Construction of various 220 and 132 kV Transmission Lines at 220 kV GSS Beri Bhajangarh Under BN- 91019002404

Amount

Tower: Fabrication, galvanising and supply of various types of towers (including special towers), & its body / leg (equal & unequal) extensions (complete) including stubs and hangers, D-shackles, Bird Guard, U-Bolt, Pack washer, Anticlimbing devices etc.

High Tensile Steel

Mild Steel

Supply of Bolts & Nuts for towers and stubs (including step bolts & nuts and anti theft bolts & nuts, Spring Washers Etc. )

Substation structure All type

Supply of Earthing material of Towers

Pipe Type Set

Supply of following Tower Accessories

Danger Plate

Number Plate

Phase Plate (Set of three)

Design, manufacture and supply of following line material. **

(i) Disc Insulator -70 kN

(ii) Porcellein Long Rod Insulator 70 kN

(i) Disc Insulator -120 kN

(ii) Porcellein Long Rod Insulator 120 kN

ACSR Zebra Conductor

Hardware Fittings for ACSR Zebra Conductor

Single Suspension H/W fittings for ACSR Zebra Conductor

Single Tension H/W fittings for ACSR Zebra Conductor

Double Suspension H/W fittings for ACSR Zebra Conductor

Double Tension H/W fittings for ACSR Zebra Conductor

Accessories for ACSR Zebra Conductor

Mid Span Compression Joint for ACSR Zebra Conductor

Repair Sleeve for ACSR Zebra Conductor

Preformed Armour Rod for ACSR Zebra Conductor

Vibration Damper for ACSR Zebra Conductor

G.I. Earth Wire 7/3.15 MM

Accessories for 7/3.15 Earth Wire

Strain Assembly for Earth Wire 7/3.15mm WITH COPPER Earth Bond

Suspension Assembly for Earth Wire 7/3.15mm with CU E/B

Vibration damper for Earth Wire 7/3.15mm

Mid span compression joint for Earth Wire 7/3.15mm

Repair sleeve for Earth Wire 7/3.15mm

Any Other item required for successful completion of work

Description of Work / Item(s)

Amount

Detail Survey as per tentative route- Which includes the following major activities-Pegging of line route, providing of survey pillar at an interval of 3-4 KM in the line route with required jungle clearance for survey, profile preparation of approved route on graph sheet and marking of offset on either side of line, marking of side clearance for hills, sand dunes etc, as per specification and tower scheduling.

Check survey as per approved route of line which includes- Re-checking of the line route as per approved profile, chainage, tower center marking, pit marking, bisection of angle tower as required at site.

Excavation-Excavation, excluding back filling, including shoring,shuttering, dewatering, etc. upto the required depth as per foundation specification/drawings.

(i) Any soil, soft rock other than hard rock

SETTING OF TEMPLATE & STUB/ANCHOR BOLT:- Setting of template & stub/ anchor bolt & removal after concreting, excluding cost of excavation and concreting but including back filling with excavated/ borrowed earth (with lead & lift) in layers with ramming andwatering as per specification.

(i) Tower including extension upto 9 Meter

CONCRETING: Providing and laying cement concrete for all types of foundation as per latest ISS:456 including cement, sand, stone aggregate 20mm nominal size,water etc., preparing surfaces, shuttering, mixing, placing, ramming, curing, finishing as per specification and drawings.

(i) 1:3:6 Mix (M-10)

(ii) 1:1.5:3 Mix (M-20)

STEEL REINFORCEMENT: Cutting, bending, welding of joints if required,fixing and placing of steel reinforcement as per specification and drawings including material.

EARTHING:

(A) Earthing of towers with pipe type earthing excluding the supply of pipes, wires, flats &connectors, but including coke/charcoal, etc.,excavation,augering and backfilling in all types of soil.

