Supply and fixing towel rail 600mm long of PTMT fixed with and including chromium plated brass screws and wooden / plastic cleats (minimum weight 190gms), complete all as specified and directed.

Supply and fixing grating doom 100mm PTMT fixed to floor trap with cement mortar 1:3 fixed as in repair complete all as specified and directed.

S&F in repair of vitreous china, squatting pan, Orissa pattern of size 580 x 440mm, white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and flush pipe complete including provn of lime concrete complete all as specified and directed.

S&F in repair PVC valveless, syphonic action type flushing cistern, low level, white 10 ltrs capacity with inlet ball valve, valve, float and handle including bracktes complete all as specified and directed.

S&F only Vitreous China wash basin, white, flat back, size 550x450mm with and including brackets, CP waste coupling, PVC connection 450mm long and PVC waste pipe complete all as specified and directed.

M&L for 100mm bore cast iron sanitary connection socket to fit WC outlet complete all as specified as in repairs.

M&L for 100 mm bore cast iron sanitary connections short connections pipe of length upto 300 mm as in repair complete all as specified and directed.

M&L for 100 dia bore of pipe CI bends or elbows, square, or obtuse as in repairs including lead joints in lieu of cement joints complete all as specified and directed.

BLANK

S&F in repair toilet paper holder fixed with brass screws chromium plated complete all as specified and directed.

S&F CP grating 100mm bore and fixed with white cement complete as in repairs.

S&F PVC connections, 15mm bore, 45cm long with brass check nut etc complete as in repairs.

S&F PVC waste pipe 32mm bore as in repairs complete all as specified and directed.

S&F CP waste coupling 32mm bore for WHB with long screwed shanks and fly nuts complete as in repairs.

S&F in repair brass chromium plated shower rose, 125mm size with long swivel flush CP arm complete all as specified as in repairs.

S&F wash hand basin central hole mixer without pop up waste system, chromium plated, 15mm bore, fancy type complete all as specified fixed as in repairs. Make : Ess Ess Cat Part No T-118 or of equivelant make mentioned in Appx 'B'.

S&F hand jet chromium plated (health faucet with 01 m PVC pipe) for 15mm bore with fittings, fixed as in repairs complete all as specified and directed.

S&F in repair three-in-one wall mixer with telephonic shower system including tele shower , 15mm bore chromium plated fancy type complete all as specified. Make :- Ess Ess Cat Part No C215 or of equivelant make mentioned in Appx 'B'.

S&F in repairs angular stop cock, fancy type 15mm bore, chromium plated complete. Make:- Ess Ess Cat Part No VG-04 or of equivelant make mentioned in Appx 'B'.

S&F in repairs concealed stop cock, fancy type 15mm bore, chromium plated complete. Make :- Ess Ess Cat Part No VG-04 or of equivelant make mentioned in Appx 'B'.

S&F in repair sink mixer with swinging spout (Wall mounted model). Make :- Ess Ess Cat Part No HR-10 or of equivelent make mentioned in Appx 'B'.

S&F in repair corner glass shelf with Chromium plated brackets of size 250x250mm complete all as specified and directed.

S&F in repair glass shelf 43x13cm with Chromium plated brackets complete all as specified and directed.

S&F in repair towel rail brass 20mm dia with bracket CP finish. Make : Ess Ess Cat Part No H-713 or of equivelent make mentioned in Appx 'B'.

S&F 20 mm bore tubes, medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors complete incl taking down unserviceable pipe complete all as specified and directed.

S&F 15 mm bore tubes, medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors complete incl taking down unserviceable pipe complete all as specified and directed.

M&L for 20 mm bore of pipe ball brass valves, high pressure with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

All as per item No 116 here-in-before but 25mm bore.

M&L for PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in filling in PVC tank staging complete all as specified and directed.

S&F for 100mm dia bore of pipe cast iron P or S traps as in repairs complete all as specified and directed.

S&F UPVC rain water pipe, 110mm bore, single socketed in any length with rubber ring joints, fixed to walls with MS clamps made out of flat iron of size 25mm x 3mm including nuts bolts etc, fixed as in repair complete all as specified and directed.

Supply and fixing UPVC bend, for 110mm bore pipe complete all as specified and directed.

Demolition of un-reinforced cement concrete exc 15cm thick on any description and in any position (in sunken portion) not other wise specially provided for and removing all demolished material/debris to 1.50Km from the site and depositing where directed complete all as specified and directed.

M&L for plain cement concrete 1:7:12 type F-2 using 40mm graded brick aggregate as in sunken floor filling and mass concrete complete all as specified and directed.

Water proofing treatment to SUNKEN PORTION and adjoining walls of kitchen, WC, Bath & Toilet, etc. : 15 mm plaster in cement mortar (1:3) after roughning and cleaning the surface mixed with WP compound as per manufacturer’s instructions shall be provided on sunken portion while the concrete is green (a) Apply cement slurry to the surface @ 0.488 kg /Sq. m of cement mixed with Acrylic based polymer modified cementious composite compound @ 0.253 kg/Sq. m and the surface will be allowed to air cure for 4 hours. (b) Apply another layer of cement slurry @ 0.242 kg/Sq. m of cement mixed with Acrylic based polymer modified cementious composite compound @ 0.126 Kg/Sq. m and the surface will be allowed to air cure for 4 hours. (c) Curing the sunken portion with water minimum for 48 Hrs by ponding. (d) Paste one layer of 3mm thick APP membranne with bitumen by torch application to the treated sunken surface. (e) Joints/Traps/WC/soil pipes shall be properly sealed with approved sealing compound of make mentioned as specified.

Supply and fixing stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both and for iron pipe or for union, suitable for 20mm bore pipe, complete all as specified and directed.

All as per item No 126 here-in-before but 15mm bore.

Supply and fixing bib taps brass, fancy type, Short body with wall flange, standard chromium plated, cast copper alloy with crutch or butterfly handle, screwed doen for iron pipe or for brass ferruie, suitable for 15mm bore pipe, fixed as in repairs complete all as specified and directed.

Supply and fixing bib taps brass, fancy type, long body with wall flange, chromium plated ,cast copper alloy with crutch or butterfly handle , screwed down for iron pipeor for brass ferrule, suitable for 15mm bore pipe, fixed s in repairs complete all as specified and directed.

Supply and fixing angular stop cock, fancy type, cast copper alloy chromium plated, screwed down, screwed both and for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repairs complete all as specified and directed.

Supply and fixing stop valve (concealed type), chromium plated, fancy type, screwed down ,high pressure with crutch or butterfly handle, screwed both and for iron pipe or for union, suitable for 15mm bore pipe , fixed as in repairs complete all as specified and directed.

Supply and fixing chromium plated , fancy type shower rose with swivel joints 125mm dia with arm and fixing to steel pipe 15mm bore, fixed as in repair complete all as specified and directed

M&L pre polished machine cut kota stone slab as in flooring, tread and landing etc, 16-18mm thick over cement screed base laid and jointed with gray cement slurry mixed with pigment to match the shade of slab including rubbing and polishing upto Granite finish complete over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

All as per item No 133 here-in-before but as in skirting/dado or risers complete all as specified.

M&L 50 mm thick PCC 1:3:6 type C1 (20 mm graded stone aggs) as in plinth protection including finished surfaces even and smooth without using extra cement complete all as specified and directed.

S&F in repair Hoisted and fixed in position, 500 litre capacity, polyethylene water storage tanks of any shape,ISI marked double layered including making necessary connections complete all as specified and directed.

Excavation in trenches, n. exc. 1.5 m wide and n. exc 1.5 m in depth ,for foundation, laying of pipes, cables etc. or for shafts , wells, cesspits, manholes, pier holes, etc. n.exc. 10 Sqm on plan and n. exc. 1.5 m in depth and getting out in hard/dense soil complete all as specified and directed.

Returning, filling in, including spreading, watering and well ramming in layers n.exc. 25 cm in hard/dense soil complete all as specified and directed.

BLANK

M&L cement concrete in foundation, filling and mass concrete type D-2, 1:4:8 (using 40mm graded stone aggregates) complete all as specified and directed.

Dismantling of existing brick tiles or terracing tiles single layer on roof grouted in cement mortar all as specified & directed.

Demolition of mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) and removal of debries outside MoD land at place designated by local administration.

Cutting out cracks to V section to 25 mm depth in existing roofs or terracing, cleaning out, wetting,and painted with shalitex primer and filled with sealing compound , tarplastic of STP or equivalent.

M&L for RMC (low density thermal insulative concrete of density 1200 Kg/cum) 1:2:4 type B1 using 20mm graded stone aggregate obtained from MES approved plant as in roof padding etc complete all as specified and directed.

Rendering 15 mm thick (Average thickness) on roof surface including flashings and junction of parapets etc., finished even and fair in cement mortar (1:4), using water proofing compound as per recommended ratio, after brushing cement slurry complete all as specified and directed.

Five layered reinforced with non-woven polyester matt, Atactic polypropylene polymer (APP) memberane 3 mm thick having weight not less than 3.6 kg/sq. m, laid on roofs using Butane torch, and sealing all joints after & including applying bitumenous primer 0.40 Ltr/sqm with and incl applying two coats of bituminous resistant aluminium paint over APP sheet complete all as specified and directed.

Supply only integral water proofing compound.

M&L for Wire brushing and cleaning top surface , terracing or cement concrete, including flashings and junction of parapets, etc., and adjoining vertical surfaces including applying bituminous primer @ 0.40 ltrs per square meter and M&L for APP based polymeric membrane minimum weighing 3.60 kg/sqm and minimum 3 mm thick reinforced with polyester non woven fabric (weight not less than 150 gms/sqm) laid on primed surface by torch application complete all as specified including dismantling existing felt complete all as directed.

M&L cement concrete tiles 250x250x22mm thick, machine pressed, set jointed and pointed in neat cement slurry in floors, over and including 15mm screed in CM 1:4 complete all as specified and directed.

M&L for racking out to brick walls and flush pointing in cement and mortar (1:3) complete all as specified & directed.

M&L taking down, chipping and removing the loose, spoilt, damaged cement concrete, cement mortar surfaces of RCC columns, beams, walls, chajjas etc and exposing the reinforced cement, wire brushing and claening the exposed steel reinforced bar, apply rust remover over the cleaned re-barsurface wash the re-bar with clean water for removing all rusts fromthe old re-barsurfaces, fixing new reonforcement for strengthen the members as required, applying two coats ofepoxy zinc primer on new and old steel surfaces, saturate the substrate with water applying one coat of polymer modified cement and coarse sand mortar in CM 1:3 min, 40mm average thick in two coats, with and including polymer @10% by weight of cement, including erecting and dismantling steel scafoldingfor carrying out the work upto height of 10m (Appx) complete all as specified and as directed. Note:- (Polymer, new reinforcement and MS section will be measured and paid separately). Make;- Dr fixit/ Sunanda/chemestik/fosrock. or approved make mentioned Appx'B'

BLANK

Demolition of cement concrete (unreinforced ) in ground floor and paving n exc 15 cm thickness (below or above ground level) and removal of debries out side MoD land at placs designated by local administrative.

Machine pressed precast conctete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed..

Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

S&F machine made precast cement concrete curb stone blocks using Cement concrete 1:3:6 type C2 (20mm stone agg) all as directed by Engr-in-Charge.

M&L precast factory made hydroulicaly machine pressed coloured Chequered cement concrete tiles 30cm x 30cm x22- 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment including and over 15mm screed in CM 1:6 complete all as specified.

Removing excavated spoil to a distance not exceeding 250 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete, all as specified.

M&L Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed fixed as in repairs.

S&F roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc as in repairs conforming to Fe-410W-E-250 quality-A.

M&L Cast iron floor trap, with grating 100mm dia of out let including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) including connecting to pipes with lead joints fixed as in repair complete all as specified and as directed.

S&F35 mm thick second class hard wood half panneled & Half glazed and skelton shutters (divided into sub panels with provn of one vertical rail in full height) open rebated prepared to received gauge glass etc, edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass complete.

Supply and fixing wall mixer, 15 mm bore chromium plated complete all as specified and directed.

Providing, cement concrete in roof kerbs of mud stops, rounded or chamfered on edges using type B-1, 1:2:4 (using 20 mm graded stone aggregate)

BLANK

Taking down aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, sockets, etc. removing materials to store for keeping in safe custody or for taking credit (credit for items should be made as per conditions seperately) and making good disturbed surfaces of walls, floors etc and removing materials from the site complete all as directed.

M&L for Point wiring with multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable single core1.5 Sqmm for earth continuity conductor to common earth and connected to earth dolly including piano flush sunken boxes with plates complete all as directed, comprising the following:- (a) One light /bell/buzzer point controlled by one switch or one fan point controlled by one switch & fan regulator with 1.5 Sqmm ( nominal area) cable & 1.5 Sqmm ( nominal area) FRLSH cable as earth continuity conductor, in and including rigid non metallic PVC heavy duty concealed/surface conduit complete as directed.

M&L for Point wiring with multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable single core1.5 Sqmm for earth continuity conductor to common earth and connected to earth dolly including piano flush sunken boxes with plates complete all as directed, comprising One light /bell/buzzer point controlled by two way switch with 1.5 Sqmm ( nominal area) cable & 1.5 Sqmm ( nominal area) FRLSH cable as earth continuity conductor, in and including rigid non metallic PVC heavy duty Concealed/surface conduit complete as directed.

