PROVISION OF SETTING UP OF ADVANCED SOFTWARE ENGINEERING LABORATORY AT BUILDING NO 98 AT GTRE BANGALORE

Amount

Demolition of cement Concrete of any description and in any position not otherwise specifically provided for

M & L for terrazzo tiles 20cm x 20cm x 20mm thick, with size of chips upto 12mm; set, jointed and pointed in neat cement slurry in floors, and cut and polished including Screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and as directed

Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including screed bed or bedding layer of mortar 20 mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and as directed

Machine cut Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and as directed

M & L for PCC 1:2:4 type B1, 25 mm thick (using 20 mm graded stone aggregate) as in flooring / paving finished rough to receive cement tiles complete all as specified and as directed

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortarr including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete

M&L brick work with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and as directed

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete

M&L rendering 15mm thick in cement mortar 1:4 on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing and finished even smooth without using extra cement complete all as specified and as directed

M&L rendering 10mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces and finished even smooth without using extra cement complete all as specified and as directed

M & L for preparation of new plastered surfaces of wall and applying 3mm thick wall care putty to receive the good & smooth surfaces and applying two coats of distemper oil emulsion paint over a coat of primer complete all as specified and as directed

Material & Labour for preparation and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed.

M&L PVC insulation panels 10 mm thick with EPS stuck to 1mm printed PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./M.S. incl Anodised aluminium snap grid frame work for false ceiling and Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified

Taking down Chowkhats or frames exc 1.5 sq. m but n exc 4 sqm each with shutters (without taking off shutters from the frame)

Taking down Chowkhats or frames n exc 1.5 sq. m each with shutters (without taking off shutters from the frame)

M&L block boards, grade 2 quality, interior grade, decorative type with both sides decorative fixed with screws to timber frame work complete all as specified and as directed

S & F Continuous (piano) hinges, Width of flaps (when open) is 40mm mild steel, bright finish or electrogalvanised complete all as specified and as directed

S&F for factory made Pressed steel made out of mild steel black sheet of 1.25 mm thick of profile 105 x 60 mm for frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified including one shop coat of priming and threshold of 12 mm dia round bar 1 nos welded at bottom of frame complete all as specified and as directed

S&F factory made Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides and both faces are covered with decorative face veneer with lipping/frame to match. Bonding shall be with formaldehyde glue to ensure stinger bonding and longer life of door complete all as specified and as directed.

S & F Butt hinges 100 mm size, medium weight, cold rolled mild steel, and fixed complete all as specified and as directed

S & F 125 mm size Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed

S & F 150 mm size exruded Aluminium alloy handles, fabricated type, anodised complete all as specified and as directed

M&L aluminium alloy, anodised, sliding door bolt 250 mm long with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed

S&F floor door stopper of 150 mm size of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed

M&L solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening all as specified

M&L factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S & F 100 mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed

S & F 100 mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed

M & L for complete removal of existing treatment and preparation of old plastered surfaces of wall and applying 3 mm thick wal care putty to receive the good and smooth surfaces and applying two coats of distemper oil emulsion paint over a coat of primer complete all as specified and as directed

M & L for complete removal of existing treatment and preparation of old plastered surfaces of ceiling and applying 3 mm thick wal care putty to receive the good and smooth surfaces and applying two coats of distemper oil emulsion paint over a coat of primer complete all as specified and as directed

M&L preparation of old painted steel surfaces of any description over 10 cement mortar width or girth and applying one coat of synthetic enamel paint all as specified.

M&L preparation of old painted wooden surfaces of any description over 10 cement mortar width or girth and applying one coat of synthetic enamel paint all as specified.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads

S & F 3.0 mm thick Sheet glass, ordinary quality frosted on one side in square exc 0.5 sq. m in each pane with rubber beading etc as in windows, doors & partition complete all as specified and as directed

Removing of demolition material, debris outside MD land distance exc 1km n exc 5 km from the strating ponit

Taking down UPVC (SWR) pipes any dia

S & F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed

S & F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed

S & F PVC (SWR) bends of any radius 75 mm dia of bore complete

S & F PVC (SWR) bends of any radius 110 mm dia of bore complete

Supplying and laying of 25 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified.

