Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.3 LAccepted-AOC NEAR RAILWAY STATION UTARLAI BARMER RAJASTHAN PIN 344001 | BARMER | RAJASTHAN | 344001 | L1 | Accepted-AOC AOC | |
| 2 | L2₹31.7 L+₹2.3 L (7.98%)Rejected-Finance | L2 | Rejected-Finance Highest | |
| 3 | L3₹35.4 L+₹6.0 L (20.5%)Rejected-Finance | L3 | Rejected-Finance Highest |
Tender Value
₹43 L
EMD Value
₹86,000
Closing Date
17 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE ARMY BARMER
Military Engineer Services, Jalipa Military Station, Garrison Engineer (Army), Barmer, PIN 344001
SPL REPAIR TO BLDG NO P 148 P 149 AND 02 X VEHICLE SERVICING AND WASHING RAMP NEAR BUILDING NO P 126 AT JASAI MIL STN UNDER GE ARMY BARMER
2022_MES_563648_1
8678/E8
Open Tender
Civil Works
Item Rate
180 days
GE ARMY BARMER
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE ARMY BARMER
₹86,000
30 Jan 2023
19 Nov 2022
24 Dec 2022
19 Nov 2022
17 Dec 2022
3 Dec 2022
Amount
Taking down cement plaster on stone masonry/Brick Masonry incl racking out joints, hacking for key scrubbing down with water complete all as specified and directed .
M&L for Plastering 15mm thick in two layers on brick work,concrete surface 1st coat is 10mm thick in CM(1:6) second coat of plaster which is 5mm thick in CM(1:4)(external wall surface) finishing the surface even & smooth with mixing of water proofing compund in as per manufacture instructions complete all as specified and directed. Water proofing compund shall be measured and paid sepeartely as supply only rate.
M&L for 15 mm rendering in CM 1:6 on fair face of wall or on concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.
M&L for 5 mm rendering in CM 1:3 on fair face of ceiling or on concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.
M&L for Preparing new surface of wall (plastered) and applying Three coat of white Wash on wall of approved tints complete all as specified and directed .
M&L for Preparing of new plastred/unplastred surfaces of walls and applying Two coat of cement base paint over one coat of Primer as camouflage pattern as per manufacturers' instructions complete all as specified and directed .
M&L for Preparing New plaster surface and applying Three coat of White wash on ceiling of approved tints complete all as specified and directed .
Demolition of cement concrete ( unreinforced) in roofs , floors (other than ground floors) beams, staircases,landing, chajjas and similar suspended work complete all as specified and directed
M/L plain cement concrete 1:2:4 type B0 using 12.5 mm graded aggregate as in roof for maint. the uniform slope etc any thickness at any height and in any position complete all as specified and directed.
Supply only liquid water proofing compound( ISI Marked)
M&L APP based polymeric modified membrane minimum weighing not less than 3kg / Sqm and minimum 3mm thick reinforced with polyester non woven fabric weight not less than 150 gms / Sqm and on primed surface of one coat of approved bituminous [email protected] Ltr per Sqm by torch application method with 150mm over lap on length side & 100mm on width side complete all as specified and directed.
M&L Cement concrete tiles 20cm x 20xm x20mm thick, machine pressed; set, jointed and pointed in net cement shurry with grey cement and no pigment in Roof,(Over 15 mm thick Screed bed CM 1:6) and cut and polished complete all as specified and directed.
Supply only Integral water proofing compund( for screed bed ).
M&L for taking down complete removal of existing treatment and preparing of old painted surfaces of walls and applying two coat of cement base paint as camouflage pattern over one coat of primer complete all as specified and directed.
M&L for complete removal of existing treatement and preparing of old plastered surfaces of wall by washing, rubbing down and stopping of distempered, printed surfaces and applying Two coat of White wash on wall of approved tints complete all as specified and directed.
M&L for complete removal of existing treatement of Ceiling and preparing of old plastered surface by washing, rubbing down and applying One coat of White wash on ceiling of approved tints complete all as specified and directed.
M and L for preparation of old decorated steel surfaces of any description, not otherwise described over 10cm width & girth and applying two coats of synthetic enamel paint as camouflage pattern complete all as specified and directed.
Demolition of concrete in ground floors and paving exc 15cm thickness (below or above ground level ) complete all as specified and directed.
M&L 100mm thick cement concrete type D-2, 1:4:8 (40mm graded crushed stone aggregate) finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.
M&L 100 mm thick cement concrete type B-1, 1:2:4 ( 40 5mm graded crushed stone aggregate) finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.
Demolition of brickwork or stone/boulder masonary,built in cement mortar or lime mortar complete all as specified and directed.
M&L for precast cement concrete block masonary with solid block of type C-1, 1:3:6 (20mm graded aggregates),exc. 10 Cm in width and set in CM 1:6 complete all as specified and directed.
