SPL REPAIR TO SECURITY WALL AT VARIOUS PLACES OF 11 GRRC QTR NO 15/3 AND 15/4 OF RAKSF AND PROVN OF TOILET BLOCK AT STN KERB SIDE PUMP (KSP) OF 44 COY ASC SUPPLY UNDER GE (WEST) LUCKNOW

Amount

M & L for Brickwork with fly ash bricks, straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete incl Demolition of brick work built in CM including all quions, arches, pillars etc complete all as specified and directed.

M & L for brick work with fly ash bricks straight or curved on plan exc 6m mean radius in half brick thick walls built in CM 1:4 complete all as specified and directed.

M & L for 15 mm thick rendering in CM 1:4 using WPC @ 2% by weight of cement on fair faces of brick wall or concrete surfaces finished fair and even incl Taking down cement plaster or cement lime plastering , any descriptuon from brick wall including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed. Note :- WPC shall be measured and paid seperatelly

Supply only Integral water proofing compound confirming to IS-2645-2003 of approved make complete all as specified and directed

M & L for 15 mm thick rendering in CM (1:6 ) on other than fair faces of brick wall or concrete surfaces finished even and smooth without using extra cement incl Taking down cement plaster or cement lime plastering , any descriptuon from brick wall including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M & L for 10 mm thick rendering in CM (1:3 ) on ceiling finished even and smooth without using extra cement incl Taking down cement plaster etc complete all as specified and directed.

M & L for non skid ceramic tiles (coloured) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6 & including dismantling of floor, hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M & L for glazed ceramic tiles (coloured) 350x250x7mm/450 x 350 x 7mm thick on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10 mm thick rendering (as screed bed) in cement & sand mortar 1:4 & including dismantling of floor, hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. .

Roughening surfaces of old concrete floor by picking, sweeping clean, washing down with water to remove dust etc including Brushing neat cement slurry with 3.0kg of cement per sqm complete all as specified and directed

M & L for double charged virified ceramic tiles 8-10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and as directed.

Ditto all as per item No-10 above but as in vertical surfaces as in dado/skirting with and including 10mm thick backing coat in CM 1:4 complete all as specified and direceted.

M&L Granite 20mm thick (of any type) work (table rubbed and polished), machine cut and as in shelves and partition in cupboards, in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, including rubbing, grinding, polishing including making sandwitch moulding to edges complete all as specified and directed.

M & L for 25mm thick granite stone slab as in cooking platform,window cill in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, including rubbing, grinding, polishing including making sandwitch moulding to edges complete all as specified and directed.

M & L for drilling through holes in granite stone for pipes etc not exc. 25 mm dia complete all as specified and directed.

M & L for RCC 1:2:4, type B1 using 20mm graded stone aggregate in RCC lintel, shelves, hold fast etc. with necessary form work incl Demolition of RCC as in lintel, shelves etc complete all as specified and directed.

M & L for Mild steel TMT bars 10mm dia and over as in reinforcement, cut to length, bent to shape required including hooking ends and binding with MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

M & L for GI tubing 15mm dia, medium grade, galvanised with all fittings fixed to wall and floor Taking down steel tubing and connections and fittings complete all as specified and directed.

M & L for GI tubing 20mm dia, medium grade, galvanised with all fittings fixed to wall and floor Taking down steel tubing and connections and fittings complete all as specified and directed.

M & L for cutting and chaseing in brick wall built in cement mortar for concealed GI tubing and making good in CM, 1:3 not exc 10cm in girth complete all as specified and directed.

S & F PVC (SWR) Pipes 110mm dia single socketed in any length with rubber ring joints , fixed to walls or in floors Taking down eaves Gutters rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc complete all as specified and direceted.

S & F 75mm PVC SWR pipes single socketed in any length with rubber ring joints, laid in trenches or in floor Taking down eaves Gutters rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc complete all as specified and directed.

S & F PVC (SWR) bends any radius 110mm dia complete all as specified and directed.

S & F PVC (SWR) single Tee equal 110mm dia complete all as specified and directed.

S & F PVC (SWR) bends any radius 75mm dia complete all as specified and directed.

S & F in repair 75mm dia PVC Floor trap incl grating fixed in floor with cement complete all as specified and directed.

Supply and fixed in repair vitreous china wash hand basin white flat back size 550x400mm including 02 Nos angle iron bracket 40x40x5mm, PTMT waste coupling and 32mm dia waste pipe of suitable lengh with socket, complete all as specified and directed.

S & F in repair vitreous china wash down water closet (pedestal pattern) pan white with “P” or “S” trap including connection to drain or outgoing pipe and to syphonage pipe complete all as specified and directed.

