CWE/FZR- /2021-22 Special repairs to bldg No P-46 (01 to 12 qtrs) in 550 Acre area under GE (East) Ferozepur Cantt

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), complete all as specified.

M&L for Non skid Ceramic coloured (colour and shade as approved) tiles, of size 300x300x7mm thick as in flooring, set and jointed in neat cement slurry and pointed in white cement with pigment to match the colour of tiles laid over & including 15 mm thick screed in cement mortar (1:6), complete all as specified.

M&L for Non skid Ceramic coloured (colour and shade as approved) tiles, of size 400x400x7mm thick as in flooring, set and jointed in neat cement slurry and pointed in white cement with pigment to match the colour of tiles laid over & including 15 mm thick screed in cement mortar (1:6), complete all as specified.

All as per item No 03 herein before but as in skirting including backing coat 10mm thick in cement mortar (1:4), complete all as specified.

M&L for Glazed ceramic tiles, coloured (colour & shade as approved), of size 300x200x6.5 mm thick on vertical surfaces such as in skirting/dado etc set and jointed in cement slurry and pointed in white cement with pigment to match the colour of tiles, laid over & including 10 mm thick backing coat in cement mortar (1:4), complete all as specified.

M&L for Kota stone slabs, 20mm to 25mm thick, machine cut as in flooring of size not less than 0.25 Square metre each, set and jointed in cement slurry and pointed in cement mixed with pigment to match the shade of slab laid over & including screed bed of 20 mm thick in cement mortar (1:6) including rubbing, cutting and polishing (mirror type) complete all as specified.

S&F Kota stone slabs, 20mm to 25mm thick, machine cut as in shelf, skirting, steps, dado, pillars etc, set and jointed in cement slurry and pointed in cement mixed with pigment to match the shade of slab laid over & including rendering coat of 10 mm thick in cement mortar (1:4) including rubbing, cutting and polishing, complete all as specified.

Demolition of un-reinforced cement concrete in ground floor and paving not exceeding 15cm thick (below/above ground level), complete all as specified.

M&L Cement concrete (1:3:6) type C-1 (20 mm graded stone aggregate) as in filling of steel chowkhats and bed blocks of hold fast including necessary formwork, complete all as specified.

M&L for Cement concrete (1:3:6) type C-1 using 20 mm graded stone aggregate as in 50mm thick plinth protection, surfaces finished even and fair without using extra cement including provision of construction joints complete all as directed by Engr-in-Charge and as specified.

Taking down cement plaster from brick walls of any description, racking out joints, hacking for key, scrubbing down with water etc, complete all as specified.

M&L for Rendering 15 mm thick in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement, complete all as specified.

M&L Preparation of newly plastered surfaces of walls & applying two coats coats of oil bound distemper over a coat of chalk whitning primer complete all as specified.

M&L Preparation of old decorated plastered or unplastered by brooming down with steel wire brush, scarping down smoke soot, mould, moss and efflorescent salts and trading oil, greasy spots and applying two coats of cement base paint, complete all as specified.

M&L Preparation of old decorated plastered or unplastered by brooming down with steel wire brush, scraping down smoke soot, mould, moss and efflorescent salts and trading oil, greasy spots and applying two coats of oil bound distemper, complete all as specified and as directed.

M&L Preparation of old decorated plastered or unplastered surfaces by brooming down with steel wire brush, scarping down smoke soot, mould, moss and efflorescent salts and trading oil, greasy spots and applying one coat of white wash on ceiling including cornices, pillasters etc, complete all as specified and as directed.

M&L for Taking down wooden/steel chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 Square metre each including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts,making good jambs with plaster in CM(1:4) to match with existing finish and removing from site, complete all as specified.

All as per item No 17 herein before but size exceeding 1.5 Square metre and not exceeding 4 Square metre each, complete all as specified.

Taking down door shutter of any description, exc 1 Sqm but not exceeding 2 sqm each and refixing in the same opening after resecuring, or easing & adjusting,complete all as specified.

Taking down door shutter of any description, exc 1 Sqm but not exceeding 2 sqm each, complete all as specified.

