SPECIAL REPAIR TO BLDG NO. P-27 OR MD ACCN AT JADUNATH ENCLAVE UNDER GE (NORTH) UDHAMPUR

Amount

Taking down chowkats or frames with shutters (without taking off shutters from the frames), area not exceeding 1.50 Sqm each and making good disturbed surface to match with existing surface, complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames), area exceeding 1.50 Sqm but not exceeding 4.0 Sqm each and making good disturbed surface to match with existing surface, complete all as specified and directed.

S&F solid PVC door frame of size 50x47mm, made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying & fixing in opening as per specifications & drawing, complete all as specified and directed.

S&F factory made solid panel PVC door shutter, 30mm thick (style) consisting of frame, made out of MS tube for top and bottom rails, MS frames shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site, complete all as specified and directed.

S&F pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. (thickness of sheet shall be 1.25mm) and make the wall good with plaster in CM 1:6, complete all as specified and directed.

S&F pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. (thickness of sheet shall be 1.25mm) and make the wall good with plaster in CM 1:6, complete all as specified and directed.

M&L for mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc. complete, drilled for fixing of steel sheeting or other covering, doors etc., to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides and hanging and also fastening & fixing complete, angle as in cup boards (size 40x40x5mm), conforming to FE-410-W Gde-E-250 quality-A, complete all as specified and directed.

M&L for PCC 1:3:6, type C-1 (using 20 mm graded crushed stone aggregates) as in filling in back of pressed steel door frame/ chowkhat and fixing of bed block of hold fast etc, complete all as specified and directed.

S&F 35mm thick factory made, 2nd class hard wood rail and style plain framed, panelled shutters (two Nos panels) with lock rail and panel of 9mm thick BWP commercial ply or 12mm thick veneered partical board with commercial veneering on both sides. The size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, complete all as specified and directed.

All as per Srl item No. 9.00 above but glazed and skeleton shutter with sash bar for glass / wire gauge, complete all as specified and directed.

M&L for 18/19mm thick prelaminated particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, complete all as specified and directed.

S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed etc. complete all as specified and directed.

S&F 150mm size helical double action door spring, mild steel with steel wire spring, stove enameled, black, complete all as specified and directed.

S&F 75mm size butt hinges, medium weight, cold rolled, mild steel, complete all as specified and directed.

S&F 300mm long aluminum alloy, anodised, sliding bolt with hasp staple (bolt type) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminum alloy and fixed, complete all as specified and directed.

S&F 250mm long aluminum alloy, anodised, sliding bolt with hasp staple (bolt type) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminum alloy and fixed, complete all as specified and directed.

S&F aluminium anodised barrel tower bolts, 200mm long of extruded section, complete all as specified and directed.

S&F aluminium anodised barrel tower bolts, 150mm long of extruded section, complete all as specified and directed.

S&F alunminium handle, cast type, 100mm long, oval type, complete all as specified and directed.

S&F alunminium handle, cast type, 150mm long, oval type, complete all as specified and directed.

S&F 100mm size aluminium anodised hasp and staple, safety tape including bolts to hinge plate and fixed with screws, complete all as specified and directed.

S&F aluminium anodised handles, cast type, 125mm long, complete all as specified and directed.

S&F aluminium anodised barrel tower bolts, 125mm long of extruded section, complete all as specified and directed.

S&F continuous piano hinges, 30mm width of flap, mild steel, bright finish or electrogalvanised, complete all as specified and directed.

S&F 150mm size floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, complete all as specified and directed.

S&F powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleats for fixing etc. complete all as specified and directed.

S&F powder coated (of approved colour) aluminium (minimum thickness of powder coated 50 micron) as in shutter of windows, ventilators openable/ louvers fixed/ sliding type without sash bars, aluminium section not less than 0.55 Kg/m including necessery jointing cleats, glazing clips, rubber, neoprene packing, aluminium snap beding, screws, rolling for smooth moving and locking arrangement etc. fixed to wall including preparation of disturbed portion both sides (internal & external surfaces of wall) to match with existing surface treatment and all sides of aluminium frame shall be sealed with silicon sealent (inner/outer face), complete all as specified and directed.