M&L for 15mm thick plastering on external wall surface in cement mortar 1:4 finished even and smooth without using extra cement on stone masonry surface complete all as specified and directed.
M & L for hardcore of gauge exc 63 mm but n exc. 100 mm, deposited, spread and lev-elled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed.
M&L PCC 1:4:8 type D2 by using 40mm graded stone aggregate as in foundations filling and mass concrete complete all as specified and directed.
M&L PCC (1:2:4) type B-1 (using 20mm graded stone aggregates) as in coping,benching/channels of manholes/drain etc including demolition of existing pcc etc complete all as specified and directed.
Demolition of Reinforcement cement concrete in roofs,floors (other than ground floors),beams,staircases,landing,chajjas and similar suspended work complete all as specified and directed.
M&L for RCC M-25 design mix as in slabs supported on walls, beams and colunms in floors,roofs, landings, balconies, canopies, deck slabs and in shelves and the like even and smooth without using extra cement complete all as specified and directed.
Use and waste formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide includingrough finished surfaces complete all as specified and directed.
Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick [horizontal or sloping] including fair finished surfaces complete all as specified and directed.
M&L for TMT steel bars of 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and as directed.
M&L for TMT steel bars of 6mm to 8 mm dia and , cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and directed.
Dismantling and taking up/down the unserviceable LT UG cable any size and any type complete all as specified and directed.
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 4 core complete all as specified and directed.
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core complete all as specified and directed.
M & L for Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for laying of cables, erection of poles, struts/stays, leveling of yard etc not exceeding 10 M² on plan and not exceeding 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.
M&L for unwashed river sand cushioning to U/G cable and punning for cushioning of cable 8cm below the cable and 15cm above cable complete all as specified and directed. Note :- Thickness after punning shall not be less then 18 cm. Punned thickness shall only be museared and paid.
M&L 40 to 50mm thick rough dressed Jodhpur type stone slab cover 25 to 30 cm wide and not less than 60 cm in length, laid dry abutting each other with gap between adjacent slab not exceeding 10 mm over under ground cable protection complete all as specified and directed.
M & L for Returning, filling in, including spreading, leveling watering and well ramming in layers n.exc 25 cm in soil complete all as specified and directed.
M & L for Removing of excavated soil not exc. 50 M from starting points complete all as specified and directed .
Supply and fix LED Flood light fitting, 100 Watts, 230 V, 50 HZ, suitable for operation over voltage range of 140 V to 270 V, duly housed in pressure die cast aluminium housing with toughned glass, comprising of LED with individual optical lens, electronic driver with THD <10%, efficacy >110LPW and PF more than 0.90, confirming to IP66, rendering color index of > 75 with cool day/ warm white light output.incl. suitable size three core aluminium conductor PVC cable from gear / control box to fitting through PVC conduit or along with suitable size three core aluminium conductor for connection of street light fitting to LT OH line / Junction Box etc complete all as specified and directed. MAKE :- Cat Part No. ROVER PRO of Crompton or equivalent in Philips/ Wipro.
Disconnecting and taking down the unserviceable LT Panel box complete incl. old U/S switchgears of any make and any type complete all as specified and directed .
Supply, install, testing and commissioning of LT Panel board, outdoor type, floor mounted, factory made (CPRI approved) suitable for 415 volt, 3 PH, 4 wire, 50 HZ, AC supply system having bus bars chamber with copper bus bars of rating 200 amps duly insulated by insulation of RYB colour 200 Amps rating mounted on porcelain insulators. The panels shall be factory made, double door, made out of 3.00 mm thick MS sheet totally enclosed dust, vermin and rust proof front operated, front and rear opening with locking arrangement fixed with MS angle iron frame of size 40X40X5 mm including embedding the panel in PCC platform and duly painted with two coats of synthetic enamel paint over a coat of red oxide primer with colour as directed including internal wiring with multistranded copper conductor cable of suitable size incl lugs and cable gland to incoming and outgoing cable with 3 hinges to panel doors and locking arrangement as desired complete all as specified and directed and comprising of the following:- (A) IN COMING (a) MCCB 63 Amps 4 pole 16 KA TM type including accessories like spreaders, nut bolt etc -01 No (b) RYB indicating lamp LED type suitable for panel mounting (Set of three) - 01 No. (c) Panel mounted multi function energy (voltmeter & ammeter) meter of accuracy CL-1.0 rating including CT - 01 No (B) OUT GOING (a) DOL Starter suitable for 3 phase, 415 volts, 50 HZ suitable for 2 HP.-02 Nos. (b) MCB TPN 'C' Curve,63 Amps, 10 KA-02 Nos (c) MCB SPN 'C' Curve,40 Amps, 10 KA-02 Nos
Supplying, laying , jointing and testing in replacement GI tubes, medium grade (ISI marked), galvanized iron with and including all fitting (ISI marked) such as bends, tees, sockets, nipples & unions, flanges etc laid in trenches/fixed to wall/fixed on pillars etc complete all as specified and as directed of size 80 mm (3”) dia.
