Karnataka

Active

Works

Roads

Construction of Four Lane Road Bangarapet Bagepalli SH-05 from Ch.2.70km to 11.21km in Bangarpet taluk, Kolar District.

Public Works Department

PWD Division Office Kolar | Kolar, Karnataka

Amount: ₹29.9 CrCloses: 12 Jun 20267d left

Tender Value

₹29.9 Cr

EMD Value

₹29.9 L

Closing Date

12 Jun 2026, 9:30 pm7d left

Tender Inviting Organisation

Name

Public Works Department

Work Description

Construction of Four Lane Road Bangarapet Bagepalli SH-05 from Ch.2.70km to 11.21km in Bangarpet taluk, Kolar District.

Tender Information

Tender ID

301211

Reference Number

PWD/2026-27/RD/WORK_INDENT36119

Tender Type

Open

Product Category

Roads

Location

PWD Division Office Kolar

Source Website

Subscribe to view

Documents Required

7 documents required · 7 mandatory

Technical Bid

RequiredAnnual turnover certificate issued by Chartered accountant with UDIN Number for past 5 years i.e.,2021-22,2022-23,2023-24,2024-25&2025-26

RequiredValid PWD Registration certificate For Class I Contractor

RequiredWork done certificate issued by not below the rank of Executive Engineer

RequiredB Value Certificate

RequiredGST Registration Certificate

RequiredLine of Credit

RequiredAs per KW-4 Bid Document

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

The contractor shall maintain the road periodically during the DLP, including removal of jungle, shoulder, drains and cross drain works asper the site conditions &as per the directions of Engineer in charge of work.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

All the formats prescribed in the bid document shall be filled by the tenderer in complete manner otherwise it will be rejected

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of KPP portal due to internet connectivity issues and technical glitches at bidders end

Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder

Conditional tenders will not be accepted

The tenderer shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs

The cost of the Tender processing fee shall not be refundable

The employer is not responsible for any delay in accessing KPP Portal

In the case of the death of the contractor after executing the agreement / commencement of the work, his/her legal heir, if is an eligible registered contractor and is willing can execute and compete the work at the accepted tender rates irrespective of the cost of the work

The intending contractors are requested to note that they should abide by the detailed instructions and conditions contained in the Standard Tender documents KW-4 K.P.W.D. and further orders thereon

The successful Tenderer shall deliver to the Employer a Security deposit in any of the forms given Clause 29.1 of ITT for an amount equivalent to 5% of the Contract price plus additional security for unbalanced tenders in accordance with Clause 29.4 of ITT and Clause44 of the Conditions of Contract

Materials like steel, cement etc., required for the work shall be procured by the tenderer themselves and should got tested by the quality control authority before use on the work at their own cost.

The contractors assessed available tender capacity will be calculated as per the clause 3.6 of STD tender document Attached.

All the items in the tender including all lead, lifts, loading unloading, transportation, labor, hire charges of machinery curing for concrete works, cost and conveyance of all material and all other such incidental charges necessary for successful completion of works as per the detailed technical specification and direction of Engineer in charge of this work

Royalty on construction materials and other taxes will be deducted as per prevailing Govt orders.

As per Karnataka state Government order LD/300/LET/2006 Bangalore dated 01.01.2007and Government letter no PW/134/BMS/2007 dated 27.07.2007, a sum amounting to 1%of the bill amount will be deducted towards constructions labor welfare fund.

The employer reserves the rights to Reject or accept any or all the tenders without assigning any reasons

The difference amount and the percent security deposit submitted by the contractor for the project will be released upon completion of the defect liability period and receipt of the final bill

As per Government circular no: FD 355 EXP 12/2024 dtd 01.08.2024, Letter of Intent (LoI)will be issued in Karnataka Public Procurement Portal 2.0 software, contractor has to accept LOI online and submit the BG s through KPP portal within 20 days. if not tender will be rejected as per Guidelines.

All scanned documents to be uploaded shall be in original and the Executive Engineer reserves the right to verify the documents before approval. All the originals of uploaded documents in KPP portal should be produced within 7 working days from the date of opening of Technical Bid at the Division Office, failing which the tender is liable for rejection. No separate communication will be made in this regard, failing which action will be taken as per tender conditions and registration rules

All safety precautions, warning signs, night illumination, reflectors, deployment of security guards has to be ensured so that no untoward incident happens on account of negligence or any project activity. Contractor should indemnify the client to that extent

Formation levels and other data furnished are bare minimum the contractor should make all efforts to validate and to get additional data if required at his own cost

Contractor to that extent should submit HSE document defining all the procedure including the policies before execution of the project.

Contractor should take all precautionary measures to ensure that no damages caused to the existing structures which have been constructed by other agencies during project execution If any damages caused it has to be rectified at his own risk & cost

Further particulars, if any, required by the Contractor can be had from the office of the Executive Engineer, PWD Division, Kolar during office hours on all working days

The Bankers certificate should be in prescribed format which is enclosed separately

The units specifications against the item codes in BOQ to be referred as per UNI SR 2023-24continued to 2026-27 vol.1,2,3,5,6. The description in UNI 2023-24 continued to2026-27 vol1,2,3,5,6 are final.

Contractor should establish a fully functional laboratory at site at no extra cost in order to carry out all the required tests for the materials being used in the project.

Contractor should carryout additional test required to test the suitability of materials including borrow area before using the same either as sub-grade or base course materials.

When embankments are constructed disputes arising on account of damages to the existing field / channels, bunds and other private properties, if any, has to be resolved by the contractor. All precautions should be taken by the contractor so that there are no damages to such public private properties.

The tenderer who quotes amount less than amount put to tender should pay difference amount in the form of FDR purchased through any nationalized bank payable at KOLAR only in favor The Executive Engineer at the time of execution of the tender agreement

If any postponement of receipt date of tender, the same will be published in the KPP Portal portal

The contractor who participates in tenders for more than one work for which tenders are invited in this IFT, the tenderer must fulfill all the conditions and criteria cumulatively for the participated works

The returns submitted to the I.T. along with the Profit and Loss account statement should be uploaded for the financial turnover criteria attested by Chartered Accountant. The Turnover certificate should be obtained from the Chartered Accountant having UDIN number, if failed to satisfy the condition the tender will be Rejected

Contractor should execute the project with least impact to the environment especially during Cement concrete work.

MSME and NSIC Certificates are not valid as EMD payment as per GO.295/2019/ Dt. 26-03-2019.

For the vehicles/machineries/ equipments for which RTO registration is statutory,for such vehicles/machineries / equipments the contractor should upload the Registration Certificate documents issued by RTO. For Machineries and other equipments for which RTO registration is not applicable, for such machineries and equipments, purchase invoice document should be uploaded. If there is sale deed for such machineries and equipments, original invoice along with registered sale deed should be uploaded.

Contractors participating in the bid should submit Original Line of Credit of the copy uploaded through KPPP Portal with in one week after the last date of receipt of tenders. failing which their technical bids will be rejected.

LOC / K-form for the stipulated amount should be submitted in the format as prescribed in the bid document only. Otherwise tender is liable for rejection

The defect liability period for this project shall be two years. DLP Followed by the routine maintenance as per BOQ for subsequent 3 years

Estimate rates are excluding GST as per common SR 23-24 and prevailing GST (18% of amount put to tender) and in sanctioned estimate according to guidelines in common SR. hence GST will be paid separately for the quoted amount accordingly.

Contractors Should be registered with KPWD Class-1

The duration for completion of work is 18 months including monsoons

The Contractor should upload the Balance sheets that consists of Gross contract receipts for CIVIL Engineering works only

The Contractor should not have gone through Termination of any work

Technical Criteria

Past Experience

3.2 b. To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2021-22 to 2025-26 satisfactorily completed (At least 90% of the Contract Value) as a prime contractor at least ONE SIMILAR NATURE OF WORK Such as IMPROVEMENTS TO ROAD to an extent of 50% of the cost of the work of any construction work of value not less than Rs.1492.74 Lakhs (Past experience)Certified duly by the 0fficer not below the rank of Executive Engineer

Work Done Certificate

3.2 c. executed in any one year in the last five years i.e. 2021-22 to 2025-26, the following minimum 80% quantities of work: 1) EWE/Embankment/Subgrade/Earthen Shoulders in Cum-82733.00 2) GSB in Cum- 11474.00 3) WMM in Cum- 11095.00 4)BM/BC/DBM/SDBC-5822.00 Cum 5)PCC/RCC In Cum - 4596.00 5)Steel Reinforcement in MT -112.50 (80% of peak rate of construction)

Work Done Certificate

Capabilities of Vendor

Owning the following key and critical equipment for this work (minimum capacity of 40/60 TPH ) Hot mix plant/Batch Mix Plant 1 No, Static road roller 1 No. Vibratory road roller 1 No. Mechanical Paver finisher 1 No. Tippers 2 Nos Concrete Batching Plant 1 No.

Others -- Own Machineries

Financial Status

3.1All Tenderers shall provide the requested information accurately and in sufficient detail in Section 3 Qualification information. 1.To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2021-22 to 2025-26 achieved in at least two financial years a minimum financial turnover(in all classes of civil engineering construction works only) of Rs.3970.68 Lakhs Financial Status(Certificate from CA with UDIN Number, if Failed to satisfy the condition tender will be rejected) (The turn over certificate shall have UDIN generated through ICAI Portal. Turn over certificate without UDIN will not be considered and treated as invalid. The confirmation letter issued by Chartered Accountant shall also have UDIN generated through ICAI Portal)

Audited CA Certificate of Annual Turnover

Liquid assets and /or availability of credit facilities of no less than Rs.497.58 Lakhs (estimated cash flow for 3 months of peak construction period)

Others -- LINE OF CREDIT

Balance sheet for the past five years stating the gross civil engineering contract reciepts.The balance sheet uploaded should be auidted by the Chartered Account and should consist of valid UDIN Number

Audited CA Certificate of Annual Turnover

The Contractor should upload the GST returns (GSTR-3B / GSTR-9) , Income Tax Return (ITR) filed for the relevant assessment year(s) and matches with the Year-wise statement of gross civil engineering contract receipts

GST Registration

Others

Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Others -- Not required

Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Others -- Not required

Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)

Others -- Not required

Total value of civl engineering works executed and payments received in the last five years (year-wise)

Others -- Not required

List of existing commitments and ongoing works

Others -- For B value

List of works for which tenders already submitted

Others -- For B value

Banker Details for reference

Others -- BANK PHONE NUMBER AND ADDRESS

Reports on the financial standing of the tenderer, such as profit and loss statements and auditors reports for the last five years

Others -- Reports on the financial standing of the tenderer, such as profit and loss statements and auditors reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

Others -- Not required

List of Financial Resources with Certificates

Others -- Not required

Construction equipment on lease or hire basis by the tenderer and equipment proposed to be deployed on this contract, if awarded ( Wet mix plant/pugmill 1 No, Truck mounted bitumen sprayer 1 No, Motor Grader 1 No, Excavator 0.90 cum bucket capacity 1 No, Tipper Trucks 2 Nos, Self-Loading Concrete mixer 2m3 capacity 1 No, Water Tanker 2 Nos)

Others -- machineries on lease or hire basis

Work Locations

Fee & Financial Details

Tender Fee Amount

₹7,500

EMD Fee Amount

₹29.9 L

Important Dates

Last Activity

27 May 2026

Published

27 May 2026

Bid Opening

15 Jun 2026

Download Ends

11 Jun 2026

Pre-Bid Meeting

10 Jun 2026

BOQ Preview

•

Construction of Four Lane Road Bangarapet Bagepalli SH-05 from Ch.2.70km to 11.21km in Bangarpet taluk, Kolar District.

•

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut ...

•

Pavement Milling - Milling of existing Bituminous surface to a specified depth up to 40mm using Milling machine including disposal of removed material. ---- With all leads and lifts c...

•

Compacting Original Ground - Compacting original ground supporting embankment - Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of emba...

•

Mechanical Means -

•

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm a...

•

Construction of Embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded with desired compaction. (R...

•

Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transporta...

•

Construction of Subgrade and Earthen Shoulders - Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting...

•

Granular Sub-Base - Plant Mix Method - Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material...

•

Wet Mix Macadam (Plant Mix Method) - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC ...

•

Prime Coat over WMM/WBM - Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying ...

•

Tack coat on Granular surface treated with primer - Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.25 kg/m2 on Granular Surface. R...

•

Dense Graded Bituminous Macadam Grading - II for traffic >20 MSA - Providing and laying Dense Graded Bituminous Macadam with 40/60 TPH capacity HMP using crushed aggregates of specified gradi...

•

Bituminous Concrete Grading II for traffic >20 MSA - Providing and laying Bituminous Concrete with 40/60 TPH capacity hot mix plant using crushed aggregates of specified grading, pre...

•

Removal of stumps and roots including backfilling with suitable material to required compaction - Girth from 300 mm to 600 mm. Ref to MoRT&H : IRC - 201 ---- With all leads and lifts cost and conveyan...

•

Removal of stumps and roots including backfilling with suitable material to required compaction - Girth from 900 mm to 1800 mm. Ref to MoRT&H : IRC - 201 ---- With all leads and lifts cost and conveya...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coars...

•

Construction of Median and Island with Soil Taken from Roadway Cutting - Construction of Median and Island above road level with approved material deposited at site from ...

•

Painting on concrete surface - Providing and applying 2 coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and apply...

•

Precast Cement Concrete Interlocking Blocks - Providing and laying 100mm thick factory made precast M -40 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Commercial Traffic ...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...

•

Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface - Providing and laying of hot applied thermoplastic compound 2.5 mm thick including ref...

•

Providing and Fixing Logo of PMGSY Project - Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing.

•

i) The board will be a composit...

•

Supplying and Fixing of Molded Shank Raised Pavement Markers / Cats Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total int...

•

Direction and Place Identification Signs upto 0.9 m2 Size Board. - Providing and erecting direction and place identification retro- reflectorised sign as per IRC:67:2022 made of high intensity...

•

Surface Drains in Soil - Construction of unlined surface drains of average cross- sectional area 0.40 m2 in soil to specified lines, grades, levels and dimensions. Excavated mate...

•

Tack coat on Bituminous surface - Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.20 kg/m2 on the prepared bituminous surface clean...

•

Retro-Reflectorised Traffic Signs - Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class B Type IV ret...

•

Road Delineators - Supplying and installation of delineators (road way indicators, hazard markers, object markers), 80-100 cm high above ground level, painted black and white in 15 cm wide strips, fit...

•

Kilometre Stone - Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc - Ordinary kilometer ston...

•

Kilometre Stone - Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc - 200 m stone (precast). ...

•

Kilometre Stone - Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc - 5th kilometre stone (pr...

•

Providing and Fixing of Median Marker that are made of tough, high impact resistant, injection-molded, thermoplastic body with an isosceles trapezoidal structure of length, width...

•

Pedestrian Crossings as per IRC 99-2018 - Providing Speed Breakers/Raised pedestrian crossings in Trapezoidal section with 2.5 m Top width and transition length of 0.8 m length and height of...

•

Improvements to Junctions from 4.60km to 10.65km of Bangarapet Bagepalli SH-05 Road in Bangarpet taluk, Kolar District.

•

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut ...

•

Scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material by Mechanical Means using Hydraulic excavator with in all lifts and lead. Ref to MoRT&H : IRC - 3...

•

Mechanical Means -

•

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm a...

•

Granular Sub-Base - Plant Mix Method - Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material...

•

Wet Mix Macadam (Plant Mix Method) - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC ...

•

Construction of Subgrade and Earthen Shoulders - Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting...

•

Prime Coat over WMM/WBM - Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying ...

•

Dense Graded Bituminous Macadam Grading - II for traffic >20 MSA - Providing and laying Dense Graded Bituminous Macadam with 40/60 TPH capacity HMP using crushed aggregates of specified gradi...

•

Bituminous Concrete Grading II for traffic >20 MSA - Providing and laying Bituminous Concrete with 40/60 TPH capacity hot mix plant using crushed aggregates of specified grading, pre...

•

Construction of Box Cell Culvert at Ch.7.50km of Bangarapet Bagepalli SH-05 in Bangarpet taluk, Kolar District.

•

Dismantling of Structures - Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, inc...

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Painting Two Coats on New Concrete Surfaces - Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces. Ref to MoRT&H : IRC - 8...

•

Providing and laying of Filter media with granular materials/ stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of ...

•

Back filling behind abutment, wing wall and return wall complete including compaction as per drawing and Technical Specification - Granular material. Ref to MoRT&H : IRC - 710.1...

•

Printing New Letter and Figures of any Shade - English and Roman. Ref to MoRT&H : IRC - 801 ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of ...

•

Construction of Box Cell Culvert at Ch.3.35km, 3.90km, 5.55km, 8.90km, 10.30km (1 Vent 2x1.5m) of Bangarapet Bagepalli SH-05 in Bangarpet taluk, Kolar District.

•

Dismantling of Structures - Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, inc...

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

PCC M15 Grade leveling course below approach slab complete as per drawing and Technical specification. Ref to MoRT&H : IRC - 2700 ---- With all leads and lifts cost and conveyance of all materials, co...

•

Painting Two Coats on New Concrete Surfaces - Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces. Ref to MoRT&H : IRC - 8...

•

Providing and laying of Filter media with granular materials/ stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of ...

•

Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and ...

•

Providing Size Stone masonry with hard stone in foundation & plinth with

•

Cement mortar 1:6 (1 cement : 6 coarse sand) ---- With all leads and lifts cost and conveyance of all materials, cost of labour...

•

Boundary pillar / Guard Stone - Reinforced cement concrete M15 grade boundary pillars of standard design as per IRC:25, fixed in position including finishing and lettering but excluding...

•

Back filling behind abutment, wing wall and return wall complete including compaction as per drawing and Technical Specification - Granular material. Ref to MoRT&H : IRC - 710.1...

•

Construction of Box Cell Culvert at Ch.8.39km, 8.5km (1 Vent 4x1.5m) of Bangarapet Bagepalli SH-05 in Bangarpet taluk, Kolar District

•

Dismantling of Structures - Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, inc...

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Providing Size Stone masonry with hard stone in foundation & plinth with

•

Cement mortar 1:6 (1 cement : 6 coarse sand) ---- With all leads and lifts cost and conveyance of all materials, cost of labour...

•

Painting Two Coats on New Concrete Surfaces - Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces. Ref to MoRT&H : IRC - 8...

•

Providing and laying of Filter media with granular materials/ stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of ...

•

Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and ...

•

Boundary pillar / Guard Stone - Reinforced cement concrete M15 grade boundary pillars of standard design as per IRC:25, fixed in position including finishing and lettering but excluding...

•

Back filling behind abutment, wing wall and return wall complete including compaction as per drawing and Technical Specification - Granular material. Ref to MoRT&H : IRC - 710.1...

•

Construction of Box Cell Culvert at Ch.4.5km (1 Vent 2.0x2.0m) of Bangarapet Bagepalli SH-05 in Bangarpet taluk, Kolar District

•

Dismantling of Structures - Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, inc...

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Reinforced cement concrete M30 grade for approach slab including reinforcement and formwork complete as per drawing and Technical specification (Batching Plant). Ref to MoRT&H : IRC - 15...

•

Painting Two Coats on New Concrete Surfaces - Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces. Ref to MoRT&H : IRC - 8...

•

Providing and laying of Filter media with granular materials/ stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of ...

•

Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and ...

•

Boundary pillar / Guard Stone - Reinforced cement concrete M15 grade boundary pillars of standard design as per IRC:25, fixed in position including finishing and lettering but excluding...

•

Back filling behind abutment, wing wall and return wall complete including compaction as per drawing and Technical Specification - Granular material. Ref to MoRT&H : IRC - 710.1...

•

Construction of Box Cell Culvert at Ch.4.7km (1 Vent 3.0x2.5m) of Bangarapet Bagepalli SH-05 in Bangarpet taluk, Kolar District

•

Dismantling of Structures - Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, inc...

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Reinforced cement concrete M30 grade for approach slab including reinforcement and formwork complete as per drawing and Technical specification (Batching Plant). Ref to MoRT&H : IRC - 15...

•

Painting Two Coats on New Concrete Surfaces - Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces. Ref to MoRT&H : IRC - 8...

•

Providing and laying of Filter media with granular materials/ stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of ...

•

Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and ...

•

Boundary pillar / Guard Stone - Reinforced cement concrete M15 grade boundary pillars of standard design as per IRC:25, fixed in position including finishing and lettering but excluding...

•

Back filling behind abutment, wing wall and return wall complete including compaction as per drawing and Technical Specification - Granular material. Ref to MoRT&H : IRC - 710.1...

•

Construction of Box Cell Culvert at Ch.6.7km (2 Vent 3.0x3.0m) of Bangarapet Bagepalli SH-05 in Bangarpet taluk, Kolar District

•

Dismantling of Structures - Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, inc...

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Reinforced cement concrete M30 grade for approach slab including reinforcement and formwork complete as per drawing and Technical specification (Batching Plant). Ref to MoRT&H : IRC - 15...

•

Painting Two Coats on New Concrete Surfaces - Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces. Ref to MoRT&H : IRC - 8...

•

Providing and laying of Filter media with granular materials/ stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of ...

•

Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and ...

•

Providing Size Stone masonry with hard stone in foundation & plinth with

•

Cement mortar 1:6 (1 cement : 6 coarse sand) ---- With all leads and lifts cost and conveyance of all materials, cost of labour...

•

Boundary pillar / Guard Stone - Reinforced cement concrete M15 grade boundary pillars of standard design as per IRC:25, fixed in position including finishing and lettering but excluding...

•

Back filling behind abutment, wing wall and return wall complete including compaction as per drawing and Technical Specification - Granular material. Ref to MoRT&H : IRC - 710.1...

•

Construction of Box Cell Culvert at Ch.7.9km (1 Vent 3.0x1.50m) of Bangarapet Bagepalli SH-05 in Bangarpet taluk, Kolar District

•

Dismantling of Structures - Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, inc...

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Reinforced cement concrete M30 grade for approach slab including reinforcement and formwork complete as per drawing and Technical specification (Batching Plant). Ref to MoRT&H : IRC - 15...

•

Painting Two Coats on New Concrete Surfaces - Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces. Ref to MoRT&H : IRC - 8...

•

Providing and laying of Filter media with granular materials/ stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of ...

•

Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and ...

•

Boundary pillar / Guard Stone - Reinforced cement concrete M15 grade boundary pillars of standard design as per IRC:25, fixed in position including finishing and lettering but excluding...

•

Back filling behind abutment, wing wall and return wall complete including compaction as per drawing and Technical Specification - Granular material. Ref to MoRT&H : IRC - 710.1...

•

PIPE CULVERTS - Providing and Laying Reinforced Cement Concrete Pipe NP3 as per design in Single Row - Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding...

•

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting Each deposited layer by ramming after watering with a lea...

•

Construction of Utility Duct of Size 1.50m x 1.50m of Bangarapet Bagepalli SH-05 in Bangarpet taluk, Kolar District

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED)

•

pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work ...

•

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each depos...

•

Mechanical Means -

•

Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of ...

•

Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...

•

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting Each deposited layer by ramming after watering with a lea...

•

Estimate for Shifting of HT/LT/25/63/100kVA line and DTCs as peer requset of AEE,PWD,Bangarpet subDivision from S N Resort to Dhimba Gate in Bangarpet O &M 3 Section ,Bangarpet Sub Division

•

Supplying and Errection of Spun pole 11 Mtr Long as per BESCOM Specification. ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equi...

•

Providing Concreting materials for 11 Mtrs

•

Spun Pole - Base concreting 1:2:4,

•

1000x1000x150 mm as per BESCOM

•

Specification. ---- With all leads and lifts cost and conveyance of all materials, cost of ...

•

Providing Concreting materials for 11 Mtrs

•

Spun Pole - Pole concreting 1:2:4,

•

1000x1000x2500 mm as per BESCOM

•

Specification. ---- With all leads and lifts cost and conveyance of all materials, cost of...

•

Providing Concreting materials for 11 Mtrs

•

Spun Pole - Coping 1:2:4 (as per actuals] as

•

per BESCOM Specification. ---- With all leads and lifts cost and conveyance of all materials, cost of labour, cu...

•

Supplying and fixing of Special Cross Arm

•

with Cross Arm for EG Stirrups,

•

braces, clamps, bolts nuts and washers

•

complete as per BESCOM Specification. ---- With all leads and lifts cost and conveyance...

•

Releasing and Re- erection of 3 Phase,

•

11kV/433V, 25 kVA BEE 4/5 Star Rated

•

Single Pole Mounted Transformer

•

Centre on 9 Mtr RCC Pole (Square

•

Section) as per BESCOM

•

Specification.[Rs.17685 x1.9 =33601....

•

Releasing and Re-Erection of 3 Phase,

•

11kV/433V, 25 kVA BEE, 4/5 Star Rated

•

Distribution Transformer Centre Using 9

•

Mtr RCC Pole DPT as per BESCOM

•

Specification. (Rs.18669.00x1.9 = 35471.10) ---- With...

•

Releasing and Re- erection of 3 Phase,

•

11kV/433V, 63 kVA BEE, 4/5 Star Rated

•

Distribution Transformer Centre Using 9 Mtr

•

RCC Pole DPTC as per BESCOM

•

Specification.[Rs.19095.00 x1.9 = 36147.50

•

Releasing and Re- Erection of 3 Phase,

•

11kV/433 V, 100 kVA BEE, 4/5 Star Rated

•

Distribution Transformer Centre Using 9

•

Mtr RCC Pole DPTC as per BESCOM

•

Specification.[Rs.19095.00 x1.9 = 36280.50 ] ----...

•

Releasing and Re- Erection of 2 Pole

•

Structrue at the Tapping Point Using RCC

•

Pole as per BESCOM Specification.

•

[Rs.7784.00 x1.9 = 14789.60 ] ---- With all leads and lifts cost and conveyance of all m...

•

Supplying and fixing of 11 kV, Horizontal

•

Cross Arm with HT Single Top supports,

•

clamps, bolts, nuts & washers - MS - For RCC

•

Pole as per BESCOM Specification. ---- With all leads and lifts cost and c...

•

Supplying and fixing of LT 4 Pin Cross Arm

•

with clamps, bolts, nuts & washers with

•

brace - MS For RCC Pole as per BESCOM

•

Specification. ---- With all leads and lifts cost and conveyance of all materia...

•

Supplying and fixing of LT 2 Pin Cross Arm

•

with clamps, bolts, nuts & washers with

•

braces - MS for RCC Pole as per BESCOM Specification. ---- With all leads and lifts cost and conveyance of all materi...

•

Supplying and fixing of Rabbit ACSR Conductor as per BESCOM Specification. ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipme...

•

Supplying and fixing of 11 kV, 5 KN Polymeric

•

Pin Insulator (24 mm Dia FRP

•

Rod) as per BESCOM Specification. ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing,...

•

Supplying and fixing of 11 kV, 45 KN

•

Polymeric Insulator as per BESCOM

•

Specification. ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machin...

•

Supplying and fixing of No. 8 Strain Insulator

•

as per BESCOM Specification. ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery equipm...

•

Supplying and fixing of 1.1 kV Pin Insulator with

•

GI Pin as per BESCOM Specification. ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machin...

•

Supplying and fixing of Pole clamp for HT/LT AB

•

cable as per BESCOM Specification. ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery...

•

Supplying and fixing of Suspension Clamp

•

Assembly suitable for 70 sqmm insulated massanger (Excluding pole clamp &

•

Eye Hook ) as per BESCOM Specification. ---- With all leads and lifts cost and convey...

•

Supplying and fixing of Dead End Clamp/Anchor

•

Clamp Assembly 16 to 70 Sqmm (excluding pole

•

clamps and Eye hook) as per BESCOM

•

Specification. ---- With all leads and lifts cost and conveyance of all ma...

•

Supplying and fixing of 11 kV, 3 Phase Aerial

•

Bunched Cable 3x95 + 70 Sqmm as per BESCOM

•

Specification. ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire...

•

Supplying and Fixing of V-Shape/Horizontal cross

•

arm including Single Top Support Brace and

•

Insulator fixing as per BESCOM Specification. ---- With all leads and lifts cost and conveyance of all mater...

•

Releasing and Refixing of LT 4 Pin Cross Arm with

•

clamps, bolts, nuts & washers with brace - GI as per BESCOM Specification. ---- With all leads and lifts cost and conveyance of all materials, cost of...

•

Releasing and Refixing of PSCC Pole - 9 Mtr Long,

•

300 Kg WL as per BESCOM Specification. ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of mac...

•

Releasing and Re restinging of Rabbit ACSR

•

Conductor as per BESCOM Specification ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire charges of machinery e...

•

Supplying and Fixing of Guy Set Complete with

•

No. 15 Strain Insulator as per BESCOM

•

Specification. ---- With all leads and lifts cost and conveyance of all materials, cost of labour, curing, hire char...

•

Providing guarding for HT&LT Lines at Road crossing ,Telephone line crossing etc,.up to span of 60M[Including labour for fixing of necessary cross arms][Rs.78.00 Per mtr x 60 Mtr span =4680.00] ---- W...

•

Estimates for periodicity of routine Maintenance Activities for Third Year

•

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut ...

•

Maintenance of Drains - The maintenance of drains include erosion, repair, clearing, cleaning, reshaping, regrading, deepening of side drains as well as catch water drains as per technical speci...

•

Maintenance of Earth Shoulder (stripping excess soil) - Stripping excess soil from the shoulder surface to achieve the approved level and compacting with plate compactor. Ref to MoRT&H : IRC - 3003 --...

•

Maintenance of Earthen Shoulder (filling with fresh soil) - Making up loss of material/ irregularities on shoulder to the design level by adding fresh approved soil and compacting it with app...

•

Maintenance of Road Signs - Maintenance of road signs by way of cleaning and repainting of mandatory / requlatory / cautionary / informatory and place identifications sign board as ...

•

Mechanical Means -

•

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm a...

•

Painting Two Coats on New Concrete Surfaces - Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces. Ref to MoRT&H : IRC - 8...

•

Patching of Potholes - Patching of Shallow Potholes using SDBC Gr II 25 mm thick - Patching of shallow potholes on asphalt surfaces by using Semi Dense Bituminous Concrete 25mm thickness. The ...

•

Estimates for Road Maintenance - Activities to be carried out for the Fourth Year.

•

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut ...

•

Maintenance of Drains - The maintenance of drains include erosion, repair, clearing, cleaning, reshaping, regrading, deepening of side drains as well as catch water drains as per technical speci...

•

Maintenance of Earthen Shoulder (filling with fresh soil) - Making up loss of material/ irregularities on shoulder to the design level by adding fresh approved soil and compacting it with app...

•

Mechanical Means -

•

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm a...

•

Patching of Potholes - Patching of Shallow Potholes using SDBC Gr II 25 mm thick - Patching of shallow potholes on asphalt surfaces by using Semi Dense Bituminous Concrete 25mm thickness. The ...

•

Estimate for Road Maintenance - Activities to be carried out for the Fifth Year.

•

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut ...

•

Maintenance of Drains - The maintenance of drains include erosion, repair, clearing, cleaning, reshaping, regrading, deepening of side drains as well as catch water drains as per technical speci...

•

Maintenance of Earthen Shoulder (filling with fresh soil) - Making up loss of material/ irregularities on shoulder to the design level by adding fresh approved soil and compacting it with app...

•

Mechanical Means -

•

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm a...

•

Patching of Potholes - Patching of Shallow Potholes using SDBC Gr II 25 mm thick - Patching of shallow potholes on asphalt surfaces by using Semi Dense Bituminous Concrete 25mm thickness. The ...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

36119 KW4 Bid.doc

Tender Document • 0.31 MB

Ready to Participate?

Download all tender documents and submit your bid

Construction of Four Lane Road Bangarapet Bagepalli SH-05 from Ch.2.70km to 11.21km in Bangarpet taluk, Kolar District.

Market Intelligence

Tender Inviting Organisation

Work Description

Tender Information

Documents Required

Eligibility Criteria

Technical Criteria

Work Locations

Fee & Financial Details

Important Dates

BOQ Preview

Documents

NIT Documents

Ready to Participate?