SPECIAL REPAIR TO BUILDING NO D-05 AT DALAPCHAND UNDER GE 867 EWS

Amount

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings all as specified and directed.

S & F pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed.

S & F pre painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.

S&F 1.25mm thick Mild steel sheet eaves gutters, 150mm dia, galvanised class 3, half round with rounded edges complete all as specified and directed.

S&F 150mm dia Mild steel sheet of 1.25mm thick drop ends (for spigot or socket ends) or nozzles complete all as specified and directed.

S&F 150mm dia Mild steel sheet of 1.25mm thick stop ends (for spigot or socket ends) or nozzles complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F mild steel work as in band, strap, supports or stay for rainwater, ventilating pipes incl bolts if reqd, hoocks and similar small articles conforming to Fe 290 Gde -E-165 complete all as specified and directed.

S&F roof trusses, framed trussed, purlins, crane gantries, rails and fastening and heavy brackets framing (Beam, tee, angle channel or flat section) incl distance pieces, cleats, nut and bolts conforming to FE-410w (grade 250-E quality A) complete all as specified and directed.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

Demolition of precast concrete block walling built in cement mortor complete all as specified and directed.

M & L precast cement concrete type C-1 , (1:3:6) (using 20mm graded stone aggt) block masonry with solid blocks exc 10cm in width and setting in CM (1:6) complete all as specified and directed.

Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided all as specified and directed.

M & L RCC, (nominal mix) type B-1, (1:2:4) (20mm graded stone aggt) in lintels bands, cills and similar works all as specified and directed by Engineer-in-charge.

Formwork to sides and soffits of lintels, shelves including suppotrts, beams etc in rough finished and flat surfaces of concrete complete all as specified and directed.

M & L mild steel TMT Bars10mm dia and over cut to length bend to shape required including cranking bending spirally for column, hooking ends & binding with and including mild steel mild steel wire (ann ealed not less that 0.90 mm dia or securing with chip) complete all as specified and directed by Engineer-in-charge.

M & L mild steel TMT Bars 5mm dia and over upto and incl 10mm dia in stirrups, spacer and binders cut to length bend to shape required including cranking bending spirally for column, hooking ends & binding with and including mild steel mild steel wire (annealed) not less that 0.90 mm dia or securing with chip complete all as specified and directed by Engineer-in-charge.

Taking down cement plaster on brick or stone masonry surfaces of walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:6) complete all as specified and directed.

M&L 15 mm thick rendering on fair faces of brick work or concrete surface in cement mortar (1:4) on external wall finished even and fair mixed with integral water proofing compound @ 3% by weight of cement or in the manner specified by the manufacturer and in the proportions indicated all as specified and as directed. Note:-WPC will be measured and paid separately as supply only.

Supply only integral water proofing compond all as specified and as directed.

Preparing newly plastered surfaces of wall and applying two coat of oil bound distemper over chalk whitining primer over 3mm thick layer of putty all as specified and as directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for non skid coloured ceramic tiles 7 to 8 mm thick premium quality conforming to relevant IS (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces of tile over and including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

M&L for non skid coloured ceramic tiles 7 to 8 mm thick premium quality conforming to relevant IS (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in vertical suface like, dado and skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces of tile over and including 10 mm thick rendering in cement mortar (1:3) complete all as specified and directed.

M&L Granite (of any type) work 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in including and over 20mm thick screed bed CM 1:6 and pointing in white cement (1:2) using marble dust with admisture of pigment to match with shade of granite all as specified and directed.

Rounded to edges of stone slabs one edge, such as in steps, cooking platform,and other similar work all as specified and directed.

M&L for demolition of stone slabs and tiles of any description or thickness laid bedded and pointed in any mortar in floors, aprons etc.

M&L for 75 mm thick PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate) as in sub base complete all as specified and directed.

M & L chequered cement concrete tiles 300 x 300 x 25 mm thick set, jointed and pointed in neat cement slurry in floors with grey cement and no pigments over and including 15 mm thick screed bed in CM (1:6) all as specified and as directed.

Demolition of cement concrete (un-reinforced) in ground floor and paving n.exc 15 cm thickness below or above ground level all as specified and as directed.

M&L 75 mm thick PCC type C-2, (1:3:6) (40mm graded stone aggt) as in path, plinth protection etc., complete all as specified and as directed.

