Design, Supply, Installation, Testing and Commissioning of Fire Hydrant System at New Office Complex of JKSSRB, Muthi Jammu

Amount

SITC of over ground M.S Pipes (C class) including cutting holes & chases in bricks or RCC wall/slab & Making good the same. Painting with one coat of primer and two coats of synthetic enamel of approved shade of following sizes:a) 150 mm dia

b) 100 mm dia

c) 80 mm dia

d) 65 mm dia

e) 50 mm dia

f) 40 mm dia

g) 32 mm dia

h) 25 mm dia

Supplying and fixing single headed hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required :Single headed S.S

Supply of non-percolated flexible hose RRL 63mm dia x 15 mtr long complete with instantaneous type 63mm dia male and female ISI marked coupling and Riveted to hose pipe with rivets and copper wire.& ISI marked

Supply & installation of gunmetal 63mm dia short branch pipe with 20mm dia nozzle.

S/f of First Aid Hose Reel complete with 30 mtr 20 mm hose with shut off nozzle complete as required.

SITC of cast iron double flanged ISI marked Butterfly valve complete with rubber insertion, nuts, bolts, washers etc. of following sizes:a) 150 mm dia

b) 80 mm dia

SITC of other allied accessories:a) 25mm dia spring loaded air release valve with isolation cork.

b) Pressure Guage.

c) Pressure Switch

d) 25 mm dia ball valve

SITC of cast iron double flanged ISI marked NRV complete with rubber insertion, nuts, bolts, washers etc. of following sizes:a) 150 mm dia

b) 80 mm dia

Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange. Required 150mm dia

SITC of gunmetal Fire Brigade connection with collecting head 63mm,4 way instantaneous type male couplings with flanged outlet complete with blank caps nuts, bolts & rubber insertions, conforming IS:904-1983

SITC of gunmetal suction coupling for Fire Brigade drawal of water from fire tank of 100 mm dia.

SITC of the AUTOMISATION CONTROL PANEL consist of a control cubicle of fabricated sheet steel suitable for floor mount and for 3 phase, 4 wire, 50 hz system incorporating suitable isolating main switches, bus bars, relays, contactors, indication lamps, fuses, instruments automatic isolator and auxiliary switch including connectors complete as required for 1 main electric pump, 1 jockey pump and 1 Diesel Pump etc as required for the system.

Supplying & lying of 3.5 core 10 sqmm Aluminum cable from motor to electrical panel for automation of the system.

Supplying & lying of 3.5 core 50 sqmm Aluminum cable from motor to electrical panel for automation of the system.

Supplying & lying of 2 core 2.5 sqmm Aluminum cable from motor to electrical panel for automation of the system.

Testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting following complete in all respect as required .(a) Horizontal type multistage centrifugal pump of cast iron body and bronze impeller with stainless steel haft mechanical seal to ensure to farthest outlet n at specified flow of 2250 lpm at 70m head conforming.(b) Suitable 25 HP water cooled with radiator diesel engine conforming to relevant BS & IS standard complete with auto starting mechanism 12 volts /24 volts electric starting equipment Diesel tank exhaust pipe extended upto 1 m outside pump house duly

Horizontal type three phase pump of cast iron body & bronze impeller with stainless steel shaft mechanical seal to ensure at highest and farthest outlet at specified flow of 2250 lpm at 70 mtr head conforming to suctiion 100mm and delivery 100 mm.( Main fire pump)

Horizontal type three phase pump of cast iron body & bronze impeller with stainless steel shaft mechanical seal to ensure at highest and farthest outlet at specified flow of 800 lpm at 70 mtr head conforming to suction 80mm and delivery 65 mm. (Jockey Pump)

Supply, Installation, testing and Commissioning of sprinkler flexible pipe (UL Listed) of Stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25 mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reduce, nipple, 2 side brakets, center Brakets, stockbar of following sizes complete as required.

Providing, Fixing, Testing and Commissioning of 15 mm dia Quardzoid Bulb Type Sprinklers of rating 68oC with required accessories

Providing & fixing ABC type fire extinguishers 6 Kg cap. Complete with discharge arrangement, high-pressure hose pipe complete as req.

Providing & fixing CO2 type fire extinguishers 4.5 Kg cap. Complete with wheel valve arrangement, high-pressure wire Braided hose pipe as req. conf. to IS 2878.

S/f of Ceiling mounted type ABC fire extinguisher 5 kg capacity as required.

Earthwork excavation in trenches including backfilling and leveling the top after laying of MS pipe.

Supply & installation of weather proof Double Door hose cabinets fabricated from 18 swg MS sheet/section with full front glass door and suitable to accommodate 2 nos 15 mtr long hoses and 1 no branch pipes as req.

SITC of Air vessel 250mm dia and 1.5 mtr high with dished top, made of 6mm thick MS pipe complete with provision for 25 NB dia gun metal air release valve, 20mm dia stop valve,25Nb gun metal pressure release valve,25NB drain valve , pressure gauge & all accessories as req and painted.

Bucket stand with 4 nos 9 ltr Buckets

Earthing with G.I earth plate (600 x 600 6) mm thick including accessories & providing masonry enclosure with M.S cover plate & Watering pipe of 40 mm dia etc. as required with charcoal and Salt including excavation and back filling complete as required.

Fabrication of signage board made out of flex board of dimension 3ft x 5ft for providing information regarding important telephone numbers of nearest fire stations and other allied agencies to be displayed in every block as well as on Main Entrance Gate.

Providing and fixing of fire auto glow signage with printed “IN CASE OF FIRE, USE STAIR UNLESS INSTRUCTED OTHERWISE” in sticker/acrylic sheet from on boards made out of 3mm thick PVC foam board of 1.5cm height letters in red with white back ground for old building block and new building block. The size of the board shall be 25cm x 30cm and shall fixed at a height of 2m from finished floor near manual call points.

Providing and Fixing of fire Notice, Fire Order, Exit Sign, Floor Nos to be displayed at conspicuous places as per requirements of NBC Part IV.

Annual Maintenance for one year post warranty period Note: 1. AMC includes checking inspection, maintenance and testing of the system in quarterly basis. 2. The contractor shall be imparting training to the security personals in handling/operational and procedure for all the firefighting systems.

FIRE TECHNOS

ZOON ENGINEERING TRADERS

CYBER INFOTECH SERVICES

LEO AIR & POWER SOLUTION PVT. LTD.

Dogra and Dogra Enterprises