Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹27.0 LAccepted-AOC | L-1 | Accepted-AOC L-1 firm in the tender | |
| 2 | L-2₹45.1 L+₹5.1 L (12.8%)Rejected-Finance A 204 NYAYKHAND 1 INDIRAPURAM GHAZIABAD GHAZIABAD UTTAR PRADESH 201014 | GHAZIABAD | UTTAR PRADESH | 201014 | L-2 | Rejected-Finance L-2 Firm in the tender. | |
| 3 | Rejected-Technical | - | Rejected-Technical PQC Not Full-filled |
Tender Value
₹26.5 L
EMD Value
₹53,035
Closing Date
6 Jun 2022, 2:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Superintending Engineer
Coal Handling Circle, HTPS,Kasimpur.
Annual contract for the work of Unloading of coal through W/T and manually, feeding of coal.
2022_RVUNL_701525_1
STET-02/CHC/CHD-I/HTPS/2022-23
Open Tender
Coal
Fixed-rate
365 days
Coal Handling Circle, HTPS, Kasimpur
As per tender specification
3 documents required · 3 mandatory
₹3,129
SAO CFA and BO C TPS
₹53,035
Coal Handling Circle, HTPS, Kasimpur
2 Jul 2022
21 May 2022
8 Jun 2022
21 May 2022
6 Jun 2022
21 May 2022
21 May 2022 - 6 Jun 2022
31 May 2022
Amount
Unloading of Coal from railway wagons through wagon tipplers including release of brakes of wagons and shunting operation of rake as per scope of work Including operation in C/R Schedule of Quantities & Rates FOR ‘A &B’
Coal feeding & cleaning during Shift operation in C/R. as per scope of work mentioned at ‘C’ Part-I
General Cleaning (Unit is Running Condition/ under Forced shut-down ) as per scope of work mentioned at ‘C’ Part-II
Schedule of Quantities & Rates FOR ‘D’
Removal of old & worn out hammer set of Russian crusher after opening the crusher body.
Fitting of new hammer set after weighing them.
Balancing of old &used hammer set by re-moralizing & cutting.
Fitting of old & used balanced set of hammer by reversal of direction of complete hammer set.
Taking out of damaged rotor assembly.
Fabrication of old rear /front side grating from 20/40mm.
Replacement of 20mm /40mm thick rear side grating.
Replacement of 20mm /40mm thick front side grating.
Removal of rear half body of crusher after cutting pieces of the top hopper.
Removal of front half body of crusher after cutting pieces of top hopper
Refitting of rear half body of crusher & fitting of removed pieces on top hopper.
Refitting of front half body of crusher & fitting of removed pieces on top hopper
Replacement of crusher beam liner.
Fabrication of square plate.
Replacement of square plate
Fabrication & replacement of complete crusher body liner.
Fabrication of bypass damper.
Replacement of bypass damper.
Fabrication of crusher by pass grating.
Replacement of crusher by pass grating.
Fabrication & replacement of any one liner of crusher body.
Repairing of moving trolley having 3 no front gratings.
Repairing of rear side stationery grating, Frames.
Fitting of repaired rotor assembly.
Removal of damaged / useable rotor bearing no.3656/22356.
Fitting of new /useable rotor bearing no.3656/22356.
Removal of coupling of crusher rotor.
Removal of coupling of motor rotor.
Fitting of coupling of crusher rotor.
Fitting of coupling of motor rotor.
Removal of rotor of motor.
Fitting of rotor of motor.
Static balancing of crusher rotor.
Shifting of crusher motor stator from crusher house to turbine hall.
Shifting of crusher stator from turbine hall to crusher house.
Shifting of crusher rotor from crusher house to turbine hall.
Shifting of crusher rotor from turbine hall to crusher house.
Repairing of crusher half body ( rear /front ) by 25mm/32mm thick ms plate.
Greasing of bearings of crusher rotor.
Removal of chocking of crusher from coal.
Tightening of 22nos foundation bolts of crusher.
Hard facing in the working surfaces of coal crusher hammers (69nos) by welding process.
Alignment of crusher rotor with motor rotor.
Remetalizing of Coal Crusher Hammers (69 Nos.) by welding process
Matching of white metal bearing of motor rotor
Schedule of Quantities & Rates FOR ‘E’ ( TRF W/T)
Rubber lining on rest walls of TRF Wagon Tippler.
Strengthening of platform Bottom structure of TRF Wagon Tippler.
Fabrication of grating of hopper of TRF Wagon tippler.
Replacement of grating of hopper of TRF Wagon tippler.
Fabrication & Erection of hopper of vibrating feeder.
Schedule of Quantities & Rates FOR ‘E’(RUSSIAN W/T)
Repairing / replacement of vertical shock absorbers.
Strengthening of flanges of pipe bracing at non-driving end.
