PROVOSION OF FIRE STORE ROOMS AT CERTAIN LOCATIONS AT AF STN DIGARU.

Amount

Excavation in trenches n exc. 1.5 m wide and n. exc. 1.5 m depth for foundation etc. n. exc. 10 sqm on plan and getting out in soft loose soil.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n. exc. 25 cm in hard dense soil.

Removing excavated soil n exc 50 m and depositing where directed at a level n. exc 1.5 m above the starting point.

M&L for plain cement concrete type D-2, 1:4:8 (using 40 mm graded aggregate) as in foundation filling and mass concrete.

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, flat rough finished surface of concrete complete all as specified and as directed.

M&L Formwork to sides of pillars,posts, struts, piers, columns and stanchions, square, rectangular or polygonal rough finished surface of concrete complete all as specified and as directed.

Formwork to soffits of suspended slabs, flat for rough finished surface of concrete such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed.

M&L for RCC M-25 design mix using 20 mm graded stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

M&L TMT bars 10 mm dia and over cut to length bend to shape required, including cranking, bending spirally for hoping for columns hooking ends and binding with MS steel wire (annealed) not less than 0.90 mm dia complete all as specified and as directed

Ditto, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders

M&L for RCC M-25 design mix using 20 mm graded stone aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

M&L for RCC M-25 disgn mix using 20 mm grade stone aggregate as in Columns, pillars, piers,posts and struts complete all as specified and as directed.

M&L brick work with sub class 'B' bricks strait or curved on plan exc 6 M mean radius built in CM (1:6) complete all as specified and as directed.

M & L for 20mm thick rendering in CM (1:4) in external surfaces of wall finished even and fair without using extra cement complete all as specified and as directed.

Supply only Liquid water proofing compound

M&L for rendering 15 mm thick in CM (1:6) on internal surfaces of wall complete all as specified and as directed.

M&L for preparation of newly plastered surface and applying two coat of Acrylic Smooth exterior paint of required shade applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as per manufacturer instruction.

M&L for preparation of newly plastered surface and applying 03 two coat of White wash complete all as specified and as directed.

M&L for 25 th plain cement concrete type B-1, 1:2:4 (20 mm graded aggregate) for laying in floor finishes complete all as specified and as directed.

M&L for 75mm thick plain cement concrete (1:4:8 type D2(using 40 mm graded stone aggregate) as in sub base of floor.

Spreading and levelling in layers n exc. 25 cm thick including well ramming including watering as required complete all as specified and as directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick over 20 mm thick cement screed base in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

M&L for Hardcore of broken stone boulder of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L for plain cement concrete type C-2, 1:3:6 (using 40 mm graded aggregate) 75 mm th as in plinth protection & path finished surface fair and even without using extra cement cement including mastic filling in construction joints with 1 part of bitumen and 3 part of sand by weight complete all as specified and directed.

M&L for providing 40 mm thick cement concrete type B0,1:2:4 (using 12.5 mm aggregate) using water proofing compound as per manufacturer instruction (WPC shall be measured and paid separately) in damp proof course to horizontal or vertical surfaces including necessary formwork complete all as specified and as directed.

M&L for Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified and as directed.

M&L for Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and as directed.

M&L for Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and as directed.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.conforming to Fe-290 (Gde E-165) complete all as specified and as directed

M&L for two coats of synthetic enamel paint over a coat of red oxide primer on newly untreated surfaces of steel over 10cm in width or girth not otherwise described complete all as specified and as directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp?ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note : (i) M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately (ii) For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall beacceptable. Variation in profile dimensionson plus side shall be acceptable but no extrapayment on this account shall be made

S&F 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on the both side complete all as specified and directed.

S&F aluminium anodised barrel tower bolt of extruded section 150 mm long complete all as specified and directed.

S&F 150 mm aluminium alloy handels cast/plate type

S/F Aluminium alloy, anodised, sliding door bolt 300 mm length with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws all as specified and directed

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws all as specified and as directed

S&F Anodised aluminium snap grid frame work main Tee & cross Tee size 25.40X25.40X1.63 mm supported at ends with 38.10X25.40X1.32 mm forming grid 605x605 mm for false ceiling, suspended with 6 mm GI wire , (upto 1200mm length). Adjusting level fixed to roof slab by means of ceilling cleats made out of GI flat 40 x 3 mm size 60 mm long and expansion hold fasterners 12.5mm dia 40 mm long complete all as specified and directed.

M&L for 6mm thick non Asbestos fibre cement building boards , fixed or laid/inserted to timber/GI/Aluminium framework with screws complete all as specified and directed

M&L for preparation of new ceiling surfaces and applying three coat of whitewashr complete all as specified and as directed.

S&F steel ventilator with top hung shutter including hinges, steel peg stay complete all as specified and as directed.

S & F 3 mm thick glass sheet ordinary quality and glazing with oil putty in square n exc 0.5 Sqm in each pane complete all as specified and directed.

Surface excavation not exceeding 30cm deep and averaging 15cm and getting out soft /loose soil complete all as specified and directed.

Removing excavated soil n exc 50 m and depositing where directed at a level n. exc 1.5 m above the starting point complete all as specified and directed.

M/L for Hard core of gauge n.exc 63mm deposited spread levelled in layers n.exc 15cm thick watered and rammed to a true surface using broken stones boulder complete all as specified and as directed.

M&L for PCC (1:3:6) type C2 using 40 mm, 75 mm thick graded stone as in sub base of floors complete all as specified and as directed

M&L for 100 MM thick PCC 1:2:4 type B-1 using 20 mm graded aggregate as in floors complete all as specified and as directed.

Material and Labour for concealed point wiring with FRLS PVC insulated, unsheathed, stranded copper conductor cable single core 1.5 Sqmm for one light point or one fan point controlled by one one way switch incl one PVC insulated, un-sheathed single core stranded/solid copper conductor cable of size 1.5 Sqmm for continues earth wire drawn in and including PVC conduit pipe heavy duty 25 mm dia complete with all accessories including sheet metal MS box of suitable size of 1.2mm thick incl 3.0 mm thick laminated sheet cover and fixed with brass screws, cap washers etc or PVC rectangular switch board of suitable size to be fixed flushed on wall including white washing/colour washing/distempering to match the disturbed surfaces complete all as specified & directed.

Supply and fix switch piano flush type, single pole, one way, 6 Amps 230 volts complete all as specified & directed.

Supply and fixing in repair ceiling rose, surface bakelite 65x50 mm three terminal complete all as specified & directed.

Supply and fixing in repair stepped type electronic fan regulator, flush type on the existing phenolic laminated sheet etc. as required complete all as specified & directed.

Supply and fixing LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified & directed.

S & F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size (waterproof) complete all as specified & directed.

Supply and fixing LED security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection alongwith bracket for fixing of security light fitting made with 32 mm dia light grade GI pipe (not less than 1 Mtr long) with and including MS clamp and two coats of aluminium paint over a coat of red oxide primer complete all as specified and as directed.

Supply and fix ceiling fans, complete with three blade, down rod, accessories 230V, 1200mm sweep, with Squirrel cage induction motor complete all as specified & directed.

Supply and fix exhaust fan, steel body AC single Phase, 230V of size 450mm sweep (heavy duty) with blades, frame and louvers complete all as specified & directed.

Supply and fixing of MCB SPN DB, 04 way made of sheet steel phosphatised, powder painted with 200Amps rated busbar, neutral link, earthbar and Din rail, 230 Volts with Double door complete all as specified & directed.

Supply, fixing, connection and testing MCB SPN 240 Volts, 'C' series, breaking capacity 10kA of rating 6-32Amps.

Supply, fixing, connection and testing MCB SP, 240 Volts, 'C' series, breaking capacity 10kA of rating 6-32 Amps.

Earthing complete with galvanised steel earth plate electrode 60cm x60cm x6mm thick buried directly in ground earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5m below ground level, connecting to the Galvanised iron earth lead wire 4.0 mm dia, by means of nuts, bolts, check nuts and washer etc of galvanised iron and earth lead protected by provision of GI pipe light grade 32mm bore light grade from earthing test point or main controling switch as directed including providing funnel with 20mm bore GI pipe light grade, wire mesh, charcoal or coke andcommon salt in alternative layer of 15 cm (compactedd thickness) all round the earth electrode, concrete earth pit in PCC (1:2:4) type B-1 using 20mm graded stone agagregates with 50mm thick cover of RCC (1:2:4) (re-inforced with 8mm dia TMT bar @15 cm C/C bothways and MS bar handle made of 10mm dia bar) including necessary earth work in excavation, returning in and removal of surplus soil to a distance not exceeding 50mtr, all as per electrical plate No 3 of MES Schedule Part-I including earthing pit cover etc. complete all as specified & directed by Engr-in-Charge.

Supply and lay cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric, power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 sqmm x 2 core.

Excavation in trenches in any type of soil (soft/loose soil) not exceeding 1.5 metre wide and not exceeding 1.5m in depth for LT under ground cables/GI pipes for trenches, complete all as specified and directed.

Returning, filling in, including spreading watering and well ramming in layers not exc 25cm in layers, complete all as specified and directed.

Removal of surplus soil to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point, complete all as specified and directed.

M & L sand coushioning to UG cables (8cm deep before laying of cables and 15 cm over the cable) including spreading, levelling, well ramming in layers. NOTE :- Punned thickness of 18cm only will be considered for payment purpose.

Supply and fix sub class 'B' bricks of standard size for cable protection in trenches complete all as specified and directed.

Supply and fixing GI tubing light grade 40 mm dia for protection pipe complete all as specified and directed.

TRADE CENTRE

M/s Dhruv Enterprises

M/S RAJA CONSTRUCTION

MS DAS CONSTRUCTION

ANZ CORPORATION

Nripen Kalita

B S ENTERPRISE

M/s A R Traders