S & F in repair central hole wash hand basin mixer,fancy type,brass chromium plated, with reound spout with poup waste system , including plugging and fixed, suitable of 15 mm bore pipe complete all as specified and directed.

S & F in repair wall mixer L-bend type with connecting legs and wall flanges, fancy type brass chromium plated, with closted swinging spout including plugging and securing to walls suitable for 15 mm bore pipe complete all as specified and directed.

S & F in repair cast copper alloy bib taps chromium plated 15mm bore pipe with crutch or butterfly handle complete all as specified and directed.

S & F in repair Stop valve cast copper alloy with capstain head chromium plated screwed down, high pressure with long shanks and fly nuts screwed for 15mm bore pipe complete as specified and directed.

S & F in repair CP shower rose fancy type with or without swivel joints of size 125mm dia including fixing to steel pipe or union as directed.

S & F in repair CP brass soap dish fancy type of one soap fixed with screw to wall complete all as specified and directed.

S & F in repair PVC flushing cistern 10 Ltrs capacity including all fitting flush pipe etc complete all as specified and directed.

S & F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connectionS & Fixed in position complete as specified superior quality complete all as specified and directed.

S & F in repair CP Brass toilet paper holder with wall hook bracket etc, complete set of superior quality complete all as specified and directed.

S & F in repair 15mm bore PVC connection 450mm long with brass/PVC coupling and washer complete all as specified and directed.

S & F in repair CP Brass Tabular Towel Rail, 20mm dia D type 60cm long between flanges complete set of superior quality complete all as specified and directed.

S & F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 600 mm long complete all as specified and directed.

S & F glass corner shelves fancy type 6mm thick 250x250mm size and fixed over CP brass brackets complete all as specified and directed.

S & F stainless peg sets consisting 06 Nos of pegs of approved quality complete all as specified and as directed.

S & F in repair sink with drainage board size 1145x510 mm, bowl size 560x410x200 mm made of stainless steel sheet 1.00mm thick with plugs, washers and wastes pipe & coupling etc incl bedding in cement mortar to draft wall or cantilever brackets and connection union to pipe complete all as specified and directed.

S & F in repair stainless steel kitchen plate rack made out of 0.63mm thick stainless steel sheet of size 750x600 mm including screws and weight not less than 5.00 Kg complete all as specified and directed.

S & F in repair rotantional moulded polythylene water storage tanks 500 ltr capacity (cylindrical vertical with closed top ) hoisted and fixed in position all as specified in SSR part-I complete all as specified and directed.

S & F in repair rotantional moulded polythylene water storage tanks 1000 ltr capacity (cylindrical vertical with closed top ) hoisted and fixed in position all as specified in SSR part-I complete all as specified and directed.

S & F ball valves high perssure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed 20 mm bore, complete all as specified and directed.

S & F Gun-metal, globe or gate valves 20mm with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S & F Gun-metal, globe or gate valves 15mm with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) n.exc 1.50 Sqm and removing from sites complete all as specified and directed.

All as item No 50 above but exc 1.5 Sqm but n.exc 4 Sqm Each complete all as specified and directed.

Supply and Fixing Pressed steel frames size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, lock strike plate etc complete all as specified and directed.

S & F 30mm thick flush shutter, solid core construction with block board core and ply wood panels commercial type on both side complete all as specified and directed.

S & F 30mm thick second class hard wood glazed and skeleton door/window shutters, open rebated and prepared to receive glass, gauge etc (devided into panels with plain sash bars any numbers) edges of framing plain, chamfered or rounded all as specified under 8.20(a) of SSR Pt-I complete all as specified and directed.

S & F Mild steel framed work such as grills, grating, framed guard bars and similar work conforming to Fe 290 Gde E -165 complete all as specified and directed. .

Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi?chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note:1. Glazed shutters float glass thickness not less than 5.00 mm and wiremesh shutters with stainless steel (SS 304) wiremesh 0.36 mm dia with aperture 1.4 mm shall also be deemed included in quoted rates and no extra payment will be made separately. 2. For UPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

S & F stainless steel Butt hinges, 100mm size complete all as specified and directed.

S & F 200mm long alumunium anodised barrel tower bolts of extructed section complete all as directed and directed.

S & F alumunium handle, fabricated type, anodised 150 mm long complete all as specified and directed.

S & F aluminum alloy anodized sliding door bolt 300mm long with hasp and staple (bolt type) and fixing clip of sheet and cast in extruded section and fixing bolts and sliding bolt of extruded section complete all as directed and directed.

S&F Floor door stopper of aluminium alloy body and tongue, anodised,with hard drawn steel spring,fixed 140 MM Overall length of cover plate complete all as specified and directed.