M&L for mild steel framed work such as grills, gratings etc. with ends of bars, shouldered and/ or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings, staging for water tanks and similar work, conforming to Fe-290, Gde-E-165, complete all as specified and directed.

S&F 4.0mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane, complete all as specified and directed.

S&F 4.0mm thick pin head type, figured glass and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane, complete all as specified and directed.

Cutting holes in brick walls built in cement mortar for inserting holdfasts and making good dismantled/ disturbed portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required, exc half brick but not exc one brick thick wall, complete all as specified and directed.

M&L for preparation of new steel or iron surfaces of any description, exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

M&L for preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, not otherwise described, and treated with tar or coal tar black paint, complete all as specified and directed.

M&L for water proofing treatment to sunken portion of WC, bathroom etc. by applying first layer of slurry of cement @ 0.488 Kg/Sqm mixed with acrylic based polymer modified cementitious composite compound @ 0.253 Kg/Sqm this layer allowed to air cure for 4 hours then applying slurry of cement @ 0.242 Kg/Sqm mixed with acrylic based polymer modified cementitious composite compound @0.126 Kg/Sqm and allowed to aircure for 4 hours and joints seal with sealing compound as approved by GE, complete all as specified and directed. Note :- Before laying of lime concrete joints of trap/ WC/ soil pipes shall be properly sealed with sealing compound of Roofex/ Forre/ FOSROC and provn of 'P' or 'S' trap/ Nahani / floor traps with long arm.

Demolition of concrete of any description and in any position, not otherwise specifically provided for sunken floor, complete all as specified and directed.

Demolition of cement concrete (un-reinforced) as in roofs of existing water proofing treatment of any type and any thickness, complete all as specified and directed.

M&L for 25mm thick plain cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregates) as in floors, leveling course, finished the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for 7-8mm thick non skid coloured ceramic tiles, area of each tile exc. 0.11 Sqm but not exc 0.18 Sqm, laid in floor over and including 15mm thick screed bed or bedding layer in CM 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, complete all as specified and directed.

Dismantling floor, hearth or wall tiles including cement mortar bedding (but not backing), terrazo dado/wall tiling and skirting. Etc on brick or stone walls etc including racking out joints hacking for key and scrubbing removing serviceabletiles to storeand rubbish off the premises etc. complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 450mm x 300mm x 6-7mm thick as on verticle surfaces, fixed on wall or verticle surfaces over and including 10mm thick plaster/ backing coat in CM 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, complete all as specified and directed.

M&L for 20mm thick granite work (single piece) of any type, protruding chamfered/ rounded edges in treads, table rubbed and polished as in steps, jambs, pillars, window cills, cooking platforms and the like, laid over and including 20mm thick screed bed in CM 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed.

M&L for machine cut kota stone slab flooring, 20-25mm thick as in flooring, steps etc. laid over and including 20mm thick screed bed or bedding ayer in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed.

M&L for machine cut kota stone slab flooring, 20-25mm thick as in skirting or verticle surfaces etc, fixed over and including 10mm thick rendering as backing coat in CM 1:3 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed.

S & F PVC connection 15 mm size with PTMT nuts of length 600 mm of approved quality, complete all as specified and directed.

S&F in replacement 15mm bore stop valve, fancy type, chromium plated, cast copper alloy, screwed down, high pressure with crutch butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed.

S&F in replacement brass chromium plated shower rose of 125mm size with arm and with or without swivel joints to steel pipe or union, complete all as specified and directed.

S&F in replacement 15mm bore stop valve (concealed type), fancy type, chromium plated with long shank and cup, complete all as specified and directed.

S&F in repair brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges, complete all as specified and directed.

S&F stainless steel soap dish of size 160mm x 160mm x 90mm, fixed to plugs on wall with chromium plated brass screws, complete all as specified and directed.

S&F in repair 15 mm dia bore fancy type chromium plated bib taps cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe, or for brass ferrule, complete all as specified and directed.

