SPECIAL REPAIR TO CERTAIN PORTION OF POWER HOUSE P 35 AT AF STN SINGARSI UNDER AGE I AF SINGARSI

Amount

Demolition of cement concrete (unreinforced) in roofs, floors other than ground floors beams staircases, landing, chajjas and similar suspended work complete all as specified and as directed by Engineer-in-Charge.

M & L for 25mm thick PCC type B-0,1:2:4 (12.5 mm Graded stone aggregate) as in roof padding complete all as specified and as directed by Engineer-in-Charge.

M &L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortal (1.4) mixed with water proof compound for external brick surface finished even & smooth without using extra cement complete all as specified. Note:- WPC will be measured and paid separately.

M & L for cleaning the roof surfaces and applying bitumen primer @ 0.3 kg/sqm, providing and laying 3mm thick APP modified water proofing membrane weighing not less than 3.00 kg/sqm reinforced with non woven polyester mat weighing not less than 150 gm/sqm, having softening point not less than 800 N /Sq cm, tearing strength of 180N, with minimum of 10 cm side laps and 15cm end laps, laying by application of torch, and applying industrial bitumen 85/25 @ 1.2 kg/sqm on top surface complete all as specified and as directed by Engineer-in-Charge.

M&L for applying two coats of aluminium paint on top surface the roof surfaces after preparation of surfaces complete all as directed by the Engr-in-charge.

Taking down chowkat or frame with shutter (without taking off shutter from the frame) exc. 1.5 sqm but n exc 4 Sqm each, making good disturbed surfaces and removing materials from site of work complete all as directed by the Engr-in-charge.

Taking down chowkat or frame with shutter (without taking off shutter from the frame) n.exc. 1.5 sqm each, making good disturbed surfaces and removing materials from site of work complete all as directed by the Engr-in-charge.

M&L for power coated aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in- charge.

M&L for powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified.

S&F powder coated aluminium shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge etc complete all as specified and directed.

S&F 5mm thick tinted glass of dark shed and fixed with rubber packing or similar items of packing materials etc. complete all as specified and as directed

Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc. complete all as directed.

M &L for rendering 20 mm thick (12+8mm) in two layers on fair faces of brick work or concrete surfaces in cement mortal (1.4) mixed with water proof compound for external brick surface finished even & smooth without using extra cement all as specified and as directed. Note:- WPC will be measured and paid separately.

Supply only Integral water proofing compound.

M &L for rendering 15 mm thick other than fair faces of brick work or concrete surfaces in cement mortal (1.6) for internal brick wall finished even & smooth without using extra cement complete all as specified and as directed.

M&L for preparation of old treated steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint of 1st grade quality complete all as specified and as directed.

M&L for cutting out cracks to V-section in existing concrete surfaces, cleaning out, wetting, grouting with cement mortar (1:3) complete all as specified and as directed

M&L for preparation of new plaster surface of wall and apply two coats of 100% Premium acrylic exterior water proof emulsion paint of required shade, VOC less than 50 gm/litre and UV resistance as per IS 15489:2004 (camouflage pattern) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

M&L for preparation of existing surface of wall and apply two coats of 100% Premium acrylic exterior water proof emulsion paint of required shade, VOC less than 50 gm/litre and UV resistance as per IS 15489:2004 (camouflage pattern) with silicon additives @ 1.43 litre/ 10 sqm complete all as specified and directed.

M&L for preparation of old treated surfaces of wood or wood based surfaces not otherwise described over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of newly plastered surface of wall applying two coat of oil bound distemper over one coat of alkali resistant priming primer over 1 to 2 mm thick wall care putty etc complete all as specified and as directed.

M&L preparation of old plastered surfaces of wall and applying two coats of distemper oil emulsion complete all as specified and as directed.

Material and labour for preparation of old ceiling surfaces and applying one coats of white wash including all necessary scaffolding etc complete all as specified and directed

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) as in slabs, chajjas, beams etc (ground floor) complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for etc. complete all as specified and as directed.

M&L for PCC 1:4:8 type D2 (using 40mm graded aggregates) in foundation filling and mass concrete complete all as specified and as directed.

M&L for 100 mm thick plain cement concrete 1:3:6, type C-2 (using 40mm graded aggregate) as in sub-base floor complete all as specified and as directed.