ERECTION OF TOWERS: Erection of super structures including D-shackles,ACD, Hangers, U-Bolts, step bolts, danger plate, phase plate, number plate etc. Also including tack welding of bolts & nuts upto bottom cross arm/beam level including application of Zinc Rich paint

Erection of tower (with extension upto 9 Meters)

CONDUCTOR STRINGING: Stringing of ACSR Panther including hoisting of insulator string, laying, jointing & tensioning of conductor, clamping with Armour rods and fixing of vibration damper per route KM of the line.

(i) Single Conductor

OPGW cable & Accessories

Stringing of 48 Fibre (DWSM) OPGW fibre optic cable

Installation Hardware set for 48 Fibre OPGW Fibre Optic cabling including all cable fittings & accessories except joint box

Joint box (48 Fibre) OPGW Cable

FODP 48F: Indoor Type, rack mounted with FCPC coupling and pigtails

Fiber Optic Approach Cable

48 Fibre (DWSM)

Installation Hardware set for above 248 Fibre, Fibre Optic Approach Cable

DISMANTLING OF TOWERS: Dismantling of super structures alongwith extensions, having tack welded Bolts& Nuts, including removing of D shackles, hangers, U-Bolts, step bolts, ACD,Danger plate, number plate, Phase plate of tower including transportation fromsite to our store and stacking of all material (A) 132 KV and 220KV SIC & D/C Towers (all types

DESTRINGING OF PANTHER (ANY SINGLE - CONDUCTOR)

DE-STRINGING OF 48 FIBRE OPGW CABLE

H/W SET OF OPGW CABLE

Any Other Item

Description of Work / Item(s)

Amount

Detail Survey as per tentative route- Which includes the following major activities-Pegging of line route, providing of survey pillar at an interval of 3-4 KM in the line route with required jungle clearance for survey, profile preparation of approved route on graph sheet and marking of offset on either side of line, marking of side clearance for hills, sand dunes etc, as per specification and tower scheduling.

Check survey as per approved route of line which includes- Re-checking of the line route as per approved profile, chainage, tower center marking, pit marking, bisection of angle tower as required at site.

Excavation-Excavation, excluding back filling, including shoring,shuttering, dewatering, etc. upto the required depth as per foundation specification/drawings.

(i) Any soil, soft rock other than hard rock

SETTING OF TEMPLATE & STUB/ANCHOR BOLT:- Setting of template & stub/ anchor bolt & removal after concreting, excluding cost of excavation and concreting but including back filling with excavated/ borrowed earth (with lead & lift) in layers with ramming andwatering as per specification.

(i) Tower including extension upto 9 Meter

(ii) Special Towers for any span including extension upto 9 Meter

CONCRETING: Providing and laying cement concrete for all types of foundation as per latest ISS:456 including cement, sand, stone aggregate 20mm nominal size,water etc., preparing surfaces, shuttering, mixing, placing, ramming, curing, finishing as per specification and drawings.

(i) 1:3:6 Mix (M-10)

(ii) 1:2:4 Mix (M-15)

(iii) 1:1.5:3 Mix (M-20)

STEEL REINFORCEMENT: Cutting, bending, welding of joints if required,fixing and placing of steel reinforcement as per specification and drawings including material.

EARTHING:

(A) Earthing of towers with pipe type earthing excluding the supply of pipes, wires, flats &connectors, but including coke/charcoal, etc.,excavation,augering and backfilling in all types of soil.

ERECTION OF TOWERS: Erection of super structures including D-shackles,ACD, Hangers, U-Bolts, step bolts, danger plate, phase plate, number plate etc. Also including tack welding of bolts & nuts upto bottom cross arm/beam level including application of Zinc Rich paint

Erection of tower (with extension upto 9 Meters)

Erection of Special tower (with extensions)

Erection of Substation Structure including leveling, setting of stub & tighting, Punching of nuts Bolts and tack welding upto beam level as per spec

CONDUCTOR STRINGING: Stringing of ACSR Zebra including hoisting of insulator string, laying, jointing & tensioning of conductor, clamping with Armour rods and fixing of vibration damper per route KM of the line.