S&F brass CP mixer 15 mm bore for mixing hot & cold water, screwed down for iron pipe for wash hand basin with wall flange, complete all as specified and directed.

S&F sink mixture with regular swinging spout, wall mounted type with connecting legs and wall flanges, complete all as specified and directed.

S&F stainless steel plate racks of size 750mm x 900 x 250mm and thickness of SS strip of 1mm fixed on wall etc. complete all as specified and directed. .

S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm incl 32mm waste fittings brass chromium plated etc. complete all as specified and directed.

S&F mirror cabinet of PTMT of size 450mm x 600mm with magnetic looking arrangements, fixed with and including chromium plated brass screws and PVC rawl plugs, complete all as specified and directed.

S&F 25mm dia stainless steel curtain rod with brackets and knobs at both ends as per site requirement including taking down old existing curtain rods of ay type with accessories, complete all as specified and directed. Note :- The cost of brackets and knobs shall be deemed to include in the quoted rates.

Taking up or down GI tubing 15mm bore including cleaning for re-fixing or removal to store, complete all as specified and directed.

Taking up or down GI tubing 20mm bore including cleaning for re-fixing or removal to store, complete all as specified and directed.

Taking up or down GI tubing 25mm to 32mm bore pipe including cleaning for re-fixing or removal to store, complete all as specified and directed.

S&F 15mm bore GI tubing, medium grade with all fitting and fixtures, fixed to walls or ceilings or laid in floors, complete all as specified and directed.

S&F 20mm bore GI tubing, medium grade with all fitting and fixtures, fixed to walls or ceilings or laid in floors, complete all as specified and directed.

S&F 25mm bore GI tubing, medium grade with all fitting and fixtures, fixed to walls or ceilings or laid in floors, complete all as specified and directed.

Re-fixing of old 15mm bore GI steel water tubing and connections in new or old position (walls, ceiling, floors, etc.), complete all as specified and directed.

Re-fixing of old 20mm bore steel water tubing and connections in new or old position (walls, ceiling, floors, etc.), complete all as specified and directed.

Re-fixing of old 25mm bore steel water tubing and connections in new or old position (walls, ceiling, floors, etc.), complete all as specified and directed.

S&F 32mm bore GI water tubing, medium grade, for spout, laid in sunken portion/ floors, complete all as specified and directed.

Taking down rain water pipes and eaves gutters (any size and pattern) including all fittings, heads shoes, bends, swan necks etc. including cleaning or refixing or removal to store (measured overall as fixed along the centreline over fittings and accessories), complete all as specified and directed.

S&F replacement cast iron floor trap with SS grating including jointing with solvent cement, 75mm diameter of outlet, complete all as specified and directed.

Dismantling of 100mm bore CI / RCC drain pipes including all fittings and accessories and in any position, complete all as specified and directed.

Dismantling of 75mm bore CI / RCC drain pipes including all fittings and accessories and in any position, complete all as specified and directed.

S&F 75mm bore cast iron spun pipes, double socketed in any length with cement joints, fixed to walls with MS clamps of suitable size, complete all as specified and directed.

S&F 100mm bore cast iron spun pipes, double socketed in any length with cement joints, fixed to walls with MS clamps of suitable size, complete all as specified and directed.

S&F cast iron bend, suitable for 100mm bore CI pipe, complete all as specified and directed.

S&F cast iron bend, suitable for 75mm bore CI pipe, complete all as specified and directed.

S&F 100mm dia cast iron branch pieces, Single 'T', equal or unequal ordinary or inverted (spigot or socket type) or with paraller branches, complete all as specified and directed.

S&F 100mm dia cast iron branch pieces, double 'T', equal or unequal ordinary or inverted (spigot or socket type) or with paraller branches, complete all as specified and directed.

S&F 75mm dia cast iron branch pieces, Single 'T', equal or unequal ordinary or inverted (spigot or socket type) or with paraller branches, complete all as specified and directed.

S&F 75mm dia cast iron branch pieces, double 'T', equal or unequal ordinary or inverted (spigot or socket type) or with paraller branches, complete all as specified and directed.