S&F Factory made pressed steel frames made of 1.25 mm thick MS sheet of profile 105 mm X 60 mm for door and window frames with one or more rebates including lock strike plate, shock absorber, 20 mm dia 60 mm long MS conduit for housing of a drop bolt,hinges, hold fasts/lugs etc, treating of internal surfaces of chowkhats with coal tar or black paint including hold fasts/lugs etc complete all as specified.

S&F Factory made pressed steel frames made of 1.25 mm thick MS sheet of profile 125 mm X 60 mm for door and window frames with one or more rebates including lock strike plate, shock absorber, 20 mm dia 60 mm long MS conduit for housing of a drop bolt,hinges, hold fasts/lugs etc, treating of internal surfaces of chowkhats with coal tar or black paint including hold fasts/lugs etc complete all as specified.

S&F Factory made, 35mm thick, 2nd class hard wood (Hollock), plain framed, panelled shutters, any number of panels, panels shall be of 9 mm thick B.W.P. commercial ply or 12mm thick BWR grade veneered particle board medium density, wood particle board with commercial face veneers, size of members as specified in clause 8.24(a) of MES Schedule Part-I section-8 complete all as specified.

S&F Factory made 35 mm thick,2nd class hard wood (Hollock), glazed and skeleton shutters open rebated and prepared to receive glass/ gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass/gauge etc for doors, size of members as specified in clause 8.24 (a) of MES Schedule Part-I Section-8, complete all as specified.

S&F 300 mm ordinary rat tail rod pattern spring including roller and roller plate complete all as specified.

M&L Mild Steel Framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc, complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing, complete all as specified.

S&F Framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work, complete all as specified.

S&F Factory made solid PVC door frame (having density not less than 600 kg/cum) of size 50 mm x 47 mm made of 5 mm plain colour PVC sheet reinforced with mild steel square tube, complete all as specified in MES Schedule Part-I (2009), including making good jambs in CM(1:4) with finishes to match with existing, complete all as per specification & shown in drawing.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site ,complete all as per specification in MES Schedule Part-I (2009) & drawing.

S&F PTMT tower bolts, 200 mm long and fixed with steel screws complete all as specified.

S&F PTMT butt hinges, 100 mm long and fixed with steel screws complete all as specified.

S&F PTMT door handle, 125 mm long and fixed with steel screws complete all as specified.

S&F Aluminium handle, aluminium anodized, 150 mm long cast type and fixed with steel screws complete all as specified.

S&F Aluminium alloy, anodised, barrel tower bolts, 200 mm long and fixed with steel screws complete all as specified.

S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified.

S&F Factory made box type steel window with pintle hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEJZ/TD-1019 Sheet 01 to 03 & CEJZ/TD-1020 Sheet 01 to 03

S&F Factory made box type steel window with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEJZ/TD-1019 Sheet 01 to 03 & CEJZ/TD-1020 Sheet 01 to 03

S&F Factory made box type steel ventilator with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEJZ/TD-1019/08 sheet 1/3 to 3/3.

S&F 3mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads (supplied alongwith shutters), in squares n.exc 0.50 Sqm complete all as specified.

S&F 3mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads (supplied alongwith shutters), in squares n.exc 0.50 Sqm, incl hacking out old broken glass complete all as specified.

S&F Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified

M&L for Preparation of new wooden or wood based surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

M&L for Preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over priming with a coat of red oxide, zinc chrome primer complete all as specified.

S&F 500 litres capacity rotational moulded, triple layer polythene water storage tanks (cylindrical vertical with closed top) hoisting and fixed in position on roofs including fittings & dismantling existing water storage tank, complete all as specified.

S&F 20mm bore brass ball valve high pressure with polythene float and fly nut complete, screwed for iron pipe or brass ferrule, complete all as specified.

M&L APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified.

M&L for Rendering/plastering, 10 mm thick in cement mortar (1:3) on vertical surfaces of sunken portion wall and applying bitumen blown any grade, applied hot, two coats, to concrete surfaces at the rate of 1.5kg. per sq. m per coat and treating the sunken floor, complete all as specified.