M&L for PCC (1:3:6) type C-2 (using 40 mm graded crushed stone aggregate) as in surface channels, drains including all necessary form work complete all as specified and directed.

M&L extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc complete all as specified and directed.

Dismantling timber scantlings 40 Sqcm and over in section, in any position (framed work) all as specified and directed.

M&L well seasoned second class hard wood timber scantling in timber framed work; fixed in clean sawn complete all as specified.

Dismantling of wall & celling boards (fiber pulp insulation etc) or insulation boards /slabs /blankets any thickness, including cover fillets.

S&F 605 X605 mm GI frame work for for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to sorrounding wall using nylon sleeves and screws at 450 mm centre to centre /intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from suffit at approx 900 mm centre to centre with GI cleats and steel expansion fastner with and including ceiling section (not exc 1.2 m length)of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10 .5 mm fixed to the intermediate channel with connecting clieats across the intermediate channel at 457 mm centre to centre.

S&F 10mm thick PVC insulation panels with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./M.S. as per specification and drawing complete all as specified and directed.

Taking down chowkhats or frame n.exc 1.50 and each with shutter (without taking off shutters from the frame) complete all as specified and directed.

Taking down chowkhats or frame exc 1.50 and not exc 4 sqm each with shutter (without taking off shutters from the frame) complete all as specified and directed.

S&F framed work as in door or gates of angle or other section with gusswt plates, rails, braces,etc. complete drilled for fixingof steel sheeting or other covering Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete conforming to Fe-410W Gde E-250)quality- B complete all as specified and as directed.

Formwork to sides and soffits of lintels, shelves including suppotrts, beams etc in rough finished and flat surfaces of concrete complete all as specified and directed.

Supply only 375 mm long MS sliding door bolts, bolt type, stove enamelled black, with bright bolts not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

Supply only 150 mm size MS Pressed handle, oval type, stove enamelled black and fixed complete all as specified and directed.

S & F steel windows for glazed with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed by Engineer in charge.

S & F Framed work such as grills framed guard bars etc confiring to Ge 290 , 10 mm sq bar for guard bars complete all as specified and directed by Engineer in charge.

S&F steel ventilator with top hung shutter fixed type including hinges, steel peg stay, complete complete all as specified and directed.

S&F powder coated (min thickness of Powder coateing 50 micron) anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

S&F powder coated (min thickness of Powder coateing not less than 50 micron) anodised aluminium door shutters, almn section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodisied aluminum snap beading screws etc, complete all as specified.

S&F powder coated (min thickness of Powder coating not less than 50 micron) anodised aluminium window and ventilator shutters, fixed type without sash bar, almn section weighing 0.55 kg/m incuding necessary joining cleats, glazing clips, rubber packing, anodisied aluminum snap beading, screws etc, complete all as specified.

S & F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc 0.50 Sqm in each pane complete all as specified and directed.

S & F 4.8 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.50 Sqm in each pane complete all as specified and directed.

S&F Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed.

S&F 4 levers mild steel Mortice lock, verticla type, of size 100mm with keys complete all as specified and directed.

S&F Pressed steel frames of size 165x60 mm for door with one or more rebates including necessary fixing lugs, hings, lock strike plate etc., complete all as specified and directed.

S & F 30mm thick flush door shutters , solid core construction with black board core and plywood face panels,commercial type on both face complete all as specifiedhard & fitted to chowkats complete all as specified and directed.

S & F 30 mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass gauge etc with cut and mitred beads for securing glass etc size of member of shutter as specified in SSR Pt-1 section 8 and clause 8.24 (a) complete all as specified and directed.

S&F 140mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F 200mm size aluminium anodised barrel tower bolts of extruded sections complete all as specified and directed.

S & F 150mm size aluminium handle cast type anodised complete all as specified and directed.

S & F 300 mm long aluminium alloy, anodised sliding door bolt with hasp and staple (bolt type) and fixing clip of sheet cost or extruded section or cost aluminium alloy & fixed complete all as specified and directed.

S & F galvanished mild steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanished wire staples as in any position all as specified and directed by the Engineer in Charge

S&F in repairs brass hat and coat hooks, solid body, 175mm to 250mm complete all as specified and directed.

S&F in repairs 20mm dia curtain rails, mild steel, chromium plated with incl fixing brackets, stops, rollers etc complete all as specified and directed.

M&L prepration of old painted wooden surfaces of any description, not otherwise described, over 10cm width & applying one coat of synthetic enamel paints all as specified and directed.

M&L prepring surfaces of wood and wood based materials, new or old of any description, not otherwise described and treated with one coat of creosote oil complete all as specified and directed.

M&L prepration of old painted steel surfaces of any description, not otherwise described, over 10cm width & applying one coat of synthetic enamel paints all as specified and directed.

M&L for Preparation of new painted steel and iron surfaces of any description and in any position over 10 cm width or girth as in roof not other wise specially described and applying one coat of Ist grade enamel paint over a coate of red oxide primer zinc chrome all as specified and as directed.

M&L preparation of new wooden surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power ) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, light fitting etc and making good disturbed surfaces of wall, floors, etc all as specified and as directed by the Engineer – in - Charge.

Disconnection and taking down distribution boards, switch fuse unit, enclosure for MCB including MCBs of any type and size and keeping aside for reuse of serviceable one.

Material and labour for point wiring with 1.5 Sqmm (nominal area) PVC insulated un - sheathed single core multi stranded copper conductor FRLS cable 1100 volts grade (conforming to IS) drawn through and including rigid non metallic PVC casing capping with all necessary fittings for light/fan/bell point controlled by one switch including 1.5 Sq mm PVC insulated copper stranded conductor for earth continuity conductor and connected to earth dolly and to be terminated in 1.6 mm thick pressed steel terminal boxes for mounting fittings like switch, socket, fan regulator etc. with 3 mm thick laminated bakelite sheet cover ,for housing switches, socket outlet, regulator etc. complete all as specified or directed including testing on completion.

All as per item No 75 here – in – before but for one 3 / 5 -pin switch socket outlet 5 amps on independent board.

All as per item No 75 here – in – before but for one 3 / 5 -pin switch socket outlet 5 amps on same board.

M&L for one 3 pin socket, outlet,15 amps, independent with cables 4 sq mm size complete all as specified and as directed by Engr-in-Charge.

Supply and fix switch socket combination 2 – in – one, 5 amps flush type all as specified and as directed. Make : Anchor/Havells/Plaza

Supply and fix switch socket combination 3 Pin 16A, flush type all as specified and as directed. Make : Anchor/Havells/Plaza

Supply and fix switch piano flush button, single pole, 5 amps, one way all as specified and as directed. Make : Anchor/Havells/Plaza

Supply & Fixing ceiling rose surface bakelite 65 X 50 mm three terminal all as specified and as directed.Make : Anchor/Havells/Plaza

S & F Energy efficient LED tube light fitting 4", 1x18 watt, with bipin holders, connector block, CCT - 6500K, system output lumen not less than 1800lm, aluminium housing, surge protection range 3KV including connecting up with PVC insulated 3 core sheathed 0.5 sqmm copper conductor two numbers PVC mounting blocks for fixing of fitting complete all as specified and as directed by Engineer-in-charge. Make: Philips/Crompton/Havells.

S & F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete complete all as specified and as directed. Make: Philips/Crompton/Havells.

Supply and fixing lamp holder insulated body with back plate for batten fitting all as specified and directed.Make : Anchor/Havells/Plaza

S & F in LED lamp B-22 10 W poly carbonate body 3 Star.(Cat part No LED ADORE 10W B22 CDL 3 STAR of Havells or equivalent in Philips/Crompton.

Supply and fixing LED luminaire 600mm x 600mm 35/36watt 220V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed by Engr-in-Charge.

Supply and fixing Sheet metal enclouser Double door for MCB DBs Phosphatised Powder Painted with bus bar 200 Amps rated Single pole and neutral (SPN) link of 8 way 240 Volts AC,concealed in wall including connection with copper thimbles as required complete all as specified. Make- Legrand /Siemens / Schneider.

Supply and fix MCB, Single Pole & Neutral (SPN), 32/40 Amps, 240V, 10KA 'C' curve, 50 Hz, complete all as specified and directed by Engr-in-Charge including taking down old unserviceable MCB. Make- Legrand, Siemens, Schneider.

