Supply of various chemicals for 1x660 MW PTEP Panki, Kanpur.

Ferric Chloride 43 % Physical state: Liquid Technical specifications are as follows: - Colour: amber Odor: None Flammability (solid, gas): Non flammable Specific gravity / density: 1.4 g/ml Solubility: Soluble in water kinematic Viscosity: 6.8 cSt

Poly Electrolyte (100%) Zetag 4120/JAL FLOC 1012(AN)(25 bag each) Technical specifications are as follows: - Polyacrylamide (Anionic) Product type: Powder Physical form: Off-white granular solid Anionic charge: Medium-low Molecular weight: Very high Specific gravity: 0.75 Bulk density: 46.8 lb/ft3 pH 1% solution: 6-8 Apparent Viscosity/(cP) @ 25 °C Concentration 0.25% 0.50% 1.0%

Ammonia Solution (25% min. as NH3, Sp. Gravity 0.91) ( as per IS 799/1990) AR Grade

Hydrated Lime AS per IS:1540-1990( part-II) with latest amendment if any. Technical specifications are as follows: - Available Lime as Ca(OH)2: 80-85% by mass Acid Insoluble(as Sio2): 1.0-.2.0% by mass Iron(as Fe2 03): 0.20%% (max. by mass) Moisture: 1.0-.2.0% by mass Alumina (as Al2O3): 0.10% (max. by mass) Magnesia (as MgO): 1.5%(max. by mass) Dead Burnt Lime (as CaO) 3.5% (max. by mass) PHYSICAL PROPERTIES a. Colour White b. Particle Size: 200Mesh c. Physical State: Free Flowing Fine Powder The material shall be substantially free from ASH, MUD, Core.

Hydrazine Hydrate (80% concentration (As per IS 12086/1991)

Hydrochloric acid (HCI) 33% Concentration (Technical Grade), Specific Gravity at 27°C: Min 1.145, max 1.153 Confirming to IS: 265/1995 (with latest amendment, if any) Technical specifications are as follows: - i. Colour light yellow ii. hydrogen Chloride: 33% by w/w HCL min iii. Iron: 10 mg/Kg as Fe max, iv. Oxidizing substance: 50mg/Kg as Cl2 max v. Reducing Substance: 50mg/Kg as SO2 Max vi. Residue on Evaporation: 100mg/Kg Max, vii. Sodium: 20mg/Kg as Na maximum viii. Free Chlorine & Bromine: 5 ppm as HCL max Note. (i) Conc. of technical Grade HCL less than 30% will not be acceptable.

Sulfuric Acid H2SO4 Sulfuric Acid concentration 98% As per IS 266

Sodium Hypo Chloride (NaOCL) (10%) Technical specifications are as follows: - Appearance: Yellow to light green liquid. Odor: Bleach like odor. Solubility: Infinitely soluble in water. Specific Gravity: 1.15 – 1.16 Boiling Point: 180 OF decomposes slightly Vapor Pressure: 17.5 @ 68 F Evaporation Rate: < 1 (butyl acetate = 1) pH: 11 to 14

navnidhi trade linc (BID ID -4971418)

Howrah Chemical Works (BID ID -4973699)

jalvid udyog (BID ID -4973652)

P. D. Scientific Industries (BID ID -4970613)

Chembond Water Technologies Limited (BID ID -4970717)

SHREE RAJNIDHI ADARSH ENTERPRISES PVT LTD

jalvid udyog

Howrah Chemical Works