M&L for cement conceret (1:5:10) type E-2 using 40mm graded aggregate in foundations, fillings and mass concrete, complete all as specified.

S&F Vitreous china white squatting pan orrissa pattern of size 580mm x 440 mm with integral foot rests including necessary lime concrete and 100 mm bore cast iron ‘P’ or 'S' trap with 550 to 600 mm long neck for connecting WC to branch piece with cement joints, fixed as in repair, complete all as specified.

Taking up or down 15 mm bore existing steel water tubing alongwith connections fixed/laid in any situation, complete all as specified

Taking up or down 20 mm bore existing steel water tubing alongwith connections fixed/laid in any situation, complete all as specified

S&F Galvanised steel water tubing, 15 mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors including cutting and making good, complete all as specified.

S&F Galvanised steel water tubing, 20 mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors including cutting and making good, complete all as specified.

Re-Fixing only, steel water tubing, 15mm bore and connections in new or old position using new fittings fixing to wall/ceiling or laid in floors complete all as specified.

Re-Fixing only, steel water tubing, 20mm bore and connections in new or old position using new fittings fixing to wall/ceiling or laid in floors, complete all as specified.

S&F 15mm stop valve cast copper alloy with crutch or butterfly handle ,screwed down screwed for iron pipe or for brass ferrule, complete all as specified.

S&F 15 mm bore bib tap of, cast copper alloy chromium plated, screwed down, high pressure with crutch or butter fly handle, complete all as specified.

S&F PTMT shower roses swivel type 125mm size (Minimum Wt 40 Grms) with or without joints, including fixing to 15 mm steel pipe or union, complete all as specified.

S & F Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms), all as specified

S&F tubular towel rail, 20mm dia of 600mm long with fancy type brass chromium plated brackets on both sides and fixed with steel screws and wooden/rawl plugs, complete all as specified.

S&F Mild steel curtain rod 20mm dia PVC powder coated with fixing side brackets, end cups, rings @ 10 Nos per RM and fixed with PVC rawl plugs & steel screws as in repairs complete all as specified.

S&F20 mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified

S&F 15 mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified

S&F in repair PVC syphonic action type low level flushing cistern (white) of 10 liters capacity with inlet ball float valve, 32 mm PVC flush pipe and necessary fixing arrangements and connecting to water pipe, complete all as specified .

S&F PVC connection 15mm size with brass nuts on both ends, 450mm long with PTMT nuts complete all as specified.

Dismantling CI pipe alongwith fittings of 75/100mm dia, below or above ground level or laid in floors, jointed in cement mortar and taking out complete all as specified.

S&F 100mm bore cast iron soil, waste and vent pipe, sand cast, in any length with or without ears with cement joints laid in trenches or in floors, complete all as specified.

S&F 75mm bore cast iron soil, waste and vent pipe, sand cast, in any length with or without ears with cement joints laid in trenches or in floor, complete all as specified.

S&F 100mm bore cast iron soil, waste and vent pipe, sand cast, in any length with or without ears with cement joints, fixed to wall, complete all as specified.

S&F 75mm bore cast iron soil, waste and vent pipe, sand cast, in any length with or without ears with cement joints, fixed to wall, complete all as specified.

S&F 100 mm bore, cast iron bend (any radius), diminishing pieces or tapers (larger bore measured) with cement joints complete all as specified.

S&F 75 mm bore, cast iron bend (any radius), diminishing pieces or tapers (larger bore measured) with oval access cement joints, complete all as specified.

S&F Cast iron floor trap for 75 mm bore pipe with cast iron grating including jointing to waste pipe in run lead fixed in cement concrete type B-1 (1:2:4), complete all as specified.

S&F 100mm dia PVC grating with waste hole of (Minimum weight 25gms), complete all as specified.

S&F, 110mm bore PVC rain water pipes, fixed to walls incl MS clamps with nuts & bolts as in repair, complete all as specified.

S&F galvanised steel water tubes 40 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and as directed.

S&F stainless steel sinks 1 mm thick kitchen or laboratory with plugs, washers, CP coupling and waste pipe including bedding in cement mortar fixed in RCC cooking platform including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm & bowl size 410mm x 330mm x 160mm, complete all as specified.

M&L for (table dressed and pre-polished) green marble slab, 16 mm thick of size not less than 1.00 square metre each, as in cooking platforms, steps, jambs, pillars, window cills and like, set and bedded in grey cement slurry over & including 20 mm thick screed in cement mortar (1:4) and pointed in white cement (1:2) with admixture of pigment to match the shade of marble (mirror type polished) complete all as specified.

Dismantling of brick tiles single layer jointed & pointed in cement mortar including removal of grass vegitation, complete all as specified.

Demolition of mud phuska in roofs, any thickness, including leeping plaster (whether full thickness removed or only a part thereof) complete all as specified.

M&L for screed bedding 10 mm thick in cement mortar (1:4) concrete surfaces of roof, mixed with WPC (WPC shall be measured and paid seaparately), finished even and smooth without using extra cement etc, complete all as specified.

Supply only integral water proofing compound complete all as specified.

S&F 150 micron thick (transparent) polythene film with 150mm end & side laps, laid over a coat of bitumen primer 0.50 kg per sqm, bonded with a coat of 80/100 industrial bitumen @ 1.20 Kg/sqm and laid on roof, complete all as specified.

M&L 80 mm thick average, consolidated thickness, mud phuska on flat roofs, including 25 mm thick mud plaster, complete all as specified.

S&F 40 mm thick brick tiles laid over a layer of 25mm thick mud mortar and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement, complete all as specified.

All as per item above item No 86 herein before but using old brick tiles retrieved from dismantling including cleaning and removal of mortar from tiles.

M&L Cement concrete (1:2:4) type B-0 (12.5 mm graded stone aggregate) as in kerbs, mud stops, round or chamfered on edges etc including form work, weathering, slightly rounded or chamfered complete all as specified.

Taking down carefully existing copper/alumimium point wiring for light/fan/socket out let points complete with fitting and fixtures, ceiling fan, battens, wire etc and making good the disturbed surfaces of walls and ceilings, complete all as specified.

Taking down unserviceable main switches and distribution boards single phase complete all as specified.

Taking down carefully old unserviceable sub main wiring and making good disturbed sufaces and matching with existing complete all as directed and specified.

M&L Point wiring complete with 1100 volts grade PVC FRLS insulated unsheathed cable of copper conductor, multi stranded of size 1.5 Sqmm, single core, drawn through & including PVC rigid concealed conduit, medium grade of suitable size (not less than 20mm dia )duly ISI marked with all accessories such as bends, reducers, spacers, saddles, junction boxes, bakelite sheets, sizes for mounting switch/sockets, fan regulators etc complete with and including continuous earth wire of size 1.5 Sqmm, single core, PVC FRLS copper conductor, insulated, unsheathed,stranded (Green colour) connected to common earth dolly complete all as specified for One light/fan/bell/exhaust point controlled by one single pole one way switch.

(b) One 3 pin 5 Amp socket outlet point controlled by one switch on Independent board .

(c) One 3 pin 5 Amp socket outlet point controlled by one switch on same board.

All as per item 92 above, but one switch socket outlet multi purpose, 3 pin, 15 Amps, point to be controlled by one switch and wiring with 2.5 Sqmm PVC FRLS cable, insulated, stranded, unsheathed copper conductor on Independent board with continuous earth wire of size 2.5 sqmm, PVC copper conductor, insulated, unsheathed, stranded, complete all as specified.

All as per item 92 above, but one switch socket outlet multi purpose, 3 pin, 15 Amps, point to be controlled by one switch and wiring with 4 Sqmm PVC FRLS cable, insulated, stranded, unsheathed copper conductor on Independent board with continuous earth wire of size 4 sqmm, PVC copper conductor, insulated, unsheathed, stranded, complete all as specified.

S&F Switch, piano, flush type, single pole one way, 6 Amps, ISI marked, complete all as specified.

S&F Switch piano flush button type 20 Amps, single pole, one way,ISI marked, complete all as specified.

S&F Socket outlet,2 in 1, 5 pin ,6 Amp, piano flush type,ISI marked, complete all as specified.

S&F Socket outlet 2 in 1, 6 pin, 20 Amp, piano flush type,ISI marked, complete all as specified.

S&F Bell push Switch, flush type, 6 Amps, single pole one way, ISI marked, complete all as specified.

S&F Bell, Ding Dong AC 240 volts single phase complete all as specified.

S&F Ceiling rose, surface type, 240 volts, 50 HZ, 6Amp, backelite 65mmx50mm, 3 terminals complete all as specified.

S&F batten holder, (with metal ring) 240 volts, 50 HZ, 6 Amp, including LED bulb of 9 watts, B22, 6500K, complete all as specified.

S&F rotary stepped type electronic fan regulator for ceiling fan 1200/1400mm size,240 volts,6 Amps, 100 W deluxe, complete all as specified.

S&F 20W, 6000 K, 4 feet LED square tube light fitting, energy efficient, fixed to walls/ ceiling etc complete, complete all as specified.

S&F Factory made sheet metal enclosures double door type made out of CRCA 1.2 mm thick M.S sheet,powder coated, VTPN DB with 200 Amps rated bus bar, 4 way, FP-42 protection surface mounting, 415 volts, dust and vermin proof, suitable for incorporation of MCCBs duly concealled in wall, factory made, including MCCB adjustable thermal & fixed magnetic type, 4 pole, 100 Amps, 50 Hz, 415 volts with rupturing capacity 16 KA and making good disturbed surfaces with matching colour, complete all as specified.

S&F Factory made sheet metal enclosures double door type made out of CRCA 1.2 mm thick M.S sheet,powder coated, vertical distribution board, 200 Amps, 8 way, 240 volts 50 HZ, dust and vermin proof, fitted with two cover, one screwed cover for incoming and outgoing MCBs and the second for protection of MCBs fitted with colour bus bar, neutral link, earth bar and din rail, suitable for use on partly immersed in wall, including making good disturbed surfaces with matching colour, complete all as specified.

S&F in repairs MCB, SPN, 40 Amps, 240 volts 6 to 32 Amps10 KA 'B' series, complete all as specified.

S&F in repairs MCB, single pole, 240 Volt, 6-32 Amps,10 KA 'B' series, complete all as specified.

S&F for sub main wiring with two single core PVC insulated unsheathed stranded copper conductor cable FRLS 2x6 Sqmm single core 650/1100 V, drawn through & including rigid PVC non metallic concealed conduit 25 mm dia including continuous earth wire of size 1x6 sqmm, PVC insulated and unsheathed cable copper stranded conductor (green colour) complete all as specified. NOTE:-Two runs of cable,1 run of earth wire & one run of PVC conduit shall be measured as one length.

S&F heavy duty, 900 RPM Exhaust fan AC single phase 230/240 Volts of 300mm sweep with louver plastic body, including provision of PVC flexible copper cable of size 23/00.0076 three core from ceiling rose to exhaust fan max 1.5 mtr for giving connection & louvers complete all as specified.

Cutting hole of suitable size, making good, the disturbed surface, grouting nuts & bolts for fixing of exhaust fans, complete all as specified.

M&L for disconnecting electric meter of any capacity and refixing the same after rewiring, in meter box including connection complete all as specified.

S&F metal sheet meter box single door of minimum size 30x50x25cm for electric meter factory made of MS sheets/CRCA sheet duly painted with powder coated paint and locking arrangement conforming to IS 5039 of 1983. The electric meter/switch box shall be suitable for fixing one number of electric meter and knock out holes for incoming and outgoing cables. Before the powder paint process the sheet shall go through the anti corrosion conditioning process in not less than seven tank process, complete all as specified.

Hanging only ceiling fan, height upto 3m to 5m ceiling height and connecting up including provision of 3 core FR PVC insulated and overall round sheathed flexible cable of size 23/00.0076 from ceiling rose or connector to fan, complete all as specified. Note:- ceiling fan shall be obtained from item No 89

M&L for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire, complete all as specified.

M& L Earthing as in repairs complete, all as shown on electrical plate No 3 of MES schedule part-I, and as specified including the following :-(i) Galvanised steel earth plate of size 60cmx60cmx6mm thick burried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of earth plate at a depth not less than 1.50 metre below normal ground level.(ii) Earth plate surrounded by and packed with char-coal and common salt in alternative layers (n.exc 15cms each layer).(iii) 4 mm dia (8 SWG) G.I earth wire from earth plate to main switch board including necessary GI bolts, nuts check nuts, washers, thimbles etc.(iv) 15 mm bore light grade, GI pipe for protection to earth-strip.(v) 20mm bore, medium grade GI pipe for watering including GI funnel and wire mesh. Pipe shall be provided vertically upto top level of earth pit and then taken horizontally to the earth pit. (vi) 50mm thick pre-cast cover of cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate and MS angle iron 25x25x3mm frame including two coats of painting over a coat of red oxide to exposed steel surfaces.(vii) Excavation in soft/loose soil, returning filling & removal of surplus soil to a distance upto 50 metre as directed.

S&F stationary water heater (Geyser) vertical storage type, steel body with copper inner tank, and heating element upto 2 KW, electric driven, (5 star rated marked) of capacity 25 Ltrs, including provision of bolts, nuts and washers, size of the bolt 15 cm long, 12 mm dia embedded in wall, complete all as specified.

S&F gun metal non return valve suitable for 15 mm bore pipe, complete all as specified.

S&F PVC connection 15mm size with brass nuts on both ends, 450mm long with 2 Nos of brass nuts and washer for cold water supply, complete all as specified.

S&F PVC connection 15mm size with brass nuts on both ends, 450mm long with 2 Nos of brass nuts and washer with steel reinforcement materials suitable for hot water supply, complete all as specified.

S&F XLPE insulated, armoured,1100 volts grade, heavy duty cable of size 25 Sqmm nominal cross section, 4 core, flat or circular, PVC FRLS insulated aluminium conductor, served with inner sheathing of galvanized steel wire or tape and over-all PVC FRLS sheathed in service connections, laid in trenches, duct, through pipe, in floor, on pole including jointing and testing, complete all as specified .

Excavation in trenches in soft/loose soil not exceeding 1.5 metre wide and not exceeding 1.5 metre deep, not exc. 10 Sqm on plan and getting out complete all as specified.

M&L Dry and clean fine sand for cable cushioning to underground cable protection, complete all as specified. (Excavation and earth work measured separately).Note- Punned down thickness shall be measured.

S&F cover to underground cable with one layer of bricks using sub class ‘B’ bricks (old size) laid flat across the cable complete all as specified. (Excavation and earth work measured separately).

Returning, filling in, earth including spreading, leveling watering and well ramming in layer each not exceeding 25cm thick complete all as specified.

Removal of surplus soil to a distance not exc 50 metre and depositing where directed at a level not exc 1.5 metre above the starting point complete all as specified.

S&F Mild steel galvanised pipe, light grade, 40 mm nominal bore for passing of cable, fixed to poles/walls, laid under floor/road crossings, complete with and including clamps, socket & elbow etc,and taking out existing pipe, complete all as specified.

S&F bldg LED Security light fittings 35 watts, 6000K, including GI bracket bend to shape made out of GI pipe light grade of size 25mm nominal bore, suitable size up to 1.2 mtr long etc complete with MS clamps made of 25x3mm MS plate duly painted with two coats of aluminium paint with nuts/ bolts/ washers and all fixing arrangements on wall including connecting up with 2 core copper flexible wire of size 23/00.0076 all as specified and directed.

manoj and company

S S BUILDERS

Karan Engineers

M/s Sarup Singh

M/S Yashpaul Gulati

M/s Sanjiv Kumar

M/s Bansi Lal