(i) Single Conductor

Earthwire Stringing: Stringing of galvanised steel stranded wire including laying, jointing & tensioning, clamping, clipping and fixing vibration damper and earth bond etc.

(i) One No. 7/3.15 mm galvanised wire

Revitment work

(A) Providing & laying cement concrete including curing compaction etc. complete using stone aggregate 40 mm nominal size (Crusher broken) in foundation plinth using 1 cement : 5 sand : 10 Aggregate mix

(B) Random rubble stone massonary for rivetment in 1:5 cement sand mortat including providing and fixing 100 mm dia PCC drain pipe and raised and cut pointing on stone masonary in 1:3 cement sand mortar excluding excavation but including Back filling inside rivetment using excavated/ borrowed earth (with all lead & lift) in layers not exceeding 20cm in depth & consolidating each depositing layer by ramming and watering.

(C)Cement concrete coping grade 1:2:4 (1 Cement:2 Coarse sand:4 Graded stone aggregate) rounding off edges etc. but excluding the cost of nosing of step etc. complete for 50mm thik with 20mm thik nominal size aggregate

D) Brick Masonary in founadtion & plinth with bricks of class designation 75 in cement mortar 1 : 5 (1 cement : 5 Coarse sand)

DISMANTLING OF TOWERS: Dismantling of super structures alongwith extensions, having tack welded Bolts& Nuts, including removing of D shackles, hangers, U-Bolts, step bolts, ACD,Danger plate, number plate, Phase plate of tower including transportation fromsite to our store and stacking of all material (A) 132 KV and 220KV SIC & D/C Towers (all types

Restringing of ACSR Zebra conductor: Dismantling of vibration dampers and armour rods, fitting in rollers, de-tensioning, holding & lowering of conductor, de-hoisting of insulator stringas required, adding/ removing and jointing of conductor, hoisting of insulatorstring, lifting of conductinto rollers and re-tensioning, jointing, fitting of armourrods and and vibration dampers and clamping per route KM of the line sectionto be restrung dismantled material not re-used to be deposited in our stores & stacked

(i) any Single Conductor

Restringing of Earthwire: Dismantling of earth bond, vibration dampers, declipping & fitting in rollers, de-tensioning, holding & lowering of Earthwire, adding/ removing and jointingof Earthwire, lifting into rollers and re-tensioning, jointing, clipping & fitting ofvibration dampers & earthbond per route KM of the line section to be restrung.Dismantled material not re-used to be deposited in our stores & stacked.

Any Other Item

Description of Work / Item(s)

Amount

Tower: Fabrication, galvanising and supply of various types of towers (including special towers), & its body / leg (equal & unequal) extensions (complete) including stubs and hangers, D-shackles, Bird Guard, U-Bolt, Pack washer, Anticlimbing devices etc.

High Tensile Steel

Mild Steel

Supply of Bolts & Nuts for towers and stubs (including step bolts & nuts and anti theft bolts & nuts, Spring Washers Etc. )

Supply of Earthing material of Towers

Pipe Type Set

Supply of following Tower Accessories

Danger Plate

Number Plate

Phase Plate (Set of three)

Design, manufacture and supply of following line material. **

(i) Disc Insulator - 120kN

Porcelein Long Rod Insulators 120 kN

ACSR Panther Conductor

Hardware Fittings for ACSR Panther Conductor

Single Tension H/W fittings for ACSR Panther Conductor

Accessories for ACSR Panther Conductor

Mid Span Compression Joint for ACSR Panther Conductor

Repair Sleeve for ACSR Panther Conductor

Vibration Damper for ACSR Panther Conductor

OPGW Cable

48 Fibre (DWSM) OPGW fibre optic cable

Installation Hardware set for 48 Fibre OPGW Fibre Optic cabling including all cable fittings & accessories except joint box

Joint box (48 Fibre)

FODP 48F: Indoor Type, rack mounted with FCPC coupling and pigtails

48 Fibre (DWSM)

Installation Hardware set for above 48 Fibre, Fibre Optic Approach Cable

Any Other item required for successful completion of work

Description of Work / Item(s)

Amount

Detail Survey as per tentative route- Which includes the following major activities-Pegging of line route, providing of survey pillar at an interval of 3-4 KM in the line route with required jungle clearance for survey, profile preparation of approved route on graph sheet and marking of offset on either side of line, marking of side clearance for hills, sand dunes etc, as per specification and tower scheduling.

Check survey as per approved route of line which includes- Re-checking of the line route as per approved profile, chainage, tower center marking, pit marking, bisection of angle tower as required at site.

Excavation-Excavation, excluding back filling, including shoring,shuttering, dewatering, etc. upto the required depth as per foundation specification/drawings.

(i) Any soil, soft rock other than hard rock

SETTING OF TEMPLATE & STUB/ANCHOR BOLT:- Setting of template & stub/ anchor bolt & removal after concreting, excluding cost of excavation and concreting but including back filling with excavated/ borrowed earth (with lead & lift) in layers with ramming andwatering as per specification.

(i) Tower including extension upto 9 Meter

CONCRETING: Providing and laying cement concrete for all types of foundation as per latest ISS:456 including cement, sand, stone aggregate 20mm nominal size,water etc., preparing surfaces, shuttering, mixing, placing, ramming, curing, finishing as per specification and drawings.

(i) 1:3:6 Mix (M-10)

(ii) 1:1.5:3 Mix (M-20)

STEEL REINFORCEMENT: Cutting, bending, welding of joints if required,fixing and placing of steel reinforcement as per specification and drawings including material.

EARTHING:

(A) Earthing of towers with pipe type earthing excluding the supply of pipes, wires, flats &connectors, but including coke/charcoal, etc.,excavation,augering and backfilling in all types of soil.

ERECTION OF TOWERS: Erection of super structures including D-shackles,ACD, Hangers, U-Bolts, step bolts, danger plate, phase plate, number plate etc. Also including tack welding of bolts & nuts upto bottom cross arm/beam level including application of Zinc Rich paint

Erection of tower (with extension upto 9 Meters)

CONDUCTOR STRINGING: Stringing of ACSR Panther including hoisting of insulator string, laying, jointing & tensioning of conductor, clamping with Armour rods and fixing of vibration damper per route KM of the line.

(i) Single Conductor

OPGW cable & Accessories

Stringing of 48 Fibre (DWSM) OPGW fibre optic cable

Installation Hardware set for 48 Fibre OPGW Fibre Optic cabling including all cable fittings & accessories except joint box

Joint box (48 Fibre) OPGW Cable

FODP 48F: Indoor Type, rack mounted with FCPC coupling and pigtails

Fiber Optic Approach Cable

48 Fibre (DWSM)

Installation Hardware set for above 48 Fibre, Fibre Optic Approach Cable

DISMANTLING OF TOWERS: Dismantling of super structures alongwith extensions, having tack welded Bolts& Nuts, including removing of D shackles, hangers, U-Bolts, step bolts, ACD,Danger plate, number plate, Phase plate of tower including transportation fromsite to our store and stacking of all material (A) 132 KV and 220KV SIC & D/C Towers (all types

DESTRINGING OF PANTHER (ANY SINGLE - CONDUCTOR)

DE-STRINGING OF 48 FIBRE OPGW CABLE

H/W SET OF OPGW CABLE

Any Other Item

Description of Work / Item(s)

Amount

Tower: Fabrication, galvanising and supply of various types of towers (including special towers), & its body / leg (equal & unequal) extensions (complete) including stubs and hangers, D-shackles, Bird Guard, U-Bolt, Pack washer, Anticlimbing devices etc.

High Tensile Steel

Mild Steel

Supply of Bolts & Nuts for towers and stubs (including step bolts & nuts and anti theft bolts & nuts, Spring Washers Etc. )

Supply of Earthing material of Towers

Pipe Type Set

Supply of following Tower Accessories

Danger Plate

Number Plate

Phase Plate (Set of three)

Design, manufacture and supply of following line material. **

(i) Disc Insulator - 120kN

(ii) Porcelein Long Rod Insulators 120 kN

ACSR Panther Conductor

Hardware Fittings for ACSR Panther Conductor

Single Tension H/W fittings for ACSR Panther Conductor

Double Tension H/W fittings for ACSR Panther Conductor

Accessories for ACSR Panther Conductor

Mid Span Compression Joint for ACSR Panther Conductor

Repair Sleeve for ACSR Panther Conductor

Vibration Damper for ACSR Panther Conductor

OPGW Cable

24 Fibre (DWSM) OPGW fibre optic cable

Installation Hardware set for 24 Fibre OPGW Fibre Optic cabling including all cable fittings & accessories except joint box

Joint box (24Fibre)

FODP 48F: Indoor Type, rack mounted with FCPC coupling and pigtails

Fiber Optic Approach Cable

48 Fibre (DWSM)

Installation Hardware set for above 48Fibre, Fibre Optic Approach Cable

Any Other item required for successful completion of work

Description of Work / Item(s)

Amount

Detail Survey as per tentative route- Which includes the following major activities-Pegging of line route, providing of survey pillar at an interval of 3-4 KM in the line route with required jungle clearance for survey, profile preparation of approved route on graph sheet and marking of offset on either side of line, marking of side clearance for hills, sand dunes etc, as per specification and tower scheduling.

Check survey as per approved route of line which includes- Re-checking of the line route as per approved profile, chainage, tower center marking, pit marking, bisection of angle tower as required at site.

Excavation-Excavation, excluding back filling, including shoring,shuttering, dewatering, etc. upto the required depth as per foundation specification/drawings.

(i) Any soil, soft rock other than hard rock

SETTING OF TEMPLATE & STUB/ANCHOR BOLT:- Setting of template & stub/ anchor bolt & removal after concreting, excluding cost of excavation and concreting but including back filling with excavated/ borrowed earth (with lead & lift) in layers with ramming andwatering as per specification.

(i) Tower including extension upto 9 Meter

CONCRETING: Providing and laying cement concrete for all types of foundation as per latest ISS:456 including cement, sand, stone aggregate 20mm nominal size,water etc., preparing surfaces, shuttering, mixing, placing, ramming, curing, finishing as per specification and drawings.

(i) 1:3:6 Mix (M-10)

(ii) 1:1.5:3 Mix (M-20)

STEEL REINFORCEMENT: Cutting, bending, welding of joints if required,fixing and placing of steel reinforcement as per specification and drawings including material.

EARTHING:

(A) Earthing of towers with pipe type earthing excluding the supply of pipes, wires, flats &connectors, but including coke/charcoal, etc.,excavation,augering and backfilling in all types of soil.

ERECTION OF TOWERS: Erection of super structures including D-shackles,ACD, Hangers, U-Bolts, step bolts, danger plate, phase plate, number plate etc. Also including tack welding of bolts & nuts upto bottom cross arm/beam level including application of Zinc Rich paint

Erection of tower (with extension upto 9 Meters)

CONDUCTOR STRINGING: Stringing of ACSR Panther including hoisting of insulator string, laying, jointing & tensioning of conductor, clamping with Armour rods and fixing of vibration damper per route KM of the line.

(i) Single Conductor

OPGW cable & Accessories

Stringing of 24 Fibre (DWSM) OPGW fibre optic cable

Installation Hardware set for 24 Fibre OPGW Fibre Optic cabling including all cable fittings & accessories except joint box

Joint box (24 Fibre) OPGW Cable

FODP 48F: Indoor Type, rack mounted with FCPC coupling and pigtails

Fiber Optic Approach Cable

24 Fibre (DWSM)

Installation Hardware set for above 24 Fibre, Fibre Optic Approach Cable

48 Fibre (DWSM)

Installation Hardware set for above 48 Fibre, Fibre Optic Approach Cable

DISMANTLING OF TOWERS: Dismantling of super structures alongwith extensions, having tack welded Bolts& Nuts, including removing of D shackles, hangers, U-Bolts, step bolts, ACD,Danger plate, number plate, Phase plate of tower including transportation fromsite to our store and stacking of all material (A) 132 KV and 220KV SIC & D/C Towers (all types

DESTRINGING OF PANTHER (ANY SINGLE - CONDUCTOR)

DE-STRINGING OF 24 FIBRE OPGW CABLE

H/W SET OF OPGW CABLE

Any Other Item

Description of Work / Item(s)

Amount

Tower: Fabrication, galvanising and supply of various types of towers (including special towers), & its body / leg (equal & unequal) extensions (complete) including stubs and hangers, D-shackles, Bird Guard, U-Bolt, Pack washer, Anticlimbing devices etc.

High Tensile Steel

Mild Steel

Supply of Bolts & Nuts for towers and stubs (including step bolts & nuts and anti theft bolts & nuts, Spring Washers Etc. )

Supply of Earthing material of Towers

Pipe Type Set

Supply of following Tower Accessories

Danger Plate

Number Plate

Phase Plate (Set of three)

Design, manufacture and supply of following line material. **

(i) Disc Insulator - 120kN

(ii) Porcelein Long Rod Insulators 120 kN

ACSR Panther Conductor

Hardware Fittings for ACSR Panther Conductor

Single Tension H/W fittings for ACSR Panther Conductor

Double Tension H/W fittings for ACSR Panther Conductor

Accessories for ACSR Panther Conductor

Mid Span Compression Joint for ACSR Panther Conductor

Repair Sleeve for ACSRPanther Conductor

Vibration Damper for ACSRPanther Conductor

OPGW Cable

48 Fibre (DWSM) OPGW fibre optic cable

Installation Hardware set for 48 Fibre OPGW Fibre Optic cabling including all cable fittings & accessories except joint box

Joint box (48 Fibre)

FODP 48F: Indoor Type, rack mounted with FCPC coupling and pigtails

Fiber Optic Approach Cable

48 Fibre (DWSM)

Installation Hardware set for above48Fibre, Fibre Optic Approach Cable

Any Other item required for successful completion of work

Description of Work / Item(s)

Amount

Detail Survey as per tentative route- Which includes the following major activities-Pegging of line route, providing of survey pillar at an interval of 3-4 KM in the line route with required jungle clearance for survey, profile preparation of approved route on graph sheet and marking of offset on either side of line, marking of side clearance for hills, sand dunes etc, as per specification and tower scheduling.

Check survey as per approved route of line which includes- Re-checking of the line route as per approved profile, chainage, tower center marking, pit marking, bisection of angle tower as required at site.

Excavation-Excavation, excluding back filling, including shoring,shuttering, dewatering, etc. upto the required depth as per foundation specification/drawings.

(i) Any soil, soft rock other than hard rock

SETTING OF TEMPLATE & STUB/ANCHOR BOLT:- Setting of template & stub/ anchor bolt & removal after concreting, excluding cost of excavation and concreting but including back filling with excavated/ borrowed earth (with lead & lift) in layers with ramming andwatering as per specification.

(i) Tower including extension upto 9 Meter

CONCRETING: Providing and laying cement concrete for all types of foundation as per latest ISS:456 including cement, sand, stone aggregate 20mm nominal size,water etc., preparing surfaces, shuttering, mixing, placing, ramming, curing, finishing as per specification and drawings.

(i) 1:3:6 Mix (M-10)

(ii) 1:1.5:3 Mix (M-20)

STEEL REINFORCEMENT: Cutting, bending, welding of joints if required,fixing and placing of steel reinforcement as per specification and drawings including material.

EARTHING:

(A) Earthing of towers with pipe type earthing excluding the supply of pipes, wires, flats &connectors, but including coke/charcoal, etc.,excavation,augering and backfilling in all types of soil.

ERECTION OF TOWERS: Erection of super structures including D-shackles,ACD, Hangers, U-Bolts, step bolts, danger plate, phase plate, number plate etc. Also including tack welding of bolts & nuts upto bottom cross arm/beam level including application of Zinc Rich paint

Erection of tower (with extension upto 9 Meters)

CONDUCTOR STRINGING: Stringing of ACSR Panther including hoisting of insulator string, laying, jointing & tensioning of conductor, clamping with Armour rods and fixing of vibration damper per route KM of the line.

(i) Single Conductor

OPGW cable & Accessories

Stringing of 48 Fibre (DWSM) OPGW fibre optic cable

Installation Hardware set for 48 Fibre OPGW Fibre Optic cabling including all cable fittings & accessories except joint box

Joint box (48 Fibre) OPGW Cable

FODP 48F: Indoor Type, rack mounted with FCPC coupling and pigtails

Fiber Optic Approach Cable

48 Fibre (DWSM)

Installation Hardware set for above 248 Fibre, Fibre Optic Approach Cable

DISMANTLING OF TOWERS: Dismantling of super structures alongwith extensions, having tack welded Bolts& Nuts, including removing of D shackles, hangers, U-Bolts, step bolts, ACD,Danger plate, number plate, Phase plate of tower including transportation fromsite to our store and stacking of all material (A) 132 KV and 220KV SIC & D/C Towers (all types

DESTRINGING OF PANTHER (ANY SINGLE - CONDUCTOR)

DE-STRINGING OF 48 FIBRE OPGW CABLE

H/W SET OF OPGW CABLE

Any Other Item

Description of Work / Item(s)

Amount

Tower: Fabrication, galvanising and supply of various types of towers (including special towers), & its body / leg (equal & unequal) extensions (complete) including stubs and hangers, D-shackles, Bird Guard, U-Bolt, Pack washer, Anticlimbing devices etc.

High Tensile Steel

Mild Steel

Supply of Bolts & Nuts for towers and stubs (including step bolts & nuts and anti theft bolts & nuts, Spring Washers Etc. )

Supply of Earthing material of Towers

Pipe Type Set

Supply of following Tower Accessories

Danger Plate

Number Plate

Phase Plate (Set of three)

Design, manufacture and supply of following line material. **

(i) Disc Insulator - 120kN

(ii) Porcelein Long Rod Insulators 120 kN

ACSR Panther Conductor

Hardware Fittings for ACSR Panther Conductor

Single Tension H/W fittings for ACSR Panther Conductor

Double Tension H/W fittings for ACSR Panther Conductor

Accessories for ACSR Panther Conductor

Mid Span Compression Joint for ACSR Panther Conductor

Repair Sleeve for ACSRPanther Conductor

Vibration Damper for ACSRPanther Conductor

OPGW Cable

48 Fibre (DWSM) OPGW fibre optic cable

Installation Hardware set for 48 Fibre OPGW Fibre Optic cabling including all cable fittings & accessories except joint box

Joint box (48Fibre)

FODP 48F: Indoor Type, rack mounted with FCPC coupling and pigtails

Fiber Optic Approach Cable

48 Fibre (DWSM)

Installation Hardware set for above48Fibre, Fibre Optic Approach Cable

Any Other item required for successful completion of work

AMARA RAJA INFRA PRIVATE LIMITED (BID ID -2988935)

AMARA RAJA INFRA PRIVATE LIMITED (BID ID -2988935)

AMARA RAJA INFRA PRIVATE LIMITED (BID ID -2988935)

AMARA RAJA INFRA PRIVATE LIMITED (BID ID -2988935)

AMARA RAJA INFRA PRIVATE LIMITED (BID ID -2988935)

AMARA RAJA INFRA PRIVATE LIMITED (BID ID -2988935)

AMARA RAJA INFRA PRIVATE LIMITED (BID ID -2988935)

AMARA RAJA INFRA PRIVATE LIMITED (BID ID -2988935)

AMARA RAJA INFRA PRIVATE LIMITED (BID ID -2988935)

AMARA RAJA INFRA PRIVATE LIMITED (BID ID -2988935)