S & F Continuous (piano) hinges width of flange (whene open) 30mm mild steel, bright finish or elecrogalvanised fixed with screw to timber frame work complete all as specified and directed.

S & F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and as directed.

S&F magnet catcher heavy duty for cupboard shutter complete all as specified and directed.

S&F 8 to 10 mm dia anchor fastner of lentgh ecx 75 mm but n. exc 150 long including drilling holes in concrete/masonary walls/ stucture using electrically operated drill machine complete all as specified and directed Note-Rate quoted includes cost of one 3 mm thick GI washer and one hexagonal GI nut per bolt.

S&F in repair fancy type 25mm dia stainless steel curtain rods/Cupboard hanging rods including bracket/junctions /wall to wall and with end finials of best quality complete all as specified and directed

S&F 4.8 mm Sheet glass,ordinary quality in square of any size complete all as specified and directed.

S & F stainless steel wire cloth 0.36mm dia of wire and average width of aperture 1.4mm fixed with stanless steel staples or steel/wooden beadings to windows complete all as specified and directed.

S & F 300 mm MS ordinary rat tail pattern spring including roller & roller plate complete all as specified and directed

Material and Labour for preparation of new plastered surfaces of wall and applying two coats of oil bound distamper complete all as specified and directed.

Material and Labour for preparation newly plastered surface of wall and applying two coats of cement base paint complete all as specified and directed.

M&L 1 mm thick Birla white putty on wall (two or more coats) complete all as specified and directed

M & L for preparation old treated surface of wall and applying two coats of cement base paint complete all as specified and directed.

M & L for complete removal of existing treatment of old surface of wall and applying distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. including over and incl Priming plastered and other surfaces with alkaliresistant priming paint complete, complete all as specified and directed.

M & L for for preparation of new plastered ceiling surface and applying three coats of white wash complete all as specified and directed.

M & L for preparation of old treated ceiling surface and applying two coats of white wash complete all as specified and directed.

M & L for preparation of new wood or wood based surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M & L preparation of new steel surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

M & L for preparation of old treated steel surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed

M&L for plain cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate and mixed with 3% integral water proofing compound as in padding over roof slab, finished surface even and smooth without using extra cement complete all as specified and directed. Note: WPC shall measured and paid seperately.

M & L for preperation of surface of wall/chajja and applying a coat of tapecrete P-151 acrylic polymer modified cementitious slurry consisting of one part of TAPECRETE P-151 and two parts of cement by weight complete all as specified and directed.

M & L for PCC 1:5:10, type E-2 using 40 mm graded stone aggregate as fondation filling and mass concrete in sunken floor etc incl Demolition of Cement concrete (unreinforced) complete all as specified and directed.

M & L for PCC 1:2:4, type B-0 using 12.5 mm graded stone aggregate as in leveling course,padding of any thickness etc incl Demolition of Cement concrete (unreinforced) complete all as specified and directed.

M & L for PCC 1:2:4, type B-1 using 20mm graded stone aggregate as benching/coping et .complete all as specified and directed.

M & L for 10mm thick rendering on fair faces of brickwork or concrete surface in CM (1:3 ) including finished even and smooth (without using extra lime or cement) using 100% coarse sand on roof surface including WPC as per manufacturer's instructions complete all as specified and directed.

M & L for provision of roof treatment using polymeric water proofing membarane including taking down existing treatment and removal of waste materials all as given below:- (a) Taking down existing water proofing treatment and removal of waste material retrieved to a distance nexc. 500m where directed. (b) M & L for Applying a coat of bituminous primer to IS : 3384 -1986 @ 0.25 Ltrs/Sqm and allowed to dry. (c) M & L for Laying 3mm thick APP membarane having non oven polyester matt at core and covered with high quality polymeric asphaltic protected thermo fusible HMHDPE film on both sides with overlaps 100mm and 150mm at longitudinal and transverse direction respectively and sealed by flame,sealing all overlaps complete including treatment at all junctions and corners.The membrane shall be torched into groove on vertical plane and groove sealed with cement mortar 1:3. (d) M & L for two coats of Aluminium paint on membrane surface all as specified and directed.

Cutting holes in brick walls built in cement mortar or cement lime mortar to a depth measured from the face of jamb exceeding half brick but not exceeding one brick and making good dismantled portion in CM 1:3 or cement concrete 1:2:4 type B1 as required for fixing purlins,rafters etc complete all as specified and directed

S & F steel tubular section Fe-290 (Gde E-165) as in beams ,rafters,purlins and running rails and guide for sliding doors fixed with MS cleats or other connecting plates including cutting, grinding, welding etc as required complete all as specified and directed.

S & F 0.50 mm thick pre-painted galvalume aluminium zinc coating galvanised iron based corrugated steel sheet with side lap and end lap of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregate as in plinth protection surface finished fair and even without using etra cement complete all as specified. Note :- Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3) complete all as specified and directed

Providing post ATT at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed

S & F 18mm thick factory made 100% solid WPC flush shutter (for cupboard, wardrobe ,etc) made from co-extruded three layer rigid foam sheet Single extruded) with 0.8 to 1mm thick outer layer having density not less than 1400kg/cum and density of center core not less than 600kg/cum, with prelamination on both front and back side manufactured by and ISO 9001/2015 certified company complete all as specified and directed.

Supply and fixing Solid PVC Double Door Frame of size 50mm x 95mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawingcomplete all as specified and directed.

Supply and fixing Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. complete all as specified and directed.

M & L for plain cement concrete type C-1 (1:3:6) using 20mm graded stone aggregate for embedding of holdfasts and filling of pressed steel frames etc complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type soil complete all as specified and directed

M & L for PCC (1:4:8) type D-2, using 40mm graded stone aggregate as in foundations, fillings as mass concrete complete all as specified and directed

M&L for 40mm thick PCC 1:2:4, type B0 as in damp proof course to horizontal or vertical surfaces including necessary formwork complete all as specified and directed

M&L for applying evenly a coat of blown type bitumen at the rate of 1.50 kg per square metre and blinding with clean dry sand @ 0.05 cu. m. per sqm complete all as specified and directed

Polythene film, 50 micron thick, laid on a coat of bitumen primer, @ 0.30 to 0.50 kg per sqm complete all as specified and directed

M & L for 75 mm thick PCC (1:4:8) type D-2 using 40mm graded stone aggregate as sub base complete all as specified and directed

M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exc. 0.11 sqm and n. exc. 0.18 sqm in floors etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement. over screed bed or bedding layers of mortars 15 mm thick in CM 1:4 for laying floor finishes complete all as specified and directed

M&L glazed ceramic coloured tiles in vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match incl rendering 10mm thick in CM (1:4) and finished rough including cement mortar bedding ( but not backing removing serviceable tiles from site and rubbish off the premises complete all as specified and directed.

M&L for rendering 15mm thick cement plaster on brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement incl necessary scaffolding complete all as specified and directed

M/L 15 mm thick rendering in cement mortar 1:4 on brick or concrete surfaces and finished even and smooth without using extra cement incl necessary scaffolding complete all as specified and directed

M/Lfor 5 mm thick rendering in cement mortar (1:3) on ceiling surfaces, finished even and smooth without using extra cement incl necessary scaffolding complete all as specified and directed

M/L for 15 mm thick rendering in cement mortar (1:3) on top of roof mixing with WPC and finished even and smooth with using extra cement complete all as specified and directed

M&L for Preparation of newly plastered wall surfaces and applying two coat of cement base paint over a coat of alkali-resistant priming paint complete all as specified and directed

M & L for preparation of newly plastered surfaces and applying three coats of white wash on walls complete all as specified and directed

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed

Formwork to edges of concrete fair finish surface exc. 10 cm but n. exc. 20 cm wide (Horizontal or sloping) complete all as specified and directed

M&L for MS TMT bars 06 to 08 mm dia, cut to length, bent to shape required, including cranking, bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed

M&L for cement concrete (1:1.5:3) type A-1 (using 20 mm graded stone aggregate) as in slabs supported on walls, beams etc complete all as specified and directed

S&F aluminium frame work for doors , ventilators, partition walls with one or more rebates including joining cleat for fixing etc incl fixing of louvered glass in half of frame and half portion to be provided with fixed wire mesh complete all as specified and directed

S & F 3.00 mm thick louvered glass fixed in aluminium frame as provided complete all as specified and directed

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x 100 mm mprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 mm2 and resistance to spread of flame of Class A category with property of being mite/borer proof,water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length .complete all as specified and directed. Note: (i) For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made (ii) M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid both side decorative type (Laminated both side) flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and directed. Note: Stainless steel butt hinges and necessary S.S screws shall be paid separately

S & F 250 mm long MS Chromium plated, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S & F Vitreous china wash basin, white flat back,size 550 x 400 mm including waste pipe , brackets and cutting for and pinning in ends of brackets or errecting stand and 32 mm dia PVC waste pipe including waste copling 32mm size full thread complete all as specified and directed.

S&F Pillar taps, cast copper alloy, fancy type, with capstan heads, chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S & F CP bib taps 15mm fancy type Chromium Plated with crutch or butterfly handle complete all as specified and directed.

S&F CP Stop valve/ Angle valve 15mm (ISI Marked) screwed down high pressure with capstan head screwed both ends for iron pipe 15mm bore dia complete all as specified and directed.

S&F Vitreous China squatting pan of orissa pattern, size 580x440mm white with CI ‘P’ or ‘S’ trap, front or back inlet and foot rests, any pattern ( including fixing of flush pipe) including provision of cement concrete bedding, complete all as specified and as directed.

S&F PVC dual operated flushing cistern incl PVC connection inlet and and outlet connections,brackets, PVC flush pipe with bend 32 mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC complete all as specified and directed.

S&F Vitreous china bowl urinal flat back, size of 465 x 355 x265 mm white (minimum ),with grating and union for discharge pipe (excluding flushing cistern and flush pipe and waste pipe )complete including provding and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S& F sheet glass shelf assembly consisting of 5.5mm thick sheet glass (cutting in any shape) fixing with chromium plated brackets guard complete all as specified and directed.

S& F Stainless steel Grating doom 100mm dia complete fixing in floors complete all as specified and directed.

S& F Stainless steel Grating doom 100mm dia with waste hole complete fixing in floors complete all as specified and directed.

S&F 15 mm bore Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F 20 mm bore Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Cutting 25 mm existing steel tubing for alterations or additions (Each cut measured) in position without taking down complete all as specified and directed.

S & F stop valves suitable for 20 mm bore iron pipe, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F Cast iron floor trap 100 mm with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

S&F Cast iron gully/nahani trap 100 mm with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

S & F 100 mm bore Cast iron soil, Spun, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed.

S & F 75 mm bore Cast iron soil, Spun, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed.

S & F CI bends any radius 100mm size complete all as specified and directed.

S & F CI bends any radius 75 mm size complete all as specified and directed.

S&F Rotational moulded polyethlene water storage tanks of capacity 500 litres three layers (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete including 20mm dia ball PVC valve high pressure with polythene float complete all as specified and directed.

M&L for cement concrete (1:3:6) type C-2 using 40 mm graded aggregate as in foundation filling & mass concrete etc complete all as specified and directed.

M&L for cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregate as in concrete bed to drain pipes including packing under and hauching against the sides of pipes after they are laid and tested; in complete all as specified and directed.

S&F PVC(SWR) pipes 150mm bore, double socketd , In any length with rubber ring joints , in any length laid in floors/ trenches complete all as specified and directed.

Returning filling in, including spreading, leveling, watering and well ramming in layers n.exc 25 cm in soil complete all as specified and directed.

Removing excavated soil to a distance n. exc 50 m and depositing where directed at a level n.exc.1.50 mtr above the starting point.

Provn of Soakage well, excavation in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats complete of size 1.80 M dia X 4.50 M deep complete all as specified and directed.

Provn of 10 users on site Hume Pipe Septic tank designed to carry sewage and sludge water, excavation in any type of soil , foundation in PCC (1:2:4) , incl RCC slab cover including RCC precast manhole cover, vent shaft, connection complete all as specified and directed.

Excavation over area n. exc 1.5m deep and getting out in soft/loose soil complete all as specified and directed.

M & L Reinforced cement concrete (Design Mix) M-25 (using 20mm graded aggregate) as in foundation including rafts, footings, foundation beams, plinth beam, bases for columns etc complete all as specified and directed.

M & L Reinforced cement concrete (Design Mix) M-25 (using 20mm graded aggregate) as in columns, pillars, piers, posts and struts complete all as specified and directed.

M & L Reinforced cement concrete (Design Mix) M-25 (using 20mm graded aggregate) as in beams, cantilevers, bresummers, lintels over 1.5 m clear span complete all as specified and directed.

S & F Form work to sides of concrete foundation, footings, bases of column,raft and raft beam, sides and soffits (if any) of foundation and plinth beams, and similar work, vertical or to batter for fair finished surface of concrete complete all as specified and directed.

S & F form work to sides of pillars, posts, struts, piers, columns and stanction for fair finished surface of concrete complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed.

M & L Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirupps, spaces and binders cut to length bent to shape required including cranking bending hooking ends and binding with MS wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S & F angle iron and flat iron as in fencing posts, struts, fillets etc including cutting to shape as required, drilling holes, notching for wires, splitting ends etc conforming to Fe 290 Gde E-165 complete all as specified and directed.

S & F in repair Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc (each line wire to be measured) complete all as specified and directed.

Demolition of brickwork built in cement mortar or cement lime mortar complete all as specified and directed

M & L Brick work straight or curved on plan exc 6m mean radius built in CM 1:6 but except bricks complete all as specified and directed.

Taking down cement or cement lime plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M & L 15mm thick rendering in CM 1:4 on brickwork or concrete surface finishing the surface even and fair without using extra cement complete all as specified and directed.

Demolition of Plain Cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M & L PCC 1:3:6 type C-2 (40mm graded stone aggregate) as in fixing of fencing post/struts etc complete all as specified and directed.

Demolition of Cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M & L for preparation of old srfaces of wall and applying two coats of white wash complete all as specified and directed.

Supply & Laying or passing through pipe, 1100 volt grade heavy duty cable with XLPE insulated Aluminum condector served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and over all PVC sheathed of 10 Sq mm 2.0 core stranded condector nominal cross section complete all as specified and directed.

M&L for sand cushioning to UG cables (8 cm deep before laying of cable and 15cm deep over the cable) complete all as specified and directed.

Supply & Laying sub class `B’ bricks old sizes over the HT/LT cable laid flat for protection of cable complete all as specified and directed.

M&L cutting PCC/floor/road and taking out cable and making good, including material as per existing after laying of pipe for cable protection all as specified and directed size of trench not more than 0.30 x 0.30 cm complete all as specified and directed.

M & L for galvanised steel tubing 50 mm bore light grade laid in trenches, road crossings pole/wall etc. for cable protection including providing MS flat iron 50mm x 6mm clamps (02 Nos) complete all as specified and directed including taking down the existing UNSV steel tubing complete all as specified and directed.

S & F GI pipe`Medium grade', 40 mm Bore dia including all fithings laid in trenches or fixed on wall floor /tranches etc complete all as specified and directed.

S & F GI pipe `Medium grade', 25 mm Bore dia including all fithings laid in trenches or fixed on wall floor /tranches etc complete all as specified and directed.

M & L Gun metal globe or gate valve with iron wheel head, screwed both hands from iron pipe and fix complete fitting of size 40 mm dia with ISI marked conf to IS 778,class - I complete all as specified and directed.

M & L Gun metal globe or gate valve with iron wheel head, screwed both hands from iron pipe and fix complete fitting of size 25 mm dia with ISI marked conf to IS 778,class - I complete all as specified and directed.

M & L for Cutting Steel iron/GI pipes size 40 to 50 mm dia and in position insertion of new tees, branches, etc complete all as specified and directed.

M&L cutting PCC/floor/road and taking out cable and making good, including material as per existing after laying of pipe for cable protection all as specified and directed size of trench not more than 0.30 x 0.30 cm complete all as specified and directed.

M&L for Brick masonary valve pit of size 0.450X0.450X0.900mtrs (internal dimensions) including excavation and earh work in any type of soil,plastering all walls surfaces internally and flush pointing to brick work externally as the work proceeds complete including angle iron 40x40x6 mm frame work,MS sheet cover 3mm thick ,handle , locking arrangement and painting complete all as specified & directed.(For 40 mm Gate valve) complete all as specified and directed.

Taking down copper / aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or taking credit and making good the disturbed surfaces of walls, floors, etc complete all as specified and directed.

Taking down carefully copper/aluminum sub main wiring including teakwood batten/conduit and making good the disturbed surface of walls complete all as specified and directed.

Taking down DBs any type and size including MCBs removing materials to store for keeping in safe custody or taking credit and making good the disturbed surfaces of walls, floors, etc complete all as specified and directed.

M&L, Point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits), with multi-stranded copper conductor 1.5 Sq. mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade, ISI-694 marked with valid CML No. in and including medium grade PVC concealed conduit and conduit accessories concealed in wall/roof/floor etc, ISI marked with valid CML No.(IS-9537-1983 for conduits and IS:3419:1976 for conduit accessories), with mild steel/pressed steel sunken boxes (with earth dolly) duly painted with two coats of anti corrosive paint/aluminium paint over a coat of red oxide primer internally, and two coats of black bituminous paint over a coat of red oxide primer externally, covered with 3 mm thick plastic laminated sheet cover for fixing of switches, sockets and fan regulators etc, including PVC insulated multi-stranded copper conductor 1.5 Sqmm nominal cross sectional area single core F.R.L.S.H. cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed at site for one light / fan point controlled by one switch with cable size 1.5 sqmm and the following:- NOTE:- Switch and socket to be measured and paid for separately.

All as per Serial item No. 183 here in before but One bell / buzzer point controlled by one bell push button on the same board with other switches or independent with cable size 1.5 sqmm complete all as specified and directed.

All as per Serial item No. 183 here in before but One 3 Pin, 5 Amp socket outlet point on an independent board with cable size 1.5 sqmm complete all as specified and directed.

