REPAIR REPLACEMENT TO INTERNAL WATER SUPPLY PIPES AND FITTING SANITARY WORKS AND OTHER ALLIED WORKS AT BLDGS OF SECTOR B UNDER AGE BR II OF GE 865 EWS

Amount

Taking down cement plaster of any description on brick or stone walls, concrete surfaces including racking out joints, hacking for key, scrubbing down with water remove dust, debries/rubbish etc, complete all as specified and as directed.

M&L for rendering 15mm thick rendering in cement mortar 1:6 on fair faces of brick walls or on concrete surfaces, finished even and smooth without using extra cement in complete all as specified and as directed

M&L for rendering 15mm thick rendering in cement mortar 1:4 on fair faces of brick walls or on concrete surfaces, finished even and smooth without using extra cement in complete all as specified and as directed

M&L for two coats cement base paint on newly plastered surfaces of wall including preparation of surfaces including curing before and after applying each coat complete all as specified and directed.

Preparation of newly plastered or undecorated plastered surfaces of walls and applying two coats of oil bound distemper, of any tint as approved, over a coat of primer over and including 2 mm thick coat of Birla white wall care putty, complete all as specified and directed by Engr-in-charge.

M&L for 15mm bore medium grade galvanished iron water tubing with all fittings and fixed, taking up or down steel tubing / PPR pipe and connections and set aside for re-use or removal to store, complete to walls or laid in trenches.complete all as specified.

M&L for 20mm bore medium grade galvanished iron water tubing with all fittings and fixed, taking up or down steel tubing / PPR pipe and connections and set aside for re-use or removal to store, complete to walls or laid in trenches.complete all as specified.

S & F 20mm dia 3 layer PP-R polypropyene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed, taking up or down steel tubing / PPR pipe and connections and set aside for re-use or removal to store, complete all as per manufacture instructions and as directed by Engineer in Charge).

S & F 25mm dia 3 layer PP-R polypropyene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed, taking up or down steel tubing / PPR pipe and connections and set aside for re-use or removal to store, complete all as per manufacture instructions and as directed by Engineer in Charge).

S & F 32mm dia 3 layer PP-R polypropyene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed, taking up or down steel tubing / PPR pipe and connections and set aside for re-use or removal to store, complete all as per manufacture instructions and as directed by Engineer in Charge).

S&F in repair 20mm outer dia PPR Gate valve (Brass insert) confirming to ISO 2000 high pressure with epoxy coated aluminium rod and high density plastic ball screwed for PPR pipe or for union and fixed as per requirement of site completely all as specified and directed by the Engr-in-Charge.

S&F in repair 20mm outer dia PPR Ball valve (Brass insert) confirming to ISO 2000 high pressure with epoxy coated aluminium rod and high density plastic ball screwed for PPR pipe or for union and fixed as per requirement of site completely all as specified and directed by the Engr-in-Charge.

Cutting chases, pinning in to stone, concrete block or slab walls, including making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exceeding 10 cm but not exceeding 20 cm girth complete all as specified and as directed by Engineer-in-Charge.

S & F 750 mm long, 32mm dia., PVC flexible Waste pipe for sinks / wash hand basins, fixed in repairs, complete all as specified and as directed.

Rotational moulded polyethylene water storage tank, inner and out white, two layers, ISI marked (cylinderical vertical with closed top) hoisted with Threaded Cap and fixed in position all as specified in SSR Part-I of Capacity 500 litres each including all accessories (i.e GI nipples, etc), including provn of 20/15mm dia spout for connecting inlet, outlet, overflow and washout pipes, including taking down of old broken water tank complete all as specified and as directed by Engr-in-Charge.

Rotational moulded polyethylene water storage PUF tank, PUF insulated with 75 mm thick PUF insulation of density not less than 48Kg/Cum, inner and out white, two layers, ISI marked (cylinderical vertical/rectangular/loft type with closed top) hoisted with Threaded Cap and fixed in position all as specified in SSR Part-I of Capacity 500 litres each including all accessories (i.e GI nipples, etc), including provn of 20/15mm dia spout for connecting inlet, outlet, overflow and washout pipes, including taking down of old broken water tank complete all as specified and as directed by Engr-in-Charge.

