CONSTRUCTION OF REMAINED WORK OF MODEL MULTIPURPOSE SEED STORE AND TECHNOLOGY DISSEMINATION CENTRE AT VIKAS KHAND JANI, DISTRICT- MEERUT (U.P)

Amount

Excavation of foundation in ordinary soil (loam clay or sand) including lift upto 1.50 meter and lead upto 30 meter and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and sides of foundation trenches or into the plinth and removal and disposal of sur-plus earth as directed by the Engineer incharge up to a distance of 30 meters from the foundation trenches. (up to 1.50 Mtr depth)

Filling of carted earth complete with machanical compaction in plinth of back platform

Local sand filling in plinth including supply of rate to include cost of all materials labour T & P etc required for proper completion of work.

Providing and laying cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded stone aggregate 40 mm nominal size) in foundation & floor including all cost of material form work, labour, T & P etc for proper completion of work. (Apron)

Antitermite treatment in flooring complete.

Ist Class brick work in 1:4 (one cement and four coarse sand of 2.25 fineness modulus) mortar in foundation & plinth including supply of all materials, labour and T & P etc required for proper completion of the work.

P/laying RCC 1:1.5:3 (M-20) in slab with (1 cement :1.5 coarse sand :3 graded stone aggregate 10 & 20 mm nominal size) including all cost of material, form work, labour, T & P etc for proper completion of work but excluding cost of cement & steel/reinforcment and its fixing including nacessary centring & shuttering. in Septik tank & Soak pit Slab

P/placing of reinforcement steel for RCC work to required sape & size including all cost of cutting, bending & placing/fixing charges with 24 BWG binding wire.

Supply & fixing 6 mm thick china white glazed flooring or skirting dado laid with 1 :3 cement and approved coarse sand mortar finished with white cement slurry jointing and polishing complete including supply of all materials labours & tools etc, required for completion of the work. (size of tiles upto 200x 300 mm).

Cement concrete flooring 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 12-20mm nominal size laid in one layer neat cement (25 mm thick floor).

Providing and laying 0f 8 to 10 mm thick ivory or light shade vitrified tiles of 600 x 600 mm size in flooring or skirting laid with 1:3 cement mortar ( 1 cement : 3 coarse sand) finished with cement slurry & with pigment grouting & polishing complete including supply of all materials, labour and tools and plants etc. requirwd for proper completion of the work. (a) Ground Floor

(b) First Floor

P/Laying of 25mm thick Kota Stone of size in 45x45cm and above flooring over previously prepared base with 2 cm thick 1:3 cement and sand mortar including filling of joints with cement mixed with pigment required for matching the shade of floor as per direction of E/I including cutting with wax polish including supply of all materials, labour T & P etc required for proper completion of work .

P/L Kota stone slab 10 to 12mm thick in riser of steps,skirting,dado & pillers laid on 10 mm thick mortar 1:2 (1 cement : 2 coarse sand), jointed with grey cement slurry mixed with pigment to match the shade of slabs including rubbing and polishing complete.

Supply & fixing of flush doors commercial quality conforming to IS 2202 Part 1 (1983) including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges bolts locks handles springs fitting with necessary screws to be supplied departmentally. (a) 35mm thick Single leaf

(b) 35mm thick Double leaf

Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger, J&N, Shalimar, Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost ofall materials. (a) Ground Floor

(b) First Floor

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm).

Providing and applying white cement based putty of average thickness 1 mm, of approved brand & anufacturer, over the plastered wall surface to prepare the surface even & smooth complete.

Providing & fixing Stainless steel sliding door bolts ISI marked to required colour or shade with nuts and screws etc complete. (a) 250mm x 16mm .

Providing and fixing stainless steel towerbolts (barrel type) with necessary screws etc. complete (a) 250 mm x 10mm

(a) 200 mm x 10mm

Providing and fixing stainless steel handles with screws etc. complete (a) 125 mm

Painting two coat over priming coat (but including cost of priming coat) on steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as LUXOL3,Hi-gloss apcolite superlac, DULUX specified brushing to give an even shade and including cleaning the surface of all dirt,dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work.

Same as item above but on new wood surface.

Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes.

Construction of drain along with apron complete with all material, labour complete.

Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Ordinary cement without any pigment

Providing and filling of light cinder/25 mm O.B. brick ballast under floor of toilet/sunken roofs

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge.

Providing and laying 80 mm thick factory made CC Interlocking tiles with 100 mm thick granular sub-base (size range 53 mm to 0.075 mm) and 50mm thick compacted bed of course sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all complete as per manufacturer's specifications & direction of Engineerin- Charge. 80mm thick Cement concrete paver block of M-30 grade with approved colour, design & pattern.

Providing & fixing white vitereous china water closet squatting pan ISI marked (Indian type W.C. pan) with 100mm sand cast iron P or S trap, 10/12.5 litrs PVC low level flushing cistern with fittings & brackets 40mm dia C.P. flush pipe with fitting & clamps, 20mm over flow pipe with specials and mosquito proof coupling of approved municipal design, painting wherever required including cutting & making good the walls & floors where required. Orissa Pattern W.C. pan of size 580x 440m with integral type foot rests flush pipe and over flow arrangement.