M&L for 15mm thick cement plaster in cement mortar (1:6) on fair faces of brickwork or concrete surfaces and finished even and smooth complete all as directed.

M&L for preparation of new plastered surface of wall and applying two coats of cement based paint complete all as specified and as directed.

M&L for Non-skid colour ceramic tiles 7 to 8 mm thick ( square/rectangular) area of each tiles exc 0.11 sqm but not exc 0.18 sqm as in floors set and jointed in cement slurry and pointed in white or colour cement to match existing surfaces complete all as specified and as directed.

Material and labour for glazed ceramic tiles of size 450mm x 300mm x 6 to 7mm thick coloured tiles on vertical surfaces of wall etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface complete all as specified and as directed.

S&F Aluminium anodised barrel tower bolt 150 mm long of extruded section etc complete all as specified and as directed

S&F 100 mm stainless steel butt hinges, medium weight, cold rolled, complete all as specified

S&F Aluminium handles, 150 mm size, cast type anodized complete all as specified and directed.

S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (style) with 2, 4 or 6 raised panel design with 2mm thick moulded PVC prelim sheet on the front face & 2mm thick plprelam PVC sheet on back face fixed in frame complete all as specified and as directed.

S&F solid PVC door frame size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet, reinforced with mild steel square tube complete all as specified and as directed.

S&F 4mm thick frosted glass of ordinary quality and glazing with oil putty or wooden bedding to wooden frame or steel frame in square n exc 0.50 sqm each pane complete all as specified and as directed.

S&F vitreous China premium quality/1st quality wash down water closet wall hung EWC white closed pattern including all necessary accessories (excluding flushing cistern and flush pipe) complete all as specified and as directed.

S&F of PVC valve less, syphonic action type, low level flushing cistern 10 Ltrs capacity with inlet, ball valve, float and handle including brackets (excluding flush/discharge pipe) complete all as specified and directed.

S&F vitreous china WHB 550x400mm size white flat back with brackets including cutting or pinning ends of brackets or erecting stand (excluding waste pipe) complete all as specified and directed. (Make: Hindware or Parry)

S&F in repairs of PVC connections 15mm size with PTMT nuts of length 450mm to flushing cistern and WHB complete all as specified and directed .

S&F 15 mm bore pillar taps fancy type (swan neck) cast copper alloy with capstan heads chromium plated screwed down high pressure with or without letter hot or cold with long screwed and shanks and fly nuts screwed for iron pipes complete all as specified and as directed.

S&F 15 mm bore angle stop valves cast copper alloy screwed down high pressured with butterfly handle screwed both ends for iron pipes fancy type chromium plate with long shank and cup (concealed type) complete all as specified and as directed.

S&F 15 mm bore stop valves cast copper alloy screwed down high pressured with butterfly handle screwed both ends for iron pipes fancy type chromium plated complete all as specified and as directed.

S&F in repairs bib tap 15 mm bore cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule fancy type, chromium plated with long shank & cup complete all as specified and as directed.

S&F Brass chromium plated fancy type bottle traps of 32 mm bore for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and as directed.

S&F Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and as directed

S&F tubular towel rail 600mm long PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms) complete all as specified and as directed

S&F 15mm bore GI tubing medium grade with all fittings fixed to walls or laid in floors in concealed type complete all as specified and directed by Eng-In-Charge.

S&F 20mm bore GI tubing medium grade with all fittings fixed to walls or laid in floors in concealed type complete all as specified and directed by Eng-In-Charge.

S & F 100 mm dia CI (sand cast) waste and vent pipes in any length with or without ears fixed with cement joints laid in trenches or in floor complete all as specified and directed.

S & F 100 mm bore CI bend (Sand cast) of any radius with oval access door including jointing with cement joints complete all as specified and as directed

S & F 100 mm bore CI bend (Sand cast) of any radius with duck's foot or heel rest including jointing with cement joints complete all as specified and as directed

S&F 110mm bore PVC (SWR), junction single, (Single T) equal or unequal complete all as specified and directed

S&F 75 mm PVC (SWR) as in drain pipes single socketed in any length with rubber ring joints fixed to walls or floors complete all as specified and as directed

S&F 75 mm bore PVC (SWR) bends any radius complete all as specified and directed

S&F grating doom 100mm dia of PTMT (minimum weight 25 gm) for floor trap/nahani trap all as specified and directed.