All as per item No 166 here-in-before but for one socket outlet 3pin, 5 Amps on the same board.

All as per item No 166 here-in-before but for one socket outlet 3pin, 5 Amps on the independent board.

All as per item No 166 here-in-before but for one socket outlet 3 pin 15 Amps on independent board using cable of size 2.5 Sqmm for phase & neutral and 1.5 Sqmm as earth wire. Note :- The wiring on RCC surfaces such on ceiling/columns/beams etc shall be provided on surface by using PVC casing/caping as approved by GE.

S&F switch piano flush type 6 Amp one way single phase confirming to IS-3854-1997 complete all as specified and directed.

S&F switch piano flush type 6 Amp two way single phase confirming to IS-3854-1997 complete all as specified and directed.

S&F switch piano flush type 16/20 Amp one way single phase confirming to IS-3854-1997 complete all as specified and directed.

S&F socket shuttered outlet 5 pin 6 Amp piano flush type multi purpose combined ( ISI marked) complete all as specified and directed.

S&F socket shuttered outlet 5 pin 6/16 Amp piano flush type multi purpose combined ( ISI marked) complete all as specified and directed.

S&F electric bell, AC 230 volt single pole Ding Dong type complete all as specified and directed.

S&F bell push, AC 230 volt piano type one way complete all as specified and directed.

S&F stepped switch type electronic fan regulator piano flush Type.

S&F Ceiling rose 6 Amps three terminals complete all as specified and directed.

Taking down ceiling/exshaust fan care fully and refixing of same all as specified and directed.

S&F LED CRCA batten with decorative end cap complete with and incl retrofit polycarbonate/glass tube 20 watt capacity 4 feet long & white light and incl connections from ceiling rose complete all as specified and directed.

S&F LED CRCA batten with decorative end cap complete with and incl retrofit polycarbonate/glass tube 10 watt capacity 2 feet long & white light and incl connections from ceiling rose complete all as specified and directed.

S&F LED lamp holder including lamp 9watt B-22 pin type complete all as directed.

S&F Bulk head fitting in engineering plastic housing with clear prismatic diffuser 6 watt capacity complete all as specified and directed.

Disconnecting the power supply and taking down old unserviceable DBs/junction box/panels etc of any type and size complete along with all MCCBs/MCBs etc all as directed.

S&F for MCB distribution board having IP-43 protection, powder coated, double door flush mounted complete with locking arrangement suitable for 4 way VTPN 415V AC supply to accommodate MCCB complete all as specified and as directed.

S&F for MCCB 415 volts Triple pole and neutral with fixed thrrmal magnetic setting breaking capacity 16 KA conformingto IS : 13947-2 of 125 Amps complete with proper thimble all as specified and directed. Note for item No 186 & 187 :- The make of MCB DB VTPN 4 way & MCCB should be of same make for proper fixing arrangement.

Supply and fix MCB DB, with provision for incoming 2 pole (MCB / Isolator ) and single phase outgoing, suitable for surface and flush mounting, IP 43 protection, double door of metal 8 way all as specified and directed.

S&F MCB SP 63 Amps 240 Volts having braking capacity 16 KA "C" characterstic all as specified & Directed.

S&F MCB DB, with provision for incoming 2 pole (MCB / Isolator ) and single phase outgoing, suitable for surface and flush mounting, IP 43 protection, double door of metal 12 way all as specified and directed.

S&F MCB SPN 40 Amps 240 Volts having braking capacity 10 KA "C" characterstic all as specified & directed.

S&F MCB SP 6 to 32 Amps 240 Volts having braking capacity 10 KA "C" characterstic all as specified & directed.

Taking down carefully copper/aluminium sub main wiring complete, including existing batten/conduit etc. and making good disturbed surfaces of wall, floors, etc. complete all as specified and directed.

Sub main wiring (with approved colour coding as per IS) with two single core 10 sqmm FRLSH PVC insulated multistranded copper conductor cable 1.1 KV grade (two runs of main cable for phase and neutral) alongwith additional one run of single core 10 sqmm FRLSH PVC insulated flexible stranded copper conductor 1.1 KV grade of earth for earthing with and including concealed pvc conduit and cutting chases and making good the and matching with existing surface.complete all as specified and as directed. Note:- 2 runs of 10 sqmm cable and 1 run of 10 sqmm earth cable shall be measmed as one unit.

