Construction of Primary Health Centre at Haripur near Barotiwala, District Solan HP Sub Head Construction of Approach Road i.e cutting, filling, Co R.Walls, BWalls etc. and PL interlocking pavers ic G.I chain link fabric fencing, M.S. Gate a

Amount

Earth Work

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within all leads and lifts.

Earth work in excavation by mechanical means & supplying and filling (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth upto all leads and lifts. as directed by Engineer-in-charge.

Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with all leads including carriage of material in all leads & lifts.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering including carriage of material in all leads & lifts. - All work up to plinth level 1:5:10 (1 cement : 5 coarse sand): 10 graded stone aggregate 40 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form including carriage of material in all leads & lifts. Foundations, footings, bases of columns, etc. for mass concrete

Centering and shuttering including strutting, propping etc. and removal of form work including carriage of material in all leads & lifts.Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering including carriage of material in all leads & lifts. - All work up to plinth level 1:2:4 (1 Cement : 2 coarse sand) : 4 graded stone aggregate 40 mm nominal size)

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing including carriage of material in all leads & lifts. - All work up to plinth level : 1:5:10 (1 Cement : 5 coarse sand) : 10 graded stone aggregate 40 mm nominal size)

Stone filling behind R/wall , B/ walls including carriage of material in all leads and lifts.

Providing and fixing 100 mm dia PVC pipe for weep holes including carriage of material in all leads and lifts.

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in- charge including carriage of material in all leads and lifts. 80 mm thick C.C. paver block of M-30 grade with approved colour & design and pattern. confirming to BIS specifications

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including carriage of material in all leads and lifts.

Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand): 4 graded stone aggregate 12.5mm nominal size) including carriage of material in all leads and lifts

Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil including carriage of material in all leads and lifts

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in cement mortar 1:6 ( 1 cement: 6 coarse sand) including carriage of material in all leads and lifts.

20 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) including carriage of material in all leads and lifts

15 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement: 6 fine sand) including carriage of material in all leads and lifts

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required including carriage of material in all leads and lifts. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works (TATA/ SAIL/RINL)

Painting Steel work with Deluxe Multi Surface Paint to give an even shade including carriage of material in all leads and lifts Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture ( Approved make of Asian/ Nerolac/ICI/ Berger

Providing and fixing G.I. chain link fabric fencing ofn required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. including carriage of material in all leads and liftsMade of G.I. wire of dia 4 mme.

Providing and fixing Stainless Steel SS- Grade-304 Curtain Rod 20 mm dia having walls thickness 1.25 mm i/c 2 Nos. brackets with SS screws & PVC sleevs etc. whereever vecessary. including carriage of material in all leads and lifts

Providing and fixing Stainless Steel fenal Nob i/c necessary screws with PVC sleevs complete in all respect.including carriage of material in all leads and lifts

HARDEEP SINGH

Surinder Singh