Rotational moulded polyethylene water storage tank, inner and out white, two layers, ISI marked (cylinderical vertical with closed top) hoisted with Threaded Cap and fixed in position all as specified in SSR Part-I of Capacity 1000 litres each including all accessories (i.e GI nipples, etc), including provn of 20/15mm dia spout for connecting inlet, outlet, overflow and washout pipes, including taking down of old broken water tank complete all as specified and as directed by Engr-in-Charge.

20mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 210 gram), complete all as specified and as directed by Engineer-in-Charge.

20mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 210 gram), fixed in repairs, complete all as specified and as directed by Engineer-in-Charge.

15mm bore, Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms/20mm-125gms), fixed in repairs, complete all as specified and as directed by Engineer-in-Charge.

15mm bore bib tap, long body with wall flange, chromium plated, fancy type, cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule, fixed in repairs, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs health faucet manually operated (Hand held) complete set with CP Nipple-01 (100/50mm as required) and CP Tee-01 No connected to existing taps with 8mm dia 1.20 metre long flexible tube and wall hooks complete all as specified and as directed. Make: Cat part No ALD-CHR-573 of Jaquar or equal approved in Kohler

Angular stop cock/Angle cock with wall flange, with long shank and cup (concealed type), fancy type, brass, chromium plated, screwed down for iron pipe or for brass ferrule for bore of pipe 15 mm, fixed in repairs, complete all as specified and as directed by Engr-in-Charge.

15mm bore, Stop valve standard of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms/20mm-92gms), fixed in repairs, complete all as specified and as directed by Engineer-in-Charge.

S&F Brass Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union, suitable for 15 mm bore, fixed in repairs, complete all as specified and directed by Engineer-in-Charge.

Swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms), fixed in repairs complete, all as specified and as directed by Engr-in-Charge.

15mm bore pillar tap cast copper alloy chromium plated screwed downhigh pressure, with or without lettered 'hot or cold' with long screwed shanks and fly-nuts screwed for iron pipe, fixed in repairs, complete all as specified and directed by Engineer-in-Charge.

S&F Grating doom 100mm dia of brass, chromium plated, (Minimum weight 60gms), fixed in repairs, complete all as specified and as directed.

S&F Grating doom 100mm dia of PTMT (Minimum weight 25gms), fixed in repairs, complete all as specified and as directed.

PVC connections 15 mm size with PTMT nuts of length 450 mm, fixed in repairs, complete all as specified and diected by Engr-in-charge.

PVC connections 15 mm size with PTMT nuts of length 600 mm, fixed in repairs, complete all as specified and diected by Engr-in-charge.

S & F tubular towel rail 600mm long of aluminium anodised, 20mm dia, D type, fixed with and including chrominium plated brass screws and wooden/plastic cleats (Min Wt 270 Gms), fixed in repairs complete all as specified and as directed.

10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets with twin flush provision, complete, fixed in repairs all as specified and as directed by Engr-in-Charge. MAKE: Cera Model Combiflush twin flush as per Cat Part No. B1020101 (Old Cat Part No 2603) or equivalent in HINDWARE/PARRYWARE

Viterous china wash basin, white flat back size 550 x 400mm including waste coupling CP 32mm dia and CI brackets of iron 65 x 65 x 6mm embedded in PCC block with PCC 1:2:4 type B-1 and PVC waste pipe 32mm dia & CP grating with holes fixed in repairs complete, all as specified and as directed by Engr-in-Charge.

Vitreous china water closet, 'Orissa' pattern, including lime concrete bedding, size 580 x 440 mm white with integral foot rests excluding flushing cistern and flush pipe but including connection to trap, anti syphonage pipe etc. complete fixed in repairs, incl bedding with PCC 1:2:4 type B-1 using 20 mm grade stone aggregate complete all as specified and as directed by Engr-in-Charge.

32 mm dia Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed, complete all as specified and as directed by Engr-in-Charge.