S&F 100mm bore cast iron vent cowl, complete all as specified and directed.

S&F 75mm bore cast iron vent cowl, complete all as specified and directed.

S&F in repairs 20mm gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed.

S & F in repairs vitreous China squatting pan of Orissa pattern of approved make of size 580 mm X 440mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe incl cement concrete bedding and connection to antisyphonage pipe etc including making good to floor, complete all as specified and directed.

S&F in replacement PVC low level flushing cistern of 10 ltrs capacity with top push button inclusive of brackets and PVC bend long type and connecting to flush pipe of any size and pattern with inlet ball valve float and handle, complete all as specified and directed.

S&F corner glass shelf (as approved by GE), complete all as specified and directed.

S&F in replacement wash hand basin of size 550mm x 400mm vitreous china white, flat back including brackets, brass chromium plated waste coupling and PVC waste pipe of 32mm dia, complete all as specified and directed.

Taking down old PCC tiles form roof and removing bedding at any position, complete all as specified and directed.

M&L for 15 mm thick cement plaster in cement mortar 1:3 on roof surfaces finished even and smooth without using extra cement, incl mixing of water proofing compound for Accessable roof/Non Accessable roof, complete all as specified and directed.

M&L for chequred cement concrete tiles of size 25cm x 25cm x 22mm thick each, set, jointed and pointed in neat cement slurry, laid in floors with grey cement and pigment, laid over and including 15mm thick screed bed or bedding layer in CM 1:4, complete all as specified and directed.

Taking down or dismantling existing roof treatment of any description and type, complete all as specified and directed.

M&L for roughing surfaces of old concrete surfaces by picking up, sweeping, cleaning and washing down with water to remove dust etc. for local depressions RCC surface and brushing neat cement slurry with 3.0 Kg of cement Per Sqm, complete all as specified and directed.

Supply only water proofing compound, complete all as specified and directed.

M & L for apply bituminous primer confiriming to IS -3384 @ 0.40 Kgs/ Sqm on prepared surface on sunny day. After the primed surface has dried and apply a coat of hot blown 85/25 penetration grade blown bitumen, confirming to IS -702@ 1.20kg/ Sqm on the surfaces. Provide APP (Atactiic Polypropylene) modified polymeric five layered membrane with central core of 100 micron high molecular high density firm. Minimum weight of membrance will be 3 kg/Sqm. APP membrance will be laid across the slope from lowest line sloping roof towards ridge with minimum end lap of 150 mm & side lap of 75mm bonded with hot blown bitumen. Over the APP membrance apply semi hot blown 85/25 penetration grade bitumen @ 1.20kg/ Sqm and blinded with fine sand in dry condition @ 0.50 kg/Sqm dusted over the bitumen coat. Note :- The laying of the membrane shall be got done by authorized applicator of the membrane manufacturer, complete all as specified and directed.

Making benching with PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) with using WPC along side wall adjoining to roof kerb in concave shape, complete all as specified and directed. Note :- WPC shall be measured and paid separately under respective item of this BOQ.

Taking down cement plaster on brick walls, stone masonry, concrete surfaces etc. including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed.

M&L for 10mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:6, finished the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for rendering 15mm thick plaster in CM 1:4, mixed with and including WPC as per manufacturer's instructions in two layer (10mm+5mm) as in patches on smooth face of brick work or concrete surfaces, finishd the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for 5mm thick rendering in CM 1:3 as on ceiling, finished the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for reinforced cement concrete 1:2:4 (Nominal Mix) type B-1 (using 20mm graded crushed stone aggregate) as in chajjas, complete all as specified and directed.

Demolition of brick work or stone boulder masonry, built in cement mortor including all quoins, arches, pillars etc., complete all as specified and directed.

M&L for half brick work with sub Class 'B' bricks, old size, straight or curved on plan, built in CM 1:4, complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, old size, straight or curved on plan exc 6 mtr mean radius, build in CM 1.6, complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-2 (using 20mm graded crushed stone aggregates) as in plinth protection, finished the surface even and smooth without using extra cement, complete all as specified and directed.

Demolition of RCC of any description such as kitchen chimney, chajja, shelves, OHT tanks etc. and in any position, not otherwise specially provided for (reinforcement cut as required to facilitate demolition), complete all as specified and directed.

M&L for RCC (Design Mix) of Grade M-25 as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in the shelves and the like, complete all as specified and directed.

S&F TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

S&F TMT Mild steel bars 6-8mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

Formwork to rough finished concrete surfaces and soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (Horizontal or sloping), complete all as specified and directed.

Formwork to rough finished edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but not exc 20cm wide, complete all as specified and directed.

Dismantling water tank and remove to store of capacity exc 250 ltrs but not exc 500 ltrs, complete all as specified and directed.

S&F 1000 ltrs capacity rotational moulded polyethylene water storage tank (cylindrical vertical with closed top), white colour, three layered, ISI Marked, hoisted and fixed in position, complete all as specified and directed.

S&F ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, screwed for 20mm bore iron pipe (Minimum weight 210 Gms), complete all as specified and directed.

M&L for preparing new plastered surfaces of walls and applying 2-3mm wall care putty and smoothening the surface with sand papers / mechanised sanding etc. and applying two coats of oil bound distemper over a coat of wall primer, complete all as specified and directed. Note :- Colour / tint of OBD shall be approved by Engineer-in-Charge.

M&L for preparation of surfaces and applying three coat of white wash on newly plastered surface of ceiling, complete all as specified and directed.

M&L for preparation of new surfaces of wall and applying two coats of cement base paint over and including a coat of alkali resistant primer, complete all as specified and directed.

S&F in replacement eye door viewer (magic eye) , fixed in door shutters at site, complete all as specified and directed.

M&L for rubber sheet 50mm wide and of thickness not less than 3mm, fixed with stainless steel screws at the bottom of the door shutters as in door cill at site, complete all as specified and directed.

S&F stainless steel fancy type peg set of four and fixed in position with SS/CP screws, complete all as specified and directed.

M&L for grinding and polishing existing kota stone flooring, complete all as specified and directed.

S&F stainless steel toilet paper holder of size 180mm x 90mm x 70mm, complete all as specified and directed.

M&L for stainless steel (Grade 304) railing, made of hollow tubes, channels, plates etc. including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size on the top of floor or the side of waist slab with suitable arrangements, complete all as specified and directed.

Taking down carefully point wiring copper/ aluminium (light, fan, socket and power) complete including fittings such as switches, ceiling roses, pendent regulators, sockets etc and removing materials to store for keeping of safe custody or credit to contractor and making good the disturbed surfaces to match with existing surfaces, complete all as specified and directed. Note :- Fittings shall be measured and paid separately under respective items of BOQ.

M&L for point wiring with PVC insulated unsheathed, FRLS 1100 volts grade stranded copper conductor cable single core 1.5 Sqmm for one light / fan point controlled by one way switch, and wire to be drawn in and including rigid pvc concealed conduit of dia not less tham 20mmof 2mm wall thickness complete with all accessories including GI anealed metal box 1.2 mm thick switch board of suitable size be fixed flush wall , with 3 mm thick ebonite sheet cover and necessary screws, cap washers etc. or to be fixed on wall respectively as directed by EIC and providing earth continuity wire using PVC insulated, un sheathed single core stranded copper conductor FRLS cable of size 1.5 Sqmm, complete all as specified and directed.

All as per Srl item No. 123.00 above but for bell / buzzer on independent board controlled by one push button bell switch, complete all as specified and directed.

All as per Srl item No. 123.00 above but for one 5 Amps socket outlet on independent board, complete all as specified and directed.

All as per Srl item No. 123 above but wire size 2x2.5 Sqmm and and providing earth continuity wire using PVC insulated, unsheathed single core stranded copper conductor FRLS cable of size 2.5 Sqmm. to controlled the 3 pin 5 / 15 Amps socket outlet on independent board, complete all as specified and directed.

All as per Srl item No. 123.00 above but for fan point on same board with other switches, complete all as specified and directed.

S&F switch piano, flush type, one way, single pole, 5 Amps, suitable for 240 Volts, 50 Hz, AC supply, complete all as specified and directed.

S&F socket outlet, 2 in 1, 3 pin, 5 Amps, flush type, complete all as specified and directed.

S&F Switch Piano, flush type, One way, single pole, 15 Amps, suitable for 240 V, 50 Hz, AC supply complete all as directed by Engineer- in - Charge.

S&F Two in one, 3 Pin, 5/15 Amps, flush type socket outlet suitable for 240 V, 50 Hz, AC supply complete all as directed by Engineer- in - Charge.

S&F Push bell switch piano, flush type, white colour, single pole, 5 Amps, suitable for 240 V, 50 Hz, AC supply complete all as directed by Engineer- in - Charge.

S&F ceiling rose, 3 terminal, PVC/ polycarbonate isolated body, complete all as specified and directed.

S&F Stepped type, electronic fan regulator, flush type on the existing phenolic laminated sheet etc. as required complete all as directed by Engineer- in - Charge.

S&F calling bell, suitable for 230 Volts, 50 Hz, single pole, AC supply, complete all as specified and directed.

S&F slim linear LED lighting fixture 18 Watt LED batten with full base of extruded aluminium section acting as a heat sink with closed back, isolated driver, complete making all connection using 1.5 Sqmm copper conductor multi-standard PVC insulated 2 Core flexible cable with flexible PVC pipe from ceiling rose to fittings, complete all as specified and directed.

S&F decorative ultra slim linear LED lighting fixture 10/12 watt LED, complete making all connection using 1.5 Sqmm copper conductor multistranded PVC insulated 2 Core flexible cable from ceiling rose to fitting by using extra length flexible cable 2 core other than provided by manufacture, complete all as per specified and directed.

S&F decorative ultra slim linear LED lighting fixture 5/6 watt LED, complete making all connection using 1.5 Sqmm copper conductor multistranded PVC insulated 2 Core flexible cable from ceiling rose to fitting by using extra length flexible cable 2 core other than provided by manufacture, complete all as per specified and directed.

S&F new generation energy saving LED bulk head 9/10 Watt with opal diffuser suitable for 600 LUMEN, complete all as specified and directed.

Taking down fan, ceiling cable end, dismantling blades and kept in safe custody for refixing on same location, complete all as specified and directed.

M&L for repair of ceiling/ exhaust fans, any sweep and size and make, obtained from Srl item No. 140.00 above and oiling, greasing after cleaning slot, over hauling and replacement of defective split pin, nuts, bolts, washer etc. including spray painting with enammeled paint with the help of spray gun and marking of MES Number with black enammeled synthetic paint, complete all as specified and directed.

Hanging or fixing only ceiling / exhaust fan of any size and type and connecting up with including provision of stranded 3 Core flexible 1 Sqmm copper conductor cable from ceiling rose or connector to fan, complete all as specified and directed.

M&L for earthing complete with GI earth plate electrode of size 600mm x 600mm x 6mm thick, buried in ground vertically to a depth not less than 2.25 meters below normal ground level with top edge of the earth plate at a depth not less than 1.5 meter below normal ground level, earth plate surrounded 15cm thick layers of common salt and charcoal dust starting from ground below 15cm of earth plate and upto 15cm above the same. GI plate connected with galvanised earth lead wire 4.0mm dia by means of GI nuts, bolts and washers of galvanised iron or steel all as shown in electrical plate no.5 connecting to earth test point all as specified or indicated including testing on complition with following :- (a) Test point GI wire 4mm dia. (b) Watering pipe GI light grade 20mm dia from top of the earth electrode up to MS funnel with wire mesh embeded in floor of PCC earth pit. (GI Funnel should properly tighted on GI watering pipe and embeded in PCC floor of earth pit with open top suitable for watering of earth pits). (c) PCC earth pit 30x30x30cm constructed in PCC 1:2:4 type B1 exposed surfaces smoothly finished with 15mm thick cement mortar 1:6 plaster including RCC pit cover 25mm thick with 2 Nos MS handles of 12mm dia suitable for carrying of pit cover. (d) Angle iron frame made of 40x40x4 mm angle iron for 30x30 mm PCC pit for holding the pit cover.

S&F earth continuity conductor or main earthing lead, fixed to wall on batten or recess or chases or buried in ground or drawn in conduit pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 6mm dia galvanised iron or steel wire, complete all as specified and directed

S&F sheet metal VTPN DBs - 160 Amp, double door, 4 Way (optimum F2+12) with metal door, 415 volts grade, IP-43 Protection Grade, fixed flush to wall complete including connections should be provide with necessary reducer lugs, complete all as specified and directed.

S&F MCCB adjustable type, 160 Amps with breaking capacity 36 KA, 4 pole, 415 Volt, complete all as specified and directed.

S&F in replacement single pole and neutral sheet steel powder coated distribution board for MCBs fitted with bus bar, neutral link, earth bar and din rail, suitable for use on 240 Volts, 50 Hz supply double door SPN DB system 8 ways, complete all as specified and directed.

S&F 'C' series SPN MCB 40 to 63 Amp Amps 240V ,50Hz,10kA lighting and other domestic loads incl all termnials, fitting etc, complete all as specified and directed.

S&F connection and testing MCB SP 6-32 Amps 'B' Curve, complete all as specified and directed.

Taking down serviceable/ unserviceable electric meter including meter box from existing position carefully for refixing including making good to disturbed surfaces, complete all as specified and directed. Note :- Disturbed surfaces should be making good by plastering/ distembering/ colour washing/ white washing to match with existing surfaces as directed by EIC.

Re-fixing of serviceable electric meter with meter box by scouting to the wall and fix firmely, complete all as specified and directed.

M&L for submain wiring with two run single core 6 Sqmm FRLS copper counductor cable PVC insulated, unsheathed, 1100 Volt including 25mm dia PVC concealed conduit medium grade ISI marked with all accessories such as tees, elbows, junction boxes etc. as required fixed on wall alongwith one run of 6 Sqmm single core PVC FRLS insulated unsheated copper counductor cable as continuous earth wire and connecting to exisiting main switch board/ distribution board and testing on completion etc, complete all as specified and directed. Note :- Two runs of 6 Sqmm and one run of 6 Sqmm cable and one run of PVC conduit/ casing caping shall be measusred as one unit.

SupplyIing, laying / fixing and testing in replacement XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 4 core in trenches/floor/pole/GI pipe complete including cutting/chasing to any surface and making good to the disturbed surface to match the existing, complete all as specified and directed.

Excavation in trenches, not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth for foundation, shaft, laying of cable/pipe etc. and getting out in any type of soil, complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25cm thick, complete all as specified and directed.

Removing excavated material n exc 50m and depositing where directed at a level n exc 1.5m above the starting point, complete all as specified and directed.

M&L for dry river sand as cushioning to underground cable provided with a layer of sand of 8cm thick before laying cable and15cm thick after laying cable and stretching the cable, complete all as specified and directed.

Supply and lay brick class ‘B’ covering as mechanical protection to cable with well burnt all as spec, complete all as specified and directed.

M&L for 40mm bore GI tubing, light grade with all fitting and fixed to walls/ poles or laid in floors, complete all as specified and directed.

Notes :- An amount of Rs. 1,32,351.00 on account of Credit Schedule for Schedule 'A' Part-II shall be deducted from total quoted amount of BOQ to arrive at the contract sum.

paras ram pachiala (BID ID -3071390)

M/S SHREE RAM DUBEY AND SONS (BID ID -3083719)

TULSI RAINA AND SONS (BID ID -3072405)

HANS RAJ SHARMA (BID ID -3082732)

JOGINDER SINGH (BID ID -3072248)

d d builders (BID ID -3072373)

M/S GURBACHAN SINGH (BID ID -3083401)

ASHOK KUMAR PURI (BID ID -3071901)

M/s ARJUN SINGH (BID ID -3071735)