S&F of 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement etc complete all as specified and as directed

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and as directed

Material and labour for 75mm thick PCC 1:2:4, type B-2, (using 40mm graded aggregate) as in sub base floor or plinth protection complete all as specified and as directed

Material and labour for screed bed or bedding layer of 15mm thick cement mortar (1:6) for laying floor finish all as specified as directed.

Material and labour for Chequered cement concrete tiles 300mm x 300mm x 25mm thick, with gray cement and pigment, set, jointed and pointed in neat cement slurry in floors complete all as specified and directed

Material and labour for wall care putty 1 to 2mm thick in old plastered surfaces after preparation of surfaces complete all as specified and directed

M&L for PCC block for kerb stone of size 20cm x 30cm, dressed so that the maximun depression from a straight edge held against the dressed surface shall not be exceed 6mm for top and exposed surface of sides and 20mm for the rest of surfaces jointed in cement mortar 1:6 and struck flush etc.complete all as specified.

M&L for double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel, cover governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified.

Note : Prior to commencement of the subject works, the contractor needs to submit valid Electrical License in the name of himself/them self or Agreement with agency having valid Electrical License alongwith Agency's Electrical License to the Accepting Officer for his approval through GE/AGE(I). In absence of such documents, no work will be executed at site and to be treated as defaulter on the Contractor's part . In addition, Supervisor for execution of electrical works employed by the Contractor shall posses Supervisory Certificate of competency issued by concerned State Govt/Union Territory and the Worker/Tradesman for execution of Electrical Works must hold necessary permit issued by concerned State Govt/Union Territory.

Taking down carefully unserviceable copper / aluminium point wiring (light, fan, bell socket or power) including all fittings such as switches, socket, ceiling roses , regulators and fittings complete and making good the disturbed surfaces all as directed by Engineer-in-Charge.

M&L for point wiring for one light/fan/bell with single core PVC insulated and unsheathed stranded FRLS copper conductor cable 1100 volts grade size 1.5 Sqmm (nominal area) in and including PVC casing capping 25/20 mm width with one single core PVC insulated unsheathed 1.5 Sqmm (nominal area) stranded FRLS copper conductor as earth continuity wire and connected to earth dolly including PVC switch board on existing wall surface for one light/fan point /bell point controlled by one number one way switch & making good the disturbed surface to match with existing surface/wall complete all as specified and as directed.

All as per Item No 66 here-in-before but for one 5 pin socket outlet 5 Amps on independent board with 1.5 Sqmm complete all as specified and as directed.

All as per item No 66 here-in-before but for one 5 pin socket outlet 15 Amps on the independent board with 2.50 Sqmm copper cable & 2.50 Sqmm earth continuty wire complete all as specified and as directed.

S&F for switch socket combination 5 Pin 6 Amp universal complete all as specified and as directed.

S&F for switch socket combination 5 Pin, 6/15 Amp universal complete all as specified and as directed.

S&F for switch piano flush type 6 Amp one way complete complete all as specified and as directed.

S&F for ceiling fan regulaor electronic step type , solid state, 120W, 2 module, 240 Volts complete all as specified and as directed.

S&F in repair for wall mounted LED fittings 20 watt trimline model 5700k 6500k lume efficiency>100/watt pf>0.90, extruded polycarbon heat sink provided for energy efficient heat dissipation & integraed electronic with all accessories and with lamp internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed by Engr-in-Charge. Make: Crompton Greaves (Model No : LDL-20-CDL) or equivalent make of GE/ Philips.

S&F in repair of 100 W LED flood light fitting, IP 66 protected luminaire fixture made from pressure die cast aluminium housing & heat resistance toughened glass cover inbuilt 150W driver, having wide operating voltage range & lumen efficiency >150lm/w. Surge protection upto 10 KV PF>0.95 temp 5700K to 6500K IP 66, surge protection 10KV as directed by Engineer-in-Charge including taking out old U/S street light fitting of any type/size. Make: Surya/ CG/Philips/GE

M&L Submain wiring with PVC indulated FRLS copper conductor cable unsheathed for circuit along with earth wire including PVC casing caping of suitable size with accessories fixed to wall complete after taking down old sub main wiring complete and making good the disturbed area for 3 runs 2.5 Sqmm (01 No phase conductor 01 no neutral conductor, 01 earth continuity wire complete. (Note:- 3 runs of 2.5 Sqmm and one run of casing caping shall be measured and paid as one length.)

M&L Submain wiring with PVC indulated FRLS copper conductor cable unsheathed for circuit along with earth wire including PVC casing caping of suitable size with accessories fixed to wall complete after taking down old sub main wiring complete and making good the disturbed area for 3 runs 4.0 Sqmm (01 No phase conductor 01 no neutral conductor, 01 earth continuity wire complete. (Note:- 3 runs of 4.0 Sqmm and one run of casing caping shall be measured and paid as one length.)

MCB DB double door, IP 43 protection single pole and neutral 8 way sheet steel phospetised powder painted complete.

MCB TPN 32 Amps, 240V, 50Hz, 10KA of capacity all as specified.

MCB SPN upto 40 Amps, 240V, 50Hz, 10KA of capacity all as specified.

MCB SP 6 to 30 Amps, 240V, 50Hz, 10KA of capacity all as specified.

M&L for VTPN DB 6 way 415V, 50Hz double/single door, IP 43 protection with 200 Amps rated bus bar for provision MCCB 4P as incommer and MCBs for outgoing circuits complete, fill empty with blanks, making good the surface area complete all as specified and as directed.

MCCB 100 Amps, 3 pole 415 V, 50Hz, 16KA of capacity for fixing in VTPN DB's 6 way complete all as specified (DB for Acs)

M&L for single pole and neutral enclosure with a three pin earth plug and socket complete with one single pole MCB of 20A SPN, C-Curve, 50Hz, 415 Volts complete all as specified and as directed.

M&L for earthing complete with galvanised steel earth plate electrode 60x60cm x60mm thick, buried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5 metres below nomial ground level connected to galvanised earth strip of size 32 x 6mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 connected to earthing test point all as specified or indicated including testing or completion.

Dismantling complete exhaust fan of size 300/380 mm sweep from site, unscrew the body parts, taking out starter winding ball bearing, gun metal bush etc and replace with new one if required and carry out the following repairs:- (a) Removing of burnt out exhaust winding and re-winding of motor with suitable size of copper enamelled wire, varnishing heating as per manufacturers design and directed and re-assembling.

S&F flame proof LED light fitting 2x40 watt with wire guard and reflector as per IS-2206-3(1989) complete all as specified and as directed. Make: Sudhir/FCG

S&F flame proof 16A 415V rotary switch ON/OFF as per IS-2206-3 (1989) complete all as specified and as directed. Make: Sudhir/FCG

S&F flame proof Distribution Board 6 was as per IS-2206-3 (1989) complete all as specified and as directed. Make: Sudhir/FCG

M&L for point wiring complete with 1100 Volts, FRLS Grade, 1.5 Sqmm. Single Core, PVC insulated, Unsheathed, Multistranded Copper Conductor Cable, confirming to is- 694 drawn through and including heavy duty Metal Conduit, 20mm dia including all accessories after taking down old wiring complete concealed in Walls/ Roofs/ Floors/ Ceiling etc. fixed on wall including 1100 Volts, FRLS Grade, 1.5 sqmm, single core, PVC insulated, Unsheathed Multistranded Copper Conductor cable as earth continuity conductor with colour coding and connecting to Earth Dolly for One flame proof light point complete all as specified.

M&L Sub main wiring with 2 runs of 4 Sqmm single core, in steel conduit, unsheathed, Multistranded Copper Conductor cable 1100 Volts, FRLS Grade, ISI Marked, drawing through and including after taking down old sub main wiring complete heavy duty metal conduit 25mm dia with all accessories fixed on walls/ roofs/ floors/ ceiling etc. including one run of 4 Sqmm, Single core, PVC insulated, unsheathed, multistranded copper conductor cable 1100 Volts FRLS Grade earth continuity conductor complete all as specified. [Note: 3 runs of 4 Sqmm & one run of 25 mm dia PVC Conduit will be measured as one unit]

M/S Subhadip Enterprise

M/S AMARNATH AGARWALLA

LALAN SHARMA

M/S KUMAR AVINASH

M/S MBS TRADING CO

M/S ASHA ENTERPRISE

M/S SINGH ENTERPRISE

M/S New Builders Corporation