All as per Serial item No. 183 here in before but One 3 Pin, 5 Amp socket outlet point on same board with other switches with cable size 1.5 sqmm complete all as specified and directed.

All as per Serial item No. 183 here in before but One 3 pin, 15 Amp socket outlet point on an independent board with cable size 2.5 sqmm complete all as specified and directed.

S&F modular switch, single pole, one way 6 Amp, 230 Volts, 1 module complete all as specified and directed.

S&F modular switch, single pole, 1 way 16A, 230 V,1 module complete all as specified and directed.

S&F Modular Bell push 6A, 1 module complete all as specified and directed.

S&F modular socket, single pole, 3 pin 6 Amp, 230 Volts, combined 2 module complete all as specified and directed.

S&F modular socket, single pole, 3 pin 6/16 Amp, 230 Volts, combined 2 module complete all as specified and directed.

S&F modular rotary step type fan regulator, single pole, 120 W, 2 module, complete all as specified and directed.

S & F modular white cover plate with frame, 3 module complete all as specified and directed.

S & F modular white cover plate with frame, 6 module complete all as specified and directed.

S & F modular white cover plate with frame, 8 module complete all as specified and directed.

Supply and fix modular type blanking plates, one moudle complete all as specified and directed.

S & F Call bell, AC, 230 volts, single pole complete all as specified and directed.

S & F angle type holder insulated body with back plate suitable for batten fittings complete all as specified and directed.

Supply and fix ceiling rose, three terminals, polycarbonate body complete all as specified and directed.

S&F LED 9 Watt Lamp 6500K, pin type (B22) as required complete all as specified and directed.

Supply & fixing bulk head light fitting made from cast aluminium body with heat resistance pressure die cast housing, IP-65 protection cover suitable for bulk head fitting integrated type 10 W LED, 6000K , 120 lumens/watt including inbuilt electronic driver complete all as specified and directed.

S & F Decorative wall light fixture made up of Metal base, synthetic white in colour and square/round metal base with bend pipe and glass globe with nickel finish, with 01 No. 12 W LED Bulb, 230 V, 6000K, complete incl all required electrical connecting arrangements complete all as specified and directed. Note: Rates incl 01X 12 W LED Bulb with each fitting

Supply and fixing wall/surface mounting luminaires (Mirror Light) integrated LED Batten( 2 feet) 10/12 W, 6500 K, 230V ,100 lumens/watt,with extruded aluminium housing & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements complete all as specified and directed.

Supply and Fixing wall/surface mounting luminaires integrated LED Batten 20/22 W, 6000 K,120 lumens/watt , 230V with extruded Aluminium housing 4 feet long with frosted PMMA/PC diffuser & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements complete all as specified and directed.

S & F in repair LED Building security light 35 Watt with high power LED source (>110lumen/watt) PDC housing, IP65 and IK 07 with 4 KV inbuilt surge protection potted driver including Electrical connection with PVC three core copper flexible wire & all necessary fixing accessories such as bracket of GI pipe light grade 32/40 mm dia 1.2 mtr long bend to shape as per suitable size along with all accessories, fixed on wall including bolts & nuts complete all as specified and directed.

M&L for Submain wiring with two single core unsheathed, PVC (FRLSH) insulated, 1100 Volts grade cable with 6.0 sqmm nominal cross sectional area Multi-stranded copper conductor and one single core green unsheathed, PVC (FRLSH) insulated, 1100 Volts grade cable with 6.0 sqmm Multi-stranded copper conductor earth continuity cable drawn through non metallic rigid PVC conduit 25 mm dia including all conduit and fixing accessories concealed in wall including cutting chases in wall and making good disturbed surface to match of walls/ceiling complete all as specified and directed. Note - PVC Conduit and accessories shall be deemed to be included in the quoted rate

M&L for Submain wiring with two single core unsheathed, PVC (FRLSH) insulated, 1100 Volts grade cable with 4.0 sqmm nominal cross sectional area Multi-stranded copper conductor and one single core green unsheathed, PVC (FRLSH) insulated, 1100 Volts grade cable with 4.0 sqmm Multi-stranded copper conductor earth continuity cable drawn through non metallic rigid PVC conduit 25 mm dia including all conduit and fixing accessories concealed in wall including cutting chases in wall and making good disturbed surface to match of walls/ceiling complete all as specified and directed Note - PVC Conduit and accessories shall be deemed to be included in the quoted rate

S&F in replacement sheet metal enclosure for MCB DB double door type fabricated out of high quality CRCA sheet for single pole and neutral 12 way 240 Volts with 125/200 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, IK09, True IP 43 (with PU Gasket) with test certificate factory made complete without MCB and with enclosure blank plates for unused way and fixed properly on wall with suitable size ms flat iron with nut bolts washer etc complete all as specified and directed.

S&F in replacement sheet metal enclosure for MCB DB double door type fabricated out of high quality CRCA sheet for single pole and neutral 8 way 240 Volts with 125/200 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, IK09, True IP 43 (with PU Gasket) with test certificate factory made complete without MCB and with enclosure blank plates for unused way and fixed properly on wall with suitable size ms flat iron with nut bolts washer etc complete all as specified and directed.

S&F in replacement sheet metal enclosure for MCB DB double door type fabricated out of high quality CRCA sheet for single pole and neutral 4 way 240 Volts with 125/200 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, IK09, True IP 43 (with PU Gasket) with test certificate factory made complete without MCB and with enclosure blank plates for unused way and fixed properly on wall with suitable size ms flat iron with nut bolts washer etc complete all as specified and directed.

Supply and fixing of MCB SP 240 volts of 06 to 32 Amps, 10 KA, 'B' Curve Current carraying capacity complete all as specified and directed.

Supply and fixing of MCB SPN 240 volts of 40 Amps, 10 KA, 'B' Curve Current carraying capacity complete all as specified and directed.

S&F Modular AC BOX Power unit with Socket Plug top and MCBs with Single pole and neutral enclosure with a two pin and one pin for earth plug and socket complete with one single pole MCB 25 Amp complete all as specified and directed.

Taking down electric meter and refixing on new board after rewiring in replacement of unservicable wire complete all as specified and directed by Engr-in-charge.

Taking down water heater (Geyser) 25/50 ltr capacity or any type and refixing after overhalling and painting with writing the MES no and 4 Nos full threaded fastener of size 100x10 mm with, 2 No washer, water connection with 02 Nos flexible steel hose pipe of size 15 mm, 450 mm lenght & suitable plug top of 16 Amp capacity complete all as specified and directed

Taking down Exhaust fan/ Fresh Air fan of any sweep/size any type and refixing after oiling, gressing and painting with writing the MES no. and any reqd of anchor fastner nut bolt washer, including electric connetion work complete all as specified and directed

Taking down ceiling fan 1200/1400 mm sweep any type and refixing after oiling, gressing and painting with writing the MES no. including electric connetion work complete all as specified and directed

M&L of Earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less 1.5 mtr deep below normal ground level connected to galvanized earth lead wire 4.0 mm dia by means of nut, bolts, check nut & washer of galvanized iron or of steel, earth lead protected by 15 mm dia GI pipe light grade watering pipe 20 mm dia GI light grade GI wire meshed funnel alternate layer of char coal and salt PCC chamber, reassed for and including RCC cover including all necessary excavation & earth work, earth 7.5 mtr wire connected to main switch board, testing the earthing after completion all as specified and shown in electric plate No 3 of MES SSR Part-I 1991 print and complete all as per specified and directed

All as item No 219 herein before but using 2.5 sqmm , PVC insulated, stranded copper conductor single core cable for one 3 pin 15/20 Amp socket out let point on an independent board complete all as specified and directed.

S & F switch piano flush button single pole one way 5 Amp 240 volt complete all as specified and directed.

S & F switch piano flush button single pole one way 15 Amp 240 volt complete all as specified and directed.

S & F socket outlet flush type multipurpose 2 in 1 , 3 pin 5 and 15 Amp, 230 volts complete as directed.

S & F socket outlet flush type 5 pin 5 Amps 240 volts complete all as specified and directed.

S&F in repair LED Building security light 24/25 Watt with high power LED source (>110lumen/watt) PDC housing, IP65 and IK 07 with 4 KV inbuilt surge protection potted driver including Electrical connection with PVC three core copper flexible wire & all necessary fixing accessories such as bracket of GI pipe light grade 40 mm dia 0.60 mtr long bend to shape as per suitable size along with all accessories, fixed on wall including bolts & nuts. Make philips Green line smart cat no BRP042 LED 25 CW SLE S1 PSU GR P4210/ Bajaj Edge nxt LED cat no ENXT P 24L WH CR PC SD/ Eveready Mini might cat no LED SL025157-02

Supply and fixing of heavy duty metal body exhaust fan single phase 230/240 volt of size 300 mm sweep including holes of suitable size grouting of nuts and bolt etc and making good to match the existing surface including louvers and making connetion with twisted copper flexible wire 23/0.076mm, including disconnecting and taking down old unserviceable exhaust fan and deposited in AGE E/M (W) store yard for BER action complete all as specified and directed.

M/S PERFECT CONSTRUCTION CO. (BID ID -3486371)

M/s Vimal Traders (BID ID -3489762)