S&F sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed

S&F bib taps, fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed

S & F Powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and as directed

S & F Powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc complete all as specified and as directed

S & F Powder coated aluminium window and ventilator shutters, side hung /sliding / fixed type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, anodised aluminium fittings if any required such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) complete all as specified and as directed

S & F 4 mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane with rubber beading etc as in windows, doors & partition complete all as specified and as directed

S & F 4.8 mm thick sheet glass, ordinary quality frosted on one side in square exc 0.5 sq. m in each pane with rubber beading etc as in windows, doors & partition complete all as specified and as directed

S & F 9mm thick Prelaminated particle board, exterior grade, prelaminated both sides with decorative choice lamination fixed with screws or aluminium clips to timber frame work or to aluminium fame work complete all as specified and as directed

S & F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed

S & F venetial blinds vertical type 100 mm width with approved fabric and powder coated aluminium fittings such as top rails metal weight nylon button loops etc to match with the top rail metal base complete all as specified and as directed

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed

Taking down carefully aluminium point wiring (light,fan,socket or power) complete with fittings such as switches, sockets, ceiling rose and making good the disturbed surfaces of wall/ceiling etc complete all as specified and as directed

Point wiring complete with Multi stranded copper conductor size 1.5 sqmm PVC insulated, unsheathed,FRLSH cable , 1100 volts grade conforming to IS 694 multistranded , drawn in and including rigid PVC surface type conduit / casing capping on walls/ floors/ ceiling etcwith and including metal flush boxes of suitable size and modular white plate with frame for mounting of fittings, modular type switches, regulator and also including 1.5 sqmm PVC insulated unsheathed copper cable green in colour as continuous earth continuity conductor and connecting to earth dolly, cutting chasis to the wall s/ floors/ ceiling and repairing with existing surface after work ,complete all as specified and directed.

One light/fan point controlled by one switch

One 5 Amps Socket point on same board controlled by one switch

All as per ser item No 54 above but using 4 sqmm PVC insulated unsheathed, multistranded copper conductor cable with 4 sqmm continuous earth conductor for one 3 pin 15 amps socket outlet on an independent board

Supply and fixing of switch modular 1 way 6 amps, 1 module with frame and cover 230 volts complete all as specified

Suppky and fix socket , 6A 2/3 pn Combined 2 module

Supply & fix ceiling rose surface backlite three terminal complete all as directed

Supply and fixing of switch modular 1 way 16 amps, 1 module with frame and cover 230 volts complete all as specified

Supply and fixing of socket modular 6/16 Amps 2/3 pin combined 2 module with frame and cover 230 volts grade complete all as specified

Supply and fix modular fan step regulator ,120W-2 module

M & L for taking down existing ceiling fan any sweep from the ceiling and kept in safe custody and making good the disturbed surfaces of ceiling etc complete all as specified and as directed ( NOTE : Removing old celing fan and deposit to EM stores)

M&L for refixing celing fan/exhaust fan any sweep on ceiling after reparing/servicing and replacement of bush,braring, rubberbush,nuts,boilts and washere, and small spares including synthetic enamel paint painting as required and making celing fan serviceable including three core flecible wire from ceiling rose to fan all as specified and as directed Note : celing fan /exhaust fan dismantled against item No 64

Supply and fix LED luminaires square type 2x2 35/36W with Environmental friendly new generation aestheticall designed ,ultra modern recess mounting iuminaire with high brightness SMD LEDs as light sourse sutible for armstong/gypsum or similar ceiling mounting system including connecting to ceiling rose with twin copper conductor of size 0/0.24 complete all as specified and directed by Engr-in-charge.

Supply & fixing only LED batten with aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & intregrated electronic driver1 x 20 watts fixing on wall/ celing complete all as specified as directed.

M&L for submain wiring with 2 runs of 4.0 sqmm single core PVC insulated stranded copper conductor cable drawn through suitable rigid non metallic PVC conduit with one run of 4.0 Sqmm PVC insulated copper conductor cable as earth continuity conductor and necessary connections all as directed. (AC POINT) Note : 2 runs of 4 sqmm PVC insulated unsheathed copper conductor and 1 run of 4.0sqmm PVC insulated unsheathed copper conductor and 1 run of PVC conduit will be measured as single run

M&L for submain wiring with 4 runs of 6.0 sqmm single core PVC insulated stranded copper conductor cable drawn through suitable rigid non metallic PVC conduit with one run of 6.0 Sqmm PVC insulated copper conductor cable as earth continuity conductor and necessary connections all as directed.( for UPS power socket) Note : 4 runs of 6 sqmm PVC insulated unsheathed copper conductor and 1 run of 6.0sqmm PVC insulated unsheathed copper conductor and 1 run of PVC conduit will be measured as single run

M&L for submain wiring with 4 runs of 16 sqmm single core PVC insulated stranded copper conductor cable drawn through suitable rigid non metallic PVC conduit with two run of 10 Sqmm PVC insulated copper conductor cable as earth continuity conductor and necessary connections all as directed. Note : 4 runs of 16 sqmm PVC insulated unsheathed copper conductor and 02 run of 10 sqmm PVC insulated unsheathed copper conductor and 1 run of PVC conduit will be measured as single run

Supply and fixing LED flood light 70 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp all as specifed and directed.

Supply and fixing Distribution board Power line Vertical TPN MCCB DBs with IP 54 Protection metal door 415 volts,8 way with double door fixed on flush to the wall including making the hole in th wall and fixing the DB including cement work and plastering complete including comprising the following all as specified and as directed Make of VTPN MCCB 125A DBs INDOASIAN /ABB/L&T (a) MCCB with thermal magnetic release 415 volts 3 pole 105 Amps capacity and breaking capacity 25 KA - 01 No Make of MCCB :INDOASIAN /ABB/L&T/Legrand (b) MCBs 10 KA breaking capacity SP 230 volts 6 to 32 Amps - 32 Nos Make of MCBs :INDOASIAN /ABB/L&T/Legrand .

S&F SPN MCBs distribution board of sheet metal enclosure factory made double door powder coated single pole and neutral with 200 amps rated bus bar 4 way 240 Volts

S& F MCB SPN 32 Amps 10 KA capacity 240 Volts all as directed Make :- Indo Asian C&S /CG/Legrand

S& F MCB single pole 6 to 32 Amps 10 KA capacity 240 Volts all as directed Make :- Indo Asian C&S /CG/Legrand

S & Fix single pole and neutral and earth enclosure with a three pin and earth plug with socket complete with one double pole MCB DP 20 Amps.

S & Fix Ttriple pole and neutral and earth enclosure with a three pin and earth plug with socket complete with one triple pole MCB TPN 63 Amps. Note ;For server room

S& F MCCB 100 Amps 16 KA capacity 415Volts with encloser fixed on wall all as directed Make :- Indo Asian C&S /CG/Legrand

Earthing complete with 600x600x6.00MM thick GI earth plate electrode buried directly in ground not less than 2.25 mtr below GL with the top edge of the plate at a depth not less than 1.5 mtr from GL, connected to GI earth lead of 4.0 mm dia by means of nuts, bolts, washers, checknuts etc, made out of galvanised iron or steel, earth wire protected by galvanised iron pipe, connected to main switch board complete including necessary earth work,excavation,PCC chamber, watering pipe, funnel, wire mesh, RCC chamber cover etc all as specified and directed in EP No:3 of SSR Part-I

Supply and install hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 5 star rating and EER 3.2.of capacity of 2 TR and 220 to 250 volt 50 Hz all as spcified and directed (including copper pipe and refrigerant gas). Make of Split type AC - Blue star /Voltas/LG

S&F voltage stablizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 volts to 250 volts with out put voltage stablized at 230 volts with accuracy of +/- 2.5% and of capacity 5 KVA. Make-V Gaurd/Oricon/Orient

M&L for MS stand duly painted suitable for fixing 1.5 TR and 2 TR AC outdoor unit and fixed complete all as directed.

Supply and laying of extra copper pipe with nitrile rubber tubular insulation using necessary supports ad fasteners complete all as directed.

M & L for HDPE pipe 20 mm dia fixed to wall on roof complete all as directed.

Supply and charge R-32 Refrigerant Gas complete all as specified and directed

Making opening/drilling of size 65 mm dia, using heavy duty stone driller/cutter machine in the stone machinry wall for installing spilit type air conditioners and for passing suction and discharge refrigerant pipe lines, drain pipe, cable etc and making good the disturbed surface all as directed.

M&L for sub main wiring complete with two single core 1.5 Sqmm PVC insulated heavy duty and unnsheathed cable with multistranded copper conductor FRLSH and drawing through in and including PVC conduit of suitable size and connecting terminal ends including provision of 1 run of 1.5 Sqmm insulated copper cable for earth continuity conductor and connecting to earth connectivity.

Supply and fixing addressable type multi Sensor detector with heat and smoke combination all as specified and directed.

Supply and fixing addressable type heat detector with base with rate of rise cum fixed temperature as per IS: 2175 all as specified and directed.

Supply and fixing beam master detector with transmeter and receiver.

Supply and fixing addressable control module

Supply and fixing fire alarm sounders / sirens electronic type horizontal single stage continuous normal operation for atleast 50 minutes with sound level 65 DB to 120DB measured at 1.5 mtr with sound out put variation of 5 DB but 1000 M range

Supply and fixing Response indicator as directed and specified by Engr-in- Charge. Make:-Agni and equivalent.

Supply and fixing Addressable manual call point resettable type as directed and specified by Engr-in- Charge.Make:-Agni and equivalent.

Supply and fixing fire alarm contol panel complying with BS EN 54 single loop panel with 99 detector & 99 module upto 200 detector and module all as specified and directed

Supply and fix sheet steel enclosures double door distribution board, flush/surface mounting with 200 amp rated bus bars, neutral links and earth bar 4 way 240 volt 50 Hz.

Supply and fixing MCB SPN 240 V of cap 40 Amp for the on/off purposeall as specified and directed.

Supply and fixing MCB SP of cap 6 to 32 Amp 240V 10 KA for the on/off purpose all as specified and directed.

Supply and fix UPS for 30 min backup single phase AC input 160 to 260V and out put 230 +1% of capacity 01 KVA

SAI CONSTRUCTIONS

Vishwas Enterprises