15mm bore pillar tap cast copper alloy chromium plated screwed downhigh pressure, with or without lettered 'hot or cold' with long screwed shanks and fly-nuts screwed for iron pipe, complete all as specified and directed by Engineer-in-Charge.

S&F sinks stainless steel with drainage board made of 1.0 mm thick kitchen or laboratory with plugs, washers and wastes; including fixing contilever brackets and connecting union to pipe overall size 915mmx460mm bowl size 410mm x 330mm x 160mm, fixed in repairs, complete all as specified.

S&F Vitreous China Urinal, full stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) fixed in repair, complete all as specified and as directed

Toilet paper holder, white, with flat recessed type stainless steel, fixed in repairs, complete all as specified and diected by Engr-in-charge.

32 mm dia Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed, fixed in repairs, complete all as specified and as directed by Engr-in-Charge.

Disconnecting existing tanks of capacity exceeding 250 litres but not exceeding 500 litres, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. complete all as specified and as directed.

600 mm x 450 mm mirror of thickness 5/5.5mm of slected quality glass, mounted on 6 mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete, fixed in repairs all as specified and as directed by Engr-in-Charge.

Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, fixed in repairs, complete all as specified and as directed.

75 mm bore, PVC (SWR) pipes, pressure rating 4 kg/sqcm, single or double socketed, in any length with rubber ring joints, fixed to wall with clamps, including dismantling of SGSW, cast iron, AC, PVC or reinforced concrete pipes jointed in cement mortar complete all as specified and as directed by Engr-in- Charge.

110mm bore, PVC (SWR) pipes, pressure rating 4 kg/sqcm, single or double socketed, in any length with rubber ring joints, laid in trenches or in floors including dismantling of SGSW, cast iron, AC, PVC or reinforced concrete pipes jointed in cement mortar complete all as specified and as directed by Engr-in- Charge.

S&f 75mm bore PVC (SWR) pipe bends any radius complete all as specified and as directed.

S&f 110mm bore PVC (SWR) pipe bends any radius complete all as specified and as directed.

S&F 75mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and as directed.

S&F 110mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and as directed.

S&F 75mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and as directed.

S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and as directed.

S&F 75mm bore PVC (SWR) vent cowl complete all as specified and as directed.

S&F 110mm bore PVC (SWR) vent cowl complete all as specified and as directed.

S&F soap dish, brass, chromium plated, fixed to plugs with CP brass screws, fixed in repairs, complete all as specified and as directed.

Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed suitable for 15mm bore of pipe, fixed in repairs, complete all as specified and as directed. Make: Jaquar/Kohlar/Cera

M&L 75 mm bore PVC (SWR) floor traps plain with grating including jointing with solvent cement, fixed in repairs, complete all as specified and as directed.

M&L PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement, fixed in repairs, complete all as specified and as directed.

S&F in replacement gun metal, globe or gate valve ISI marked cast with ironwheel head, screwed both ends for iron pipe and fixed for 15 mm dia bore complete all as specified & directed by Engr-in-Charge.

S&F in replacement gun metal, globe or gate valve ISI marked cast with ironwheel head, screwed both ends for iron pipe and fixed for 20 mm dia bore complete all as specified & directed by Engr-in-Charge.

S&F in replacement gun metal, globe or gate valve ISI marked cast with ironwheel head, screwed both ends for iron pipe and fixed for 32 mm dia bore complete all as specified & directed by Engr-in-Charge.

S&F CP brass jet spary for Europen type water closet with 1.5m long flexible PVC pipe and connectiong nipple, fixed in repairs, complete all as specified & directed. Make :- Parko/GEM/Elite/Cera/Parry ware/Ess Ess

S&F stainless stel plate rack of size 900 x 600 x 200mm of best quality made out of 1mm tthick sheet, fixed in repairs, complete all as specified & directed. Make :- Parko/GEM/Elite/Cera/Parry ware/Ess Ess

S&F fancy type glass corner self with CP brackets, fixed in repairs, complete all as specified & directed. Make :- Parko/GEM/Elite/Cera/Parry ware/Ess Ess

S&F single hole, bras, chromium plated, wash hand basin mixer cock, 15mm dia, fixed in repairs, complete all as specified & directed. Make :- Parko/GEM/Elite/Cera/Parry ware/Ess Ess

S&F PPR 15 mm bore socket in new or old, fixed in repairs, complete all as specified & directed.