Supply, install, testing and commissioning of LT Panel board, outdoor type, gable roof, floor mounted, factory made (CPRI approved) suitable for 415 volt, 3 PH, 4 wire, 50 HZ, AC supply system having bus bars chamber with copper bus bars of rating 400 amps duly insulated by insulation of RYB colour 400 Amps rating mounted on porcelain insulators. The panels shall be factory made, double door, made out of 3.00 mm thick MS sheet totally enclosed dust, vermin and rust proof front operated, front and rear opening with locking arrangement fixed with MS angle iron frame of size 40X40X5 mm including embedding the panel in PCC platform and duly painted with two coats of synthetic enamel paint over a coat of red oxide primer with colour as directed including internal wiring with multistranded copper conductor cable of suitable size incl lugs and cable gland to incoming and outgoing cable with 3 hinges to panel doors and locking arrangement as desired complete all as specified and directed comprising of the following:- (a) MCCB 160 Amps 4 pole 25 KA TM type including accessories like spreaders, nut bolt etc -01 No (b) On Load Change Over Switch capacity 160 Amps.-01 No (c) RYB indicating lamp LED type suitable for panel mounting (Set of three) - 01 No. (d) Panel mounted voltmeter & ammeter of accuracy CL-1.0 rating including CTs - 01 No
M&L in replacement of Earthing complete with galvanized steel earth plate electrodes 60cmx60cmx6 mm thick buried directly in ground earth (earth pit not less 2.25 m deep below ground level) with top edge of the plate not less then 1.5 mtr below normal ground level connected to galvanised iron earthing strip 32mm x6mm thick by means of bolt nuts check nuts and washers of galvanized iron or steel all as specified & shown in electrical plate No.3 of MES SSR part-I 2009 connected to earth test point as specified and testing on completion including provision of 40 mm dia light grade pipe up to 7.5 mtr length as protection & watering pipe shall be 20 mm bore medium grade including all excavation & earth work in any type of soil incl PCC pit (1:3:6) type C-1 with RCC cover including charcoal , salt, funnel, all as directed at site.
Taking down carefully from roof/ wall of the building loose/ hanging/ de-shaped, aluminium strips of any size & type including unserviceable insulators etc complete all as specified and directed.
Refixing serviceable aluminium strips of any size as obtained from above with porcelin insulators of 15 BMD size 'T' type placed not more than 50cm apart with screws /nut/bolts etc complete all as specified and directed.
S & F aluminium strip 25mm x 3.15mm fixed with saddles & fixing screws of size not less than 4 mm dia and 32 mm long for roof conductors and down conductors above ground with porcelin insulators of 15 BMD size 'T' type placed not more than 50cm apart with screws /nut/bolts etc complete all as specified and directed.
M&L for Test point terminal block made of gun metal or phosphorus bronze size 75 mm X75 mm X25mm drilled and screwed including 4 nos. 8mm dia 25 mm long hexagonal head brass screws, and screwed to wall for protection of test point including 80 mm x 80 mm x 40 mm PVC box for Gun made block fix to the wall by means of screws and nuts including taking down old unserviceable test terminal point complete all as specified and directed .
M&L for Air termination, single pointed, Aluminium rod 12mm dia and 300mm long fixed with the roof in and including all fittings, fixtures including taking down old unserviceable Air termination rod of any size complete all as specified and directed .
Taking down carefully from wall / surface of the building loose/ hanging/ de-shaped, GI strip of any size type including unserviceable Galvanised iron pipe of any dia bore complete all as specified and directed .
Refixing serviceable GI strips of any size as obtained from item above with GI pipe of any size on wall/floor with clamps and nuts and bolts of suitable size etc complete all as specified and directed .
M&L Galvanised iron strip 32 mm x 6 mm burried in ground/PCC hard standing /fixed on wall including all necessary excavation and earth work, connecting at ends, jointing etc complete all as specified and directed .
M & L for replacement of U/S plate earthing with bore well earthing by drilling bore with bore machine for lightening protection system using GI pipe heavy duty 50 mm dia as earth electrode driven up to a depth of 50 meters below ground level, duly made holes at 20 cm intervals, along the length of GI pipe and providing the charcoal salt mixture incl GI pipe 150 mm dia light grade as protection upto a depth of 12 meters and GI strip of 32x6 mm so as to acheive desired earth results. Testing and commissioning complete all as specified and directed. (Earth strip of size 32x6mm upto a length of 7.5m is deemed to incl in this item rate).
m/s sai construction company,bijarar
Devi Engineeing
stage.html
html • 0.05 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .