REPAIR TO BOUNDRY COMPOUND WALL FENCING PATH DRAIN AND CONNECTED WORK IN CFL AND 339 ASC TIMARPUR UNDER AOR OF AGE BR II OF GE NORTH DELHI CANTT 10

Amount

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in CM or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework & precast concrete articles complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion & making good disturbed ground embedded in concrete, brick work, masonry, etc. complete all as specified and directed.

Dismantling fencing wire mesh, any type complete all as specified and directed.

M&L for brick work with old size burnt clay bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

M&L for 15mm thick ready mix cement plaster on fair faces of brick work or concrete surfaces on external wall surface including necessary cement slurry with bulk density 1.40 to 1.70 kg/cum, water ratio 17 to 19% by weight & compressive strength as per IS 4031 part 6 applied as per manufacturer finished even and smooth complete all as specified and directed.

M&L for 15mm thick ready mix cement plaster on surfaces other than fair faces of brick work or concrete surfaces on external wall surface including necessary cement slurry with bulk density 1.40 to 1.70 kg/cum, water ratio 17 to 19% by weight & compressive strength as per IS 4031 part 6 applied as per manufacturer finished even and smooth complete all as specified and directed.

M&L for preparation of new plastered wall surface and applying two coat of white cement wash over one coat primer complete all as specified and directed. Note:- The cost of necessary scoffolding & T&P required of work is deemed to be included in quoted rate against this item and work will be executed i highrise bldgs.

M&L for water based premium acrylic smooth exterior emulsion of approved colour with silicon additive & colour stay technology, excellent dirt pick up resistance of Asian Paints Ltd or its equivalent with low VOC less than 50, Anti algal properties in two coats over new prepared surface @ 1.79ltr (undiluted)/10Sqm diluted with water 5:2 ratio applied over priming coat with fully automatic airless spray machine of paint application having a pressure of 3300PSI. Allow 6-8hrs to dry the surface for painting of subsequent coats complete all as specified and directed.

M&L for applying two coats of white cement wash on the old painted surface of wall after scrapping to prepare the surface even and smooth and complete removing existing treatment by sanding of the old painted surface with sanding pad of 240 grit or above having dia 7"/9" to make the surface free from dust of existing wall by skilled labour complete all as specified and directed. Note:- The cost of necessary scoffolding & T&P required of work is deemed to be included in quoted rate against this item and work will be executed i highrise bldgs.

M&L for water based premium acrylic smooth exterior emulsion of approved colour with silicon additive & colour stay technology, excellent dirt pick up resistance of Asian Paints Ltd or its equivalent with low VOC less than 50, Anti algal properties in two coats on old surface @ 1.79ltr (undiluted)/10Sqm diluted with water 5:2 ratio applied over priming coat with fully automatic airless spray machine of paint application having a pressure of 3300PSI. Allow 6-8hrs to dry the surface for painting of subsequent coats.

M&L for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified (Payment for providing grooves shall be made separately).

M&L for forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction.

M&L PCC 1:2:4 type B1 using 20mm graded crushed stone aggregate as in coping, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, complete all as specified and directed.

S&F hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled & countersunk for balusters running bars, for doors,balusters,nosing to steps including embeding in concrete & screwing etc. wind ties for roof including securing bolts; posts & struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., & similar work conforming to Fe 290-0 Gde E-165 complete all as specified.

S&F galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings & straining & fixing to any type of standard rails straining bolts, including, securing or tying at crossings with & provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed.

M&L for punched tape concertina coil (PTTC) 610mm dia coil provided on Y shaped MS section including necessary biding/welding (each line wire to be measured) complete all as specified and directed.

Supply only chain link MS galavnised any size and type complete all as specified and directed

Fixing only chain link fencing including line wires any mesh size & type to any type of standards rails straining bolts etc. including provision of bindig wire complete all as specified and directed.

S&F screw bolts (machine made) with hexagonal or squre heads with dia of neck 5 to 10mm at one end and screwed the other each screw to be fitted with one washers and one hexagonal or square nut length of bolts not exc 5cm and dia of shank 10mm complete all as specified and directed.

M&L for two coats of synthetic enamel paint (1st quality) on new steel painted surfaces including preparation of surfaces of any description not otherwise descriped over 10 cm width or grith and applying one coat of red oxide, zinc chrome complete all as specified and directed. Make:- Asian paint/Berger/Shalimar/Nerolac or equivalent as approved by GE

M&L for one coat of synthetic enamel paint (1st quality) on old steel painted surfaces including preparation of surfaces of any description not otherwise descriped over 10 cm width or grith complete all as specified and directed. Make:- Asian paint/Berger/Shalimar/Nerolac or equivalent as approved by GE

Demolition of cement concrete in ground floor (unreinforced) and pavings including tiles etc, n exc 15cm thickness (below or above ground level) complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in surface channels, drains, side guide wall including all necessary form work complete all as specified and directed

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped end etc. complete all as specified and directed.

M&L for plain cement concrete M-10, nominal mix, type C-1, using 20mm graded mechanically crushed stone aggregate, 75mm thick as in plinth protection etc., surface finished even and smooth without using extra cement and laid to a slope of 1 in 24 in alternate panels n.exc. 1.20 Sqm each, 12mm wide and 5 cms deep joints shall be formed between the bays and shall be filled with mastic filling comprising a mixture of one part of heated blown bitumen VG-10 and two parts of heated coarse sand (by volume), all as specified & directed. Note:- The unit rate include for use of form work (straight or curved).

M&L for plain cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate, 75mm thick as in sub base cemplete all as directed and specified

M&L chequered cement concrete tiles PU coated 300mm x 300mm by 30mm thick, with grey cement and no pigments, jointed and pointed in neat cement slurry as in floors over and including 15mm thick screed bed or bedding layers in CM 1:6, complete all as specified and directed.

M&L machine precast colour concrete decorative interlocking paver block with grey cement and pigment of any shape and size confirming to IS15658-2006 of 60mm thickness M-35 Gde complete all as specified and directed.

M&L sand filling under floors including watering and consolidation complete all as specified and directed.

M&L for providing precast reinforced cement concrete type B0, 1:2:4 using 12.5mm graded aggregate as in jallies 45mm thick (measured solid) set in cement mortar 1:4, complete all as specified and directed.

S&F for precast fibre reinforced cement concrete perforated drain cover of size 450mm x 600mm and 75mm thick with MS flat at side of cover with necessary holding arrangement complete all as specified and directed.

QUALITY CONSTRUCTIONS CO

DEEP ASSOCIATES

BEHAL TRADERS

Commercial Traders

MOHIT ENTERPRISES

M/S VERMA BUILDER