S&F PPR 15 mm bore Tee in new or old position, fixed in repairs, complete all as specified & directed.

S&F PPR 15 mm bore elbow/bend in new or old position, fixed in repairs, complete all as specified & directed.

S&F PPR 25 mm bore socket in new or old position, fixed in repairs, complete all as specified & directed.

S&F PPR 20 mm bore socket in new or old position, fixed in repairs, complete all as specified & directed.

S&F PPR 25 mm bore Tee in new or old position, fixed in repairs, complete all as specified & directed.

S&F PPR 20 mm bore Tee in new or old position, fixed in repairs, complete all as specified & directed.

S&F PPR 25 mm bore elbow/bend in new or old position, fixed in repairs, complete all as specified & directed.

S&F PPR 20 mm bore bend in new or old position, fixed in repairs, complete all as specified & directed.

M&L for 25 mm bore cutting existing steel tubing for alteration or addition (Each cut to be measured seperately), complete all as specified.

M&L for 20 mm bore cutting existing steel tubing for alteration or addition (Each cut to be measured seperately),complete all as specified.

S&F 15 mm bore GI socket, Medium grade, in new or old, fixed in repairs, complete all as specified & directed.

S&F 20 mm bore GI socket, Medium grade, in new or old, fixed in repairs, complete all as specified & directed.

S&F 15 mm bore GI Nipple, Medium grade, 100 mm long, in new or old, fixed in repairs, complete all as specified & directed.

S&F 15 mm bore GI Nipple, Medium grade, 150 mm long, in new or old, fixed in repairs, complete all as specified & directed.

S&F 15 mm bore GI Nipple, Medium grade, 200 mm long, in new or old, fixed in repairs, complete all as specified & directed.

S&F 20 mm bore GI Nipple, Medium grade, 150 mm long, in new or old, fixed in repairs, complete all as specified & directed.

S&F 20 mm bore GI Nipple, Medium grade, 100 mm long, in new or old, fixed in repairs, complete all as specified & directed.

S&F 15 mm bore GI Union, Medium grade, 200 mm long, in new or old, fixed in repairs, complete all as specified & directed.

S&F 20 mm bore GI Union, Medium grade, 150 mm long, in new or old, fixed in repairs, complete all as specified & directed.

S&F 15 mm bore GI Tee, Medium grade, 200 mm long, in new or old, fixed in repairs, complete all as specified & directed.

S&F 20 mm bore GI Tee, Medium grade, 150 mm long, in new or old, fixed in repairs, complete all as specified & directed.

S&F 15 mm bore GI elbow, Medium grade, in new or old, fixed in repairs, complete all as specified & directed.

S&F 20 mm bore GI elbow, Medium grade, in new or old, fixed in repairs, complete all as specified & directed.

______BLANK_______

______BLANK_______

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tile to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge.

M & L Non-Skid coloured Ceramic tiles, first quality, 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed or bedding layer in Cement Mortar 1:4 for laying floor finishes complete all as specified and directed.

M & L glazed (coloured) ceramic tiles, first quality, of size (300 x200mm) x 7 mm thick, as on vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement as in dado, skirting etc to match with the shade of tiles including 10 mm thick rendering in Cement Mortar 1:3 on fair faces of brick work or concrete surfaces as in vertical surfaces for receiving tiles complete all as specified and directed.

Vitreous China wash down water closet pan and seat cover (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including P or S trap and including plastic water closet seat, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device, including connection to drain pipe (or out going pipe) and to flushing pipe, antisyphonage pipe, etc. including cast iron 'P' or 'S' trap for 100mm bore of pipe, fixed in repairs complete all as specified and as directed by Engr-in-Charge.

Horizon Construction Company

PADMA ENTERPRISES