Supply and fix MCB single pole (SP), 10 kA of 5 Amps to 32 Amps capacity 240 Volts. conforming to IS/IEC 60898-1 2002, integrated label holder, Sliding bottom clamp, IP 20 protection all as specified and directed by Engr-in-Charge including taking down old unserviceable MCB. Make- Legrand, Siemens, Schneider.

Material and labour for sub main wiring in repair/replacement with FRLS two single core PVC insulated and unsheathed fire retardant multi stranded copper conductor cable 1100V grade IS-694 marked of 4.0 sq mm size drawn through suitable size of PVC casing caping ISI marked and conduit junction boxes, terminal boxes and accessories such as tees, bends, elbows, reducers, bell motuh tube ends fixed to the surface of wall/ceiling including one run of 4.0 sq mm PVC insulated and unsheathed FRLS multi stranded copper conductor cable or earth wire continuity conductor complete all as specified and as directed. Note:- Two runs of single core 4.0 sq mm and one run of 4.0 sq mm copper FRLS cable as earth continuity conductor and suitable size casing capping with connected accessories shall be measured as one length.

Supply and fixing test point terminal block made of gun metal or phosphorous bronze 75x75x25mm drilled and screwed including 03 Nos dia 25mm long hex head screw all as specified and as directed by Engr-in-Charge.

Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm buried directly in ground ( earth pit not less than 2.25 m deep bellow ground level ) with top edge of the plate not less than 1.5 m bellow normal ground level, connected to galvanized earth lead wire 4 mm dia. by means of galvanized iron or steel bolts , nuts , check nuts and washers, and connected to equipments as directed , including funnel with GI med grade watering pipe 20 mm bore , wire mesh , charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode , with concrete pit in PCC 1 : 3 : 6 type C-1 , 50 mm thick pre cast RCC 1 : 2 : 4 type B-1 cover slab reinforced with 8 mm dia deformed bar 15 cm C/C and suitable handle of 10 mm dia round bar ,GI medium grade pipe for earth lead protection including necessary excavation earth work in soft/loose soil and disposal of spoil to a distance n.exc. 50 m and necessary testing complete all as shown on electrical plate No. 5 of MES SSR Part-I and as directed.

Excavation in trenches/ foundation in soft/ loose soil not exc. 1.5 metre wide and n'exc. 1.50m deep for LT under ground cable/pole foundation and getting out including forming bottom surface to required level or slope, complete all as specified and directed by Engineer-in- Charge.

Returning filling including spreading leveling watering and well ramming in layers not exc 25Cm in soft/ loose soil, complete all as specified and directed.

Removing excavated material in soft/ loose soil n'exc 50M and depositing where directed at a level n'exc1.5M above the starting point, complete all as specified and directed.

M&L for sand cushioning to U/G cable in layers of 23cm thick( 8 Cm before laying the cable and 15Cm thick after laying the cable) in trenches complete all as specified and directed.[ Note :- Only Puned layers shall be measured.]

Supply and laying reinforced precast concrete cable cover, class LV, type 1, flat, size 250mmx150mmx40mm complete all as specified and directed.

Supply and Laying service cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 Sqmm 2 core as required at site complete all as specified and directed.

M & L GI tube light grade for passing through cables under the floor ,along the wall or along the pole of 25 mm bore and fixed to the poles/walls with suitable size of MS clamps and nut and botls/washers etc complete all as specified and as ditected.

S&F Air termination , single pointed aluminium rod 12mm dia 300mm long including removing unserviceable one complete all as specified and as directed by Engr-in-Charge.

S&F aluminium strip 25x3.15 mm thick saddle/mounted on porcelain insulator / laid in trench including removing unserviceable one complete all as specified and as directed.

M & L for GI tubing light grade 40 mm bore complete with all fittings like flange/clamp/nuts/GI wire & bolts etc on roof top of required lenth for fixing lightining conductors including removing unserviceable one complete all as specified and as directed.

S&F Porcelain earting GI strip insulator for Lightenig Arrester installation complete all as specified and directed.

Supply and fixing test point terminal block made of gun metal or phosphorus bronze 75 x 75 x 25mm drilled and screwed including 03 nos dia 25mm long hex head screw all as specified and directed.

SANJAY MITTAL

G K SUTHAR

MANOJ JINDAL

C. M. AGARWAL AND CO

JAYSHREE CONCERN

MS BRAHMA CONSTRUCTION