Sub main wiring (with approved colour coding as per IS) with two single core 6 sqmm FRLSH PVC insulated multistranded copper conductor cable 1.1 KV grade (two runs of main cable for phase and neutral) alongwith additional one run of single core 6 sqmm FRLSH PVC insulated flexible stranded copper donductor 1.1 KV grade of earth for earthing.including concealed pvc conduit and cutting chases and making good the and matching with existing surface. Note:- 2 runs of 6 sqmm cable and 1 run of 6 sqmm earth cable shall be measmed as one unit.

M&L for earthing complete with galvanized steel earth plate electrode size 600x600x6.0mm thick buried directly in ground vertically in a pit of depth not less than 2.25 mtr below ground levels with top edge of the earth plate not less than 1.5 mtr below normal ground level surrounded from all sides by mixture of charcoal and common salt and electrode connected to and including galvanized earth lead 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanized including GI protection pipe light grade 15mm bore connected to main earth wire on pole light grade 15mm bore connected to main earth wire on poleor control board or main switch and GI pipe medium grade 20mm bore for watering funnel with wire mesh. CI cover with frame, PCC chamber pit with PCC 1:2:4 type B-1 20 mm graded stone aggregate excavation and earth work all as shown in electrical plate No 3 of MES Schedule part I of 2009 connected to earthing test point indicaed including testing on completion all specified & as directed. Note:The unit rate includes for protection pipe and GI earth wire 4.00 mm dia from top to earth plate up to 7.5 meter.

S&F sheet metal enclosurefor suitable for fixing of energy meter 04 Nos of size of 3' X 2'x1' with locking arrangement including taking down carefully energy meter single/triple phase complete all as specified & directed.

Supply and fix Water heater storage type, electric 2 KW, capacity 25 litres 5 star rated complete all as specified and directed.

Supply and fixing exhaust fan metal body heavy duty AC single phase 230/240 Volt of size 300 mm sweep with lover complete all as specified and directed.

M&L Cutting opening in the existing brick wall in round shape suitable for 300 mm dia exhaust fan including finishing and matching the distrubed surface with original complete all as specified and directed.

Cutting of Existing water supply main any size upto 25 mm for Taking branch connection for taking branch connection of size 15 mm including insertion of Tee equal/unegual all as required at site or directed.

Supplying, laying, testing and commissioning of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 50 sqmm 3.5 core.

Excavation in trenches in hard/dense soil n. exc. 1.5m wide and n. exc. 1.5m in depth for laying of cables, poles, stay etc. and getting out complete all as specified and as directed.

Returning filling in including spreading, watering and well ramming in layers n.exc. 25 cm thick after the cable are laid and testsd complete all as specified and as directed.

Removal of surplus soil to a distance n. exc. 50m and depositing where directed at a level n.exc. 1.5m above the starting point complete all as specified and as directed.

Supply and laying 50 mm outer dia , double walled corrugated (DWC) HDPE duct pipe conforming to IS 14930 Pt II with Anti Rodent and non flame propogating properties of approved color with fittings for cable protection from approval make complete all as specified and as directed. Make : Finolex/Duraline or equivalent make mentioned in Appx B”

Supplying, fixing and testing Tamper proof electronic energy meter (KWH) three phase 415 Volts, 10-40 Amps, 50 Hz, LCD display with class 1.0 accuracy as per IS - 13779 frequency range : 50 Hz +(-) 5% including taking down old electric meter from meter box and deposited to MES store yard all as directed. Note : - All the connection will be done through proper size of copper thimble.

S&F rigid, non-matalic, PVC conduit pipe, ISI marked, 20 to 25mm including saddles complete all as specified and as directed. Make: Finolex/Prince/Supreme.

Cutting, chases in burnt brick walls built in cement mortar, for concealed conduit wiring, girth not exc 10cm and making good in cement mortar 1:3 and matching the surface with the existing surface complete all as specified and as directed.

S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps.

M&L for inverter wiring with multi stranded copper conductor ( run through in concealed conduit and connecting in existing points for light/fan/exhaust fans switches/sockets etc and testing complete as satisfaction of Engr in Charge)PVC insulated and unsheathed FRLSH cable single core1.5 Sqmm copper conductor.

Taking down carefully by unscrewing from boards/ outlet boxes, fittings and fixtures such as switches,sockets, ceiling roses, lamp holders, brackets, ceilingfittings, bulk head fittings, tube light fittings and regulators, etc. for refixing the same at same site as directed by Engr-in-Charge and making good disturbed suraces.

S&F PVC connection pipe 15mm size hpt and cold with PTMT nuts of length 450mm.

aggarwal traders

MICKY CONSTRUCTION PVT LTD

SACKSON ENTERPRISES

B B BUILDERS

shree balaji builders

AMRIT SINGH

Kartik Builders