Repairing and strengthening of top beam of tippler rotor.
Repairing of rail rim of middle Disc.
Repairing / Overhauling of guide rollers.
Strengthening of cradle beam.
Strengthening of bottom beams of platform.
Rubber lining on Rest walls.
Replacement of worn out plate form rails.
Fabrication & erection of hopper of belt feeder.
Repairing / overhauling of stop rollers of Russian wagon tippler.
Checking / tightening & replacement of bolts provide for fixing the spur gear at both the sides of tippler.
Alignment of pinion to spur gear & gear box.
Repairing/ replacement of pinion shaft/ pinion.
SERVICING/GREASING / OILING OF THE BUSHES/BEARINGS OF TRF & ELECTRIC PUSHER:-
Servicing & greasing / oiling of the bushes of tippler pulleys (Sheeves) which are given as below:- (TRF)
Bushes of Drum & Counter weight pulleys (Sheeves).
Bushes of wire rope carrying drum.
Bushes of wire rope carrying drum.
Replacement of worn out/ damaged bushes & shaft (Pin) of inhaul/outhaul system big pulley (Sheeve).
Replacement of worn out/ damaged tension trolley pulley(Sheeve)/bushes & shaft of pulley of inhaul/outhaul system.
Replacement of worn out/ damaged bushes & shaft (pin) of counter weight pulley (Sheeve).
Schedule of Quantities & Rates FOR ‘F’
Cutting, splicing, cleaning of both sides of conveyor belt to be jointed together and vulcanizing of joint by Cold process.
A.1000mm wide conveyor belt.
B. 1200mm wide belt.
C. 1400mm wide belt.
Removal of Old damaged/partly useable and laying of new/reusable belt.
Dragging of belt on Conveyor Super-structure.
Fastener Jointing on belt.
Shifting of Conveyor belt from ‘0’M to + 30M at conveyor 5A/5B.
Repairing of torn out belt by stitching with G.I. wire.
Repairing the damaged fastener joint by stitching with G.I. wire.
A- Upto half Joint length.
B- More than half joint length.
Refixing of side rubber which comes out from its place(one side)
Removal of old/damaged side rubber, fabrication of new side rubber and fixing it on its place.
Dismantling and refitting of discharge hoppers of wagon tippler (above belt feeders) for replacement/re-jointing of conveyor belt of belt feeder.
Patch work of repairing of small cuts of 10x100Cm size by fixing rubber with cold solution by preparing the surface properly.
Schedule of Quantities & Rates FOR ‘G’
Fabrication and replacement of complete mother plate 10/12 mm of any hopper of conveyor system. Size of hopper 850 to 1200 mm width and 4 to 5 meter height.
Fabrication and replacement of complete liner plate 8/10 mm of any hopper of conveyor system. Size of hopper 850 to 1200 mm width and 4 to 5 meter height.
Fabrication and replacement of complete single plate 10/12 mm of hopper of any transfer point. Size of hopper 850 to 1200 mm width and 4 to 5 meter height
Repairing of any hopper by patch work with following size MS plate:-
a) Up to 300x300 mm.
b) Up to 400x400 mm.
c) Up to 600x600 mm.
d) Up to 850x400 mm.
e) Up to 850x600 mm
Fabrication and replacement of supporting structure of any conveyor.
Strengthening of overhead conveyors by use of plates, angles, channels and joints.
Schedule of Quantities & Rates FOR ‘H’ Repairing and greasing of conveyors rollers & drums
Servicing of Rollers:-
Steel rollers of 1200 mm conveyor
Steel rollers of 1400 mm conveyor
Steel rollers of 1000 mm conveyor
Rubberized roller 1200 mm conveyor
Rubberized roller 1400 mm conveyor
Rubberized roller 1000 mm conveyor
Return roller 1200 mm conveyor
Return roller 1400 mm conveyor
Return roller 1000 mm conveyor
Greasing/Servicing of bearing of drums
Bearing of drive drum of 1400 mm conveyor
Bearing of drive drum of 1200 mm conveyor
Bearing of drive drum of 1000 mm conveyor
Bearing of driven drum of 1400 mm conveyor
Bearing of driven drum of 1200 mm conveyor
Bearing of driven drum of 1000 mm conveyor
Bearing of snub drum of 1400 mm conveyor
Bearing of snub drum of 1200 mm conveyor
Bearing of snub drum of 1000 mm conveyor
Greasing of bearings of counter weight pulleys of 1400/1200 mm conveyor
Bearing of counter weight pulley of 1400 mm conveyor.
Bearing of counter weight pulley of 1200 mm conveyor.
Bearing of counter weight pulley of 1000 mm conveyor.
Servicing/Greasing of guide rollers of Winch trolley of conveyor K-5A&5B.
Repairing idler frame of any conveyor.
Star O and M Group
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .