SPECIAL REPAIR TO DSC GUARD POST INCLUDING TOWER AND REST ROOM, CONSTRUCTION OF LADIES TOILET AT UG TECH BLDG, PROVISION OF SHED ALONGWITH HARDSTANDING FOR STORAGE OF TROLLEYS IN TECH AREA, PROVISION OF CEMENTED/HARD PATHWAY FROM BOTH SIDE OF MAIN MC

Amount

SCHEDULE 'A' PART-I (B&R WORKS) Demolition Cement Concrete (un-reinforced) of any description in Ground Floors, Pavings, etc. not exc. 150mm thickness (above or below Ground Level) and removing debris, etc. to Outside MD/AF Land, complete all as specified and as directed.

Taking down Cement Plaster including raking out Joints, hacking for Key, scrubbing down with Water and removing Debris, etc. to Outside MD/AF Land, complete all as specified and as directed.

Demolition Brick work built in Cement Mortar and in any Position including all Quoins, Arches and Pillars, etc., and removing Debris, etc. to Outside MD/AF Land, complete all as specified and as directed.

Dismantling Floor, Paver Tiles, Hearth or Wall Tiling, etc. including Cement Mortar Bedding (but not backing) and removing debris, etc. to Outside MD/AF Land, complete all as specified and as directed.

Dismantling Stone Slabs and/or Tiles of any description or thickness in Floors, Aprons, etc. laid, bedded and pointed in Cement Mortar and removing debris, etc. to Outside MD/AF Land, complete all as specified and as directed.

Taking up or down Steel Tubing 15mm bore (dia) and Connections, segregating the Serviceable Pipes and Connections, stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and as directed.

Taking up or down Steel Tubing 20mm bore (dia) and Connections, segregating the Serviceable Pipes and Connections, stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and as directed.

Taking down Chowkhat or Frame any type with Shutter (without taking off Shutter from the Frame), exc. 1.5 Square Metre but not exc. 4.0 Square Metre Each, complete all as specified and as directed.

Taking down and refixing of Shutters of any description in same opening n exc 1sq. m each complete all as specified and as directed.

Taking down Shutters of any description exc 1 sqm but n exc 2sq. m each complete all as specified and as directed.

Taking down Chowkhat or Frame (any type) with Shutter (without taking off Shutter from the Frame), n.exc. 1.5 Square Metre Each, complete all as specified and as directed.

Hacking out old broken Glass (any thickness, size, quality or description) from Wooden or Metal Frames, glazed with putty or fixed with beads, complete all as specified and as directed.

Dismantling old Timber Rifle Rack of any section, any size and in any position, complete all as specified and as directed.

Fixing only steel Rifle rack by using wedge type fully threaded design expansion Zinc Plated Anchor bolt of size 12mm dia and 150mm long in floor complete all as specified and as directed. (NOTE: Steel rack shall be provided by users. Anchor bolt shall be measured and paid separately)

Supply only Wedge type fully threaded design expansion Zinc Plated Anchor bolt of size 12mm dia and 150mm long.

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft/ loose soil complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and as directed.

Returning filling including spreading, levelling, watering and well ramming in layers n exc. 25cm complete all as specified and as directed.

Earth filling under floor including spreading, levelling, watering and well ramming in layers n exc. 25cm thick complete all as specified and as directed.

Removing excavated material n exc 50m and depositing where directed at a level n exc 1.5m above the starting point. complete all as specified and as directed.

M&L for Hardcore of broken stone or boulder of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M & L cement concrete 1:4:8 of type D2 (using 40mm graded stone aggregate) as in filling and mass concrete complete all as specified and as directed.

M&L for Reinforced cement concrete1:1½:3 type A1 (using 20mm graded aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

M&L for Reinforced cement concrete1:1½:3 type A1 (using 20mm graded aggregate) as in columns, pillars, piers, posts and struts etc complete all as specified and as directed.

M&L for Reinforced cement concrete 1:1½:3 type A1 (using 20mm graded aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.

M&L for providing reinforced cement concrete1:1½:3 type A1 (using 20 mm graded stone aggregate) as in roof slabs supported on walls surfaces of concrete flat all as specified.

M&L for RCC 1:2:4 (type B1) using 20mm graded aggregate as counter/platform supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

M&L providing precast cement concrete 1:2:4 using 20 mm graded stone aggregate in cover slabs (for manholes etc), shelves and similar articles with plain faces set in cement mortar 1:6 complete all as specified and as directed.

M&L for RCC Pre-cast Cement Concrete 1:2:4 (12.5mm graded crushed stone aggregate) as in Louvers and Jallies, 25mm thick (measured solid) with all mouldings but excluding frame, set in cement mortar 1:4 complete all as specified and as directed.

M&L for Repairing of RCC Projection, Chajjas, Roofs Facia, Column etc, up to Double Storey Building height, adhering to proper safety precaution and including necessary preparation i.e. scraping, cutting, chiselling and cleaning exposed reinforcement surfaces of damaged, loosed RCC surfaces and applying one coat of cement slurry and filling the surfaces with Cement Concrete 1:1½:3 (12.5mm graded crushed stone aggre-gate) and reinforced with welded wire mesh in patches area, complete all as directed by Engineer in Charge. NOTE : Cost of Form work and welded Mesh shall be deemed to be included in the Quoted Unit Rate.

M&L for Brick Work with Fly-Ash Bricks (Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and as directed.

M&L Brick work using Serviceable Bricks obtained from Item No. 03 here-in-before including removing old Mortar, Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in cement mortar 1:6, complete all as specified and as directed.

M&L for damp proof course to horizontal or vertical surfaces 25 mm thick including necessary formwork in cement concrete 1:2:4, type B0 using 12.5 mm graded aggregates complete all as specified and directed.

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished surfaces complete all as specified and as directed.

M&L Formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished surfaces complete all as specified and as directed.

M&L for formwork to sides and soffits of floor or roof beam, rough finished of flat concrete surface including supports, overhangs etc complete all as specified and as directed.

M&L for formwork to flat rough finished surfaces of concrete suspended slab not exc 200mm thick horizontal or sloping all as specified and directed.

S&F Pressed Steel Frame of size 105x60mm using 1.25mm thick Mild Steel Sheets for Doors with One or More Rebates including necessary Fixing Lugs, Hinges, Lock Strike Plate, etc, including making good to disturbed surfaces complete all as specified and as directed.

M&L Cement Concrete 1:3:6 type B1 (20mm graded stone aggregate) as in Filling Back side of Pressed Steel Frame, complete all as specified and as directed.

S&F Flush Door Shutter 35mm thick, Solid Core Construction with Block Board core and Plywood face Panels commercial type on both side with Decorative face Veneer with Lipping/Frame to match and fitted to Steel Frame, complete all as specified and as directed.

S&F Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkhats complete all as specified and directed.

M&L for 35mm thick well seasoned 2nd class hard wood panelled shutter as per IS-1003 (Pt-I) any number of panels with panels commercial of veneered faced particle board, 12mm thick or 9-12 mm thick commercial ply wood BWP grade fitted to chow hats complete all as specified and directed.

S&F Solid PVC Door Frame of Wood grain of size 50x47mm made out of 5.0mm Plain Colour (Ivory shade) PVC Sheet Reinforced with Mild Steel Square Tube and fixing in Opening, complete all as specified and as directed.

S&F Factory Made Solid Panel PVC Door Shutter 28-30mm thick (Style) with wood free EPS, Plain colour (Ivory shade) consisting of Frame made out of Mild Steel Tubes for Top and Bottom Rails, Mild Steel Frame shall be covered with heat moulded wood grain PVC ‘C’ Channel having a PVC Sheet Strip of 20mm width stuck inside with Solvent Cement for Stiles and Wood Grain PVC Sheets for Top Rail, Lock Rail & Bottom Rail on either side and as gap insert for Top Rail & Bottom Rail, Panelling of Wood grain PVC Sheet to be fitted in the Mild Steel Frame welded/sealed to the Stiles and Rails with suitable 5mm thick x 15mm wide PVC Sheet Beading used inside Stiles and Rails and decorative PVC Beading of 10mm x 10mm (90°) and jointed together with Solvent Cement and fixing in the Frame at Site, complete all as specified and as directed.

M&L Steel Window Box type factory made using ERW 'P' Section comprising Double Frame for Gauged and Glazed Skeleton Shutter jointed internally with Flat Iron 40x3mm complete including Mild Steel Tower Bolts, Hinges, Handle, Stops, Lugs including GI Steel Wire Cloth, Glazing, etc. all as directed. Outer Section of Frame should be 50x25mm and Inner Section should be 40x20mm, complete all as specified and as directed. NOTE :- (a) For the purpose of Measurement & Payment Double Shutter with Frame shall be considered as One Unit. (b) Cost of Iron Mongery as ordered/required at Site, GI Steel Wire Cloth will deem to be included in the Quoted Unit Rate. (c) Guard Bars are included in the Quoted Unit Rate. Spacing of 10mm Square Bar will be 10 Cm Centre to Centre. (d) Glazing shall be Measured and Paid separately under appropriate Item.

S&F Anodised aluminium sliding type (2 track) window frame with shutters, aluminium sections weighing not less than 0.851 kg/m for shutter and 1.798Kg/m for frame of jindal or equivalent, including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as locking arrangement, wheel for shutter, handle as required including taking down plaster/cutting the concrete surfaces to fix the chowkhat properly and making good the disturbed concrete surfaces in cement mortar 1:4 complete all as specified and as direced by Engr-in-charge.

S&F Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as directed by Engineer in Charge.

S&F Anodised Powder Coated (minimum thickness of Powder Coating is 50 micron) Aluminium Frame for Doors, Windows, Ventilators with one or more Rebates including Jointing Cleat for fixing, incl taking down existing frame etc. complete all as specified and as directed. NOTE :- (a) The rates include for provision of PVC protected sheeting and its removal after fixing the frame work. (b) Hinges, shutters and lugs shall be measured and paid for separately.

S&F aluminium powder coated (minimum thickness of Powder Coating is 50 micron) door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified.

S&F Anodised powder coated aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

S&F Butt hinges of size 100mm, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed.

S&F Aluminium Handle 125mm long (weight not less than 120 Gram), Extruded Section, Fabricated type, anodised, complete all as specified and as directed.

S&F Aluminium Handle 150mm long (weight not less than 120 Gram), Extruded Section, Fabricated type, anodised, complete all as specified and as directed.

S&F in repair Aluminium Handle 150mm long (weight not less than 120 Gram), Extruded Section, Fabricated type, anodised, complete all as specified and as directed.

S& F 100mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S& F 200mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S&F in repair Aluminium Barrel Tower Bolt 200mm long (weight not less than 210 Gram), Extruded Section, complete all as specified and as directed.

S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

S&F 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

S&F in repair Double Action Floor Spring Hydraulically Regulated made up of minimum 1.25mm thick Aluminium alloy Sheet Foundation Box, Main Body with Stainless Steel Cover, Governing Pivot made of Brass, Other Parts made of Mild Steel heavy duty, complete all as specified and as directed.

S&F Stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or steel wire staples complete all as specified and as directed.

S&F in repair Stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or steel wire staples complete all as specified and as directed.

S&F 12mm thick laminated coloured PVC board 12mm as in panelling complete all as specified and as directed.

S&F Sheet Glass 4.0mm thick, Ordinary quality and glazing in window Pane, complete all as specified and as directed.

S&F Sheet Glass 4.0mm thick, Ordinary quality and glazing with Oil Putty in Square exc. 0.50 Sqm in Each Pane of Windows, complete all as specified and as directed.

S&F frosted Sheet glass 4mm thick, ordinary quality and glazing in square n exc 0.5 sq. m in each pane complete all as specified and as directed.

S&F frosted Sheet glass 4.8mm thick, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed.

S&F in repair for mild steel, chromium plated Curtain Rod 25mm dia (as approved) , complete all as specified and as directed.

S&F in repair for mild steel, chromium plated Side Dome and to be fitted/tightened for Curtain Rod 25mm dia with Screws, complete all as specified and as directed.

S&F in repair for mild steel, chromium plated Bracket (Shaped), for holding for mild steel, chromium plated Curtain Rod 25mm dia , complete all as specified and as directed.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and as directed.

-ditto- but 6 to 8 mm dia TMT bars

M&L for Mild steel bars 5 mm dia and over up to and including 10 mm dia in stirrups, spacers and binders, cut to length, bent to shape required and binding with and including mild steel wire (annealed) not less than 0.9 mm dia for TMT bars complete all as specified and as directed.

M&L for steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 complete all as specified and directed. (NOTE: Quoted rates shall be deemed to include for cutting to dead length where required, notching, drilling, fitting, riveting and/or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing and fitting angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing complete)

S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment all as specified rolled mild steel in stairs (framed) including stringers, treads landing, balusters, hand rails etc including cleats, brackets etc complete all as specified and as directed.

M&L for Mild steel bolts. purpose made with hexagonal or square head one end and screwed the other, or screwed both ends; exc 12mm dia but n. exc. 20mm dia each screwed end to be fitted with washers and one hexagonal or square nut. exc 30cm long, complete all as specified and as directed.

S&F 0.50 mm thick TCT (total coated thickness) pre-coloured (in camouflage pattern) galvalume sheets with minimum base metal thickness of 0.45 mm, single skin high rib/multi rib profile galvalume sheeting having 1000-1020 mm width and 28-30 mm high crest @ maximum 250-255 mm pitch (centre) with sheets manufactured out of 0.50 mm this TCT (total coated thickness) high tensile galvalume sheets having tensile strength 550 MPA with 18-20 micron top coat over 5 micron primer and 8-10 micron alkyld backer zinc aluminium alloy AZ-150, sheets having a dip metallic zinc (43.5%0 aluminium (55%) & silicon (1.5%) with total mass coating of 150 gms/sqm on both sides, having wide pans with minimum 3 small stiffening ribs for effective water shedding and special male/female ends with full return legs on laps for purlin support and fixed as per existing profile of roof complete all as specified and directed.

M&L 10 mm thick screed bed in cement mortar 1:3 over roof mixed with water proofing compound as per manufacturer's instruction complete all as specified and directed. (NOTE: WPC will be measured and paid separately)

M&L for water proofing treatment on existing cleaned RCC roof with the following specifications and manufacturer's instruction complete all as specified and directed :- (i) Preparing and cleaning of fully dried surfaces as per IS 3067-1966. (ii) Applying oil/solvent based bitumen primer conforming to IS:3384-1968 over the cleaned base @ 0.50 litre per sqm. (iii) Providing a layer of 3 mm thick APP modified pre-fabricated five layer, weight not less than 3.6 kg/sqm, black finished reinforced with non-woven polyester matt membrane with butane torch application. Overlap shall be minimum 100 mm on the transverse direction and 75 mm on longitudinal direction. (iv) Applying a coat of blown type bitumen of grade 85/25 heated to a working temperature of 180 degree C and applied @ 1.20 Kg per square metre of the surface area. (v) Sealing of all angles & abutments upstands with extra care to ensure perfect bondage. Sealing of edges well into grooves & protect the seal with a polysulphide/polyurethane sealant.

S&F in repairs Non-asbestos Fiber Cement Building Boards, 6.0mm thick, fixed to Walls with Rawl Plugs and Steel Screws and applying a coat of 2 mm thick putty for smooth finish and removal of debris from site complete all as specified and as directed.

Supply and laying polythene film, 150 micron in floors with necessary lapping complete all as specified and directed.

M&L, Cement concrete, 100mm thick, type D- 2, 1:4:8 (40mm graded aggregate) in sub floors, sub bases, pavings etc., complete all as specified and as directed.

M&L Cement Concrete 1:2:4 type B2 (40mm Graded Stone Aggregate) 100mm thick in Sub-bases, complete all as specified and as directed.

M&L for PCC 25mm thick 1:2:4 type B1 using 20mm graded stone aggregate as in base of floors etc complete all as specified and directed.

S&F non-skid ceramic coloured tiles (square/ rectangular), minimum 7mm thick, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as per approved design, set and jointed in neat cement slurry in floors and pointed in white or coloured cement to match the shade of tiles, laid over and including screed bed 15mm thick in cement mortar 1:4 complete all as specified and directed. NOTE : Cost of Cement Screed Bed shall deem to be include in the Quoted Unit Rate.

M&L Glazed ceramic coloured tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the Tiles, laid over and including 10mm thick Screed as backing coat in Cement Mortar 1:4, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed shall deem to be include in the Quoted Unit Rate.

-ditto- but glazed tiles without screed bed

M&L for Floor (paver) tiles 400x400x9.0 to 10mm, highly abrasive, anti-skid, impact resistance, laid over and including 15mm thick screed bed in cement mortar 1:6, complete all as specified and as directed. (Note : Cost of Cement screed bed shall deem to be included in the Quoted Unit Rate)

M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like including screed bed 15mm thick in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and moulding of edges complete all as specified and directed.

M&L Cement Concrete 1:3:6 (40mm Graded Stone Aggregate) 75mm thick in plinth protection finishing cement concrete surfaces even and fair, complete all as specified and as directed.

M&L 100 mm thick PCC (1:2:4) type B-1, using 20mm graded aggregate as in floors, path/Hard standing, finishing cement concrete surfaces even and smooth without using extra cement, complete all as specified and as directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade, with grey cement & no pigment complete all as specified. (NOTE: sand cushioning shall be measured and paid separately)

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade, with grey cement & no pigment, incl taking out existing unserviceable paver block and removing debris from outside MD land, complete all as specified. (NOTE: sand cushioning shall be measured and paid separately)

M&L, Sand filling under floors or in foundations including watering and consolidation, complete all as specified and as directed.

M&L Providing, cement concrete, Type B1 1:2:4 ( using 20mm graded aggregate) rounded or chamfered on edges in plinth courses, copings, and the like including weathering, slightly rounded or chamfered angles and throating, as directed d.

M&L Machine Cut Kota Stone Slab 20-25mm thick in Flooring over and including Cement Screed 20mm thick in Cement Mortar 1:6, laid and jointed with Grey Cement Slurry mixed with Pigment to match the Shade of the Slab including Rubbing and Polishing, complete all as specified and as directed. NOTE : Cost of Cement Screed Bed will deem to be included in the Quoted Unit Rate.

M & L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like including screed bed 15mm thick in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

M&L for rendering 12mm thick in cement mortar 1:6 on fair faces of brick work, plastered surfaces finished even and smooth without using Extra Cement, complete all as specified and as directed.

M&L Rendering 15mm thick in Cement Mortar 1:6 on Brick Walls/Concrete Surfaces, plastered surfaces finished even and smooth without using Extra Cement, complete all as specified and as directed.

M&L for rendering 10mm thick in cement mortar 1:4 on concrete surfaces and surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for Rendering (Ceiling) 5.0mm thick in Cement Mortar 1:3 on Concrete Surfaces as in Ceiling, etc., Plastered Surfaces finished Even and Smooth, without using Extra Cement, complete all as specified and as directed.

M&L for 15 mm thick plastering in two layers, 10 mm + 5 mm in cement mortar 1:4, top layer of 5 mm thickness mixed with water proofing compound (as per manufacturer's instructions) on brick/stone walls or concrete surfaces finished even and fair (up to any height) for external surfaces complete all as specified and directed. Note : Water Proofing compound shall be measured and paid separately as "Supply only".

Supply only Liquid water proofing compound complete all as specified and as directed.

M&L Rough Cast Plaster on Brick Walls consisting Under Coat of Cement and Sand Mortar 1:3 not less than 10mm thick and while it is still in Plastic state the Rough Cast Mixture consisting of Crushed Stone or Fine Gravel mixed with Coarse Sand and Cement in the ratio 1:1:1 shall be applied and finish Even, complete all as specified and as directed.

M&L preparing New Plastered Surfaces of Walls by applying Two Coats of Weatherproof exterior emulsion Paint with approved Tint over a coat of Primer (as per Manufacturer's instructions), in any pattern complete all as specified and as directed.

M&L preparing New Rough Cast Plastered Surfaces of Walls by applying Two Coats of Weatherproof exterior emulsion paint with approved Tint as per manufacturer's instructions over a coat of primer, in any pattern complete all as specified and as directed.

M&L for preparation of new wooden Surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M & L for preparing newly plastered surfaces of ceiling and applying two coats of acrylic distemper over a coat of primer complete all as specified and as directed.

M&L for complete removal of existing treatment and applying Two Coats of Weatherproof Exterior Emuslion Paint with approved Tint over a coat of Primer (as per Manufacturer's instructions), in any pattern complete all as specified and as directed.

M&L for complete removal of existing treatment and applying Two Coats of Weatherproof Exterior Emuslion Paint with approved Tint as per manufacturer's instructions over a coat of primer, in any pattern complete all as specified and as directed.

M&L for preparing new Plastered surfaces of Walls applying white cement based wall putty on the surfaces with minimum 2 mm uniform thickness and making surface absolutely smooth and applying two coats of acrylic distemper on wall surface complete all as specified and directed .

M&L for complete removal of existing treatment and applying two coats of acrylic distemper over a coat of primer complete all as specified and directed .

M&L for Preparing Newly Plastered Surfaces of Ceiling and applying Three Coats of White Wash, complete all as specified and as directed.

M&L for Preparing old Plastered Surfaces of Ceiling and applying one coat of White Wash, complete all as specified and as directed.

M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide and over 10cm in width or girth, complete all as specified and as directed

M&L preparing old painted Steel and Iron Surfaces of any description, over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality) , complete all as specified and as directed.

M&L preparing old painted wood or wood based surfaces of any description, over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality), complete all as specified and as directed.

S&F vitreous china floor mounted one piece closet (Pedestal pattern), white including vitreous china valveless syphonic action type flushing cistern with inlet ball valve float, push button, flush pipe incl bracket, P/S trap, PVC soft close seat cover and connecting fittings complete all as specified and directed.

S&F vitreous china, white, counter top wash hand basin, minium size 600 x 350 mm including providing 32 mm dia chromium plated waste coupling and making all necessary connections complete all as specified and directed.

S&F Brass chromium plated bottle traps for wash basins with inlet and outlet including necessary packing, union and cap and fixed 32mm dia complete all as specified and as directed.

S&F Bib Tap 15mm bore (dia), Cast Copper alloy, Chromium Plated, Fancy type, Long Body with Capstan Head, screwed down, screwed for Iron Pipe or for Brass Ferrule, complete all as specified and as directed.

S&F in repair Bib Tap 15mm bore (dia), Cast Copper alloy, Chromium Plated, Fancy type, Long Body with Capstan Head, screwed down, screwed for Iron Pipe or for Brass Ferrule, complete all as specified and as directed.

S&F Chromium Plated health faucet with 1mtr stainless steel tube including necessary fitting and fixtures complete all as specified and as directed by Engr-in-charge.

S&F Brass CP basin mixer for mixing hot & cold water screwed down for iron pipe and fixed 15mm bore complete all as specified and directed.

S&F in repair 15mm bore Brass CP basin mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed.

S&F 15mm bore angle stop valve of cast copper alloy, chromium plated high pressure screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair Angle Valve 15mm bore (dia), Cast Copper alloy, Chromium Plated, screwed down, high pressure, screwed both Ends for Iron Pipe and Fixed-in-repairs, complete all as specified and as directed.

S&F Looking Mirror 5.0mm thick of size 600x600mm, fixed with Chromium Plated Brass Spacers 25mm to 30mm in size (One Each Corner) including rounding the edges of the Mirror and Fixed complete all as specified and as directed.

S&F in repair Looking Mirror 5.0mm thick of size 600x600mm, fixed with Chromium Plated Brass Spacers 25mm to 30mm in size (One Each Corner) including rounding the edges of the Mirror and Fixed-in-repairs, complete all as specified and as directed.

S&F 32mm bore low density polyethylene pipes (LDPE) pressure rating 6 kg/ cm2 of fixed complete to walls, ceiling or laid in floors all as specified and directed.

S&F PVC connection 15mm bore length not less than 450 mm long with both ends PTMT nuts complete all as specified and directed.

S&F in repair PVC Connection Pipe 15mm size and 60 Cm in length with Adopter Nuts of PVC and Fixed-in-repairs, complete all as specified and as directed.

S&F jointing and testing galvanized iron tube 15 mm dia medium grade with all fittings such as bends, elbows , socket, reducer and fixed to wall, ceiling or laid in floors complete all as specified and directed.

S&F jointing and testing galvanized iron tube 20 mm dia medium grade with all fittings such as bends, elbows , socket, reducer and fixed to wall, ceiling or laid in floors complete all as specified and directed.

Refixing Old Steel Tubing 15mm bore (dia) and Connections (Serviceable Pipes and Connections obtained from Item here-in-before) in new or old position (Walls, Ceiling, Floors, etc.) including cleaning both inner and outer surfaces of Pipes by using Wire Brush including provision of new GI Connections (as required ordered at Sites), complete all as specified and as directed.

Refixing Old Steel Tubing 20mm bore (dia) and Connections (Serviceable Pipes and Connections obtained from Item No. 15 here-in-before) in new or old position (Walls, Ceiling, Floors, etc.) including cleaning both inner and outer surfaces of Pipes by using Wire Brush including provision of new GI Connections (as required ordered at Sites), complete all as specified and as directed.

S&F 15 mm dia gun metal globe or gate valves , with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S&F 20 mm dia gun metal globe or gate valves , with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S&F in repair Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 20mm bore dia, complete all as specified and as directed.

S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required complete all as specified and as directed.

S&F Rotational Moulded Polyethene Water Storage Tank, 500 Litre Capacity, Cylindrical, Vertical with Closed Top, 3 layered, conforming to IS, hoisted and fixed in Position complete all as specified and as directed.

S&F in repair Rotational Moulded Polyethene Water Storage Tank, 500 Litre Capacity, Cylindrical, Vertical with Closed Top, 3 layered, conforming to IS, hoisted and fixed in Position complete all as specified and as directed.

S&F in repair Rotational Moulded Polyethene Water Storage Tank, 1000 Litre Capacity, Cylindrical, Vertical with Closed Top, 3 layered, conforming to IS, hoisted and fixed in Position complete all as specified and as directed.

S&F 20mm ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (min wt. 210gms) complete all as specified and as directed.

S&F in repair Ball brass valves, high pressure, with polythene float and fly nut complete for 20mm dia bore pipe , screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

S&F Brass Chromium Plated Tubular Towel Rail 20mm dia ‘D’ type 60 Cm long with Brackets, complete all as specified and as directed.

S&F in repairs Brass Chromium Plated Tubular Towel Rail 20mm dia ‘D’ type 60 Cm long with Brackets, complete all as specified and as directed.

S&F in repair stainless steel Grating Round 100mm dia with waste hole jointing with Solvent Cement and Fixed-in-repairs, complete all as specified and as directed.

S&F Vitreous China White Squatting Pan of size 580x440mm, Orissa Pattern with Integral Foot Rests, ‘P’ or ‘S’ Trap, providing Joints between Flush Pipe and Socket of WC Pan, Cones, India Rubber (nozzles of WC Pan) including provision of Lime Concrete Bedding and Making Good to Floor/disturbed surfaces and Fixed-in-repairs, complete all as specified and as directed.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white, with 'P' or 'S' trap front or back inlet, fixing bolts (except flushing cistern and flush pipe) incl plastic water closet seat cover (white) and mild steel chromium plated or aluminium hinging device complete all as specified and directed.

S&F in repair PVC Flushing Cistern 10 Litre capacity White, Low Level, Valve less, Syphonic action type with Inlet, Ball Valve, Float and Handle, PVC Waste Pipe 32mm bore (dia) of suitable Length, a pair of Cast Iron Bracket/ Erecting Stand duly painted including cutting and pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 and Fixed-in-repairs, complete all as specified and as directed.

S&F in repair Vitreous China wash basin, white, flat back, size 550x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and directed.

S&F 75 mm dia PVC (SWR) floor trap plain with grating incl jointing with solvent cement complete all as specified and directed.

S&F in repair 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F PVC (SWR) pipes of 75 mm bore single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S&F in repair 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F PVC (SWR) pipes of 75 mm bore single socketed in any length with rubber ring joints fixed to wall all as specified

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches complete all as specified and directed.

S&F in repair 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F PVC (SWR) bends any radius 75 mm dia complete all as specified and as directed.

S&F in repair PVC (SWR) bends any 75mm bore complete all as specified and as directed

S&F PVC (SWR) bends110 mm bore complete all as specified and as directed.

S&F in repair PVC (SWR) bends any 110mm bore complete all as specified and as directed

S&F PVC (SWR) bends any radius 75 mm dia with access door complete all as specified and as directed.

S&F 110mm bore.PVC (SWR) junction single (single T) equal or unequal with access door complete all as specified and as directed.

S&F 110 mm dia PVC (SWR) vent cowl complete all as specified and as directed.

M&L Reinforced Concrete Pipes 150mm (internal dia), Class NP-3, laid in Trenches on Concrete Bed, to required Slope, jointed complete with Collars and tested, complete all as specified and as directed.

M&L Cement Concrete 1:3:6 (40mm graded stone aggregate) as in Concrete Bed to Drain Pipes of 150mm bore (dia), including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed.

SCHEDULE 'A' PART-II (E/M WORKS) Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

Taking down/out unserviceable Wires only from the existing Sub-main Wiring of any type and any description, without disturbing Existing Conduit, complete all as specified and as directed.

M&L Point Wiring with 1.5 Sqmm (nominal area) 1100 Volt PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable with 1.5 Sqmm (nominal area) 1100 Volt PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuity Wire, drawn through and including Rigid Non-metallic PVC Conduit 25mm in size, medium grade, ISI marked and its Accessories in Concealed (Partly)/ Surface (Partly) with necessary grouting of required size and depth on Wall and Making Good in Cement Mortar 1:3, providing Sunk GI Terminal Box (1.6mm thick) of suitable size (as required) for mounting Switches, Sockets, Fan Regulators, etc. Earth Continuity Wire connected to Common Earth dolly for ONE LIGHT/FAN POINT/ BELL POINT CONTROLLED BY ONE 1-WAY SWITCH 6 AMP, complete all as specified and as directed. (NOTES :- (i) Where tube light fitting is to be fitted/ suspended, CI Circular boxes shall be provided with the PVC Pipes in the ceiling & the unit rate shall be deemed to be included for the same. (ii) Quoted rate shall be deemed to be inclusive of the cost of GI terminal box. (iii) Cost of cutting chases for concealed wiring shall be deemed to be inclusive in the quoted rates. No claim in this regard shall be entertained at a later stage)

-Ditto- as item No 172 but for ONE 5 PIN SOCKET OUTLET 6 AMP ON THE SAME BOARD, complete all as specified and as directed.

-Ditto- as item No 172 but for ONE 5 PIN SOCKET OUTLET 6 AMP ON INDEPENDENT BOARD, complete all as specified and as directed.

M&L Point Wiring with 4.0 Sqmm (nominal area) 1100 Volt PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable with 4.0 Sqmm (nominal area) 1100 Volt PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuity Cable, drawn through and including Rigid Non-metallic PVC Conduit 25mm in size, medium grade, ISI marked and its Accessories in Concealed (Partly)/ Surface (Partly) with necessary grouting of required size and depth on Wall and Making Good in Cement Mortar 1:3, providing Sunk GI Terminal Box (1.6mm thick) of suitable size for mounting Switches, Sockets, Fan Regulators, etc. Earth Continuity Cable connected to Common Earth dolly for ONE 6 PIN SOCKET 16 AMP ON INDEPENDENT BOARD, complete all as specified and as directed. (NOTES :- (i) Where tube light fitting is to be fitted/ suspended, CI Circular boxes shall be provided with the PVC Pipes in the ceiling & the unit rate shall be deemed to be included for the same. (ii) Quoted rate shall be deemed to be inclusive of the cost of terminal box & laminate cover. (iii) Cost of cutting chases for concealed wiring shall be deemed to be inclusive in the quoted rates. No claim in this regard shall be entertained at a later stage)

-Ditto- as item No 175 but with 2.5 sqmm copper wire for ONE 5/6 PIN SOCKET OUTLET 15 AMP ON INDEPENDENT BOARD, complete all as specified and as directed.

S&F Sub-main Wiring with 2-Runs of 10.0 Sqmm (nominal area) 1100 Volt, PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable and 1-Run of 10.0 Sqmm (nominal area) 1100 Volt, PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuty Cable along with the Wiring drawn in and including non-metallic rigid PVC CONDUIT concealed in wall of suitable size complete all as specified and as directed. NOTES: (i) Three runs of 10 sqmm wire and one run of PVC conduit shall be measured as one unit. (ii) Cost of cutting chases for concealed wiring and making good shall be deemed to be inclusive in the quoted rates. No claim in this regard shall be entertained at a later stage)

S&F Modular Switch 1 way 6 A, 1 module complete all as specified and as directed.

S&F Modular Switch 1 way 16 A, 1 module complete all as specified and as directed.

S&F Modular Socket 6 A, 2/3 pin combined 2 module complete all as specified and as directed.

S&F Modular Socket 6 A/ 16 A, 2/3 pin combined 2 module complete all as specified and as directed.

S&F Modular Fan step regulator, 120 watt, 2 module complete all as specified and as directed.

S&F Modular Blank plate, 1 module complete all as specified and as directed.

S&F Modular type White cover plate with frame 2 module

S&F Modular type White cover plate with frame 3 module

S&F Modular type White cover plate with frame 4 module

S&F Modular type White cover plate with frame 6 module

S&F new Ceiling rose, surface type, three terminals complete all as specified and directed

S&F lamp holder with back plate suitable for batten fittings or to be mounted on walls complete all as specified and directed

S&F surface mounted LED luminaire, 1 X 20 Watt in aluminium housing, 110 lumen/watt, operating voltage 180-270 V, with acrylic/polycarbonate difuser & integrated constant current electronic driver complete with all other accessories internally prewired and including connecting up with three core flexible copper wire of suitable size complete all as specified and directed.

-ditto- as per Item No. 190 but of 1 X 05 Watt capacity in polycarbonate housing with lumen output not less than 105 lumen per watt

S&F LED Bulkhead fitting 09/10 watt, with IP65 degree of protection and with impact resistance of IK-08, mounted on wall /ceiling connected with insulated unsheathed flexible copper wire of suitable size complete all as specified and directed.

S&F surface mounted slim-fit downlighter, 100 lumen/watt, round or square, having glare free frosted diffuser, operating voltage 180-270V, with constant current electronic driver complete with all accessories with and including 12 Watt LED and including all accessories, mounting frame etc and connecting up with three core flexible copper conductor wire of adequate size complete all as specified and directed.

S&F in repair Double Door, Sheet Metal Enclosure for DBs for mounting of MCB for 240 Volts, 8 way, with 100 Amps rated copper bus bar, Single Pole & Neutral, complete all as specified and directed. NOTE: MCB shall be measured and paid seperately.

S&F in repair Double Door, Sheet Metal Enclosure for DBs for mounting of MCB for 240 Volts, 4 way, with 100 Amps rated copper bus bar, Single Pole & Neutral, complete all as specified and directed. NOTE: MCB shall be measured and paid seperately.

S&F MCB, 'C' series, SPN, 40 Amps, breaking capacity 10KA complete all as specified and directed.

S&F MCB, 'C' series, single pole, 6 to 32 Amps, breaking capacity 10KA complete all as specified and directed.

S&F in repair Sheet Metal Enclosure, Single Pole with a 2-Pin and Earth Plug and Socket with and including 1 No. MCB Single Pole, 32 Amp, 240 Volt and Connecting up complete all as specified and as directed. (NOTE: Quoted rate shall be deemed to be inclusive of the cost of MCB)

Supply, installation, testing and commissioning of heater water storage type electric geyser (vertical cylindrical type) 25 litres capacity with BEE 5 star rating (min) and ABS body, glass lined/titanium enamel coated inner tank incl fixing arrangement, clamps, nuts & bolts etc alng with providing suitable capacity flexible cable 3 core with 3 pin plug of 16 amps and stainless steel connection pipes of adequate length for hot and cold water including dismantling of existing unserviceable geyser and depositing in MES store complete all as specified and directed. (Make: RACOLD, Model - CDR DLX / AO SMITH, Model- HSE-VAS / Havells, Model: Monza Dx / BAJAJ, Model: CALDIA)

S&F in repairs LED Street Light fitting, 50 watt, in high pressure die cast aluminium housing with prismatic polycarbonate modular secondary lens optics with integrated constant current electronic driver, top opening driver cover, IP66 ingress protection, impact resistance of IK07 complete all as specified and directed and complying with the following specifications:-. (a) minimum system efficacy 120 lumen/watt (b) CRI not less than 70, (c) THD < 10% (d) Power Factor not less than 0.90 (e) having in built short circuit and surge protection upto 4 kV (f) having 10 KV external surge protection (for 45 watt & above) (g) colour temperature not less than 5700 degree K (h) life not less than 50000 hours of operation (NOTE: After dismantling, all luminaries shall be inspected & tested for unserviceability justifying replacement of luminaire)

S&F in repairs LED Flood Light fitting, 100 watt, in high pressure die cast aluminium housing with prismatic polycarbonate modular secondary lens optics with integrated constant current electronic driver and toughened glass cover, IP66 grade ingress protection, impact resistance IK07 complete all as specified and directed and complying with the following specifications:-. (a) minimum system efficacy 120 lumen/watt (b) CRI not less than 70, (c) THD < 10% (d) Power factor not less than 0.90 (e) having in built short circuit and surge protection upto 4 kV (f) having 10 KV external surge protection (g) colour temperature not less than 5700 degree K (h) life not less than 50000 hours of operation (NOTE: After dismantling, all luminaries shall be inspected & tested for unserviceability justifying replacement of luminaire)

M&L for making swivel/revolving for security light fitting with dual type rotary system including 40 mm dia GI pipe (medium grade) for base and 25 mm dia GI pipe (medium grade) for main rotary arrangement including handle, rotatable type and easily accessible from inside the buildings, having mechanical revolving system upto 360 degress which can be easily manually operated from the tower including all type of fabrication, welding and PCC/cementing work, fixed on watch towers alongwith necessary electrical connections with and including 2 way sheet steel MCB enclosure and one 32 Amps SP MCB complete all as specified and directed. NOTES: (1) Security lights and wiring shall be measured and paid seperately. (2) Contractor shall make himself clear about the design and fabrication requirement of the security light swivel system from Engineer-in-Charge before quoting his rates. No claim in this regard shall be entertained during currency of work.

Taking down existing/serviceable fans, sealing cable end, dismantling blades and removing fan and blades and painting of ceiling fans complete, in situ with one coat of synthetic enamel paint by spraying including filing cavities with filler after proper cleaning of all dust, oil, grease etc and re-fixing the ceiling fan by hanging and necessary electrical connections from ceiling rose including testing and commissioning complete all as specified and directed. NOTE: Quoted rate shall be deemed to be inclusive of minor spares sucjh as nuts & bolts, rubber reel, spilt pin, wires etc if required for proper installion and operation of the fans.

Taking down existing unserviceable fans, sealing cable end, dismantling blades and removing fan and blades to MES Store, collect serviceable fans from MES store and fixing the ceiling fans at required locations by hanging and necessary electrical connections from ceiling rose including testing and commissioning complete all as specified and directed. NOTE: Quoted rate shall be deemed to be inclusive of minor spares sucjh as nuts & bolts, rubber reel, spilt pin, wires etc if required for proper installion and operation of the fans.

M&L for earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6.0 mm thick buried directly in ground vertically to a depth not less than 2.25 meter deep below ground level with top edge earth plate at a depth not less than 1.5M below normal ground level connected to galvanized steel earth wire 4 mm dia (upto 7.5 metres) by means of bolts, nuts check nuts and washers of galvanized steel and connected to main switch board or main control board as directed and including provision of concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 45 cm x 45 cm x 5 cm reinforced with 8 mm dia. TMT bars @ 150 mm centre to centre both ways, with one handle for lifting made out of 8 mm dia MS bar, provision of funnel, wire mesh, 20 mm bore galvanized steel tubing (Medium grade) for watering, charcoal or coke and salt in alternate layers, 40 mm bore galvanized steel tubing medium grade for protection of earth lead connection, necessary excavation and earth work in any type of soil and including necessary testing and dismantling of existing unsv earthing complete all as shown in Figure 15A of IS 3043 :1987, complete all as specified and directed.

S&F ventilating fan 250 mm sweep, and connecting up including provision of PVC insulated, sheathed round flexible wire with multi stranded copper conductor of size 0.50 Sq mm, 3 core, 1100 Volts grade, from ceiling rose to fan complete all as specified and directed. (MAKE : HAVELLS, Model : Venti Air DX / CROMPTON, Model : Brisk Air / HALONIX, Model: HELION DX / USHA, Model: CRISP AIR or equivalent model in BAJAJ / ORIENT)

Supply, Laying and testing XLPE insulated, screened PVC bedded, galvanised steel strip or wire armoured electric power cable, 16 sqmm 2 core, 1100 Volts grade with stranded aluminium conductor cable, laid in trench or fixed to wall/passing through pipe/pole incl necessary aluminium thimbles, jointing and testing complete all as specified and directed. Note :- Necessary earth work to be measured and paid separately.

M&L for cutting/boring holes beneath roads, hardstanding, pavement etc using trenchless technology, manully or by using boring machines for inserting and including 50 mm bore GI pipe (light grade) complete all as specified and directed. Note :- Quoted rate shall be deemed to be inclusive of the cost of GI pipe.

Supply and laying brick covering with width equal to length of brick as mechanical protection to cable using sub class ‘B’ bricks laid flat, size 230mm x 115mm x 75mm, all as directed

M & L for sand cushioning to underground cable, provided with a layer 8 cm before and 15 cm after laying and stretching jointing and testing the cable all as specified and directed. (Note: Punned thickness of sand shall be measured)

M/s Satguru Traders

YESH BUILDERS

STAR CONSTRUCTIONS

M/s Har Nandi Construction Company