Same as above but for European type W.C. pan with black plastic seat and lid. Make- Cera, Hindustan.

Providing & fixing white vitreous china wash basin with C.I. brackets painted white, 15mm brass pillar taps, brass chain with rubber plug, 32mm brass waste of standard pattern including cutting & making good the walls wherever required. a) Flat back wash Basin size 550x400 mm with single 15mm brass pillar tap.

Providing & fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick asbestos cement sheet ground fixed to wooden cleats with C.P. brass screws and washers.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete, including painting of fittings and brackets, cutting and making good the walls. a) One urinal basin with 5 litre white P.V.C. automatic flushing cistern

Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete. (a) 32 mm dia (for wash basin)

(b) 40 mm dia (for sink and urinal)

Providing & fixing soil, waste and vent pipes. PVC pipes (working pressure 4 kg / cm 2 ) with all fittings 100 mm dia

PVC pipes (working pressure 4 kg / cm 2 ) with all fittings 75 mm dia

Providing & fixing PVC Floor trap of self cleaning design with sand cast iron screwed down or hinged grating with or without vent arm complete, including cost of cutting & making good the walls and floors. (a) 100 mm linlet & 100 mm outlet

100 mm linlet & 75 mm outlet

Providing & fixing PVC coller (a) 100 mm dia

(b) 75 mm dia

Providing & fixing PVC bend of required degree with access door insertion rubber washer 3 mm thick, bolts & nuts complete . (a) 100 mm dia

(b) 75 mm dia

Providing & fixing PVC plain Bend of required degree. (a) 100 mm dia

(b) 75 mm dia

Providing & fixing PTMT towelrail complete with C.P. brass brackets fixed to wooden cleats with C.P. brass screw 450mm. Long with total length of 495mm, width 78mm and effective height of 88mm

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion . (i) Single socketed pipes. A) 100 mm dia

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall. a) 110mm

Providing & fixing CPVC pipes complete with CPVC fittings & clamps including cutting & making good the walls etc. Concealed on wall. (internal work) a) 20mm dia nominal bore

b) 25mm dia nominal bore

Providing & fixing G.I. pipes complete with G.I. fittings & clamps including cutting & making good the walls etc. Exposed on wall. (External work) a) 25mm dia nominal bore (medium duty)

b) 20mm dia nominal bore

Providing and fixing 45 cm long unplasticised PVC connection pipe with brass unions. a) 15mm nominal bore

Providing & fixing C.P. brass bib cock of approved quality conforming to IS 8931 a) 15mm nominal bore

Providing & fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. a) 15mm nominal bore

Providing and fixing ball valve (brass) of approved quality complete. (High or low pressure with plastic floats). a) 20 mm. Nominal bore

Providing and fixing gun metal gate valve with wheel of approved quality. a) 20 mm dia nominal bore

Providing and placing on terrace (at all floor levels) polyethylene water storage tank of approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing C.P brass Angle Valve of approved quality. a) 15 mm nominal bore

Excavating trenches in all kind of soil of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m. including getting out the excavated soil & then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc & disposig of surplus excavated soil as directed within a lead of 50m. a) Pipes 80mm to 300mm diameter.

Providing, laying and joining PVC pipes with PVC solution testing of joints etc. complete. a) 100mm diameter

b) 150mm diameter

Providing & laying cement concrete 1:5:10 (1 cement :5 coarse sand :10 graded stone aggregate 40mm nominal size) alround S.W. Pipes including bed concrete as per standard design. a) 100mm diameter P.V.C. Pipe

b) 150mm diameter P.V.C. Pipe

Constructing brick masonry manhole with F.P.S. bricks in cement mortar 1 : 4 (1 cement : 4 coarse sand) RCC top slab with 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 grade stone aggregate 20mm nominal size); foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1cement 3 coarse sand ) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (1cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) finishd with a floating coat of neat cement complete as per standard design Inside size 90 x 80 cm & 45 cm deep including CI cover with frame

Extra for depth of man hole size 90x80 cm

P & fixing square mouth S.W. Gully trap grade 'A' comp. with C.I. grating brick masonry chamber with F.P.S. bricks of class designation 75 & water tight C.I. cover with frame of 300 x 300mm. size (inside) the weight of cover to be not less than 4.50 Kg & frame to be not less than 2.70 Kg as per standard design. a) 150 x 100 mm. size P type

Providing & laying cement concrete 1:5:10 (1 cement :5 coarse sand :10 graded stone aggregate 40mm nominal size) upto haunches of PVC. Pipes including bed concrete as per standard design. (a) 100mm diameter PVC Pipe

b) 150mm diameter PVC Pipe

Making Rainwater harvesting pit of 3.0 Mtr internal dia and 3.0 Mtr depth as per drawing and 20.0 Mtr depth boring with 100 mm dia stainer PVC pipe complete work as per direction Engg.-in-charge.

Construction of Tubewell/Submersible 150 mm dia 60.0 Mtr depth with installation of 1.5 H.P. submersible pump and its accessories required for the proper completion of the work.

A.K. CONTRACTER

M/S Malik Construction Co